and why the entire company, not just Azure and stuff, should've been long shot dead to put it out of its misery.MS has never been a "tech powerhouse". Their skill has been in cornering
https://isolveproblems.substack.com/p/how-microsoft-vaporized-a-trillion
Higly recommended reading. Long, in 6 parts, but very informative.
And clearly telling that this massive failure is not just a bad accident. It is just a beginning of the fall of the empire.
There is NOTHING that could be done to fix it and cure the dying giant. It
is terminal and uncurable. The giant is doomed.
and why the entire company, not just Azure and stuff, should've been long >shot dead to put it out of its misery.
https://isolveproblems.substack.com/p/how-microsoft-vaporized-a-trillion
Higly recommended reading. Long, in 6 parts, but very informative.
And clearly telling that this massive failure is not just a bad accident. It >is just a beginning of the fall of the empire.
There is NOTHING that could be done to fix it and cure the dying giant. It
is terminal and uncurable. The giant is doomed.
---
******************************************************************
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. * >******************************************************************
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
and why the entire company, not just Azure and stuff, should've been long
shot dead to put it out of its misery.
https://isolveproblems.substack.com/p/how-microsoft-vaporized-a-trillion
Higly recommended reading. Long, in 6 parts, but very informative.
And clearly telling that this massive failure is not just a bad accident. It >> is just a beginning of the fall of the empire.
There is NOTHING that could be done to fix it and cure the dying giant. It >> is terminal and uncurable. The giant is doomed.
---
******************************************************************
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
******************************************************************
Nightmare. It's probably not fixable.
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
and why the entire company, not just Azure and stuff, should've been long >>> shot dead to put it out of its misery.
https://isolveproblems.substack.com/p/how-microsoft-vaporized-a-trillion >>>
Higly recommended reading. Long, in 6 parts, but very informative.
And clearly telling that this massive failure is not just a bad accident. It
is just a beginning of the fall of the empire.
There is NOTHING that could be done to fix it and cure the dying giant. It >>> is terminal and uncurable. The giant is doomed.
---
******************************************************************
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
******************************************************************
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >difficult. The US hasn't got as big a talent pool as China to dredge for >people who might be able to fix the problems, and while both countries
are educating most of the rising generation, rich and powerful parents
in both countries have ways of ensuring that their kids get the best of
the opportunities around.
Finland - in theory - does better, but my wife found that their graduate >students weren't great at presenting new ideas - taking teachers too >seriously can be as much of problem as not taking them seriously enough.
and why the entire company, not just Azure and stuff, should've been long >shot dead to put it out of its misery.
https://isolveproblems.substack.com/p/how-microsoft-vaporized-a-trillion
Higly recommended reading. Long, in 6 parts, but very informative.
And clearly telling that this massive failure is not just a bad accident. It >is just a beginning of the fall of the empire.
There is NOTHING that could be done to fix it and cure the dying giant. It
is terminal and uncurable. The giant is doomed.
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
and why the entire company, not just Azure and stuff, should've been long
shot dead to put it out of its misery.
https://isolveproblems.substack.com/p/how-microsoft-vaporized-a-trillion
Higly recommended reading. Long, in 6 parts, but very informative.
And clearly telling that this massive failure is not just a bad accident. It >> is just a beginning of the fall of the empire.
There is NOTHING that could be done to fix it and cure the dying giant. It >> is terminal and uncurable. The giant is doomed.
Question arises - why did the author stick around?
After two weeks, he should have been hitting the road,
looking forsomething that wouldn'twaste his time.
I avoid this by researching and reviewing immediateSome clients can be educated and their path altered to
project goals andresource asignments, before signing on.
This is offered as a free design review under an NDA . . .
If there are serious issues, the time isn't wasted.
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more
difficult. The US hasn't got as big a talent pool as China to dredge for
people who might be able to fix the problems, and while both countries
are educating most of the rising generation, rich and powerful parents
in both countries have ways of ensuring that their kids get the best of
the opportunities around.
Finland - in theory - does better, but my wife found that their graduate
students weren't great at presenting new ideas - taking teachers too
seriously can be as much of problem as not taking them seriously enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU.
Times haven't changed much since I was an undergrad: listen to the
lectures, memorize the formulas, execute the formulas.
And somehow, after four years of that, they dress up in silly caps and
gowns [1] and get a piece of paper that magically makes them able to
think.
I estimate that about 2% of the CE/EE grads understand electricity and
have a chance of eventually designing electronics, or at least
assisting.
[1] I skipped my ceremony. Who wants to stand for hours in the New
Orleans heat and humidity, in the sun, in a rented black robe,
listening to boring speeches?
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more
difficult. The US hasn't got as big a talent pool as China to dredge for >>> people who might be able to fix the problems, and while both countries
are educating most of the rising generation, rich and powerful parents
in both countries have ways of ensuring that their kids get the best of
the opportunities around.
Finland - in theory - does better, but my wife found that their graduate >>> students weren't great at presenting new ideas - taking teachers too
seriously can be as much of problem as not taking them seriously enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU.
Times haven't changed much since I was an undergrad: listen to the
lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the
dross and get the good stuff up to date.
It does require the kind of active participation that would have been
beyond you.
And somehow, after four years of that, they dress up in silly caps and
gowns [1] and get a piece of paper that magically makes them able to
think.
The university of Melbourne let me graduate in absentia as an M.Sc, if I >rent the Ph.D. gown and sat on the podium for the Ph.D. graduation
ceremony, which my parents enjoyed watching. My father showed up with
black and white film in his camera so the scarlet Ph.D. robe didn't get >recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does have >legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and
have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that
they can communicate at the dumbed-down level that you can handle.
Thinking about electronics in a productive way can take place in a
variety of way. Education is more about letting you find ways of >communicating those various sorts of insight. You can do electronics,
but you can't talk about it all that well, which is where your 2%
probably comes from.
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
I'm sponsoring three senior capstone projects, at CalPoly and SFSU.Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more
difficult. The US hasn't got as big a talent pool as China to dredge for >>>> people who might be able to fix the problems, and while both countries >>>> are educating most of the rising generation, rich and powerful parents >>>> in both countries have ways of ensuring that their kids get the best of >>>> the opportunities around.
Finland - in theory - does better, but my wife found that their graduate >>>> students weren't great at presenting new ideas - taking teachers too
seriously can be as much of problem as not taking them seriously enough. >>>
Times haven't changed much since I was an undergrad: listen to the
lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the
dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students
can. That's obviously absurd.
It does require the kind of active participation that would have been
beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH
ships, pipeline supervisory controls, modems, flight hardware for the
C5A.
How about you?
And somehow, after four years of that, they dress up in silly caps and
gowns [1] and get a piece of paper that magically makes them able to
think.
The university of Melbourne let me graduate in absentia as an M.Sc, if I
rent the Ph.D. gown and sat on the podium for the Ph.D. graduation
ceremony, which my parents enjoyed watching. My father showed up with
black and white film in his camera so the scarlet Ph.D. robe didn't get
recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does have
legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and
have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that
they can communicate at the dumbed-down level that you can handle.
I think that three or four of the various capstone team members may be keepers. Two seem to be geniuses. Student projects are a great way to
do, basically, extended interviews.
Thinking about electronics in a productive way can take place in a
variety of way. Education is more about letting you find ways of
communicating those various sorts of insight. You can do electronics,
but you can't talk about it all that well, which is where your 2%
probably comes from.
