• Re: So, what is it about freezers that's so appealing?

    From Don Y@3:633/10 to All on Saturday, November 07, 2026 09:45:40
    On 11/6/2026 4:58 PM, Nicolas Paul Colin de Glocester wrote:

    Both incidents highlight the vulnerability of refrigeration systems
    connected to remote monitoring and control software, although no
    connection between the two has been established.
    But, to answer the question I posed in the subject line...

    I suspect freezers are more noticeable. Would anyone notice
    a "warming tray" that suddenly had been turned off, allowing
    the warmed items to "cool"?

    I suspect the perpetrators want to be *seen* and not just prove
    (to themselves -- which would be immediately apparent once they'd
    access <whatever>) that they could do these things.

    If you hacked the electric grid, you'd likely evoke an
    aggressive response. Ditto telecom or any media distribution
    system.

    Freezers are noticeable events without getting everyone
    riled up about the breach. So, you can "practice" for the
    time when you want to have more devastating results and
    still put fear in the populace.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Cóilín Nioclásín Glostéir@3:633/10 to All on Monday, November 09, 2026 10:52:46
    "Discussions, Science, No.24 Jan. 8, 2015
    The Truth behind the STAP Cell Case Reality of research institutions, international competition, morality of researchers ? Why wasn?t the
    fraud avoidable?
    Panel discussion by SAKURA Osamu (Professor, Interfaculty Initiative
    in Information Studies, University of Tokyo), KATASE Kumiko (Science
    writer) and YASHIRO Yoshimi (Research Associate Professor, Center for
    iPS Cell Research and Application, Kyoto University)

    [. . .]

    Sakura Osamu

    Born in 1960. Graduated from the Department of Psychology at the
    University of Tokyo. PhD., Graduate School of Science at Kyoto
    University. [. . .] Authored books include [. . .] and Benri wa hito
    wo fukou ni suru (Convenience makes people unfortunate),"
    says
    HTTPS://WWW.JapanPolicyForum.Jp/discussions/pt201501080801404657.html

    (S. HTTP://Gloucester.Insomnia247.NL/ fuer Kontaktdaten!)

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin Brown@3:633/10 to All on Monday, November 09, 2026 19:18:43
    On 07/11/2026 16:45, Don Y wrote:
    On 11/6/2026 4:58 PM, Nicolas Paul Colin de Glocester wrote:

    Both incidents highlight the vulnerability of refrigeration systems
    connected to remote monitoring and control software, although no
    connection between the two has been established.
    But, to answer the question I posed in the subject line...

    I suspect freezers are more noticeable.ÿ Would anyone notice
    a "warming tray" that suddenly had been turned off, allowing
    the warmed items to "cool"?

    I suspect the perpetrators want to be *seen* and not just prove
    (to themselves -- which would be immediately apparent once they'd
    access <whatever>) that they could do these things.

    If you hacked the electric grid, you'd likely evoke an
    aggressive response.ÿ Ditto telecom or any media distribution
    system.

    Freezers are noticeable events without getting everyone
    riled up about the breach.ÿ So, you can "practice" for the
    time when you want to have more devastating results and
    still put fear in the populace.

    As of this afternoon the French Foreign Ministry is directly accusing
    Iran of being behind the cyber attacks on their fridges.

    https://www.bbc.co.uk/news/articles/cmg474vk6dyqo

    --
    Martin Brown


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Monday, November 09, 2026 12:23:34
    On 11/9/2026 12:18 PM, Martin Brown wrote:
    Freezers are noticeable events without getting everyone
    riled up about the breach.ÿ So, you can "practice" for the
    time when you want to have more devastating results and
    still put fear in the populace.

    As of this afternoon the French Foreign Ministry is directly accusing Iran of
    being behind the cyber attacks on their fridges.

    https://www.bbc.co.uk/news/articles/cmg474vk6dyqo
    But, again, what is the strategic point? To "strike terror" in
    the hearts of people who can no longer buy chocolate ice cream?

    Is it just "practice" (you don't want to squander any successes on a
    REAL target alerting them to your abilities and their vulnerabilities)?

    Is it a manifestation of the LIMITS of their abilities? Or, an insinuation
    of what MORE they might be able to do?

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin Brown@3:633/10 to All on Tuesday, November 10, 2026 09:50:43
    On 09/11/2026 19:23, Don Y wrote:
    On 11/9/2026 12:18 PM, Martin Brown wrote:
    Freezers are noticeable events without getting everyone
    riled up about the breach.ÿ So, you can "practice" for the
    time when you want to have more devastating results and
    still put fear in the populace.

    As of this afternoon the French Foreign Ministry is directly accusing
    Iran of being behind the cyber attacks on their fridges.

    https://www.bbc.co.uk/news/articles/cmg474vk6dyqo
    But, again, what is the strategic point?ÿ To "strike terror" in
    the hearts of people who can no longer buy chocolate ice cream?

    I'd guess it is big enough to be very annoying without provoking a
    significant tactical response.

    Is it just "practice" (you don't want to squander any successes on a
    REAL target alerting them to your abilities and their vulnerabilities)?

    Very probably - picking the low hanging fruit (and they were hanging
    *very* low - default password was today's date on most of them).

    Is it a manifestation of the LIMITS of their abilities?ÿ Or, an insinuation of what MORE they might be able to do?

    I wouldn't underestimate their capabilities. After Stuxnet the Iranians
    will be looking to inflict equivalent damage on the West at some point.

    --
    Martin Brown


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Tuesday, November 10, 2026 23:02:37
    On 2026-11-05 22:16, Liz Tuddenham wrote:
    Carlos E. R. <robin_listas@es.invalid> wrote:

    [...]
    I have driven cars with almost no
    electronics besides the radio.

    That makes me feel old - when I learned to drive there were NO
    electronics in most cars. A few luxury models had a radio (valve, of
    course) but 'ordinary' cars didn't.

    But this was 1984.

    Renault had at least one lowly version of the Super 5 with a
    traditional, cheap motor with no electronics at all. Wait, I guess the alternator used diodes. Dunno about the alternator regulator. Maybe the blinkers?


    The first electonic device I fitted to my car was a windscreen wiper
    delay circuit using a BC108 and a thyristor.


    I added a circuit with two NAND gates (4000 series) to sound a buzzer if
    I left the lights on with ignition off. Two gates that could sink a
    largish current. Inserted it in the back of the cigarette ash tray,
    because it had a lighter that went active with the ignition, and a
    light, with the general lights. The two signals I needed.

    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Tuesday, November 10, 2026 23:07:43
    On 2026-11-09 20:18, Martin Brown wrote:
    On 07/11/2026 16:45, Don Y wrote:
    On 11/6/2026 4:58 PM, Nicolas Paul Colin de Glocester wrote:


    Freezers are noticeable events without getting everyone
    riled up about the breach.ÿ So, you can "practice" for the
    time when you want to have more devastating results and
    still put fear in the populace.

    As of this afternoon the French Foreign Ministry is directly accusing
    Iran of being behind the cyber attacks on their fridges.

    https://www.bbc.co.uk/news/articles/cmg474vk6dyqo


    Does not ring me as believable.

    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From john larkin@3:633/10 to All on Tuesday, November 10, 2026 18:59:50
    On Tue, 10 Nov 2026 23:07:43 +0100, "Carlos E.R."
    <robin_listas@es.invalid> wrote:

    On 2026-11-09 20:18, Martin Brown wrote:
    On 07/11/2026 16:45, Don Y wrote:
    On 11/6/2026 4:58 PM, Nicolas Paul Colin de Glocester wrote:


    Freezers are noticeable events without getting everyone
    riled up about the breach.? So, you can "practice" for the
    time when you want to have more devastating results and
    still put fear in the populace.

    As of this afternoon the French Foreign Ministry is directly accusing
    Iran of being behind the cyber attacks on their fridges.

    https://www.bbc.co.uk/news/articles/cmg474vk6dyqo


    Does not ring me as believable.

    Were the freezers full of pork sausages? Dogfood?


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Wednesday, November 11, 2026 14:31:47
    On 11/10/2026 2:50 AM, Martin Brown wrote:
    Is it a manifestation of the LIMITS of their abilities?ÿ Or, an insinuation >> of what MORE they might be able to do?

    I wouldn't underestimate their capabilities. After Stuxnet the Iranians will be
    looking to inflict equivalent damage on the West at some point.

    Yes, but why do *anything* publicly? What is the expected gain?
    Surely, citizens aren't going to cringe in fear at the prospect
    of not being able to purchase ice cream.

    And, the "response" doesn't likely involve many government resources.

    So, there doesn't seem to be any meaningful message (unless they
    thought their adversaries didn't expect them to have ANY cyber
    capabilities)

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin Brown@3:633/10 to All on Thursday, November 12, 2026 18:14:17
    On 11/11/2026 21:31, Don Y wrote:
    On 11/10/2026 2:50 AM, Martin Brown wrote:
    Is it a manifestation of the LIMITS of their abilities?ÿ Or, an
    insinuation
    of what MORE they might be able to do?

    I wouldn't underestimate their capabilities. After Stuxnet the
    Iranians will be looking to inflict equivalent damage on the West at
    some point.

    Yes, but why do *anything* publicly?ÿ What is the expected gain?
    Surely, citizens aren't going to cringe in fear at the prospect
    of not being able to purchase ice cream.

    Publicity for their cause assuming it was them...odd that they haven't
    so far claimed responsibility.

    It could equally well just be some modern script kiddies aided and
    abetted by an AI agent capable of mounting such an attack en masse.

    Don't underestimate the number of people who rely on immediate delivery
    of food when they need it. Amazon Prime etc has created an expectation
    in the populous that you can have anything anytime you want it.

    And, the "response" doesn't likely involve many government resources.

    So, there doesn't seem to be any meaningful message (unless they
    thought their adversaries didn't expect them to have ANY cyber
    capabilities)

    I expect a more serious one against the UK National Grid (or the US equivalent) at some stage. Generation I "smart" meters were always a
    disaster waiting to happen - insecure as hell. Their only redeeming
    feature was that they turned into dumb meters by changing supplier and
    now the discontinuation of 2G/œG signal scuppers them completely.

    It is a real tale of woe - you couldn't make it up!!

    https://www.theregister.com/networks/2026/11/10/smart-meters-to-cost-the-uk-billions-2g-switch-off-means-replacing-12-13-million/5308728

    --
    Martin Brown


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Thursday, November 12, 2026 13:45:12
    On 11/12/2026 11:14 AM, Martin Brown wrote:
    I wouldn't underestimate their capabilities. After Stuxnet the Iranians will
    be looking to inflict equivalent damage on the West at some point.

    Yes, but why do *anything* publicly?ÿ What is the expected gain?
    Surely, citizens aren't going to cringe in fear at the prospect
    of not being able to purchase ice cream.

    Publicity for their cause assuming it was them...odd that they haven't so far
    claimed responsibility.

    So, "kicking someone in the knee" is their way of getting sympathy???

