I posted this somewhere on youtube this explains my problem......

I cannot get the see through side panel on I have been building pc's for 30 years if it was a ?30 case it would just slide into place I have spent
hours on this can anyone help me what the hell am I doing wrong. Is it like normal cases where you start by offsetting it an inch or 2 away from the
back of the case then slide into place because that is what I am tryng,
there isn't even anything to support the bottom of the panel, there would usually be a groove you could hold it still on then press it in slightly and slide but no matter what I try it just doesn't work I am at my wits end I didn't pay ?160 for this hassle!!!! Disgraceful Corsair absolutely disgraceful!

Anyone give me any pointers lol


--- PyGate Linux v1.5.1
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)

On 27/11/2025 15:51, Ginchy wrote:

I posted this somewhere on youtube this explains my problem......

I cannot get the see through side panel on I have been building pc's for
30 years if it was a œ30 case it wouldÿ just slide into place I have
spent hours on this can anyone help me what the hell am I doing wrong.
Is it like normal cases where you start by offsetting it an inch or 2
away from the back of the case then slide into place because that is
what I am tryng, there isn't even anything to support the bottom of the panel, there would usually be a groove you could hold it still on then
press it in slightly and slide but no matter what I try it just doesn't
work I am at my wits end I didn't pay œ160 for this hassle!!!!
Disgraceful Corsair absolutely disgraceful!

Anyone give me any pointers lol

manual?

https://assets.corsair.com/image/upload/corsairmedia/sys_master/productcontent/OBSIDIAN_750D_InstallGuide_revAB_Web.pdf

--
Adrian C

--- PyGate Linux v1.5.1
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)

"Adrian Caspersz" wrote in message news:morqbrF62haU1@mid.individual.net...

On 27/11/2025 15:51, Ginchy wrote:

I posted this somewhere on youtube this explains my problem......

I cannot get the see through side panel on I have been building pc's for
30 years if it was a œ30 case it would just slide into place I have spent hours on this can anyone help me what the hell am I doing wrong. Is it
like normal cases where you start by offsetting it an inch or 2 away from the back of the case then slide into place because that is what I am
tryng, there isn't even anything to support the bottom of the panel, there would usually be a groove you could hold it still on then press it in slightly and slide but no matter what I try it just doesn't work I am at
my wits end I didn't pay œ160 for this hassle!!!! Disgraceful Corsair absolutely disgraceful!

Anyone give me any pointers lol

manual?

https://assets.corsair.com/image/upload/corsairmedia/sys_master/productcontent/OBSIDIAN_750D_InstallGuide_revAB_Web.pdf

--
Adrian C


--


No use that just tells you what I already know from all my previous builds
in the past 25 years but it does not go the way they make it sound. I was a long long time talking to Corsair AI to get the real instructions and you don't slide it anywhere you align it with a little bar on the inside of the panel its almost micro millimetre positioning then it sits there and waits
for the thumbscrews!

I hate this case you ought to see the sheer hassle to get a peripheral card like a soundcard or vga card screw into it there is no room for your fingers to get a start on the thread at all it s fkn nightmare its also cheap cheap cheap plastic which you pay a luxury price for!!!

Lol

Never ever again!

Thanks anyway! I see no one else seems to have that case I must be the only mug that bought one!


--- PyGate Linux v1.5.1
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)