There's an interesting technical issue with one current project. It
involves executing, basically, a Spice simulation in an FPGA in real
time. Solving that, making it actually work before May, will be
educational for everyone involved.
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org> >>>> wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more
difficult. The US hasn't got as big a talent pool as China to
dredge for
people who might be able to fix the problems, and while both countries >>>>> are educating most of the rising generation, rich and powerful parents >>>>> in both countries have ways of ensuring that their kids get the
best of
the opportunities around.
Finland - in theory - does better, but my wife found that their
graduate
students weren't great at presenting new ideas - taking teachers too >>>>> seriously can be as much of problem as not taking them seriously
enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU.
Times haven't changed much since I was an undergrad: listen to the
lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the
dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students
can. That's obviously absurd.
It does require the kind of active participation that would have been
beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH
ships, pipeline supervisory controls, modems, flight hardware for the
C5A.
How about you?
And somehow, after four years of that, they dress up in silly caps and >>>> gowns [1] and get a piece of paper that magically makes them able to
think.
The university of Melbourne let me graduate in absentia as an M.Sc, if I >>> rent the Ph.D. gown and sat on the podium for the Ph.D. graduation
ceremony, which my parents enjoyed watching. My father showed up with
black and white film in his camera so the scarlet Ph.D. robe didn't get
recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does have >>> legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and >>>> have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that
they can communicate at the dumbed-down level that you can handle.
I think that three or four of the various capstone team members may be
keepers. Two seem to be geniuses. Student projects are a great way to
do, basically, extended interviews.
But if you are interviewing the candidatates to work how like John Larkin they are there's not a lot point in an extended intrerview.
Thinking about electronics in a productive way can take place in a
variety of way. Education is more about letting you find ways of
communicating those various sorts of insight. You can do electronics,
but you can't talk about it all that well, which is where your 2%
probably comes from.
There's an interesting technical issue with one current project. It
involves executing, basically, a Spice simulation in an FPGA in real
time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The kind
of simulation you'd run in an FPGA should be paralleled. Any FPGA can
run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just have
been difficult to explain to an unsophisticated audience.
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>> wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >>>>>> difficult. The US hasn't got as big a talent pool as China to
dredge for
people who might be able to fix the problems, and while both
countries
are educating most of the rising generation, rich and powerful
parents
in both countries have ways of ensuring that their kids get the
best of
the opportunities around.
Finland - in theory - does better, but my wife found that their
graduate
students weren't great at presenting new ideas - taking teachers too >>>>>> seriously can be as much of problem as not taking them seriously
enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU.
Times haven't changed much since I was an undergrad: listen to the
lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the
dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students
can. That's obviously absurd.
It does require the kind of active participation that would have been
beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH
ships, pipeline supervisory controls, modems, flight hardware for the
C5A.
How about you?
And somehow, after four years of that, they dress up in silly caps and >>>>> gowns [1] and get a piece of paper that magically makes them able to >>>>> think.
The university of Melbourne let me graduate in absentia as an M.Sc,
if I
rent the Ph.D. gown and sat on the podium for the Ph.D. graduation
ceremony, which my parents enjoyed watching. My father showed up with
black and white film in his camera so the scarlet Ph.D. robe didn't get >>>> recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does
have
legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and >>>>> have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that
they can communicate at the dumbed-down level that you can handle.
I think that three or four of the various capstone team members may be
keepers. Two seem to be geniuses. Student projects are a great way to
do, basically, extended interviews.
But if you are interviewing the candidatates to work how like John Larkin
they are there's not a lot point in an extended intrerview.
Thinking about electronics in a productive way can take place in a
variety of way. Education is more about letting you find ways of
communicating those various sorts of insight. You can do electronics,
but you can't talk about it all that well, which is where your 2%
probably comes from.
There's an interesting technical issue with one current project. It
involves executing, basically, a Spice simulation in an FPGA in real
time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The
kind of simulation you'd run in an FPGA should be paralleled. Any FPGA
can run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just have
been difficult to explain to an unsophisticated audience.
Au contraire! I think that translating a Spice circuit description
into FPGA code should work very well indeed. I haven't searched,
but the software to do so very likely already exists somewhere.
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>> wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >>>>>> difficult. The US hasn't got as big a talent pool as China to
dredge for
people who might be able to fix the problems, and while both countries >>>>>> are educating most of the rising generation, rich and powerful parents >>>>>> in both countries have ways of ensuring that their kids get the
best of
the opportunities around.
Finland - in theory - does better, but my wife found that their
graduate
students weren't great at presenting new ideas - taking teachers too >>>>>> seriously can be as much of problem as not taking them seriously
enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU.
Times haven't changed much since I was an undergrad: listen to the
lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the
dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students
can. That's obviously absurd.
It does require the kind of active participation that would have been
beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH
ships, pipeline supervisory controls, modems, flight hardware for the
C5A.
How about you?
And somehow, after four years of that, they dress up in silly caps and >>>>> gowns [1] and get a piece of paper that magically makes them able to >>>>> think.
The university of Melbourne let me graduate in absentia as an M.Sc, if I >>>> rent the Ph.D. gown and sat on the podium for the Ph.D. graduation
ceremony, which my parents enjoyed watching. My father showed up with
black and white film in his camera so the scarlet Ph.D. robe didn't get >>>> recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does have >>>> legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and >>>>> have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that
they can communicate at the dumbed-down level that you can handle.
I think that three or four of the various capstone team members may be
keepers. Two seem to be geniuses. Student projects are a great way to
do, basically, extended interviews.
But if you are interviewing the candidatates to work how like John Larkin
they are there's not a lot point in an extended intrerview.
Thinking about electronics in a productive way can take place in a
variety of way. Education is more about letting you find ways of
communicating those various sorts of insight. You can do electronics,
but you can't talk about it all that well, which is where your 2%
probably comes from.
There's an interesting technical issue with one current project. It
involves executing, basically, a Spice simulation in an FPGA in real
time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The kind
of simulation you'd run in an FPGA should be paralleled. Any FPGA can
run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just have
been difficult to explain to an unsophisticated audience.
Au contraire! I think that translating a Spice circuit description
into FPGA code should work very well indeed. I haven't searched,
but the software to do so very likely already exists somewhere.
Jeroen Belleman
On 17/11/2026 7:25 pm, Jeroen Belleman wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org> >>>> wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman
<bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >>>>>>> difficult. The US hasn't got as big a talent pool as China to
dredge for
people who might be able to fix the problems, and while both
countries
are educating most of the rising generation, rich and powerful
parents
in both countries have ways of ensuring that their kids get the >>>>>>> best of
the opportunities around.
Finland - in theory - does better, but my wife found that their >>>>>>> graduate
students weren't great at presenting new ideas - taking teachers too >>>>>>> seriously can be as much of problem as not taking them seriously >>>>>>> enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU. >>>>>>
Times haven't changed much since I was an undergrad: listen to the >>>>>> lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the >>>>> dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students >>>> can. That's obviously absurd.
It does require the kind of active participation that would have been >>>>> beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH
ships, pipeline supervisory controls, modems, flight hardware for the
C5A.
How about you?
And somehow, after four years of that, they dress up in silly caps >>>>>> and
gowns [1] and get a piece of paper that magically makes them able to >>>>>> think.