    I could understand it from a terror standpoint -- get people thinking about
    how vulnerable they are. But, I would think the bar would be a bit higher
    to get people to REALLY notice.

    E.g., our local Costco (a large "warehouse club" store) suffered a power failure (some on-site equipment) and was out of service for a day or so.
    But, it was just an annoyance to most folks as they were open for business
    the next day.

    Crashing their corporate server(s) likely would have been far more consequential (had it actually been an adversarial action)

    It could equally well just be some modern script kiddies aided and abetted by
    an AI agent capable of mounting such an attack en masse.

    But, again, why freezers? Why not petrol pumps? Or, baby monitors?
    Or electronic doorbells?

    Is it just the lowest hanging fruit? Or, the first of a series of
    "waves" of vulnerability exploits?

    Don't underestimate the number of people who rely on immediate delivery of food
    when they need it. Amazon Prime etc has created an expectation in the populous
    that you can have anything anytime you want it.

    I suspect "need" is an overstatement; maybe "want" (I doubt anyone will go hungry if they don't get their FROZEN food delivery, today)

    And, the "response" doesn't likely involve many government resources.

    So, there doesn't seem to be any meaningful message (unless they
    thought their adversaries didn't expect them to have ANY cyber
    capabilities)

    I expect a more serious one against the UK National Grid (or the US equivalent)
    at some stage. Generation I "smart" meters were always a disaster waiting to happen - insecure as hell. Their only redeeming feature was that they turned into dumb meters by changing supplier and now the discontinuation of 2G/œG signal scuppers them completely.

    It is a real tale of woe - you couldn't make it up!!

    https://www.theregister.com/networks/2026/11/10/smart-meters-to-cost-the-uk- billions-2g-switch-off-means-replacing-12-13-million/5308728

    The article doesn't make clear what loss of connectivity would mean *beyond* "being able to manage your own energy consumption". Would the meters disconnect subscriber loads if communication was lost? Or, would it just complicate billing?

    Obviously, if everyone was suddenly disconnected from the grid, there would
    be panic. OTOH, if the provider had to dispatch an old fashioned "meter reader" I suspect customers would be far less concerned.

    [I worked on the design of a meter in the late 80's and we avoided the remote telemetry due to costs and the lack of an existing tariff that could be leveraged. At the time, reading a meter was worth "50p" so not a big driver
    of the design]


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin Brown@3:633/10 to All on Friday, November 13, 2026 10:47:28
    On 12/11/2026 20:45, Don Y wrote:
    On 11/12/2026 11:14 AM, Martin Brown wrote:
    I wouldn't underestimate their capabilities. After Stuxnet the
    Iranians will be looking to inflict equivalent damage on the West at
    some point.

    Yes, but why do *anything* publicly?ÿ What is the expected gain?
    Surely, citizens aren't going to cringe in fear at the prospect
    of not being able to purchase ice cream.

    Publicity for their cause assuming it was them...odd that they haven't
    so far claimed responsibility.

    So, "kicking someone in the knee" is their way of getting sympathy???

    I could understand it from a terror standpoint -- get people thinking about how vulnerable they are.ÿ But, I would think the bar would be a bit higher
    to get people to REALLY notice.

    My instinct is that it is low hanging fruit/proof of concept and attacks
    will scale up in severity and damage done. Today's Friday 13th Microsoft outage might even be the next example in the sequence.

    Crashing their corporate server(s) likely would have been far more consequential (had it actually been an adversarial action)

    Malware locking of corporate servers took out UK retail giant Marks &
    Spencer last year - their IT folk were on the ball and pulled the plug
    quickly to limit damage but they still lost ~œ300M in the ensuing mess.

    https://www.bbc.co.uk/news/articles/c0el31nqnpvo https://www.bbc.co.uk/news/articles/c93x16zkl9do

    Ransomeware is becoming big business in the blackhat community.

    It could equally well just be some modern script kiddies aided and
    abetted by an AI agent capable of mounting such an attack en masse.

    But, again, why freezers?ÿ Why not petrol pumps?ÿ Or, baby monitors?
    Or electronic doorbells?

    Is it just the lowest hanging fruit?ÿ Or, the first of a series of
    "waves" of vulnerability exploits?

    I think both of them at once. Freezers were so trivial that pretty much
    anyone could have done it even the old school script kiddies...
    I expect a more serious one against the UK National Grid (or the US
    equivalent) at some stage. Generation I "smart" meters were always a
    disaster waiting to happen - insecure as hell. Their only redeeming
    feature was that they turned into dumb meters by changing supplier and
    now the discontinuation of 2G/œG signal scuppers them completely.

    It is a real tale of woe - you couldn't make it up!!

    https://www.theregister.com/networks/2026/11/10/smart-meters-to-cost-the-uk- billions-2g-switch-off-means-replacing-12-13-million/5308728

    The article doesn't make clear what loss of connectivity would mean
    *beyond*
    "being able to manage your own energy consumption".ÿ Would the meters disconnect subscriber loads if communication was lost?ÿ Or, would it just complicate billing?


    The loss of comms makes them passive dumb meters that have to be read
    from time to time. They don't send meter readers any more unless they
    suspect you are ripping them off. The customer is expected to read their
    own meter. Mine is about 12' up in the air where mains enters the house
    and can only be read from a stepladder. It is Gen2 smartmeter so
    probably secure enough (although it is hard to be confident of that).

    The big problem with smart meters when they are fully smart is that it
    allows the supplier to do remote disconnection of the customer (eg for
    non payment of bill) without visiting the premises to pull the fuse.

    Imagine what would happen if a peak evening domestic premises load was thrashed on and off synchronously at say once per second...

    The security on generation 1 units was risible!

    Obviously, if everyone was suddenly disconnected from the grid, there would be panic.ÿ OTOH, if the provider had to dispatch an old fashioned "meter reader" I suspect customers would be far less concerned.

    The possibility to disconnect everyone with a smart meter from the grid
    is the threat, but it could also be done in such a way as to damage the
    grid itself (in much the same way as switching a filament light on and
    off many times in a short period causes it to blow).

    [I worked on the design of a meter in the late 80's and we avoided the remote
    telemetry due to costs and the lack of an existing tariff that could be leveraged.ÿ At the time, reading a meter was worth "50p" so not a big
    driver
    of the design]

    The latest generation of smart meters have two modules the mains hot
    high current side for measurement and then the comms link module which
    talks to the reporting network.

    Unfortunately it still doesn't work properly in the north of England and Scotland due to inadequate investment. They use two different methods of communications mobile phone network in the south and RF elsewhere.
    The latter does not work due to the north being hilly in parts!

    https://www.bbc.co.uk/news/articles/cq52382zd1no

    It really is a national embarrassment.

    --
    Martin Brown


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Friday, November 13, 2026 12:13:42
    On 2026-11-12 21:45, Don Y wrote:
    On 11/12/2026 11:14 AM, Martin Brown wrote:
    I wouldn't underestimate their capabilities. After Stuxnet the
    Iranians will be looking to inflict equivalent damage on the West at
    some point.

    Yes, but why do *anything* publicly?ÿ What is the expected gain?
    Surely, citizens aren't going to cringe in fear at the prospect
    of not being able to purchase ice cream.

    Publicity for their cause assuming it was them...odd that they haven't
    so far claimed responsibility.

    So, "kicking someone in the knee" is their way of getting sympathy???

    I could understand it from a terror standpoint -- get people thinking about how vulnerable they are.ÿ But, I would think the bar would be a bit higher
    to get people to REALLY notice.

    E.g., our local Costco (a large "warehouse club" store) suffered a power failure (some on-site equipment) and was out of service for a day or so.
    But, it was just an annoyance to most folks as they were open for business the next day.

    Crashing their corporate server(s) likely would have been far more consequential (had it actually been an adversarial action)

    It could equally well just be some modern script kiddies aided and
    abetted by an AI agent capable of mounting such an attack en masse.

    But, again, why freezers?ÿ Why not petrol pumps?ÿ Or, baby monitors?
    Or electronic doorbells?

    Because they (bad enough guys) found how to do it.


    Is it just the lowest hanging fruit?ÿ Or, the first of a series of
    "waves" of vulnerability exploits?

    Don't underestimate the number of people who rely on immediate
    delivery of food when they need it. Amazon Prime etc has created an
    expectation in the populous that you can have anything anytime you
    want it.

    I suspect "need" is an overstatement; maybe "want" (I doubt anyone will go hungry if they don't get their FROZEN food delivery, today)

    There are flats with no kitchen. Maybe a microwave to reheat packaged portions, or have the food ready to eat delivered from many restaurants
    just in time.



    And, the "response" doesn't likely involve many government resources.

    So, there doesn't seem to be any meaningful message (unless they
    thought their adversaries didn't expect them to have ANY cyber
    capabilities)

    I expect a more serious one against the UK National Grid (or the US
    equivalent) at some stage. Generation I "smart" meters were always a
    disaster waiting to happen - insecure as hell. Their only redeeming
    feature was that they turned into dumb meters by changing supplier and
    now the discontinuation of 2G/œG signal scuppers them completely.

    It is a real tale of woe - you couldn't make it up!!

    https://www.theregister.com/networks/2026/11/10/smart-meters-to-cost-
    the-uk- billions-2g-switch-off-means-replacing-12-13-million/5308728

    The article doesn't make clear what loss of connectivity would mean
    *beyond*
    "being able to manage your own energy consumption".ÿ Would the meters disconnect subscriber loads if communication was lost?ÿ Or, would it just complicate billing?

    Billing would be impossible.

    Maybe, they can send a meter-man to read them manually, going home by home.


    ®"Smart meters are already helping millions of consumers manage their
    energy and save money on bills," they told The Reg. "The transition to
    4G is a planned upgrade that will continue to deliver the benefits that
    smart meters already provide to households and industry."¯

    This is bollocks. It doesn't help me an iota (I'm in Spain, so not the
    same system). The only improvement I get is I get the invoice monthly
    instead of bimonthly.

    Yes, I can get detailed info, so what? Not actually useful.

    We can get billed for different prices at different hours. This is what
    they actually mean: you can shift your heavy usage to the hours when it
    is cheaper. If you ignore this, maybe you end paying a lot more, so not beneficial.


    Obviously, if everyone was suddenly disconnected from the grid, there would be panic.ÿ OTOH, if the provider had to dispatch an old fashioned "meter reader" I suspect customers would be far less concerned.

    [I worked on the design of a meter in the late 80's and we avoided the remote
    telemetry due to costs and the lack of an existing tariff that could be leveraged.ÿ At the time, reading a meter was worth "50p" so not a big
    driver
    of the design]


    In Spain, I think all electricity meters can be remotely read (and
    possibly programmed). But they don't use phones, they use a signal
    transported on the AC lines.

    My water meter was improved recently so that it can be read by a
    meter-man with a handheld reader, so probably using low power BT. It was
    also moved to be under the street public pavement, not inside my garden.

    Now they ordered that all gas meters be updated as well. They have some
    years, maybe a decade, to do it. And the monthly invoice will go up half
    an euro.


