• 60 layer boards?

    From john larkin@3:633/10 to All on Friday, November 20, 2026 15:08:49

    https://www.theregister.com/systems/2026/11/20/ai-boom-threatens-circuit-board-crunch-to-rival-pandemic-era-chip-shortage/5311335


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Bill Sloman@3:633/10 to All on Saturday, November 21, 2026 15:28:31
    On 21/11/2026 10:08 am, john larkin wrote:

    https://www.theregister.com/systems/2026/11/20/ai-boom-threatens-circuit-board-crunch-to-rival-pandemic-era-chip-shortage/5311335

    It looks like ignorant alarmism. Multilayer boards tend to have a
    standard thickness, so they don't use up more resin, glass fibre or
    copper in their more numerous but thinner layers.

    My guess is that the 60 layer board are in the printed transformer
    windings in the power supplies that down-convert the high voltages
    supplied to the racks to the higher currents (at around a volt) supplied
    to the chips on the boards. Printed windings are odd sorts of printed
    circuit boards, and they are less likely to have a standard thickness.

    Lots of data centres are going to need lots of printed circuit boards,
    and that is going to create a supply crunch, but I suspect that boards themselves are going to be pretty ordinary.

    --
    Bill Sloman, sydney

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From John R Walliker@3:633/10 to All on Saturday, November 21, 2026 09:28:59
    On 21/11/2026 04:28, Bill Sloman wrote:
    On 21/11/2026 10:08 am, john larkin wrote:

    https://www.theregister.com/systems/2026/11/20/ai-boom-threatens-
    circuit-board-crunch-to-rival-pandemic-era-chip-shortage/5311335

    It looks like ignorant alarmism. Multilayer boards tend to have a
    standard thickness, so they don't use up more resin, glass fibre or
    copper in their more numerous but thinner layers.

    My guess is that the 60 layer board are in the printed transformer
    windings in the power supplies that down-convert the high voltages
    supplied to the racks to the higher currents (at around a volt) supplied
    to the chips on the boards. Printed windings are odd sorts of printed circuit boards, and they are less likely to have a standard thickness.

    Lots of data centres are going to need lots of printed circuit boards,
    and that is going to create a supply crunch, but I suspect that boards themselves are going to be pretty ordinary.


    The problem does appear to be real. Prices have increased and there
    are long lead times even on 8-layer boards.
    Apparently there are only a few looms worldwide that can make the
    glass cloth and they are at full capacity.
    The problem is worst for the better quality grades intended for
    high-frequency use.
    John


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From john larkin@3:633/10 to All on Saturday, November 21, 2026 07:12:43
    On Sat, 21 Nov 2026 09:28:59 +0000, John R Walliker
    <jrwalliker@gmail.com> wrote:

    On 21/11/2026 04:28, Bill Sloman wrote:
    On 21/11/2026 10:08 am, john larkin wrote:

    https://www.theregister.com/systems/2026/11/20/ai-boom-threatens-
    circuit-board-crunch-to-rival-pandemic-era-chip-shortage/5311335

    It looks like ignorant alarmism. Multilayer boards tend to have a
    standard thickness, so they don't use up more resin, glass fibre or
    copper in their more numerous but thinner layers.

    My guess is that the 60 layer board are in the printed transformer
    windings in the power supplies that down-convert the high voltages
    supplied to the racks to the higher currents (at around a volt) supplied
    to the chips on the boards. Printed windings are odd sorts of printed
    circuit boards, and they are less likely to have a standard thickness.

    Lots of data centres are going to need lots of printed circuit boards,
    and that is going to create a supply crunch, but I suspect that boards
    themselves are going to be pretty ordinary.


    The problem does appear to be real. Prices have increased and there
    are long lead times even on 8-layer boards.
    Apparently there are only a few looms worldwide that can make the
    glass cloth and they are at full capacity.
    The problem is worst for the better quality grades intended for >high-frequency use.
    John

    Imagine trying to do impedance control on a 60-layer board.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Phil Hobbs@3:633/10 to All on Saturday, November 21, 2026 16:20:08
    john larkin <jl@glen--canyon.com> wrote:
    On Sat, 21 Nov 2026 09:28:59 +0000, John R Walliker
    <jrwalliker@gmail.com> wrote:

    On 21/11/2026 04:28, Bill Sloman wrote:
    On 21/11/2026 10:08 am, john larkin wrote:

    https://www.theregister.com/systems/2026/11/20/ai-boom-threatens-
    circuit-board-crunch-to-rival-pandemic-era-chip-shortage/5311335

    It looks like ignorant alarmism. Multilayer boards tend to have a
    standard thickness, so they don't use up more resin, glass fibre or
    copper in their more numerous but thinner layers.