The university of Melbourne let me graduate in absentia as an M.Sc, >>>>> if I
rent the Ph.D. gown and sat on the podium for the Ph.D. graduation
ceremony, which my parents enjoyed watching. My father showed up with >>>>> black and white film in his camera so the scarlet Ph.D. robe didn't >>>>> get
recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does >>>>> have
legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity >>>>>> and
have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that >>>>> they can communicate at the dumbed-down level that you can handle.
I think that three or four of the various capstone team members may be >>>> keepers. Two seem to be geniuses. Student projects are a great way to
do, basically, extended interviews.
But if you are interviewing the candidatates to work how like John
Larkin
they are there's not a lot point in an extended intrerview.
Thinking about electronics in a productive way can take place in a
variety of way. Education is more about letting you find ways of
communicating those various sorts of insight. You can do electronics, >>>>> but you can't talk about it all that well, which is where your 2%
probably comes from.
There's an interesting technical issue with one current project. It
involves executing, basically, a Spice simulation in an FPGA in real
time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The
kind of simulation you'd run in an FPGA should be paralleled. Any
FPGA can run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just have
been difficult to explain to an unsophisticated audience.
Au contraire! I think that translating a Spice circuit description
into FPGA code should work very well indeed. I haven't searched,
but the software to do so very likely already exists somewhere.
It would probably work well, but it you went to the trouble of working
out what could be executed in parallel it could probably be run quite a
bit faster.
On 11/17/26 14:07, Bill Sloman wrote:
On 17/11/2026 7:25 pm, Jeroen Belleman wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>> wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman
<bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >>>>>>>> difficult. The US hasn't got as big a talent pool as China to >>>>>>>> dredge for
people who might be able to fix the problems, and while both
countries
are educating most of the rising generation, rich and powerful >>>>>>>> parents
in both countries have ways of ensuring that their kids get the >>>>>>>> best of
the opportunities around.
Finland - in theory - does better, but my wife found that their >>>>>>>> graduate
students weren't great at presenting new ideas - taking teachers >>>>>>>> too
seriously can be as much of problem as not taking them seriously >>>>>>>> enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU. >>>>>>>
Times haven't changed much since I was an undergrad: listen to the >>>>>>> lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the >>>>>> dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students >>>>> can. That's obviously absurd.
It does require the kind of active participation that would have been >>>>>> beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH >>>>> ships, pipeline supervisory controls, modems, flight hardware for the >>>>> C5A.
How about you?
And somehow, after four years of that, they dress up in silly
caps and
gowns [1] and get a piece of paper that magically makes them able to >>>>>>> think.
The university of Melbourne let me graduate in absentia as an
M.Sc, if I
rent the Ph.D. gown and sat on the podium for the Ph.D. graduation >>>>>> ceremony, which my parents enjoyed watching. My father showed up with >>>>>> black and white film in his camera so the scarlet Ph.D. robe
didn't get
recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It
does have
legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand
electricity and
have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that >>>>>> they can communicate at the dumbed-down level that you can handle.
I think that three or four of the various capstone team members may be >>>>> keepers. Two seem to be geniuses. Student projects are a great way to >>>>> do, basically, extended interviews.
But if you are interviewing the candidatates to work out how like John >>>> Larkin they are there's not a lot point in an extended interview.
Thinking about electronics in a productive way can take place in a >>>>>> variety of way. Education is more about letting you find ways of
communicating those various sorts of insight. You can do electronics, >>>>>> but you can't talk about it all that well, which is where your 2%
probably comes from.
There's an interesting technical issue with one current project. It
involves executing, basically, a Spice simulation in an FPGA in real >>>>> time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The
kind of simulation you'd run in an FPGA should be paralleled. Any
FPGA can run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just
have been difficult to explain to an unsophisticated audience.
Au contraire! I think that translating a Spice circuit description
into FPGA code should work very well indeed. I haven't searched,
but the software to do so very likely already exists somewhere.
It would probably work well, but it you went to the trouble of working
out what could be executed in parallel it could probably be run quite
a bit faster.
You're still thinking in terms of parallelizing a single-thread
sequential program. Forget that. Circuits quite naturally divide
up into parallel components and multiple nodes, and FPGAs are good
at running all that at the same time.
A circuit is basically a bunch of simultaneous differential
equations.
FPGAs can do that very well. I had this PLL that I
translated into a collection of discrete-time discrete-value
differential equations that got implemented in a Xilinx FPGA.
It worked very well. In fact, I had three per FPGA, all running
at once.
On Tue, 17 Nov 2026 09:25:33 +0100, Jeroen Belleman
<jeroen@nospam.please> wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org> >>>> wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>>> wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >>>>>>> difficult. The US hasn't got as big a talent pool as China to
dredge for
people who might be able to fix the problems, and while both countries >>>>>>> are educating most of the rising generation, rich and powerful parents >>>>>>> in both countries have ways of ensuring that their kids get the
best of
the opportunities around.
Finland - in theory - does better, but my wife found that their
graduate
students weren't great at presenting new ideas - taking teachers too >>>>>>> seriously can be as much of problem as not taking them seriously >>>>>>> enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU. >>>>>>
Times haven't changed much since I was an undergrad: listen to the >>>>>> lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the >>>>> dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students >>>> can. That's obviously absurd.
It does require the kind of active participation that would have been >>>>> beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH
ships, pipeline supervisory controls, modems, flight hardware for the
C5A.
How about you?
And somehow, after four years of that, they dress up in silly caps and >>>>>> gowns [1] and get a piece of paper that magically makes them able to >>>>>> think.
The university of Melbourne let me graduate in absentia as an M.Sc, if I >>>>> rent the Ph.D. gown and sat on the podium for the Ph.D. graduation
ceremony, which my parents enjoyed watching. My father showed up with >>>>> black and white film in his camera so the scarlet Ph.D. robe didn't get >>>>> recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does have >>>>> legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and >>>>>> have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that >>>>> they can communicate at the dumbed-down level that you can handle.
I think that three or four of the various capstone team members may be >>>> keepers. Two seem to be geniuses. Student projects are a great way to
do, basically, extended interviews.
But if you are interviewing the candidatates to work how like John Larkin >>> they are there's not a lot point in an extended intrerview.
Thinking about electronics in a productive way can take place in a
variety of way. Education is more about letting you find ways of
communicating those various sorts of insight. You can do electronics, >>>>> but you can't talk about it all that well, which is where your 2%
probably comes from.
There's an interesting technical issue with one current project. It
involves executing, basically, a Spice simulation in an FPGA in real
time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The kind >>> of simulation you'd run in an FPGA should be paralleled. Any FPGA can
run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just have
been difficult to explain to an unsophisticated audience.
Au contraire! I think that translating a Spice circuit description
into FPGA code should work very well indeed. I haven't searched,
but the software to do so very likely already exists somewhere.
LT Spice is a compiler that maps the schematic to x86 machine code,
but that's still a procedural language that executes sequentially. It
has to do all sorts of math tricks to be stable at, equivalently, low
compute clock rates.
An FPGA can run massively parallel, a computation every clock for
every node in the circuit. That wouldn't need the fancy convergence
tricks.
I have Spice sims that run PPMs of real time, sometimes nanoseconds or
even picoseconds per second... erratically That can be really
annoying. An FPGA sim would flip that over and run thousands of times
faster than real time.
LT Spice allows one to set a maximum time step, but not a minimum,
much less a fixed one.
I've proposed using a DDS, or at least an NCO, to program the
execution rate in our FPGA sims.