    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Liz Tuddenham@3:633/10 to All on Friday, November 13, 2026 17:57:33
    Martin Brown <'''newspam'''@nonad.co.uk> wrote:

    [...]
    The big problem with smart meters when they are fully smart is that it
    allows the supplier to do remote disconnection of the customer (eg for
    non payment of bill) without visiting the premises to pull the fuse.

    I don't think that is seen by the suppliers as a problem, I think it was
    the main reason for installing them. There was huge pressure in the UK
    to install them but it suddenly stopped when the Government made remote disconnection without due process illegal.


    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Friday, November 13, 2026 12:16:16
    On 11/13/2026 10:57 AM, Liz Tuddenham wrote:
    Martin Brown <'''newspam'''@nonad.co.uk> wrote:

    [...]
    The big problem with smart meters when they are fully smart is that it
    allows the supplier to do remote disconnection of the customer (eg for
    non payment of bill) without visiting the premises to pull the fuse.

    I don't think that is seen by the suppliers as a problem, I think it was
    the main reason for installing them. There was huge pressure in the UK
    to install them but it suddenly stopped when the Government made remote disconnection without due process illegal.
    An adversary likely doesn't abide by those rules. So, unless the meters
    have had that ability permanently disabled, it is still a rich attack surface.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Friday, November 13, 2026 12:29:55
    On 11/13/2026 4:13 AM, Carlos E.R. wrote:
    Crashing their corporate server(s) likely would have been far more
    consequential (had it actually been an adversarial action)

    It could equally well just be some modern script kiddies aided and abetted >>> by an AI agent capable of mounting such an attack en masse.

    But, again, why freezers?ÿ Why not petrol pumps?ÿ Or, baby monitors?
    Or electronic doorbells?

    Because they (bad enough guys) found how to do it.

    That suggests their toolkits aren't very deep; as if they "settled"
    for something instead of *targeted* something.

    Is it just the lowest hanging fruit?ÿ Or, the first of a series of
    "waves" of vulnerability exploits?

    Don't underestimate the number of people who rely on immediate delivery of >>> food when they need it. Amazon Prime etc has created an expectation in the >>> populous that you can have anything anytime you want it.

    I suspect "need" is an overstatement; maybe "want" (I doubt anyone will go >> hungry if they don't get their FROZEN food delivery, today)

    There are flats with no kitchen. Maybe a microwave to reheat packaged portions,
    or have the food ready to eat delivered from many restaurants just in time.

    I don't think that is the case, here -- except in dorm rooms or hotels.
    Most homes have a kitchen or kitchenette. (Most dorms likely have a
    hot plate, even if it is prohibited!).

    For the most part, frozen (here) tends to be convenience -- having access
    to something that is perishable or out-of-season or "quick" to prepare
    (having been pre-prepared prior to freezing)

    It is a real tale of woe - you couldn't make it up!!

    https://www.theregister.com/networks/2026/11/10/smart-meters-to-cost- the- >>> uk- billions-2g-switch-off-means-replacing-12-13-million/5308728

    The article doesn't make clear what loss of connectivity would mean *beyond* >> "being able to manage your own energy consumption".ÿ Would the meters
    disconnect subscriber loads if communication was lost?ÿ Or, would it just
    complicate billing?

    Billing would be impossible.

    But, that's a temporary glitch. Push comes to shove, an army of
    "meter readers" do it the old fashioned way. And/or, the subscribers
    are charged with doing it under fear that misreporting will just make
    the NEXT reading that much larger (more costly).

    Maybe, they can send a meter-man to read them manually, going home by home.

    Until a few years ago, someone walked the neighborhood monthly,
    glancing at the meter (mounted by the load center on the side of the house)
    and typed the reading into their datalogger. No doubt it had been
    preloaded with names and addresses in the order in which those residences
    would be encountered (so, the effort is little more than *walking*
    the area).

    I htink the newer meters are now remotely read.

    Water meters likelwise went through an upgrade; instead of lifting the
    (cast iron) curbside meter cover and noting the reading, an electronic transducer has been fitted (along with new metering technology to
    reduce error rates). But, I think those are read by a vehicle
    driving through the neighborhood.

    That may also be the case for the electric meters.
    ®"Smart meters are already helping millions of consumers manage their energy and save money on bills," they told The Reg. "The transition to 4G is a planned
    upgrade that will continue to deliver the benefits that smart meters already provide to households and industry."¯

    This is bollocks. It doesn't help me an iota (I'm in Spain, so not the same system). The only improvement I get is I get the invoice monthly instead of bimonthly.

    Yes, I can get detailed info, so what? Not actually useful.

    I think it would depend on your tariff structure. E.g., ToU tariffs
    encourage the subscriber to "manually" shift their loads to off-peak hours.
    In reality, there isn't much of a savings in doing so -- but, there is a
    big penalty for NOT doing so!

    [One of the dirty little secrets about solar, here, is you end up
    on a ToU tariff. Particularly damaging if your array can't keep up
    with your demand during peak hours!]

    We can get billed for different prices at different hours. This is what they actually mean: you can shift your heavy usage to the hours when it is cheaper.
    If you ignore this, maybe you end paying a lot more, so not beneficial.

    Many appliances include hooks for this, now. Some regions of the
    country had tariffs where the provider could "control" those
    loads (in times of peak demand) in exchange for some "con$ideration".

    Obviously, if everyone was suddenly disconnected from the grid, there would >> be panic.ÿ OTOH, if the provider had to dispatch an old fashioned "meter
    reader" I suspect customers would be far less concerned.

    [I worked on the design of a meter in the late 80's and we avoided the remote
    telemetry due to costs and the lack of an existing tariff that could be
    leveraged.ÿ At the time, reading a meter was worth "50p" so not a big driver >> of the design]

    In Spain, I think all electricity meters can be remotely read (and possibly programmed). But they don't use phones, they use a signal transported on the AC
    lines.

    Interfering with reading would just annoy the providers. To make a
    real impact, you would need to annoy the *subscribers* -- disconnect their service!

    My water meter was improved recently so that it can be read by a meter-man with
    a handheld reader, so probably using low power BT. It was also moved to be under the street public pavement, not inside my garden.

    Now they ordered that all gas meters be updated as well. They have some years,
    maybe a decade, to do it. And the monthly invoice will go up half an euro.
    Isn't it interesting how THEY save labor costs and YOU pay more?

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Liz Tuddenham@3:633/10 to All on Friday, November 13, 2026 20:29:10
    Don Y <blockedofcourse@foo.invalid> wrote:

    On 11/13/2026 10:57 AM, Liz Tuddenham wrote:
    Martin Brown <'''newspam'''@nonad.co.uk> wrote:

    [...]
    The big problem with smart meters when they are fully smart is that it
    allows the supplier to do remote disconnection of the customer (eg for
    non payment of bill) without visiting the premises to pull the fuse.

    I don't think that is seen by the suppliers as a problem, I think it was the main reason for installing them. There was huge pressure in the UK
    to install them but it suddenly stopped when the Government made remote disconnection without due process illegal.
    An adversary likely doesn't abide by those rules. So, unless the meters
    have had that ability permanently disabled, it is still a rich attack surface.

    Definitely.

    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Friday, November 13, 2026 21:47:45
    On 2026-11-13 20:29, Don Y wrote:
    On 11/13/2026 4:13 AM, Carlos E.R. wrote:
    Crashing their corporate server(s) likely would have been far more
    consequential (had it actually been an adversarial action)

    It could equally well just be some modern script kiddies aided and
    abetted by an AI agent capable of mounting such an attack en masse.

    But, again, why freezers?ÿ Why not petrol pumps?ÿ Or, baby monitors?
    Or electronic doorbells?

    Because they (bad enough guys) found how to do it.

    That suggests their toolkits aren't very deep; as if they "settled"
    for something instead of *targeted* something.

    Give them time.


    Is it just the lowest hanging fruit?ÿ Or, the first of a series of
    "waves" of vulnerability exploits?

    Don't underestimate the number of people who rely on immediate
    delivery of food when they need it. Amazon Prime etc has created an
    expectation in the populous that you can have anything anytime you
    want it.

    I suspect "need" is an overstatement; maybe "want" (I doubt anyone
    will go
    hungry if they don't get their FROZEN food delivery, today)

    There are flats with no kitchen. Maybe a microwave to reheat packaged
    portions, or have the food ready to eat delivered from many
    restaurants just in time.

    I don't think that is the case, here -- except in dorm rooms or hotels.
    Most homes have a kitchen or kitchenette.ÿ (Most dorms likely have a
    hot plate, even if it is prohibited!).

    Google says they are common in Thailand. It also says they exist in
    Spain and USA.

    Sources:

    <https://agnetwest.com/no-kitchens-future-homes/>

    No Kitchens in Future Homes?

    December 11, 2023This Land of Ours

    Will our future homes be built without kitchens? That?s coming up on
    This Land of Ours.


    <https://metropolismag.com/projects/anna-puigjaner-kitchenless-home/>

    This Spanish Architect Wants to Revolutionize the Home?by Getting Rid of Kitchens

    Few spaces of the home are as coveted as the kitchen. But Anna Puigjaner
    is showing the way out of these wasteful private cooking boxes toward
    more efficient ?shared? alternatives.


    <https://www.treehugger.com/alice-constance-austin-houses-without-kitchens-5201804>

    Alice Constance Austin Designed Houses Without Kitchens in 1917

    An underground electric railway delivered food from central kitchens to
    each house.


    <https://en.wikipedia.org/wiki/Single-kitchen_home>

    Single-kitchen home

    The single-kitchen home was a reform model of urban residential
    development in which a centrally managed canteen kitchen within a
    multi-party house replaced the kitchens of the individual apartments.
    The concept was based on the ideas of the women's rights activist and
    social democrat Lily Braun. With the basic idea of liberating women from housework, at the beginning of the 20th century it was an explicit counter-design to the establishment of the isolated nuclear family in
    mass housing. Single-kitchen houses, sometimes also called central
    kitchen houses, were implemented in various European large cities in
    isolated and different ways until the 1950s. As key works of an idea of
    modern living, some of these buildings were nominated for the European Heritage Label in 2009, expressly as a network of common European
    architecture spread across various countries.


    For the most part, frozen (here) tends to be convenience -- having access
    to something that is perishable or out-of-season or "quick" to prepare (having been pre-prepared prior to freezing)

    It is a real tale of woe - you couldn't make it up!!

    https://www.theregister.com/networks/2026/11/10/smart-meters-to-
    cost- the- uk- billions-2g-switch-off-means-replacing-12-13-
    million/5308728

    The article doesn't make clear what loss of connectivity would mean
    *beyond*
    "being able to manage your own energy consumption".ÿ Would the meters
    disconnect subscriber loads if communication was lost?ÿ Or, would it
    just
    complicate billing?

    Billing would be impossible.

    But, that's a temporary glitch.ÿ Push comes to shove, an army of
    "meter readers" do it the old fashioned way.ÿ And/or, the subscribers
    are charged with doing it under fear that misreporting will just make
    the NEXT reading that much larger (more costly).