    My guess is that the 60 layer board are in the printed transformer
    windings in the power supplies that down-convert the high voltages
    supplied to the racks to the higher currents (at around a volt) supplied >>> to the chips on the boards. Printed windings are odd sorts of printed
    circuit boards, and they are less likely to have a standard thickness.

    Lots of data centres are going to need lots of printed circuit boards,
    and that is going to create a supply crunch, but I suspect that boards
    themselves are going to be pretty ordinary.


    The problem does appear to be real. Prices have increased and there
    are long lead times even on 8-layer boards.
    Apparently there are only a few looms worldwide that can make the
    glass cloth and they are at full capacity.
    The problem is worst for the better quality grades intended for
    high-frequency use.
    John

    Imagine trying to do impedance control on a 60-layer board.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics


    At IBM we were shipping 100-layer ceramic TCMs mounted to 24ish layer Clark boards back in the early 80s. All controlled impedance and all ECL except
    the main memory.

    Cheers

    Phil Hobbs

    --
    Dr Philip C D Hobbs Principal Consultant ElectroOptical Innovations LLC / Hobbs ElectroOptics Optics, Electro-optics, Photonics, Analog Electronics

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From john larkin@3:633/10 to All on Saturday, November 21, 2026 09:50:34
    On Sat, 21 Nov 2026 16:20:08 -0000 (UTC), Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> wrote:

    john larkin <jl@glen--canyon.com> wrote:
    On Sat, 21 Nov 2026 09:28:59 +0000, John R Walliker
    <jrwalliker@gmail.com> wrote:

    On 21/11/2026 04:28, Bill Sloman wrote:
    On 21/11/2026 10:08 am, john larkin wrote:

    https://www.theregister.com/systems/2026/11/20/ai-boom-threatens-
    circuit-board-crunch-to-rival-pandemic-era-chip-shortage/5311335

    It looks like ignorant alarmism. Multilayer boards tend to have a
    standard thickness, so they don't use up more resin, glass fibre or
    copper in their more numerous but thinner layers.

    My guess is that the 60 layer board are in the printed transformer
    windings in the power supplies that down-convert the high voltages
    supplied to the racks to the higher currents (at around a volt) supplied >>>> to the chips on the boards. Printed windings are odd sorts of printed >>>> circuit boards, and they are less likely to have a standard thickness. >>>>
    Lots of data centres are going to need lots of printed circuit boards, >>>> and that is going to create a supply crunch, but I suspect that boards >>>> themselves are going to be pretty ordinary.


    The problem does appear to be real. Prices have increased and there
    are long lead times even on 8-layer boards.
    Apparently there are only a few looms worldwide that can make the
    glass cloth and they are at full capacity.
    The problem is worst for the better quality grades intended for
    high-frequency use.
    John

    Imagine trying to do impedance control on a 60-layer board.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics


    At IBM we were shipping 100-layer ceramic TCMs mounted to 24ish layer Clark >boards back in the early 80s. All controlled impedance and all ECL except >the main memory.

    Cheers

    Phil Hobbs

    A 60-layer PCB might be 300 mils thick, 5 mil average layer spacing,
    maybe 4 mil dielectrics. Really skinny traces might have managible
    impedances.

    Keep them short. Maybe just some layers could support the longer runs,
    with non-uniform dielectric stackups.

    Saturn refuses to consider it at all.

    We've done 12 layers, nasty enough. I'm mostly doing 4 and 6 lately.

    Semi-AI layout woud be cool. We'd do the important place and route and
    let it grunt out the rest.