On 18/11/2026 2:43 am, john larkin wrote:
On Tue, 17 Nov 2026 09:25:33 +0100, Jeroen Belleman
<jeroen@nospam.please> wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>> wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>>>> wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >>>>>>>> difficult. The US hasn't got as big a talent pool as China to
dredge for
people who might be able to fix the problems, and while both countries >>>>>>>> are educating most of the rising generation, rich and powerful parents >>>>>>>> in both countries have ways of ensuring that their kids get the >>>>>>>> best of
the opportunities around.
Finland - in theory - does better, but my wife found that their >>>>>>>> graduate
students weren't great at presenting new ideas - taking teachers too >>>>>>>> seriously can be as much of problem as not taking them seriously >>>>>>>> enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU. >>>>>>>
Times haven't changed much since I was an undergrad: listen to the >>>>>>> lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the >>>>>> dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students >>>>> can. That's obviously absurd.
It does require the kind of active participation that would have been >>>>>> beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH >>>>> ships, pipeline supervisory controls, modems, flight hardware for the >>>>> C5A.
How about you?
And somehow, after four years of that, they dress up in silly caps and >>>>>>> gowns [1] and get a piece of paper that magically makes them able to >>>>>>> think.
The university of Melbourne let me graduate in absentia as an M.Sc, if I >>>>>> rent the Ph.D. gown and sat on the podium for the Ph.D. graduation >>>>>> ceremony, which my parents enjoyed watching. My father showed up with >>>>>> black and white film in his camera so the scarlet Ph.D. robe didn't get >>>>>> recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does have >>>>>> legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and >>>>>>> have a chance of eventually designing electronics, or at least
assisting.
2% of them may had have their perceptions crippled to the point that >>>>>> they can communicate at the dumbed-down level that you can handle.
I think that three or four of the various capstone team members may be >>>>> keepers. Two seem to be geniuses. Student projects are a great way to >>>>> do, basically, extended interviews.
But if you are interviewing the candidatates to work how like John Larkin >>>> they are there's not a lot point in an extended intrerview.
Thinking about electronics in a productive way can take place in a >>>>>> variety of way. Education is more about letting you find ways of
communicating those various sorts of insight. You can do electronics, >>>>>> but you can't talk about it all that well, which is where your 2%
probably comes from.
There's an interesting technical issue with one current project. It
involves executing, basically, a Spice simulation in an FPGA in real >>>>> time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The kind >>>> of simulation you'd run in an FPGA should be paralleled. Any FPGA can
run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just have
been difficult to explain to an unsophisticated audience.
Au contraire! I think that translating a Spice circuit description
into FPGA code should work very well indeed. I haven't searched,
but the software to do so very likely already exists somewhere.
LT Spice is a compiler that maps the schematic to x86 machine code,
but that's still a procedural language that executes sequentially. It
has to do all sorts of math tricks to be stable at, equivalently, low
compute clock rates.
An FPGA can run massively parallel, a computation every clock for
every node in the circuit. That wouldn't need the fancy convergence
tricks.
The crucial point is that Spice is a finite difference implementation of >numerical integration. The "fancy convergence" tricks just get around
the fact that numerical integration is unstable if the step size gets
too big.
The instability isn't in the sequential operation, but rather in the
finite differences (which can be too big to allow stable numerical >integration for short time constant differential equations).
I have Spice sims that run PPMs of real time, sometimes nanoseconds or
even picoseconds per second... erratically That can be really
annoying. An FPGA sim would flip that over and run thousands of times
faster than real time.
It wouldn't. The instability is a feature of the finite difference
approach, not the sequential operation.
LT Spice allows one to set a maximum time step, but not a minimum,
much less a fixed one.
"Numerical integration is unstable if the step size gets too big."
I've proposed using a DDS, or at least an NCO, to program the
execution rate in our FPGA sims.
If you want to control the timing of the signals that come out of your
sim, that is essential. An NCO ought to be infinitely flexible up to it >maximum clock rate, but it is harder to get a precisely defined clock
rate out of it.
Right. And a procedural program runs slow, crunching one node at a
time, so step size has to be big or it runs all afternoon.
On Wed, 18 Nov 2026 15:08:26 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 18/11/2026 2:43 am, john larkin wrote:
On Tue, 17 Nov 2026 09:25:33 +0100, Jeroen Belleman
<jeroen@nospam.please> wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>>> wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>>>>> wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn
<ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >>>>>>>>> difficult. The US hasn't got as big a talent pool as China to >>>>>>>>> dredge for
people who might be able to fix the problems, and while both countries
are educating most of the rising generation, rich and powerful parents
in both countries have ways of ensuring that their kids get the >>>>>>>>> best of
the opportunities around.
Finland - in theory - does better, but my wife found that their >>>>>>>>> graduate
students weren't great at presenting new ideas - taking teachers too >>>>>>>>> seriously can be as much of problem as not taking them seriously >>>>>>>>> enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU. >>>>>>>>
Times haven't changed much since I was an undergrad: listen to the >>>>>>>> lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the >>>>>>> dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students >>>>>> can. That's obviously absurd.
It does require the kind of active participation that would have been >>>>>>> beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH >>>>>> ships, pipeline supervisory controls, modems, flight hardware for the >>>>>> C5A.
How about you?
I think that three or four of the various capstone team members may be >>>>>> keepers. Two seem to be geniuses. Student projects are a great way to >>>>>> do, basically, extended interviews.
And somehow, after four years of that, they dress up in silly caps and >>>>>>>> gowns [1] and get a piece of paper that magically makes them able to >>>>>>>> think.
The university of Melbourne let me graduate in absentia as an M.Sc, if I
rent the Ph.D. gown and sat on the podium for the Ph.D. graduation >>>>>>> ceremony, which my parents enjoyed watching. My father showed up with >>>>>>> black and white film in his camera so the scarlet Ph.D. robe didn't get >>>>>>> recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does have
legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and >>>>>>>> have a chance of eventually designing electronics, or at least >>>>>>>> assisting.
2% of them may had have their perceptions crippled to the point that >>>>>>> they can communicate at the dumbed-down level that you can handle. >>>>>>
But if you are interviewing the candidatates to work how like John Larkin >>>>> they are there's not a lot point in an extended intrerview.
Thinking about electronics in a productive way can take place in a >>>>>>> variety of way. Education is more about letting you find ways of >>>>>>> communicating those various sorts of insight. You can do electronics, >>>>>>> but you can't talk about it all that well, which is where your 2% >>>>>>> probably comes from.
There's an interesting technical issue with one current project. It >>>>>> involves executing, basically, a Spice simulation in an FPGA in real >>>>>> time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The kind >>>>> of simulation you'd run in an FPGA should be paralleled. Any FPGA can >>>>> run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just have >>>>> been difficult to explain to an unsophisticated audience.
Au contraire! I think that translating a Spice circuit description
into FPGA code should work very well indeed. I haven't searched,
but the software to do so very likely already exists somewhere.
LT Spice is a compiler that maps the schematic to x86 machine code,
but that's still a procedural language that executes sequentially. It
has to do all sorts of math tricks to be stable at, equivalently, low
compute clock rates.
An FPGA can run massively parallel, a computation every clock for
every node in the circuit. That wouldn't need the fancy convergence
tricks.
The crucial point is that Spice is a finite difference implementation of
numerical integration. The "fancy convergence" tricks just get around
the fact that numerical integration is unstable if the step size gets
too big.
Right. And a procedural program runs slow, crunching one node at a
time, so step size has to be big or it runs all afternoon.
