• all quiet on the newsgroup front?

    From Catweazel@3:633/10 to All on Wednesday, October 21, 2026 16:09:12
    tumbleweed rolls past...

    --
    This email has been checked for viruses by Avast antivirus software. www.avast.com

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Brian Morrison@3:633/10 to All on Wednesday, October 21, 2026 19:48:51
    On Wed, 21 Oct 2026 16:09:12 +0100
    Catweazel <francis.fuller@iee.org> wrote:

    tumbleweed rolls past...


    Yes, it does that if no one says anything.

    Have been busily working on testing FreeDV GUI improvements while the
    upcoming RADEV2 is having last minute kinks worked out.

    Anyone else doing radio stuff?

    --

    Brian Morrison "No, his mind is not for rent
    To any god or government
    Always hopeful, but discontent
    He knows changes aren't permanent
    But change is"


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From mm0fmf@3:633/10 to All on Wednesday, October 21, 2026 21:21:33
    On 21/10/2026 19:48, Brian Morrison wrote:
    Anyone else doing radio stuff?

    Bringing an 80's vintage 23cm transverter back to life.



    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Brian Morrison@3:633/10 to All on Wednesday, October 21, 2026 23:07:28
    On Wed, 21 Oct 2026 21:21:33 +0100
    mm0fmf <none@invalid.com> wrote:

    On 21/10/2026 19:48, Brian Morrison wrote:
    Anyone else doing radio stuff?

    Bringing an 80's vintage 23cm transverter back to life.

    What has happened to it? I would expect some of the power supply
    decoupling and reservoir caps could have dried out, but with a bit of
    careful application of low voltages you should be able to deal with
    that sort of thing. Semiconductors usually survive without much
    trouble, it's the stuff that degrades, like the rubber used to increase
    the friction in tunable inductors that crumbles to dust or turns into
    a sticky goo. Old Pye and Philips stuff was fairly bad for that. And
    mechanical filters.

    --

    Brian Morrison "No, his mind is not for rent
    To any god or government
    Always hopeful, but discontent
    He knows changes aren't permanent
    But change is"


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From mm0fmf@3:633/10 to All on Thursday, October 22, 2026 10:30:06
    On 21/10/2026 23:07, Brian Morrison wrote:
    On Wed, 21 Oct 2026 21:21:33 +0100
    mm0fmf <none@invalid.com> wrote:

    On 21/10/2026 19:48, Brian Morrison wrote:
    Anyone else doing radio stuff?

    Bringing an 80's vintage 23cm transverter back to life.

    What has happened to it? I would expect some of the power supply
    decoupling and reservoir caps could have dried out, but with a bit of
    careful application of low voltages you should be able to deal with
    that sort of thing. Semiconductors usually survive without much
    trouble, it's the stuff that degrades, like the rubber used to increase
    the friction in tunable inductors that crumbles to dust or turns into
    a sticky goo. Old Pye and Philips stuff was fairly bad for that. And mechanical filters.


    It was never completed. Project from SK estate... working LO/RX unit and
    TX unit but there was no interface electronics to handle relay switching
    and power switching to the TX unit. No relays either. It took a while to source all the bits but project working has sped up as I no longer work!



    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Brian Morrison@3:633/10 to All on Friday, October 23, 2026 13:02:41
    On Thu, 22 Oct 2026 10:30:06 +0100
    mm0fmf <none@invalid.com> wrote:

    On 21/10/2026 23:07, Brian Morrison wrote:
    On Wed, 21 Oct 2026 21:21:33 +0100
    mm0fmf <none@invalid.com> wrote:

    On 21/10/2026 19:48, Brian Morrison wrote:
    [...]

    Bringing an 80's vintage 23cm transverter back to life.

    What has happened to it? I would expect some of the power supply
    decoupling and reservoir caps could have dried out, but with a bit
    of careful application of low voltages you should be able to deal
    with that sort of thing. Semiconductors usually survive without much trouble, it's the stuff that degrades, like the rubber used to
    increase the friction in tunable inductors that crumbles to dust or
    turns into a sticky goo. Old Pye and Philips stuff was fairly bad
    for that. And mechanical filters.


    It was never completed. Project from SK estate... working LO/RX unit
    and TX unit but there was no interface electronics to handle relay
    switching and power switching to the TX unit. No relays either. It
    took a while to source all the bits but project working has sped up
    as I no longer work!

    Sounds fun. Despite starting my professional career (that's the "heads
    downhill under little control" meaning) in microwaves at various
    frequencies as high as 110GHz I never got into doing anything at such frequencies as an amateur. Probably a bit late now after not far short
    of 50 years licensed.

    --

    Brian Morrison "No, his mind is not for rent
    To any god or government
    Always hopeful, but discontent
    He knows changes aren't permanent
    But change is"


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)