    Maybe, they can send a meter-man to read them manually, going home by
    home.

    Until a few years ago, someone walked the neighborhood monthly,
    glancing at the meter (mounted by the load center on the side of the house) and typed the reading into their datalogger.ÿ No doubt it had been
    preloaded with names and addresses in the order in which those residences would be encountered (so, the effort is little more than *walking*
    the area).

    They wanted to get rid of those few salaries, and possibly, the read errors.



    I htink the newer meters are now remotely read.

    Water meters likelwise went through an upgrade; instead of lifting the
    (cast iron) curbside meter cover and noting the reading, an electronic transducer has been fitted (along with new metering technology to
    reduce error rates).ÿ But, I think those are read by a vehicle
    driving through the neighborhood.


    I just asked google, and it says there is a mix. Some have a low power
    remote system that can be read centrally, using NB-IoT o LoRaWAN.

    Some are read from a vehicle, which can even be the garbage collection
    truck with a receiver. Some are read by a man that passes walking.

    Then Google offered to tell me what they use in my city. Those installed recently are read centrally, narrowband technology. Zones of the city
    that were installed some years ago, are walk-by or drive-by.



    That may also be the case for the electric meters.
    ®"Smart meters are already helping millions of consumers manage their
    energy and save money on bills," they told The Reg. "The transition to
    4G is a planned upgrade that will continue to deliver the benefits
    that smart meters already provide to households and industry."¯

    This is bollocks. It doesn't help me an iota (I'm in Spain, so not the
    same system). The only improvement I get is I get the invoice monthly
    instead of bimonthly.

    Yes, I can get detailed info, so what? Not actually useful.

    I think it would depend on your tariff structure.ÿ E.g., ToU tariffs encourage the subscriber to "manually" shift their loads to off-peak hours. In reality, there isn't much of a savings in doing so -- but, there is a
    big penalty for NOT doing so!

    [One of the dirty little secrets about solar, here, is you end up
    on a ToU tariff.ÿ Particularly damaging if your array can't keep up
    with your demand during peak hours!]

    We can get billed for different prices at different hours. This is
    what they actually mean: you can shift your heavy usage to the hours
    when it is cheaper. If you ignore this, maybe you end paying a lot
    more, so not beneficial.

    Many appliances include hooks for this, now.ÿ Some regions of the
    country had tariffs where the provider could "control" those
    loads (in times of peak demand) in exchange for some "con$ideration".

    Obviously, if everyone was suddenly disconnected from the grid, there
    would
    be panic.ÿ OTOH, if the provider had to dispatch an old fashioned "meter >>> reader" I suspect customers would be far less concerned.

    [I worked on the design of a meter in the late 80's and we avoided
    the remote
    telemetry due to costs and the lack of an existing tariff that could be
    leveraged.ÿ At the time, reading a meter was worth "50p" so not a big
    driver
    of the design]

    In Spain, I think all electricity meters can be remotely read (and
    possibly programmed). But they don't use phones, they use a signal
    transported on the AC lines.

    Interfering with reading would just annoy the providers.ÿ To make a
    real impact, you would need to annoy the *subscribers* -- disconnect their service!

    My water meter was improved recently so that it can be read by a
    meter-man with a handheld reader, so probably using low power BT. It
    was also moved to be under the street public pavement, not inside my
    garden.

    Now they ordered that all gas meters be updated as well. They have
    some years, maybe a decade, to do it. And the monthly invoice will go
    up half an euro.
    Isn't it interesting how THEY save labor costs and YOU pay more?

    Indeed!

    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Friday, November 13, 2026 20:56:14
    On 11/13/2026 3:47 AM, Martin Brown wrote:
    On 12/11/2026 20:45, Don Y wrote:
    On 11/12/2026 11:14 AM, Martin Brown wrote:
    I wouldn't underestimate their capabilities. After Stuxnet the Iranians >>>>> will be looking to inflict equivalent damage on the West at some point. >>>>
    Yes, but why do *anything* publicly?ÿ What is the expected gain?
    Surely, citizens aren't going to cringe in fear at the prospect
    of not being able to purchase ice cream.

    Publicity for their cause assuming it was them...odd that they haven't so >>> far claimed responsibility.

    So, "kicking someone in the knee" is their way of getting sympathy???

    I could understand it from a terror standpoint -- get people thinking about >> how vulnerable they are.ÿ But, I would think the bar would be a bit higher >> to get people to REALLY notice.

    My instinct is that it is low hanging fruit/proof of concept and attacks will
    scale up in severity and damage done. Today's Friday 13th Microsoft outage might even be the next example in the sequence.

    Maybe air traffic control systems?

    Crashing their corporate server(s) likely would have been far more
    consequential (had it actually been an adversarial action)

    Malware locking of corporate servers took out UK retail giant Marks & Spencer
    last year - their IT folk were on the ball and pulled the plug quickly to limit
    damage but they still lost ~œ300M in the ensuing mess.

    https://www.bbc.co.uk/news/articles/c0el31nqnpvo https://www.bbc.co.uk/news/articles/c93x16zkl9do

    Ransomeware is becoming big business in the blackhat community.

    Yes, but that has to target individual entities. And, has an
    easily understood motive (money).

    No one demanded a ransom for freezer-gate. It's like the early days
    of malware where the goal was just to poke you in the eye.

    It could equally well just be some modern script kiddies aided and abetted >>> by an AI agent capable of mounting such an attack en masse.

    But, again, why freezers?ÿ Why not petrol pumps?ÿ Or, baby monitors?
    Or electronic doorbells?

    Is it just the lowest hanging fruit?ÿ Or, the first of a series of
    "waves" of vulnerability exploits?

    I think both of them at once. Freezers were so trivial that pretty much anyone
    could have done it even the old school script kiddies...

    We'll see. It has value in that it makes it clear to "people in charge"
    (and "people with stakes") that they are vulnerable. But, in most cases, people seem to think it will never be "them".

    I had a laughable discussion with my MD about the security of their IT systems: "Oh, we have a really GOOD staff!" (Wow, are you THAT naive to think the BEST folks are working for you and not banks, tech companies, etc.?)

    This, despite one of the imaging companies, here, repeatedly being hacked.
    (I guess they must not hire "really GOOD staff"?)

    The article doesn't make clear what loss of connectivity would mean *beyond* >> "being able to manage your own energy consumption".ÿ Would the meters
    disconnect subscriber loads if communication was lost?ÿ Or, would it just
    complicate billing?

    The loss of comms makes them passive dumb meters that have to be read from time
    to time. They don't send meter readers any more unless they suspect you are ripping them off. The customer is expected to read their own meter. Mine is about 12' up in the air where mains enters the house and can only be read from
    a stepladder. It is Gen2 smartmeter so probably secure enough (although it is
    hard to be confident of that).

    In the past, ours were read semiregularly. "Estimated" if not read.
    And, from time to time, WE were asked to read it (just draw the
    positions of the indicators on the dials and THEY would interpret).

    I think there is some legislative requirement that they have to
    actually read them periodically to ensure fairness in billing.

    Meters (gas, electric, water) tend to be in varying locations and
    some folks have theirs in "secured" areas. So, reading can be
    costly for a human reader (who has to gain entry to those areas)

    The big problem with smart meters when they are fully smart is that it allows
    the supplier to do remote disconnection of the customer (eg for non payment of
    bill) without visiting the premises to pull the fuse.

    When I was designing meter, the disconnect feature was too costly
    to implement (100A+ on two conductors). The meter itself is the
    "fuse" so it is removed when service is disconnected. A locking
    ring holds the meter to the mating socket and the meter is replaced by
    a blank cover (to protect from the bare line contacts) when it
    is removed -- still secured by said ring)

    Imagine what would happen if a peak evening domestic premises load was thrashed
    on and off synchronously at say once per second...

    I would question whether or not they could affect such control
    over that many loads at that rate. It would seem an overprovisioned communication channel if such a "rare" event could be signalled
    that often.

    The security on generation 1 units was risible!

    But that's true of most electronic devices. Security is most often
    an afterthought.

    Connectivity, decades ago, was largely point-to-point (serial ports,
    HDLC, etc.) So, getting physical access to the "conductor" was
    often a high enough hurdle.

    Now, people put NICs in damn near everything, never thinking that
    THEIR device would ever be hacked ("Who would want to hack a
    'scope?" Ans: someone who wants to hack something ELSE in
    that lab!)

    [I worked on the design of a meter in the late 80's and we avoided the remote
    telemetry due to costs and the lack of an existing tariff that could be
    leveraged.ÿ At the time, reading a meter was worth "50p" so not a big driver >> of the design]

    The latest generation of smart meters have two modules the mains hot high current side for measurement and then the comms link module which talks to the
    reporting network.

    Unfortunately it still doesn't work properly in the north of England and Scotland due to inadequate investment. They use two different methods of communications mobile phone network in the south and RF elsewhere.
    The latter does not work due to the north being hilly in parts!

    https://www.bbc.co.uk/news/articles/cq52382zd1no

    It really is a national embarrassment.

    Shoot the engineer? Or, the clown who specified the system??


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Saturday, November 14, 2026 01:18:10
    On 11/13/2026 1:47 PM, Carlos E.R. wrote:

    I suspect "need" is an overstatement; maybe "want" (I doubt anyone will go >>>> hungry if they don't get their FROZEN food delivery, today)

    There are flats with no kitchen. Maybe a microwave to reheat packaged
    portions, or have the food ready to eat delivered from many restaurants just
    in time.

    I don't think that is the case, here -- except in dorm rooms or hotels.
    Most homes have a kitchen or kitchenette.ÿ (Most dorms likely have a
    hot plate, even if it is prohibited!).

    Google says they are common in Thailand. It also says they exist in Spain and USA.

    Sources:

    <https://agnetwest.com/no-kitchens-future-homes/>

    No Kitchens in Future Homes?

    December 11, 2023This Land of Ours

    Will our future homes be built without kitchens? That?s coming up on This Land
    of Ours.


    <https://metropolismag.com/projects/anna-puigjaner-kitchenless-home/>

    This Spanish Architect Wants to Revolutionize the Home?by Getting Rid of Kitchens

    Few spaces of the home are as coveted as the kitchen. But Anna Puigjaner is showing the way out of these wasteful private cooking boxes toward more efficient ?shared? alternatives.


    <https://www.treehugger.com/alice-constance-austin-houses-without- kitchens-5201804>

    Alice Constance Austin Designed Houses Without Kitchens in 1917

    An underground electric railway delivered food from central kitchens to each house.


    <https://en.wikipedia.org/wiki/Single-kitchen_home>

    Single-kitchen home

    The single-kitchen home was a reform model of urban residential development in
    which a centrally managed canteen kitchen within a multi-party house replaced
    the kitchens of the individual apartments. The concept was based on the ideas
    of the women's rights activist and social democrat Lily Braun. With the basic
    idea of liberating women from housework, at the beginning of the 20th century
    it was an explicit counter-design to the establishment of the isolated nuclear
    family in mass housing. Single-kitchen houses, sometimes also called central kitchen houses, were implemented in various European large cities in isolated
    and different ways until the 1950s. As key works of an idea of modern living,
    some of these buildings were nominated for the European Heritage Label in 2009,
    expressly as a network of common European architecture spread across various countries.
    I think there would be a lot of resistance to that, here. Kitchens
    are one of the most "gifted" rooms in a home -- appliances, gadgets,
    etc.