The instability isn't in the sequential operation, but rather in the
finite differences (which can be too big to allow stable numerical
integration for short time constant differential equations).
I have Spice sims that run PPMs of real time, sometimes nanoseconds or
even picoseconds per second... erratically That can be really
annoying. An FPGA sim would flip that over and run thousands of times
faster than real time.
It wouldn't. The instability is a feature of the finite difference
approach, not the sequential operation.
A massively parallel process or can take small stable steps, but run
billions of them a second. As a sim has more nodes, we'd just use more
of the FPGA but not slow down.
LT Spice allows one to set a maximum time step, but not a minimum,
much less a fixed one.
"Numerical integration is unstable if the step size gets too big."
Sure, so keep the steps small. But run them fast.
I've proposed using a DDS, or at least an NCO, to program the
execution rate in our FPGA sims.
If you want to control the timing of the signals that come out of your
sim, that is essential. An NCO ought to be infinitely flexible up to it
maximum clock rate, but it is harder to get a precisely defined clock
rate out of it.
It averages right.
We'll start with SPI ADCs and DACs and overlap them at 1 MHz. We can
run the sim algorithms in parallel at any speed, 100 MHz or 100 Hz.
I've been simulating some. It's surprising how a stepsize of 0.1 tau simulates an RC very well, even with dumb rectangular integration and
no tricks. 0.02, 50 steps, is fabulously accurate.
I've wondered why LT Spice doesn't use the graphics processor that
most computers have. That would speed up sims by hundreds of times.
I run some sims that take 20 minutes. That's annoying and bad for
learning.
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com>
wrote:
Right. And a procedural program runs slow, crunching one node at a
time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once.
It is hard to effectively
parallelise opperations on the sparse matrices, and you certainly
don't get an X speedup by using X cores.
There's plenty of good work been done on this in industry. It's all >unpublished.
Academia have been playing about with this for decades. This is an
example paper :
https://eprints.soton.ac.uk/id/eprint/364713/1/paper.pdf
On 18/11/2026 4:57 pm, john larkin wrote:
On Wed, 18 Nov 2026 15:08:26 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 18/11/2026 2:43 am, john larkin wrote:
On Tue, 17 Nov 2026 09:25:33 +0100, Jeroen Belleman
<jeroen@nospam.please> wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>>>> wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn >>>>>>>>>>> <ksi@koi8.net> wrote:
<snip>
Nightmare. It's probably not fixable.
Being the industry leader is difficult, and staying there even more >>>>>>>>>> difficult. The US hasn't got as big a talent pool as China to >>>>>>>>>> dredge for
people who might be able to fix the problems, and while both countries
are educating most of the rising generation, rich and powerful parents
in both countries have ways of ensuring that their kids get the >>>>>>>>>> best of
the opportunities around.
Finland - in theory - does better, but my wife found that their >>>>>>>>>> graduate
students weren't great at presenting new ideas - taking teachers too >>>>>>>>>> seriously can be as much of problem as not taking them seriously >>>>>>>>>> enough.
I'm sponsoring three senior capstone projects, at CalPoly and SFSU. >>>>>>>>>
Times haven't changed much since I was an undergrad: listen to the >>>>>>>>> lectures, memorize the formulas, execute the formulas.
Graduate students have to read and review the literature, reject the >>>>>>>> dross and get the good stuff up to date.
That's the academic party line: undergrads don't design, grad students >>>>>>> can. That's obviously absurd.
It does require the kind of active participation that would have been >>>>>>>> beyond you.
As an undergrad, I designed throttle and boiler controls for the LASH >>>>>>> ships, pipeline supervisory controls, modems, flight hardware for the >>>>>>> C5A.
How about you?
I think that three or four of the various capstone team members may be >>>>>>> keepers. Two seem to be geniuses. Student projects are a great way to >>>>>>> do, basically, extended interviews.
And somehow, after four years of that, they dress up in silly caps and
gowns [1] and get a piece of paper that magically makes them able to >>>>>>>>> think.
The university of Melbourne let me graduate in absentia as an M.Sc, if I
rent the Ph.D. gown and sat on the podium for the Ph.D. graduation >>>>>>>> ceremony, which my parents enjoyed watching. My father showed up with >>>>>>>> black and white film in his camera so the scarlet Ph.D. robe didn't get
recorded in its full glory.
Nobody sane thinks that the ceremony has any actual effect. It does have
legal significance, which is presumably magical.
I estimate that about 2% of the CE/EE grads understand electricity and
have a chance of eventually designing electronics, or at least >>>>>>>>> assisting.
2% of them may had have their perceptions crippled to the point that >>>>>>>> they can communicate at the dumbed-down level that you can handle. >>>>>>>
But if you are interviewing the candidatates to work how like John Larkin
they are there's not a lot point in an extended intrerview.
Thinking about electronics in a productive way can take place in a >>>>>>>> variety of way. Education is more about letting you find ways of >>>>>>>> communicating those various sorts of insight. You can do electronics, >>>>>>>> but you can't talk about it all that well, which is where your 2% >>>>>>>> probably comes from.
There's an interesting technical issue with one current project. It >>>>>>> involves executing, basically, a Spice simulation in an FPGA in real >>>>>>> time. Solving that, making it actually work before May, will be
educational for everyone involved.
Spice is written in a high level language for serial execution. The kind >>>>>> of simulation you'd run in an FPGA should be paralleled. Any FPGA can >>>>>> run quite a few threads in parallel.
It sounds as if the project is ill-conceived, though it may just have >>>>>> been difficult to explain to an unsophisticated audience.
Au contraire! I think that translating a Spice circuit description
into FPGA code should work very well indeed. I haven't searched,
but the software to do so very likely already exists somewhere.
LT Spice is a compiler that maps the schematic to x86 machine code,
but that's still a procedural language that executes sequentially. It
has to do all sorts of math tricks to be stable at, equivalently, low
compute clock rates.
An FPGA can run massively parallel, a computation every clock for
every node in the circuit. That wouldn't need the fancy convergence
tricks.
The crucial point is that Spice is a finite difference implementation of >>> numerical integration. The "fancy convergence" tricks just get around
the fact that numerical integration is unstable if the step size gets
too big.
Right. And a procedural program runs slow, crunching one node at a
time, so step size has to be big or it runs all afternoon.
It can't be too big - if it is the numerical integration routine goes >unstable and produces meaningless results.
The instability isn't in the sequential operation, but rather in the
finite differences (which can be too big to allow stable numerical
integration for short time constant differential equations).
I have Spice sims that run PPMs of real time, sometimes nanoseconds or >>>> even picoseconds per second... erratically That can be really
annoying. An FPGA sim would flip that over and run thousands of times
faster than real time.
It wouldn't. The instability is a feature of the finite difference
approach, not the sequential operation.
A massively parallel process or can take small stable steps, but run
billions of them a second. As a sim has more nodes, we'd just use more
of the FPGA but not slow down.
That's the theory, and always has been. Getting it to work in practice >doesn't seem to be quite as easy as you seem to think.
LT Spice allows one to set a maximum time step, but not a minimum,
much less a fixed one.
"Numerical integration is unstable if the step size gets too big."
Sure, so keep the steps small. But run them fast.
I've proposed using a DDS, or at least an NCO, to program the
execution rate in our FPGA sims.