    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Bill Sloman@3:633/10 to All on Sunday, November 22, 2026 15:17:16
    On 22/11/2026 2:12 am, john larkin wrote:
    On Sat, 21 Nov 2026 09:28:59 +0000, John R Walliker
    <jrwalliker@gmail.com> wrote:

    On 21/11/2026 04:28, Bill Sloman wrote:
    On 21/11/2026 10:08 am, john larkin wrote:

    https://www.theregister.com/systems/2026/11/20/ai-boom-threatens-
    circuit-board-crunch-to-rival-pandemic-era-chip-shortage/5311335

    It looks like ignorant alarmism. Multilayer boards tend to have a
    standard thickness, so they don't use up more resin, glass fibre or
    copper in their more numerous but thinner layers.

    My guess is that the 60 layer board are in the printed transformer
    windings in the power supplies that down-convert the high voltages
    supplied to the racks to the higher currents (at around a volt) supplied >>> to the chips on the boards. Printed windings are odd sorts of printed
    circuit boards, and they are less likely to have a standard thickness.

    Lots of data centres are going to need lots of printed circuit boards,
    and that is going to create a supply crunch, but I suspect that boards
    themselves are going to be pretty ordinary.


    The problem does appear to be real. Prices have increased and there
    are long lead times even on 8-layer boards.
    Apparently there are only a few looms worldwide that can make the
    glass cloth and they are at full capacity.
    The problem is worst for the better quality grades intended for
    high-frequency use.
    John

    Imagine trying to do impedance control on a 60-layer board.

    If every other layer was a ground or power plane it would be dead easy.

    That was the real appeal of multi-layer boards when they first became practical. Lots of boards that had needed a screen plate as two layer
    boards didn't need it when they became four or six layer.

    --
    Bill Sloman, Sydney


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Bill Sloman@3:633/10 to All on Sunday, November 22, 2026 17:08:36
    On 22/11/2026 4:50 am, john larkin wrote:
    On Sat, 21 Nov 2026 16:20:08 -0000 (UTC), Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> wrote:

    john larkin <jl@glen--canyon.com> wrote:
    On Sat, 21 Nov 2026 09:28:59 +0000, John R Walliker
    <jrwalliker@gmail.com> wrote:

    On 21/11/2026 04:28, Bill Sloman wrote:
    On 21/11/2026 10:08 am, john larkin wrote:

    https://www.theregister.com/systems/2026/11/20/ai-boom-threatens-
    circuit-board-crunch-to-rival-pandemic-era-chip-shortage/5311335

    It looks like ignorant alarmism. Multilayer boards tend to have a
    standard thickness, so they don't use up more resin, glass fibre or
    copper in their more numerous but thinner layers.

    My guess is that the 60 layer board are in the printed transformer
    windings in the power supplies that down-convert the high voltages
    supplied to the racks to the higher currents (at around a volt) supplied >>>>> to the chips on the boards. Printed windings are odd sorts of printed >>>>> circuit boards, and they are less likely to have a standard thickness. >>>>>
    Lots of data centres are going to need lots of printed circuit boards, >>>>> and that is going to create a supply crunch, but I suspect that boards >>>>> themselves are going to be pretty ordinary.


    The problem does appear to be real. Prices have increased and there
    are long lead times even on 8-layer boards.
    Apparently there are only a few looms worldwide that can make the
    glass cloth and they are at full capacity.
    The problem is worst for the better quality grades intended for
    high-frequency use.
    John

    Imagine trying to do impedance control on a 60-layer board.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics


    At IBM we were shipping 100-layer ceramic TCMs mounted to 24ish layer Clark >> boards back in the early 80s. All controlled impedance and all ECL except >> the main memory.

    Cheers

    Phil Hobbs

    A 60-layer PCB might be 300 mils thick, 5 mil average layer spacing,
    maybe 4 mil dielectrics. Really skinny traces might have managible impedances.

    Keep them short. Maybe just some layers could support the longer runs,
    with non-uniform dielectric stackups.

    Saturn refuses to consider it at all.

    We've done 12 layers, nasty enough. I'm mostly doing 4 and 6 lately.

    Semi-AI layout woud be cool. We'd do the important place and route and
    let it grunt out the rest.

    The printed circuit layout draftsmen worked that way at Cambridge
    Instruments around 1990. The layout programs they used weren't all that user-friendly, but they did seem to be powerful.

    --
    Bill Sloman, Sydney


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)