    You will still end up with some sort of place to store foodstuffs and
    the means to eat them (and some limited means of preparing them).
    Hard to imagine refrigerators, freezers, ice makers, etc. going away.

    And, with young people struggling to *afford* a home, it's hard
    to believe they would "dine out" at a higher price vs. prepping
    their own meals. E.g., a purchased $15 burger is a bit
    excessive if you can't make your mortgage payment!

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin Brown@3:633/10 to All on Saturday, November 14, 2026 13:47:39
    On 14/11/2026 03:56, Don Y wrote:
    On 11/13/2026 3:47 AM, Martin Brown wrote:
    On 12/11/2026 20:45, Don Y wrote:
    On 11/12/2026 11:14 AM, Martin Brown wrote:
    I wouldn't underestimate their capabilities. After Stuxnet the
    Iranians will be looking to inflict equivalent damage on the West >>>>>> at some point.

    Yes, but why do *anything* publicly?ÿ What is the expected gain?
    Surely, citizens aren't going to cringe in fear at the prospect
    of not being able to purchase ice cream.

    Publicity for their cause assuming it was them...odd that they
    haven't so far claimed responsibility.

    So, "kicking someone in the knee" is their way of getting sympathy???

    I could understand it from a terror standpoint -- get people thinking
    about
    how vulnerable they are.ÿ But, I would think the bar would be a bit
    higher
    to get people to REALLY notice.

    My instinct is that it is low hanging fruit/proof of concept and
    attacks will scale up in severity and damage done. Today's Friday 13th
    Microsoft outage might even be the next example in the sequence.

    Maybe air traffic control systems?

    That appears to be a coincidence and a manifestation of the pay peanuts
    get monkeys problem.

    Crashing their corporate server(s) likely would have been far more
    consequential (had it actually been an adversarial action)

    Malware locking of corporate servers took out UK retail giant Marks &
    Spencer last year - their IT folk were on the ball and pulled the plug
    quickly to limit damage but they still lost ~œ300M in the ensuing mess.

    https://www.bbc.co.uk/news/articles/c0el31nqnpvo
    https://www.bbc.co.uk/news/articles/c93x16zkl9do

    Ransomeware is becoming big business in the blackhat community.

    Yes, but that has to target individual entities.ÿ And, has an
    easily understood motive (money).

    No one demanded a ransom for freezer-gate.ÿ It's like the early days
    of malware where the goal was just to poke you in the eye.

    Indeed. It effectively launched the third party AV industry.

    It could equally well just be some modern script kiddies aided and
    abetted by an AI agent capable of mounting such an attack en masse.

    But, again, why freezers?ÿ Why not petrol pumps?ÿ Or, baby monitors?
    Or electronic doorbells?

    Is it just the lowest hanging fruit?ÿ Or, the first of a series of
    "waves" of vulnerability exploits?

    I think both of them at once. Freezers were so trivial that pretty
    much anyone could have done it even the old school script kiddies...

    We'll see.ÿ It has value in that it makes it clear to "people in charge"
    (and "people with stakes") that they are vulnerable.ÿ But, in most cases, people seem to think it will never be "them".

    I had a laughable discussion with my MD about the security of their IT systems:
    "Oh, we have a really GOOD staff!"ÿ (Wow, are you THAT naive to think
    the BEST
    folks are working for you and not banks, tech companies, etc.?)

    Have you seen the North Korean "FaceStealer" one that uses an AI fake
    zoom meeting with someone senior and known to you to get enough video to
    fake you to someone else? It is making the news in Japan at the moment
    and several fairly high profile cyber experts have fallen for it.

    https://www3.nhk.or.jp/nhkworld/news/20261113de75641/

    About $400M stolen so far and its still running.

    This, despite one of the imaging companies, here, repeatedly being hacked.
    (I guess they must not hire "really GOOD staff"?)

    It is remarkably easy to get hacked if the workplace culture isn't
    right. I allowed a whole day for delousing our Korean office every trip.

    The article doesn't make clear what loss of connectivity would mean
    *beyond*
    "being able to manage your own energy consumption".ÿ Would the meters
    disconnect subscriber loads if communication was lost?ÿ Or, would it
    just
    complicate billing?

    The loss of comms makes them passive dumb meters that have to be read
    from time to time. They don't send meter readers any more unless they
    suspect you are ripping them off. The customer is expected to read
    their own meter. Mine is about 12' up in the air where mains enters
    the house and can only be read from a stepladder. It is Gen2
    smartmeter so probably secure enough (although it is hard to be
    confident of that).

    In the past, ours were read semiregularly.ÿ "Estimated" if not read.
    And, from time to time, WE were asked to read it (just draw the
    positions of the indicators on the dials and THEY would interpret).

    I think there is some legislative requirement that they have to
    actually read them periodically to ensure fairness in billing.

    You still have dials on the meters? Electromechanical ones have been
    long gone here. Mine even wrapped around before it was replaced.

    Meters (gas, electric, water) tend to be in varying locations and
    some folks have theirs in "secured" areas.ÿ So, reading can be
    costly for a human reader (who has to gain entry to those areas)

    We have somewhat insane water and sewerage arrangements where I live
    being on the cusp of a watershed. Water comes to us from Northumbria (essentially limitless supply) but sewage goes to Yorkshire.

    The upshot is the Yorkshire Water can never find the incoming water
    meter which belongs to Northumbria and so do crazy estimates!

    The big problem with smart meters when they are fully smart is that it
    allows the supplier to do remote disconnection of the customer (eg for
    non payment of bill) without visiting the premises to pull the fuse.

    When I was designing meter, the disconnect feature was too costly
    to implement (100A+ on two conductors).ÿ The meter itself is the
    "fuse" so it is removed when service is disconnected.ÿ A locking
    ring holds the meter to the mating socket and the meter is replaced by
    a blank cover (to protect from the bare line contacts) when it
    is removed -- still secured by said ring)

    There is a separate 100/80/60A fuse on live of a UK domestic 240v installation. Most towns and cities are three phase, my village is only
    two opposite phases and neutral which isn't common any more. >
    Imagine what would happen if a peak evening domestic premises load was
    thrashed on and off synchronously at say once per second...

    I would question whether or not they could affect such control
    over that many loads at that rate.ÿ It would seem an overprovisioned communication channel if such a "rare" event could be signalled
    that often.

    I don't know what it is capable of - the specification is unclear.

    The security on generation 1 units was risible!

    But that's true of most electronic devices.ÿ Security is most often
    an afterthought.

    Connectivity, decades ago, was largely point-to-point (serial ports,
    HDLC, etc.)ÿ So, getting physical access to the "conductor" was
    often a high enough hurdle.

    They were rolled out late enough that it should have been obvious that
    they needed to be secure (but weren't). Doing something to roll them out immediately was seen as far more important than doing the right thing.


    Now, people put NICs in damn near everything, never thinking that
    THEIR device would ever be hacked ("Who would want to hack a
    'scope?"ÿ Ans:ÿ someone who wants to hack something ELSE in
    that lab!)

    I was amusing to find a Wifi chipset in my microwave oven when the
    service engineer had it in bits.

    [I worked on the design of a meter in the late 80's and we avoided
    the remote
    telemetry due to costs and the lack of an existing tariff that could be
    leveraged.ÿ At the time, reading a meter was worth "50p" so not a big
    driver
    of the design]

    The latest generation of smart meters have two modules the mains hot
    high current side for measurement and then the comms link module which
    talks to the reporting network.

    Unfortunately it still doesn't work properly in the north of England
    and Scotland due to inadequate investment. They use two different
    methods of communications mobile phone network in the south and RF
    elsewhere.
    The latter does not work due to the north being hilly in parts!

    https://www.bbc.co.uk/news/articles/cq52382zd1no

    It really is a national embarrassment.

    Shoot the engineer?ÿ Or, the clown who specified the system??

    I expect the engineers knew perfectly well that it wouldn't work but
    were overruled by the bean counters and the management suits.


    --
    Martin Brown


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Saturday, November 14, 2026 11:19:17
    On 11/14/2026 6:47 AM, Martin Brown wrote:
    I could understand it from a terror standpoint -- get people thinking about
    how vulnerable they are.ÿ But, I would think the bar would be a bit higher >>>> to get people to REALLY notice.

    My instinct is that it is low hanging fruit/proof of concept and attacks >>> will scale up in severity and damage done. Today's Friday 13th Microsoft >>> outage might even be the next example in the sequence.

    Maybe air traffic control systems?

    That appears to be a coincidence and a manifestation of the pay peanuts get monkeys problem.

    Yes, I was being facetious.

    Yes, but that has to target individual entities.ÿ And, has an
    easily understood motive (money).

    No one demanded a ransom for freezer-gate.ÿ It's like the early days
    of malware where the goal was just to poke you in the eye.

    Indeed. It effectively launched the third party AV industry.

    It was reminiscent of college hacks -- things done just to prove they
    could be done (but with no real merit).

    We'll see.ÿ It has value in that it makes it clear to "people in charge"
    (and "people with stakes") that they are vulnerable.ÿ But, in most cases,
    people seem to think it will never be "them".

    I had a laughable discussion with my MD about the security of their IT systems:
    "Oh, we have a really GOOD staff!"ÿ (Wow, are you THAT naive to think the BEST
    folks are working for you and not banks, tech companies, etc.?)

    Have you seen the North Korean "FaceStealer" one that uses an AI fake zoom meeting with someone senior and known to you to get enough video to fake you to
    someone else? It is making the news in Japan at the moment and several fairly
    high profile cyber experts have fallen for it.

    https://www3.nhk.or.jp/nhkworld/news/20261113de75641/

    About $400M stolen so far and its still running.

    I am careful about "distributing" any biometrics. When interacting with
    IVR systems, I use the "numeric keypad" option instead of voice. And,
    when voice MUST be used (complex queries), I distort the fundamental
    and add creakiness.

    If the system can't cope with me, then a human is dragged into the mix.

    [Of course, there is nothing to prevent them from capturing audio
    during THAT transaction -- I capture the audio in all phone transactions
    and post process it to refine diarisation, identification and recognition algorithms (why not? it's free data and you already "know" the results!)]


    This, despite one of the imaging companies, here, repeatedly being hacked. >> (I guess they must not hire "really GOOD staff"?)

    It is remarkably easy to get hacked if the workplace culture isn't right. I allowed a whole day for delousing our Korean office every trip.

    Because there is no value placed on it and no consequence (to the organization with lax security). Send each victim a check for $1000 and you can bet your ass the number and breadth of breeches will drop overnight!