If you want to control the timing of the signals that come out of your
sim, that is essential. An NCO ought to be infinitely flexible up to it
maximum clock rate, but it is harder to get a precisely defined clock
rate out of it.
It averages right.
Only if you regulate it carefully to get that result.
We'll start with SPI ADCs and DACs and overlap them at 1 MHz. We can
run the sim algorithms in parallel at any speed, 100 MHz or 100 Hz.
If I remember rightly, there's a matrix inversion after every step of a >Spice simulation. For my Ph.D. work I used numerical integration to
simulate the chemical reaction I was looking at. The chemical reaction
also produced temperature changes and mass flows which were coupled, and
I set up a numerical integration program to simulate all three effects.
It ran ten times more slowly than the simulation of just the chemical >reaction, and the matrix inversion stage didn't help. It was still a lot >simpler than a Spice circuit simulation and was looking at different >differential equations
But since you don't seem to know what you are doing, it's unlikely to do >what you want it to.
I've been simulating some. It's surprising how a stepsize of 0.1 tau
simulates an RC very well, even with dumb rectangular integration and
no tricks. 0.02, 50 steps, is fabulously accurate.
There are lots of different tau values inside a Spice simulation, it's
the smallest smallest time - the fastest loop -that constrains the step >size.
I've wondered why LT Spice doesn't use the graphics processor that
most computers have. That would speed up sims by hundreds of times.
If you could program the calculations to run in the graphics processor. >Graphic processors have been around for quite a while. Somebody ought to >have tried it.
I run some sims that take 20 minutes. That's annoying and bad for
learning.
Tough. Get a faster processor, or simulate a more tractable process.
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com>
wrote:
Right. And a procedural program runs slow, crunching one node at a
time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once. It is hard to effectively
parallelise opperations on the sparse matrices, and you certainly
don't get an X speedup by using X cores.
There's plenty of good work been done on this in industry. It's all unpublished.
Academia have been playing about with this for decades. This is an
example paper :
https://eprints.soton.ac.uk/id/eprint/364713/1/paper.pdf
On Wed, 18 Nov 2026 06:33:45 +0000, JM
<sunaecoNoChoppedPork@gmail.com> wrote:
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com>
wrote:
Right. And a procedural program runs slow, crunching one node at a
time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once.
How can an X86, or any other CPU, crunch a hundred node calcs
simultaneously.
It is hard to effectively
parallelise opperations on the sparse matrices, and you certainly
don't get an X speedup by using X cores.
Adding threads in LT Spice doesn't seem to help much.
There's plenty of good work been done on this in industry. It's all
unpublished.
Academia have been playing about with this for decades. This is an
example paper :
https://eprints.soton.ac.uk/id/eprint/364713/1/paper.pdf
Yes, acdemics have verbally abused me for my primitive simulations of shipboard propulsion systems. But they work.
Creative title, that. Paper.pdf
My other favorites are datasheet.pdf and resume.final.pdf.
On Thu, 19 Nov 2026 01:27:54 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 18/11/2026 4:57 pm, john larkin wrote:
On Wed, 18 Nov 2026 15:08:26 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 18/11/2026 2:43 am, john larkin wrote:
On Tue, 17 Nov 2026 09:25:33 +0100, Jeroen Belleman
<jeroen@nospam.please> wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>>>>> wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn >>>>>>>>>>>> <ksi@koi8.net> wrote:
If you want to control the timing of the signals that come out of your >>>> sim, that is essential. An NCO ought to be infinitely flexible up to it >>>> maximum clock rate, but it is harder to get a precisely defined clock
rate out of it.
It averages right.
Only if you regulate it carefully to get that result.
I'm an engineer. We have to be careful or things will crash and people
will get hurt.
We'll start with SPI ADCs and DACs and overlap them at 1 MHz. We can
run the sim algorithms in parallel at any speed, 100 MHz or 100 Hz.
If I remember rightly, there's a matrix inversion after every step of a
Spice simulation. For my Ph.D. work I used numerical integration to
simulate the chemical reaction I was looking at. The chemical reaction
also produced temperature changes and mass flows which were coupled, and
I set up a numerical integration program to simulate all three effects.
It ran ten times more slowly than the simulation of just the chemical
reaction, and the matrix inversion stage didn't help. It was still a lot
simpler than a Spice circuit simulation and was looking at different
differential equations
But since you don't seem to know what you are doing, it's unlikely to do
what you want it to.
See the screen shot that I posted in a thread below. Fun. Works great.
I've been simulating some. It's surprising how a stepsize of 0.1 tau
simulates an RC very well, even with dumb rectangular integration and
no tricks. 0.02, 50 steps, is fabulously accurate.
There are lots of different tau values inside a Spice simulation, it's
the smallest smallest time - the fastest loop -that constrains the step
size.
I've wondered why LT Spice doesn't use the graphics processor that
most computers have. That would speed up sims by hundreds of times.
If you could program the calculations to run in the graphics processor.
Graphic processors have been around for quite a while. Somebody ought to
have tried it.
I run some sims that take 20 minutes. That's annoying and bad for
learning.
Tough. Get a faster processor, or simulate a more tractable process.
Get a job.
On 19/11/2026 2:59 am, john larkin wrote:
On Wed, 18 Nov 2026 06:33:45 +0000, JM
<sunaecoNoChoppedPork@gmail.com> wrote:
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com>
wrote:
Right. And a procedural program runs slow, crunching one node at a
time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once.
How can an X86, or any other CPU, crunch a hundred node calcs
simultaneously.
Lots of them in parallel can. But the results of each step have to be >treated as matrix, which has to be inverted before you can go to
calculate the next step.
It is hard to effectively
parallelise opperations on the sparse matrices, and you certainly
don't get an X speedup by using X cores.
Adding threads in LT Spice doesn't seem to help much.
The compiler is unlikely to have done it for you.
There's plenty of good work been done on this in industry. It's all
unpublished.
Academia have been playing about with this for decades. This is an
example paper :
https://eprints.soton.ac.uk/id/eprint/364713/1/paper.pdf
Yes, acdemics have verbally abused me for my primitive simulations of
shipboard propulsion systems. But they work.
They presumably worked well enough for the job you wrote them to do. You >probably didn't explain what you'd done all that clearly.
Creative title, that. Paper.pdf
My other favorites are datasheet.pdf and resume.final.pdf.
You have to write a lot of papers before unambiguous and informative
titles get to be worth extra effort.
On 19/11/2026 3:03 am, john larkin wrote:
On Thu, 19 Nov 2026 01:27:54 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 18/11/2026 4:57 pm, john larkin wrote:
On Wed, 18 Nov 2026 15:08:26 +1100, Bill Sloman <bill.sloman@ieee.org> >>>> wrote:
On 18/11/2026 2:43 am, john larkin wrote:
On Tue, 17 Nov 2026 09:25:33 +0100, Jeroen Belleman
<jeroen@nospam.please> wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn >>>>>>>>>>>>> <ksi@koi8.net> wrote:
<snip>
If you want to control the timing of the signals that come out of your >>>>> sim, that is essential. An NCO ought to be infinitely flexible up to it >>>>> maximum clock rate, but it is harder to get a precisely defined clock >>>>> rate out of it.
It averages right.
Only if you regulate it carefully to get that result.
I'm an engineer. We have to be careful or things will crash and people
will get hurt.
You do keep on claiming that you are an engineer. Being careful does
depend on you understanding what you are doing, and you claim that too.
