• Re: tough TIA

    From someone@3:633/10 to All on Monday, November 09, 2026 17:00:02
    There was a design news story a few decades ago about a hefty commercial mains line transient absorber built around a FW bridge. The design simply hung some heavy-duty e-caps off an unloaded bridge, which would then clamp anything with amplitude in excess of the mains average peak. It was tested with 20 kV transient peaks in the millisecond duration range and clamped the impulse nearly instantaneously.

    --
    For full context, visit https://www.electrondepot.com/electrodesign/tough-tia-4421807-.htm


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From john larkin@3:633/10 to All on Monday, November 09, 2026 19:31:07
    On Mon, 09 Nov 2026 17:00:02 +0000, someone <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com> wrote:

    There was a design news story a few decades ago about a hefty commercial mains line transient absorber built around a FW bridge. The design simply hung some heavy-duty e-caps off an unloaded bridge, which would then clamp anything with amplitude in excess of the mains average peak. It was tested with 20 kV transient peaks in the millisecond duration range and clamped the impulse nearly instantaneously.

    Some of my guys just tried using a big SCR for an "emergency"
    capacitor discharge circuit. They tested it at about 4000 joules.
    That's about the energy in a 12-gage shotgun, both barrels.

    I could have told them what would happen. The wimpy gate drive didn't
    help a bit.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Liz Tuddenham@3:633/10 to All on Tuesday, November 10, 2026 10:12:58
    john larkin <jl@glen--canyon.com> wrote:

    On Mon, 09 Nov 2026 17:00:02 +0000, someone <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.
    wrote:


    Some of my guys just tried using a big SCR for an "emergency"
    capacitor discharge circuit. They tested it at about 4000 joules.
    That's about the energy in a 12-gage shotgun, both barrels.

    I could have told them what would happen. The wimpy gate drive didn't
    help a bit.

    Did anyone check whether the capacitor was completely discharged or were
    just the innards of the SCR discharged?

    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)