    [First question to ask yourself: why are you collecting this information? Second question: why does anyone have access to it, directly? I.e., if you want to verify my identity, take information from me, now, and let a machine validate it without disclosing the correct information to anyone -- go/no-go]

    In the past, ours were read semiregularly.ÿ "Estimated" if not read.
    And, from time to time, WE were asked to read it (just draw the
    positions of the indicators on the dials and THEY would interpret).

    I think there is some legislative requirement that they have to
    actually read them periodically to ensure fairness in billing.

    You still have dials on the meters? Electromechanical ones have been long gone
    here. Mine even wrapped around before it was replaced.

    The electric and water meters are all digital but the gas still has
    dials (in addition to the "digital interface". The industry supported
    an add-on option that allowed old meters to be upgraded to have that
    capability without a total meter replacement.
    Meters (gas, electric, water) tend to be in varying locations and
    some folks have theirs in "secured" areas.ÿ So, reading can be
    costly for a human reader (who has to gain entry to those areas)

    We have somewhat insane water and sewerage arrangements where I live being on
    the cusp of a watershed. Water comes to us from Northumbria (essentially limitless supply) but sewage goes to Yorkshire.

    The upshot is the Yorkshire Water can never find the incoming water meter which
    belongs to Northumbria and so do crazy estimates!

    Some parts of town (those with alleys) locate the meters outside the
    property where they can be accessed more easily. It always looks
    incredibly "vulnerable" to look down an alley and just see one meter
    after another, each *hidden* (by a property wall/fence) from the
    customer to which it is associated.

    The big problem with smart meters when they are fully smart is that it
    allows the supplier to do remote disconnection of the customer (eg for non >>> payment of bill) without visiting the premises to pull the fuse.

    When I was designing meter, the disconnect feature was too costly
    to implement (100A+ on two conductors).ÿ The meter itself is the
    "fuse" so it is removed when service is disconnected.ÿ A locking
    ring holds the meter to the mating socket and the meter is replaced by
    a blank cover (to protect from the bare line contacts) when it
    is removed -- still secured by said ring)

    There is a separate 100/80/60A fuse on live of a UK domestic 240v installation.
    Most towns and cities are three phase, my village is only two opposite phases
    and neutral which isn't common any more. >

    The meter is the first "thing" the utility encounters. Downstream from
    it is usually a main disconnect which interrupts the power (both legs)
    to the individual branch circuits fed from the breaker panel.

    I.e., the line side of the meter is not interrupted between that
    point and the distribution transformer. Working on the meter base
    requires a licensed electrician as you are interfacing to assets
    owned by the utility.

    Imagine what would happen if a peak evening domestic premises load was
    thrashed on and off synchronously at say once per second...

    I would question whether or not they could affect such control
    over that many loads at that rate.ÿ It would seem an overprovisioned
    communication channel if such a "rare" event could be signalled
    that often.

    I don't know what it is capable of - the specification is unclear.

    If designing such a mechanism, *I* would make such a "rare event"
    difficult to initiate, especially because of its high value.

    "Are you sure you want to do this?"

    "Are you REALLY sure?"

    "Are you REALLY REALLY sure??"

    The security on generation 1 units was risible!

    But that's true of most electronic devices.ÿ Security is most often
    an afterthought.

    Connectivity, decades ago, was largely point-to-point (serial ports,
    HDLC, etc.)ÿ So, getting physical access to the "conductor" was
    often a high enough hurdle.

    They were rolled out late enough that it should have been obvious that they needed to be secure (but weren't). Doing something to roll them out immediately
    was seen as far more important than doing the right thing.

    No doubt politicians involved in the tomfoolery.

    Now, people put NICs in damn near everything, never thinking that
    THEIR device would ever be hacked ("Who would want to hack a
    'scope?"ÿ Ans:ÿ someone who wants to hack something ELSE in
    that lab!)

    I was amusing to find a Wifi chipset in my microwave oven when the service engineer had it in bits.

    The hardware is now too trivial and inexpensive. Too much of an incentive to include it "just in case" (and upgrade the software, later).

    I don't see the need for remote *control* of devices -- though see value in remote *monitoring* of them.

    Unfortunately it still doesn't work properly in the north of England and >>> Scotland due to inadequate investment. They use two different methods of >>> communications mobile phone network in the south and RF elsewhere.
    The latter does not work due to the north being hilly in parts!

    https://www.bbc.co.uk/news/articles/cq52382zd1no

    It really is a national embarrassment.

    Shoot the engineer?ÿ Or, the clown who specified the system??

    I expect the engineers knew perfectly well that it wouldn't work but were overruled by the bean counters and the management suits.
    My limited experience with british culture suggests the higher ups
    wouldn't take kindly to being "told" they were wrong (it isn't
    encouraged in the US but it seems to be better tolerated, here)

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Saturday, November 14, 2026 20:56:52
    On 2026-11-14 09:18, Don Y wrote:
    On 11/13/2026 1:47 PM, Carlos E.R. wrote:

    I suspect "need" is an overstatement; maybe "want" (I doubt anyone
    will go
    hungry if they don't get their FROZEN food delivery, today)

    There are flats with no kitchen. Maybe a microwave to reheat
    packaged portions, or have the food ready to eat delivered from many
    restaurants just in time.

    I don't think that is the case, here -- except in dorm rooms or hotels.
    Most homes have a kitchen or kitchenette.ÿ (Most dorms likely have a
    hot plate, even if it is prohibited!).

    Google says they are common in Thailand. It also says they exist in
    Spain and USA.

    Sources:

    <https://agnetwest.com/no-kitchens-future-homes/>

    No Kitchens in Future Homes?

    December 11, 2023This Land of Ours

    Will our future homes be built without kitchens? That?s coming up on
    This Land of Ours.


    <https://metropolismag.com/projects/anna-puigjaner-kitchenless-home/>

    This Spanish Architect Wants to Revolutionize the Home?by Getting Rid
    of Kitchens

    Few spaces of the home are as coveted as the kitchen. But Anna
    Puigjaner is showing the way out of these wasteful private cooking
    boxes toward more efficient ?shared? alternatives.


    <https://www.treehugger.com/alice-constance-austin-houses-without-
    kitchens-5201804>

    Alice Constance Austin Designed Houses Without Kitchens in 1917

    An underground electric railway delivered food from central kitchens
    to each house.


    <https://en.wikipedia.org/wiki/Single-kitchen_home>

    Single-kitchen home

    The single-kitchen home was a reform model of urban residential
    development in which a centrally managed canteen kitchen within a
    multi-party house replaced the kitchens of the individual apartments.
    The concept was based on the ideas of the women's rights activist and
    social democrat Lily Braun. With the basic idea of liberating women
    from housework, at the beginning of the 20th century it was an
    explicit counter-design to the establishment of the isolated nuclear
    family in mass housing. Single-kitchen houses, sometimes also called
    central kitchen houses, were implemented in various European large
    cities in isolated and different ways until the 1950s. As key works of
    an idea of modern living, some of these buildings were nominated for
    the European Heritage Label in 2009, expressly as a network of common
    European architecture spread across various countries.
    I think there would be a lot of resistance to that, here.ÿ Kitchens
    are one of the most "gifted" rooms in a home -- appliances, gadgets,
    etc.

    You will still end up with some sort of place to store foodstuffs and
    the means to eat them (and some limited means of preparing them).
    Hard to imagine refrigerators, freezers, ice makers, etc. going away.

    And, with young people struggling to *afford* a home, it's hard
    to believe they would "dine out" at a higher price vs. prepping
    their own meals.ÿ E.g., a purchased $15 burger is a bit
    excessive if you can't make your mortgage payment!


    A comunal kitchen that prepares the same dinner for everybody, is
    cheaper than 20 kitchens with their food stores.

    Frozen food or ready to eat packages are not that expensive.

    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Saturday, November 14, 2026 21:59:49
    On 2026-11-14 04:56, Don Y wrote:
    The big problem with smart meters when they are fully smart is that it
    allows the supplier to do remote disconnection of the customer (eg for
    non payment of bill) without visiting the premises to pull the fuse.

    When I was designing meter, the disconnect feature was too costly
    to implement (100A+ on two conductors).ÿ The meter itself is the
    "fuse" so it is removed when service is disconnected.ÿ A locking
    ring holds the meter to the mating socket and the meter is replaced by
    a blank cover (to protect from the bare line contacts) when it
    is removed -- still secured by said ring)

    In the case of Spain, the meter has the ability to limit the Amps. It
    can switch off.

    This is because the contract with the utility says how many Amps the
    client contracts, in steps of 5A, but written in Watts. And the monthly receipt charges an amount that is proportional to the number of days and
    the Watts. Thus we try to contract the minimum we can live with. I have
    10A total because it is a very old contract, but typical would be 20A.

    The meter can be programmed remotely to a number or amps. If the limit
    is 15 and you draw more, it triggers and powers off the house for some time.

    (I have a 10A contract, but the limiter seems to have a lower limit of
    15, not 10).


    Thus, they also have the ability to remotely switch off a client. Some
    clients would then remove the meter and put a jumper, if they can access
    it.

    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Saturday, November 14, 2026 14:46:38
    On 11/14/2026 12:56 PM, Carlos E.R. wrote:
    On 2026-11-14 09:18, Don Y wrote:
    On 11/13/2026 1:47 PM, Carlos E.R. wrote:

    I suspect "need" is an overstatement; maybe "want" (I doubt anyone will go
    hungry if they don't get their FROZEN food delivery, today)

    There are flats with no kitchen. Maybe a microwave to reheat packaged >>>>> portions, or have the food ready to eat delivered from many restaurants >>>>> just in time.

    I don't think that is the case, here -- except in dorm rooms or hotels. >>>> Most homes have a kitchen or kitchenette.ÿ (Most dorms likely have a
    hot plate, even if it is prohibited!).

    Google says they are common in Thailand. It also says they exist in Spain >>> and USA.

    Sources:

    <https://agnetwest.com/no-kitchens-future-homes/>

    No Kitchens in Future Homes?

    December 11, 2023This Land of Ours

    Will our future homes be built without kitchens? That?s coming up on This >>> Land of Ours.


    <https://metropolismag.com/projects/anna-puigjaner-kitchenless-home/>

    This Spanish Architect Wants to Revolutionize the Home?by Getting Rid of >>> Kitchens

    Few spaces of the home are as coveted as the kitchen. But Anna Puigjaner is
    showing the way out of these wasteful private cooking boxes toward more >>> efficient ?shared? alternatives.


    <https://www.treehugger.com/alice-constance-austin-houses-without-
    kitchens-5201804>

    Alice Constance Austin Designed Houses Without Kitchens in 1917

    An underground electric railway delivered food from central kitchens to each
    house.