We'll start with SPI ADCs and DACs and overlap them at 1 MHz. We can
run the sim algorithms in parallel at any speed, 100 MHz or 100 Hz.
If I remember rightly, there's a matrix inversion after every step of a
Spice simulation. For my Ph.D. work I used numerical integration to
simulate the chemical reaction I was looking at. The chemical reaction
also produced temperature changes and mass flows which were coupled, and >>> I set up a numerical integration program to simulate all three effects.
It ran ten times more slowly than the simulation of just the chemical
reaction, and the matrix inversion stage didn't help. It was still a lot >>> simpler than a Spice circuit simulation and was looking at different
differential equations
But since you don't seem to know what you are doing, it's unlikely to do >>> what you want it to.
See the screen shot that I posted in a thread below. Fun. Works great.
To your complete satifaction. The point about Spice is that it simulates >coupled processes. Simulating a single RC and going to the trouble of >posting the result does suggest that you haven't got the first clue
about what you ought to be trying to do.
On 11/14/2026 3:18 PM, Sergey Kubushyn wrote:
and why the entire company, not just Azure and stuff, should've been longMS has never been a "tech powerhouse".ÿ Their skill has been in cornering
shot dead to put it out of its misery.
https://isolveproblems.substack.com/p/how-microsoft-vaporized-a-trillion
Higly recommended reading. Long, in 6 parts, but very informative.
And clearly telling that this massive failure is not just a bad
accident. It
is just a beginning of the fall of the empire.
There is NOTHING that could be done to fix it and cure the dying
giant. It
is terminal and uncurable. The giant is doomed.
a market.
A market that has now slipped away from them -- alternative OSs (esp
FOSS offerings) and platforms.
Their hardware has always been laughable (though some of the surface offerings are tolerable but don't really stand out among similar
offerings in that market segment)
Microsoft phones??ÿ PDAs??
They have spent so much time tied to the past that they have missed out
on the future.
On 11/15/26 01:15, Don Y wrote:
On 11/14/2026 3:18 PM, Sergey Kubushyn wrote:
and why the entire company, not just Azure and stuff, should've been long >>> shot dead to put it out of its misery.MS has never been a "tech powerhouse".ÿ Their skill has been in cornering
https://isolveproblems.substack.com/p/how-microsoft-vaporized-a-trillion >>>
Higly recommended reading. Long, in 6 parts, but very informative.
And clearly telling that this massive failure is not just a bad accident. It
is just a beginning of the fall of the empire.
There is NOTHING that could be done to fix it and cure the dying giant. It >>> is terminal and uncurable. The giant is doomed.
a market.
A market that has now slipped away from them -- alternative OSs (esp
FOSS offerings) and platforms.
Their hardware has always been laughable (though some of the surface
offerings are tolerable but don't really stand out among similar
offerings in that market segment)
Microsoft phones??ÿ PDAs??
They have spent so much time tied to the past that they have missed out on >> the future.
majority of MS revenue is cloud and a majority of the VMs in Azure is running
linux
On Thu, 19 Nov 2026 20:58:36 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 19/11/2026 3:03 am, john larkin wrote:
On Thu, 19 Nov 2026 01:27:54 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 18/11/2026 4:57 pm, john larkin wrote:
On Wed, 18 Nov 2026 15:08:26 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>> wrote:
On 18/11/2026 2:43 am, john larkin wrote:
On Tue, 17 Nov 2026 09:25:33 +0100, Jeroen Belleman
<jeroen@nospam.please> wrote:
On 11/17/26 06:34, Bill Sloman wrote:
On 17/11/2026 3:05 am, john larkin wrote:
On Mon, 16 Nov 2026 15:09:21 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 16/11/2026 2:34 am, john larkin wrote:
On Mon, 16 Nov 2026 00:19:14 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 15/11/2026 11:56 am, john larkin wrote:
On Sat, 14 Nov 2026 22:18:31 -0000 (UTC), Sergey Kubushyn >>>>>>>>>>>>>> <ksi@koi8.net> wrote:
<snip>
If you want to control the timing of the signals that come out of your >>>>>> sim, that is essential. An NCO ought to be infinitely flexible up to it >>>>>> maximum clock rate, but it is harder to get a precisely defined clock >>>>>> rate out of it.
It averages right.
Only if you regulate it carefully to get that result.
I'm an engineer. We have to be careful or things will crash and people
will get hurt.
You do keep on claiming that you are an engineer. Being careful does
depend on you understanding what you are doing, and you claim that too.
We'll start with SPI ADCs and DACs and overlap them at 1 MHz. We can >>>>> run the sim algorithms in parallel at any speed, 100 MHz or 100 Hz.
If I remember rightly, there's a matrix inversion after every step of a >>>> Spice simulation. For my Ph.D. work I used numerical integration to
simulate the chemical reaction I was looking at. The chemical reaction >>>> also produced temperature changes and mass flows which were coupled, and >>>> I set up a numerical integration program to simulate all three effects. >>>>
It ran ten times more slowly than the simulation of just the chemical
reaction, and the matrix inversion stage didn't help. It was still a lot >>>> simpler than a Spice circuit simulation and was looking at different
differential equations
But since you don't seem to know what you are doing, it's unlikely to do >>>> what you want it to.
See the screen shot that I posted in a thread below. Fun. Works great.
To your complete satisfaction. The point about Spice is that it simulates
coupled processes. Simulating a single RC and going to the trouble of
posting the result does suggest that you haven't got the first clue
about what you ought to be trying to do.
I'm working with a team of five college seniors to design and build a
box that simulates aerospace sensors electrically, in real time. We're basically moving Spice type algorithms into FPGA hardware.
I'm actually more interested in evaluating the kids than the
algorithms.
On Thu, 19 Nov 2026 18:56:48 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 19/11/2026 2:59 am, john larkin wrote:
On Wed, 18 Nov 2026 06:33:45 +0000, JM
<sunaecoNoChoppedPork@gmail.com> wrote:
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com>
wrote:
Right. And a procedural program runs slow, crunching one node at a
time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once.
How can an X86, or any other CPU, crunch a hundred node calcs
simultaneously.
Lots of them in parallel can. But the results of each step have to be
treated as matrix, which has to be inverted before you can go to
calculate the next step.
I never did that fancy stuff. The ships worked just like the sims.
It is hard to effectively
parallelise opperations on the sparse matrices, and you certainly
don't get an X speedup by using X cores.
Adding threads in LT Spice doesn't seem to help much.
The compiler is unlikely to have done it for you.
The number of threads is a menu option in LT Spice, but doesn't seem
to make much difference. The choice of solver matters a lot more. Some
of my sims need the gear solver to not hang up.
There's plenty of good work been done on this in industry. It's all
unpublished.
Academia have been playing about with this for decades. This is an
example paper :
https://eprints.soton.ac.uk/id/eprint/364713/1/paper.pdf
Yes, acdemics have verbally abused me for my primitive simulations of
shipboard propulsion systems. But they work.
They presumably worked well enough for the job you wrote them to do. You
probably didn't explain what you'd done all that clearly.
Sure I explained it, which is why experts complained.
In a control system, one has, essentially, zero-output-impedance
blocks here and there, unilateral elements, which don't need fancy
matrix algorithms to work.
Modeling the propeller and the hull dynamics was more like having
interacting nodes, but the time steps could be 1/1000 of the time
constants, so that just worked. 120 RPM was flat out on LASH ships and
DDs.
Creative title, that. Paper.pdf
My other favorites are datasheet.pdf and resume.final.pdf.
