• FFC cable connector for Sony CDP-C435, broken?

    From David Farber@3:633/10 to All on Tuesday, August 11, 2026 20:30:52
    I was in the process of reassembling a Sony CDP-C435 5 disc changer
    which had intermittent problems. Sometimes the carousel would just keep spinning. Sometimes the door itself would jam. In any case, it seemed I
    had sorted out all those problems and then I decided to remove the main
    pc board to check for cold solder joints or aging capacitors. Everything
    in that respect checked out OK. When it came to the point of
    reinstalling the main board, I noticed there was a problem with the
    connector on the main board where the FFC attaches to it from the CD
    transport assembly. These photos tell the story:

    https://app.box.com/s/z46qyiz01lrew11cpy4d52mx0wrom564 https://app.box.com/s/xg9yo0tj4ztra87xczwdgl517k7db64i

    Does this connector have some sort of movable latch to hold the cable in place? As it stands now, there is no slot to insert the cable and I
    can't find any extra pieces on my bench that could presumably be the
    missing piece. Either that, or there isn't anything missing and I just
    can't figure out how to reattach the cable.

    Thanks for your reply
    --
    David Farber
    Los Osos, CA

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From David Farber@3:633/10 to All on Friday, August 14, 2026 15:46:55
    On 8/11/2026 8:30 PM, David Farber wrote:
    I was in the process of reassembling a Sony CDP-C435 5 disc changer
    which had intermittent problems. Sometimes the carousel would just keep spinning. Sometimes the door itself would jam. In any case, it seemed I
    had sorted out all those problems and then I decided to remove the main
    pc board to check for cold solder joints or aging capacitors. Everything
    in that respect checked out OK. When it came to the point of
    reinstalling the main board, I noticed there was a problem with the connector on the main board where the FFC attaches to it from the CD transport assembly. These photos tell the story:

    https://app.box.com/s/z46qyiz01lrew11cpy4d52mx0wrom564 https://app.box.com/s/xg9yo0tj4ztra87xczwdgl517k7db64i

    Does this connector have some sort of movable latch to hold the cable in place? As it stands now, there is no slot to insert the cable and I
    can't find any extra pieces on my bench that could presumably be the
    missing piece. Either that, or there isn't anything missing and I just
    can't figure out how to reattach the cable.

    Thanks for your reply
    --
    David Farber
    Los Osos, CA

    I had run out of ideas until I watched a video of a tech working on a
    similar Sony 5 CD changer. I noticed as the camera panned by the main
    board that the FFC connector looked EXACTLY like the one I'm fixing.
    That confirmed that the connector wasn't broken. After giving up looking
    with my magnifying glass at the top of the connector (CN401) I turned
    the pc board upside down, foil side up, and saw there was a very small
    amount of overhang at the edge of the board where you could see the slot
    where the FFC could be inserted. I had never seen any connector like
    this before. I made a white line marking on the photo showing where the
    FFC could be inserted.

    https://app.box.com/s/9iljudkt7ekxxqmf94um9p5j9pi3jfuo
    --
    David Farber
    Los Osos, CA

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)