• Fireless steam loco

    From boltar@3:633/10 to All on Sunday, November 15, 2026 16:05:34
    Interesting video but given how utterly battered that loco looks particularly around the pressure vessel I wouldn't go within a 100m of it particularly when its being recharged.

    https://www.youtube.com/shorts/JHbYbyaqbqQ




    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Marland@3:633/10 to All on Monday, November 16, 2026 10:31:11
    <boltar@caprica.universe> wrote:
    Interesting video but given how utterly battered that loco looks particularly around the pressure vessel I wouldn't go within a 100m of it particularly when
    its being recharged.

    https://www.youtube.com/shorts/JHbYbyaqbqQ





    Cylinders at the front are unusual for a fireless at least compared to most
    of the ones in the UK.
    The ones here tended to have them to the rear of the wheels almost beneath
    the cab where their weight balanced the steam reservoir which without a smoke box would have the weight of water right to the front, and without
    the need for a blast pipe for a drawing a fire no conventional chimney
    either.
    The example in your link looks far more conventional in layout.
    Looking on the WWW it seems that is how they were built for the Sugar Mill
    but they did also convert some conventional steam locos to fireless.
    GH

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Graeme Wall@3:633/10 to All on Monday, November 16, 2026 11:51:37
    On 16/11/2026 10:31, Marland wrote:
    <boltar@caprica.universe> wrote:
    Interesting video but given how utterly battered that loco looks particularly
    around the pressure vessel I wouldn't go within a 100m of it particularly when
    its being recharged.

    https://www.youtube.com/shorts/JHbYbyaqbqQ





    Cylinders at the front are unusual for a fireless at least compared to most of the ones in the UK.
    The ones here tended to have them to the rear of the wheels almost beneath the cab where their weight balanced the steam reservoir which without a smoke box would have the weight of water right to the front, and without
    the need for a blast pipe for a drawing a fire no conventional chimney either.
    The example in your link looks far more conventional in layout.
    Looking on the WWW it seems that is how they were built for the Sugar Mill but they did also convert some conventional steam locos to fireless.
    GH

    Question, why does a fireless engine have a dome?
    --
    Graeme Wall
    The older I get, the better I was.


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Anna Noyd-Dryver@3:633/10 to All on Monday, November 16, 2026 15:14:55
    Graeme Wall <rail@greywall.demon.co.uk> wrote:
    On 16/11/2026 10:31, Marland wrote:
    <boltar@caprica.universe> wrote:
    Interesting video but given how utterly battered that loco looks particularly
    around the pressure vessel I wouldn't go within a 100m of it particularly when
    its being recharged.

    https://www.youtube.com/shorts/JHbYbyaqbqQ





    Cylinders at the front are unusual for a fireless at least compared to most >> of the ones in the UK.
    The ones here tended to have them to the rear of the wheels almost beneath >> the cab where their weight balanced the steam reservoir which without a >> smoke box would have the weight of water right to the front, and without
    the need for a blast pipe for a drawing a fire no conventional chimney
    either.
    The example in your link looks far more conventional in layout.
    Looking on the WWW it seems that is how they were built for the Sugar Mill >> but they did also convert some conventional steam locos to fireless.
    GH

    Question, why does a fireless engine have a dome?


    Similar reason to a conventional steam locomotive, to keep the steam outlet above the water level.

    A fireless loco isn't simply a pressure vessel containing only steam, it
    would run out rather quickly if that was the case. It actually contains a
    large amount of water (2/3 - 3/4 full IIRC) which releases more steam as
    the pressure reduces.


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From boltar@3:633/10 to All on Monday, November 16, 2026 16:06:06
    On Mon, 16 Nov 2026 15:14:55 -0000 (UTC)
    Anna Noyd-Dryver <anna@noyd-dryver.com> gabbled:
    Graeme Wall <rail@greywall.demon.co.uk> wrote:
    Question, why does a fireless engine have a dome?


    Similar reason to a conventional steam locomotive, to keep the steam outlet >above the water level.

    A fireless loco isn't simply a pressure vessel containing only steam, it >would run out rather quickly if that was the case. It actually contains a >large amount of water (2/3 - 3/4 full IIRC) which releases more steam as
    the pressure reduces.