You have to write a lot of papers before unambiguous and informative
titles get to be worth extra effort.
Like your name in the resume? Or the part number in the data sheet?
TI must encrypt part numbers into .pdf file names somehow.
On 20/11/2026 2:40 am, john larkin wrote:
On Thu, 19 Nov 2026 18:56:48 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 19/11/2026 2:59 am, john larkin wrote:
On Wed, 18 Nov 2026 06:33:45 +0000, JM
<sunaecoNoChoppedPork@gmail.com> wrote:
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com> >>>>> wrote:
Right. And a procedural program runs slow, crunching one node at a >>>>>> time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once.
How can an X86, or any other CPU, crunch a hundred node calcs
simultaneously.
Lots of them in parallel can. But the results of each step have to be
treated as matrix, which has to be inverted before you can go to
calculate the next step.
I never did that fancy stuff. The ships worked just like the sims.
My Ph.D. work did rely on integrating a single differential equation and
all the experimental results written up in the thesis reflect this.
I did go to the trouble of setting up system of three differential
equations to track the heat flows and the mass flows, and it produced
pretty much the same results at one tenth of the speed, so I didn't
bother using it on every experiment run.
On Fri, 20 Nov 2026 16:58:35 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 20/11/2026 2:40 am, john larkin wrote:
On Thu, 19 Nov 2026 18:56:48 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 19/11/2026 2:59 am, john larkin wrote:
On Wed, 18 Nov 2026 06:33:45 +0000, JM
<sunaecoNoChoppedPork@gmail.com> wrote:
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com> >>>>>> wrote:
Right. And a procedural program runs slow, crunching one node at a >>>>>>> time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once.
How can an X86, or any other CPU, crunch a hundred node calcs
simultaneously.
Lots of them in parallel can. But the results of each step have to be
treated as matrix, which has to be inverted before you can go to
calculate the next step.
I never did that fancy stuff. The ships worked just like the sims.
My Ph.D. work did rely on integrating a single differential equation and
all the experimental results written up in the thesis reflect this.
I did go to the trouble of setting up system of three differential
equations to track the heat flows and the mass flows, and it produced
pretty much the same results at one tenth of the speed, so I didn't
bother using it on every experiment run.
Heat flow is easy. Just divide the thing into points or cubes and keep averaging every element's temperature with its neighbors.
ATLC does the same sort of thing with voltages and conductors and
insulators, to simulate complex transmission line geometries.
There is probably a similar sheet-resistance calculator somewhere. I
need to do that now and then, which I do with a sheet of copper-clad
FR4 and some test equipment.
On 21/11/2026 5:20 am, john larkin wrote:
On Fri, 20 Nov 2026 16:58:35 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 20/11/2026 2:40 am, john larkin wrote:
On Thu, 19 Nov 2026 18:56:48 +1100, Bill Sloman <bill.sloman@ieee.org> >>>> wrote:
On 19/11/2026 2:59 am, john larkin wrote:
On Wed, 18 Nov 2026 06:33:45 +0000, JM
<sunaecoNoChoppedPork@gmail.com> wrote:
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com> >>>>>>> wrote:
Right. And a procedural program runs slow, crunching one node at a >>>>>>>> time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once.
How can an X86, or any other CPU, crunch a hundred node calcs
simultaneously.
Lots of them in parallel can. But the results of each step have to be >>>>> treated as matrix, which has to be inverted before you can go to
calculate the next step.
I never did that fancy stuff. The ships worked just like the sims.
My Ph.D. work did rely on integrating a single differential equation and >>> all the experimental results written up in the thesis reflect this.
I did go to the trouble of setting up system of three differential
equations to track the heat flows and the mass flows, and it produced
pretty much the same results at one tenth of the speed, so I didn't
bother using it on every experiment run.
Heat flow is easy. Just divide the thing into points or cubes and keep
averaging every element's temperature with its neighbors.
ATLC does the same sort of thing with voltages and conductors and
insulators, to simulate complex transmission line geometries.
There is probably a similar sheet-resistance calculator somewhere. I
need to do that now and then, which I do with a sheet of copper-clad
FR4 and some test equipment.
You miss the point that the differential equations involved are coupled,
and simulating the whole system creates the same sorts of instability >problems that Spice has to deal with.
ATLC is wonderful. It was written by an amateur who didn't know much
theory.
On Sat, 21 Nov 2026 15:39:53 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 21/11/2026 5:20 am, john larkin wrote:
On Fri, 20 Nov 2026 16:58:35 +1100, Bill Sloman <bill.sloman@ieee.org>
wrote:
On 20/11/2026 2:40 am, john larkin wrote:
On Thu, 19 Nov 2026 18:56:48 +1100, Bill Sloman <bill.sloman@ieee.org> >>>>> wrote:
On 19/11/2026 2:59 am, john larkin wrote:
On Wed, 18 Nov 2026 06:33:45 +0000, JM
<sunaecoNoChoppedPork@gmail.com> wrote:
On Tue, 17 Nov 2026 21:57:51 -0800, john larkin <jl@glen--canyon.com> >>>>>>>> wrote:
Right. And a procedural program runs slow, crunching one node at a >>>>>>>>> time, so step size has to be big or it runs all afternoon.
No, all nodes are calculated at once.
How can an X86, or any other CPU, crunch a hundred node calcs
simultaneously.
Lots of them in parallel can. But the results of each step have to be >>>>>> treated as matrix, which has to be inverted before you can go to
calculate the next step.
I never did that fancy stuff. The ships worked just like the sims.
My Ph.D. work did rely on integrating a single differential equation and >>>> all the experimental results written up in the thesis reflect this.
I did go to the trouble of setting up system of three differential
equations to track the heat flows and the mass flows, and it produced
pretty much the same results at one tenth of the speed, so I didn't
bother using it on every experiment run.
Heat flow is easy. Just divide the thing into points or cubes and keep
averaging every element's temperature with its neighbors.
ATLC does the same sort of thing with voltages and conductors and
insulators, to simulate complex transmission line geometries.
There is probably a similar sheet-resistance calculator somewhere. I
need to do that now and then, which I do with a sheet of copper-clad
FR4 and some test equipment.
You miss the point that the differential equations involved are coupled,
and simulating the whole system creates the same sorts of instability
problems that Spice has to deal with.
The thermal model is a 3d mesh of 1st order RCs. The simple iteration
settles down nicely.
It's interesting (well, to some of us) that thermal systems never
oscillate, never ring.
On Sat, 21 Nov 2026 07:19:35 -0800, john larkin <jl@glen--canyon.com>
wrote:
ATLC is wonderful. It was written by an amateur who didn't know much
theory.
Really? Did Dave get his three engineering degrees from some mail
order university?
Not that he needed any theory, the original version of atlc was just a
C port of the example Fortran inplementation of the Gauss-Seidel
procedure listed Dworsky's transmission line book.
Must be at least 30 lines of code.
You're just as quick inputing the 2-D outline of the line conductors
as fixed potentials in cells on a spreadsheet and doing the
calculations there.
| Sysop: | Jacob Catayoc |
|---|---|
| Location: | Pasay City, Metro Manila, Philippines |
| Users: | 5 |
| Nodes: | 4 (0 / 4) |
| Uptime: | 498678:21:26 |
| Calls: | 212 |
| Calls today: | 3 |
| Files: | 912 |
| D/L today: |
31 files (22,593K bytes) |
| Messages: | 69,867 |