    <https://en.wikipedia.org/wiki/Single-kitchen_home>

    Single-kitchen home

    The single-kitchen home was a reform model of urban residential development
    in which a centrally managed canteen kitchen within a multi-party house >>> replaced the kitchens of the individual apartments. The concept was based on
    the ideas of the women's rights activist and social democrat Lily Braun. >>> With the basic idea of liberating women from housework, at the beginning of
    the 20th century it was an explicit counter-design to the establishment of >>> the isolated nuclear family in mass housing. Single-kitchen houses,
    sometimes also called central kitchen houses, were implemented in various >>> European large cities in isolated and different ways until the 1950s. As key
    works of an idea of modern living, some of these buildings were nominated >>> for the European Heritage Label in 2009, expressly as a network of common >>> European architecture spread across various countries.
    I think there would be a lot of resistance to that, here.ÿ Kitchens
    are one of the most "gifted" rooms in a home -- appliances, gadgets,
    etc.

    You will still end up with some sort of place to store foodstuffs and
    the means to eat them (and some limited means of preparing them).
    Hard to imagine refrigerators, freezers, ice makers, etc. going away.

    And, with young people struggling to *afford* a home, it's hard
    to believe they would "dine out" at a higher price vs. prepping
    their own meals.ÿ E.g., a purchased $15 burger is a bit
    excessive if you can't make your mortgage payment!

    A comunal kitchen that prepares the same dinner for everybody, is cheaper than
    20 kitchens with their food stores.

    Frozen food or ready to eat packages are not that expensive.

    But that means surrendering your freedom to eat what you want,
    when you want, to some sort of "concensus".

    It's 2:45PM, here. I just ate breakfast -- a pulled pork sandwich.
    How many of the people who live within a *mile* of me would want to
    have a meal in the middle of the afternoon (regardless of what
    they called it). And, how many would want pulled pork on that
    menu?


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Saturday, November 14, 2026 14:54:37
    On 11/14/2026 1:59 PM, Carlos E.R. wrote:
    On 2026-11-14 04:56, Don Y wrote:
    The big problem with smart meters when they are fully smart is that it
    allows the supplier to do remote disconnection of the customer (eg for non >>> payment of bill) without visiting the premises to pull the fuse.

    When I was designing meter, the disconnect feature was too costly
    to implement (100A+ on two conductors).ÿ The meter itself is the
    "fuse" so it is removed when service is disconnected.ÿ A locking
    ring holds the meter to the mating socket and the meter is replaced by
    a blank cover (to protect from the bare line contacts) when it
    is removed -- still secured by said ring)

    In the case of Spain, the meter has the ability to limit the Amps. It can switch off.

    This is because the contract with the utility says how many Amps the client contracts, in steps of 5A, but written in Watts. And the monthly receipt charges an amount that is proportional to the number of days and the Watts. Thus we try to contract the minimum we can live with. I have 10A total because
    it is a very old contract, but typical would be 20A.

    The meter can be programmed remotely to a number or amps. If the limit is 15 and you draw more, it triggers and powers off the house for some time.

    (I have a 10A contract, but the limiter seems to have a lower limit of 15, not
    10).

    A typical home, here, will have a 100A or 200A service.
    Our "quiescent load" is probably close to 1000W (the house is
    always active so there is no time when everything is "off";
    there are usually 3 or 4 computers running, TV, etc.)

    The air conditioner draws 15A @ 220VAC -- plus another kilowatt
    for the blower motor.

    The electric range/oven draws up to 3KW per stovetop burner;
    probably comparable for the elements inside the ovens.

    A hand-held hair dryer, 1000W. Ditto for a toaster. Or electric
    frying pan.

    [Each of my workstations has an 1100W power supply -- though that
    isn't taxed significantly in any of them]
    Thus, they also have the ability to remotely switch off a client. Some clients
    would then remove the meter and put a jumper, if they can access it.



    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Sunday, November 15, 2026 22:07:55
    On 2026-11-14 22:54, Don Y wrote:
    On 11/14/2026 1:59 PM, Carlos E.R. wrote:
    On 2026-11-14 04:56, Don Y wrote:
    The big problem with smart meters when they are fully smart is that
    it allows the supplier to do remote disconnection of the customer
    (eg for non payment of bill) without visiting the premises to pull
    the fuse.

    When I was designing meter, the disconnect feature was too costly
    to implement (100A+ on two conductors).ÿ The meter itself is the
    "fuse" so it is removed when service is disconnected.ÿ A locking
    ring holds the meter to the mating socket and the meter is replaced by
    a blank cover (to protect from the bare line contacts) when it
    is removed -- still secured by said ring)

    In the case of Spain, the meter has the ability to limit the Amps. It
    can switch off.

    This is because the contract with the utility says how many Amps the
    client contracts, in steps of 5A, but written in Watts. And the
    monthly receipt charges an amount that is proportional to the number
    of days and the Watts. Thus we try to contract the minimum we can live
    with. I have 10A total because it is a very old contract, but typical
    would be 20A.

    The meter can be programmed remotely to a number or amps. If the limit
    is 15 and you draw more, it triggers and powers off the house for some
    time.

    (I have a 10A contract, but the limiter seems to have a lower limit of
    15, not 10).

    A typical home, here, will have a 100A or 200A service.
    Our "quiescent load" is probably close to 1000W (the house is
    always active so there is no time when everything is "off";
    there are usually 3 or 4 computers running, TV, etc.)

    The air conditioner draws 15A @ 220VAC -- plus another kilowatt
    for the blower motor.

    Mine draws 200..300 watts to maintain the temperature. Cools 3 rooms.
    Can draw up to 1200 W when the temp difference is "big".

    Computers draw little. The biggest may be 100..200 watts normally, but I haven't measured it recently.

    Standby things, maybe 50.


    The electric range/oven draws up to 3KW per stovetop burner;
    probably comparable for the elements inside the ovens.

    I have to use one at a time, so 1 KW.


    A hand-held hair dryer, 1000W.ÿ Ditto for a toaster.ÿ Or electric
    frying pan.

    Wait for your turn. :-)


    My house is a special case. Typical house can have 15..25A. It is your
    choice, but you pay for it. So, you choose as little as you can make with.


    [Each of my workstations has an 1100W power supply -- though that
    isn't taxed significantly in any of them]
    Thus, they also have the ability to remotely switch off a client. Some
    clients would then remove the meter and put a jumper, if they can
    access it.




    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Sunday, November 15, 2026 17:09:06
    A typical home, here, will have a 100A or 200A service.
    Our "quiescent load" is probably close to 1000W (the house is
    always active so there is no time when everything is "off";
    there are usually 3 or 4 computers running, TV, etc.)

    The air conditioner draws 15A @ 220VAC -- plus another kilowatt
    for the blower motor.

    Mine draws 200..300 watts to maintain the temperature. Cools 3 rooms. Can draw
    up to 1200 W when the temp difference is "big".

    It takes a lot of refrigeration to cool a few thousand square feet
    when the outdoor temperature is 110F.

    Computers draw little. The biggest may be 100..200 watts normally, but I haven't measured it recently.

    Each of my workstations has 3 monitors so the monitors alone eat up
    a good fraction of that -- plus the pair of GPUs to drive the monitors,
    the four spindles inside, etc.

    *This* computer is on all the time (never sleeping). There's another
    in my bedroom that does core network services. Router, modem, two
    printers.

    Standby things, maybe 50.

    There are a lot of parasitic loads in most houses, here. Ours, probably more than most.

    Each of my (39?) computers/servers/NASs/DASs/SANs draws some idle current
    to determine when you've pressed the POWER button. One has an annoying
    habit of keeping a *fan* running when I fail to pull the power cord! Five network switches (3x24 + 2x16). 18 monitors. 8 port KVM for interacting
    with my prototype (a set of 8 of the aforementioned machines).

    Three TVs with similar parasitic currents. Two scanners waiting to be
    "woken up". 12 UPSs. All of the kitchen/laundry appliances (stove/oven, refrigerator, microwave, dishwasher, clothes washer, clothes dryer) have
    MCUs inside waiting to turn on. Two multimedia computers (which tend to
    get left on because we can't easily TELL if they are on or off without
    turning on the associated TV and selecting that video source)

    Freezer chest, garage door opener (listening for an OPEN command), 3 cordless phone stations, chargers for the cell phones and eReaders, two HiFis, timepieces...

    etc.

    Electricity is relatively cheap (~15c/KWHr) and unplugging things that don't have real power switches is a real hassle! I've considered designing a
    small, self-powered galvanic switch to insert in each power cord but the time to design and fabricate exceeds the cost of just paying for the electricity!

    The electric range/oven draws up to 3KW per stovetop burner;
    probably comparable for the elements inside the ovens.

    I have to use one at a time, so 1 KW.

    Last nights dinner used three stovetop burners -- though not on "high".
    (Its a challenge to make sure everything is ready to eat at the same time)

    A hand-held hair dryer, 1000W.ÿ Ditto for a toaster.ÿ Or electric
    frying pan.

    Wait for your turn. :-)

    We rarely dry our hair as it's easier to just crack a window in the
    car and it dries in just a couple of minutes (low humidity). No need
    to dry it if you're staying home!
    My house is a special case. Typical house can have 15..25A. It is your choice,
    but you pay for it. So, you choose as little as you can make with.

    In general, americans are pretty wasteful of energy. (acknowledging that
    SWMBO & I are gluttonous; OTOH, we probably use less than 200 gallons of
    petrol annually for our *combined* needs). But, energy is relatively cheap
    and plentiful so convenience trumps cost.

    E.g., we could probably eat for the better part of a month on what we
    have in the two freezers and refrigerator. We drink "fresh squeezed"
    OJ all year long from our annual citrus harvest (by freezing it).

    [Each of my workstations has an 1100W power supply -- though that
    isn't taxed significantly in any of them]
    Thus, they also have the ability to remotely switch off a client. Some
    clients would then remove the meter and put a jumper, if they can access it.






    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Tuesday, November 17, 2026 12:32:45
    On 2026-11-16 01:09, Don Y wrote:
    A typical home, here, will have a 100A or 200A service.
    Our "quiescent load" is probably close to 1000W (the house is
    always active so there is no time when everything is "off";
    there are usually 3 or 4 computers running, TV, etc.)

    The air conditioner draws 15A @ 220VAC -- plus another kilowatt
    for the blower motor.

    Mine draws 200..300 watts to maintain the temperature. Cools 3 rooms.
    Can draw up to 1200 W when the temp difference is "big".

    It takes a lot of refrigeration to cool a few thousand square feet
    when the outdoor temperature is 110F.

    Maybe, but:

    I don't cool the entire house, just a part.
    I just cool down to 27øC (80.6F).

    I live in a city by the Mediterranean, so temps rarely go above 35øC. It usually sits below 31 in August, but with high humidity. Just go inland
    by 50 Km, and temps of 40 happen too much.

    ...


    etc.

    Electricity is relatively cheap (~15c/KWHr) and unplugging things
    that don't have real power switches is a real hassle!

    True. I have my bunch of stdby things, but you win :-p


    Wait for your turn. :-)

    I just don't have the power (old house with no certified installation),
    so I just don't turn hungry things at the same time. I have to calculate
    when to power up what. New houses or simply houses with a certified installation have more power, but as in Spain we have to pay for each
    Watt our installation can draw simultaneously, unless you are rich we do
    have a care to reduce simultaneous load. We have to.