    Presumably when a fireless loco is recharged whats actually happening is
    the steam reboils the water already there rather than upping the pressure
    by much?


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From nib@3:633/10 to All on Monday, November 16, 2026 16:42:57
    On 2026-11-16 16:06, boltar@caprica.universe wrote:
    On Mon, 16 Nov 2026 15:14:55 -0000 (UTC)
    Anna Noyd-Dryver <anna@noyd-dryver.com> gabbled:
    Graeme Wall <rail@greywall.demon.co.uk> wrote:
    Question, why does a fireless engine have a dome?


    Similar reason to a conventional steam locomotive, to keep the steam outlet >> above the water level.

    A fireless loco isn't simply a pressure vessel containing only steam, it
    would run out rather quickly if that was the case. It actually contains a
    large amount of water (2/3 - 3/4 full IIRC) which releases more steam as
    the pressure reduces.

    Presumably when a fireless loco is recharged whats actually happening is
    the steam reboils the water already there rather than upping the pressure
    by much?

    I suspect you'd have to put in enough steam to re-heat the water to
    match the boiling point or water at the charging pressure. That could be
    quite a bit, eg water boils at around 200C at 250psi.

    nib


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From boltar@3:633/10 to All on Monday, November 16, 2026 16:50:29
    On Mon, 16 Nov 2026 16:42:57 +0000
    nib <news@ingram-bromley.co.uk> gabbled:
    On 2026-11-16 16:06, boltar@caprica.universe wrote:
    On Mon, 16 Nov 2026 15:14:55 -0000 (UTC)
    Anna Noyd-Dryver <anna@noyd-dryver.com> gabbled:
    Graeme Wall <rail@greywall.demon.co.uk> wrote:
    Question, why does a fireless engine have a dome?


    Similar reason to a conventional steam locomotive, to keep the steam outlet >>> above the water level.

    A fireless loco isn't simply a pressure vessel containing only steam, it >>> would run out rather quickly if that was the case. It actually contains a >>> large amount of water (2/3 - 3/4 full IIRC) which releases more steam as >>> the pressure reduces.

    Presumably when a fireless loco is recharged whats actually happening is
    the steam reboils the water already there rather than upping the pressure
    by much?

    I suspect you'd have to put in enough steam to re-heat the water to
    match the boiling point or water at the charging pressure. That could be >quite a bit, eg water boils at around 200C at 250psi.

    I'm guessing that as the steam is used and the pressure drops the water will continue to boil until the point that there's none left or it drops to atmospheric pressure so the pressure inside will always be just at or below the boiling point of the water inside it. Or something like that!


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Graeme Wall@3:633/10 to All on Monday, November 16, 2026 20:54:15
    On 16/11/2026 15:14, Anna Noyd-Dryver wrote:
    Graeme Wall <rail@greywall.demon.co.uk> wrote:
    On 16/11/2026 10:31, Marland wrote:
    <boltar@caprica.universe> wrote:
    Interesting video but given how utterly battered that loco looks particularly
    around the pressure vessel I wouldn't go within a 100m of it particularly when
    its being recharged.

    https://www.youtube.com/shorts/JHbYbyaqbqQ





    Cylinders at the front are unusual for a fireless at least compared to most >>> of the ones in the UK.
    The ones here tended to have them to the rear of the wheels almost beneath >>> the cab where their weight balanced the steam reservoir which without a >>> smoke box would have the weight of water right to the front, and without >>> the need for a blast pipe for a drawing a fire no conventional chimney
    either.
    The example in your link looks far more conventional in layout.
    Looking on the WWW it seems that is how they were built for the Sugar Mill >>> but they did also convert some conventional steam locos to fireless.
    GH

    Question, why does a fireless engine have a dome?


    Similar reason to a conventional steam locomotive, to keep the steam outlet above the water level.

    A fireless loco isn't simply a pressure vessel containing only steam, it would run out rather quickly if that was the case. It actually contains a large amount of water (2/3 - 3/4 full IIRC) which releases more steam as
    the pressure reduces.


    Thanks, I should have thought of that. A-Level physics was a long time ago!

    --
    Graeme Wall
    The older I get, the better I was.


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)