    For example, my electric hot water tank (I can also use gas heated
    water) draws just 1KW, and has a timer to run from 3AM to 9AM. Plus, I inserted a diode in series so in fact only uses 500W. It works fine :-D


    Spain is peculiar in this. Google says France, Italy and Portugal do
    similar, but not Germany, the United Kingdom, the Netherlands and most
    of northern and central Europe.


    We rarely dry our hair as it's easier to just crack a window in the
    car and it dries in just a couple of minutes (low humidity).ÿ No need
    to dry it if you're staying home!
    My house is a special case. Typical house can have 15..25A. It is your
    choice, but you pay for it. So, you choose as little as you can make
    with.

    In general, americans are pretty wasteful of energy.ÿ (acknowledging that SWMBO & I are gluttonous; OTOH, we probably use less than 200 gallons of petrol annually for our *combined* needs).ÿ But, energy is relatively cheap and plentiful so convenience trumps cost.

    Yes, I know that :-)


    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Tuesday, November 17, 2026 08:02:39
    On 11/17/2026 4:32 AM, Carlos E.R. wrote:
    On 2026-11-16 01:09, Don Y wrote:
    A typical home, here, will have a 100A or 200A service.
    Our "quiescent load" is probably close to 1000W (the house is
    always active so there is no time when everything is "off";
    there are usually 3 or 4 computers running, TV, etc.)

    The air conditioner draws 15A @ 220VAC -- plus another kilowatt
    for the blower motor.

    Mine draws 200..300 watts to maintain the temperature. Cools 3 rooms. Can >>> draw up to 1200 W when the temp difference is "big".

    It takes a lot of refrigeration to cool a few thousand square feet
    when the outdoor temperature is 110F.

    Maybe, but:

    ÿ I don't cool the entire house, just a part.
    ÿ I just cool down to 27øC (80.6F).

    We can't really cool/heat "just a part" of the house -- even if we could convince the HVAC to only circulate air in that part of the house. With
    the exception of bedrooms/bathroom, the house is basically one continuous volume without doors to partition it. Nor could doors be (easily) *added*
    to close off individual areas; the original intent was for a large, open
    space.

    I live in a city by the Mediterranean, so temps rarely go above 35øC. It

    I've experienced 47C, here. 43C isn't a surprise. I think we see
    ~60 days at 38C (112 of them in 2024).

    The problem isn't really the temperature but, rather, its persistence.
    E.g., we started using the air conditioning in February of this year.
    And, still use it now, in November -- despite the fact that it *may*
    drop to 8C overnight.

    usually sits below 31 in August, but with high humidity. Just go inland by 50
    Km, and temps of 40 happen too much.

    If we were to "climb the mountain" (a few miles drive), temperatures
    drop significantly (an increase of ~6500 ft in elevation). Some folks
    maintain a residence, here, in the valley, for winter occupancy and
    another, on the mountain, for summer residency)

    [The idea of living in two places would be maddening, for me -- always wondering if something I seek is *hiding*, "here", or actually *there*
    (and the cost of checking "there" being too high to abandon searching
    *here*!)]

    Electricity is relatively cheap (~15c/KWHr) and unplugging things
    that don't have real power switches is a real hassle!

    True. I have my bunch of stdby things, but you win :-p

    Much of our "static" load is just things that never get turned off.
    E.g., my workstations rarely get a chance to "hinernate" because I
    revisit them frequently instead of letting them power down "at the
    end of the day".

    And, as SWMBO tend to live intertwined schedules (e.g., she is just
    getting up and I will be headed for a nap, soon), the house never
    goes dark.

    Wait for your turn. :-)

    I just don't have the power (old house with no certified installation), so I just don't turn hungry things at the same time. I have to calculate when to power up what. New houses or simply houses with a certified installation have
    more power, but as in Spain we have to pay for each Watt our installation can
    draw simultaneously, unless you are rich we do have a care to reduce simultaneous load. We have to.

    I operate similarly with much of "my" equipment as bedrooms trend to
    be on single 15A (@110VAC) branch circuits. So, I can't power up
    too many machines without fear of tripping a breaker (the UPSs
    protect me from such folly).

    E.g., I used to have a 60 drive array configured to make much of my
    archive accessible "at the same time". But, powering up that many
    spindles -- esp if you only really *need* one or two "now" -- limits
    what you can do elsewhere.

    For example, my electric hot water tank (I can also use gas heated water) draws
    just 1KW, and has a timer to run from 3AM to 9AM. Plus, I inserted a diode in
    series so in fact only uses 500W. It works fine :-D

    The timer wouldn't work well, here, owing to the "never down" aspect of
    our living style. Our water heater is gas-fired; we are equally gluttonous with our use of hot water (nothing finer than a nice LONG, hot shower!)
    Spain is peculiar in this. Google says France, Italy and Portugal do similar,
    but not Germany, the United Kingdom, the Netherlands and most of northern and
    central Europe.

    We rarely dry our hair as it's easier to just crack a window in the
    car and it dries in just a couple of minutes (low humidity).ÿ No need
    to dry it if you're staying home!
    My house is a special case. Typical house can have 15..25A. It is your
    choice, but you pay for it. So, you choose as little as you can make with. >>
    In general, americans are pretty wasteful of energy.ÿ (acknowledging that
    SWMBO & I are gluttonous; OTOH, we probably use less than 200 gallons of
    petrol annually for our *combined* needs).ÿ But, energy is relatively cheap >> and plentiful so convenience trumps cost.

    Yes, I know that :-)
    If devices could sleep AND WAKE quickly and efficiently, there is a
    great potential to save, even if you are just "turning away" for a few
    moments.

    But, when you have to wait for an appliance to wake up, it becomes a
    nuisance; you effectively end up defeating any "sleep" mechanism.

    I'm designing a replacement for SWMBO's "HiFi". "Instant on" is one
    of the prerequisites so it can sleep whenever she leaves the room, etc.
    without being inconvenient to power back up. I can't make similar changes
    to the TVs (even if I control the external program source) as they take
    a noticeable amount of time to "light up" (what the hell are they
    DOING in all that time??)

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Tuesday, November 17, 2026 22:53:46
    On 2026-11-17 16:02, Don Y wrote:

    ...

    For example, my electric hot water tank (I can also use gas heated
    water) draws just 1KW, and has a timer to run from 3AM to 9AM. Plus, I
    inserted a diode in series so in fact only uses 500W. It works fine ?

    The timer wouldn't work well, here, owing to the "never down" aspect of
    our living style.ÿ Our water heater is gas-fired; we are equally gluttonous with our use of hot water (nothing finer than a nice LONG, hot shower!)

    It is a tank. It stores hot water for use anytime, but may be active
    just a few hours, like when electricity is cheaper.


    I also have a gas fired (butane) flash water heater, and I can enable
    any of the two; unfortunately, this heater heats the hot water too much resulting in too hot water for showers, there is not enough cold water
    (and not cold enough) to cool down that flow during the summer showers.
    So during the summer I decided to use the electric tank and use much
    less water.

    In winter (not yet here!) I'll reverse and use the gas fired water heater.



    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Tuesday, November 17, 2026 16:29:40
    On 11/17/2026 2:53 PM, Carlos E.R. wrote:
    On 2026-11-17 16:02, Don Y wrote:

    ...

    For example, my electric hot water tank (I can also use gas heated water) >>> draws just 1KW, and has a timer to run from 3AM to 9AM. Plus, I inserted a >>> diode in series so in fact only uses 500W. It works fine ?

    The timer wouldn't work well, here, owing to the "never down" aspect of
    our living style.ÿ Our water heater is gas-fired; we are equally gluttonous >> with our use of hot water (nothing finer than a nice LONG, hot shower!)

    It is a tank. It stores hot water for use anytime, but may be active just a few
    hours, like when electricity is cheaper.

    Yes, most water heaters, here, are tanks with a gas or electric heating element. "Tankless" units are less common.

    The size (volume) of the tank determines how long that hot shower will be...

    I also have a gas fired (butane) flash water heater, and I can enable any of the two; unfortunately, this heater heats the hot water too much resulting in

    Ah! I had not considered that! The tank has a thermostat. I never considered how they would (could?) set the temperature of water in a tankless unit, esp
    a gas-fired unit.

    too hot water for showers, there is not enough cold water (and not cold enough)
    to cool down that flow during the summer showers. So during the summer I decided to use the electric tank and use much less water.

    In winter (not yet here!) I'll reverse and use the gas fired water heater.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Wednesday, November 18, 2026 02:34:47
    On 2026-11-18 00:29, Don Y wrote:
    On 11/17/2026 2:53 PM, Carlos E.R. wrote:
    On 2026-11-17 16:02, Don Y wrote:

    ...

    For example, my electric hot water tank (I can also use gas heated
    water) draws just 1KW, and has a timer to run from 3AM to 9AM. Plus,
    I inserted a diode in series so in fact only uses 500W. It works
    fine ?

    The timer wouldn't work well, here, owing to the "never down" aspect of
    our living style.ÿ Our water heater is gas-fired; we are equally
    gluttonous
    with our use of hot water (nothing finer than a nice LONG, hot shower!)

    It is a tank. It stores hot water for use anytime, but may be active
    just a few hours, like when electricity is cheaper.

    Yes, most water heaters, here, are tanks with a gas or electric heating element.ÿ "Tankless" units are less common.

    The size (volume) of the tank determines how long that hot shower will
    be...

    I also have a gas fired (butane) flash water heater, and I can enable
    any of the two; unfortunately, this heater heats the hot water too
    much resulting in

    Ah! I had not considered that! The tank has a thermostat. I
    never considered how they would (could?) set the temperature of
    water in a tankless unit, esp a gas-fired unit.

    My gas flash heater is a simple one. It uses a fixed gas rate, so the
    more you open the tap, the colder the water runs. The gas flow can be
    adjusted manually, same as in a gas ring, with a knob.

    It has a security thermostat that switchs off the gas
    if the output water goes over some very high temperature.
    I don't know what T.

    In summer, it runs too hot, even with a a full tap. I need to mix with
    cold water, also at full tap. Not enough cold water, though.

    There are more expensive units that adjust the flow of gas dynamically,
    so that the water keeps a constant temperature, independent of entry
    temp and water flow rate. So it needs electrical power to run the
    adjustments. Summer, winter, one tap, two, half tap, full tap... no
    matter, the temperature is constant.




    too hot water for showers, there is not enough cold water (and not
    cold enough) to cool down that flow during the summer showers. So
    during the summer I decided to use the electric tank and use much less
    water.

    In winter (not yet here!) I'll reverse and use the gas fired water
    heater.


    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Tuesday, November 17, 2026 20:58:01
    On 11/17/2026 6:34 PM, Carlos E.R. wrote:
    I also have a gas fired (butane) flash water heater, and I can enable any of
    the two; unfortunately, this heater heats the hot water too much resulting in

    Ah!ÿ I had not considered that!ÿ The tank has a thermostat.ÿ I
    never considered how they would (could?) set the temperature of
    water in a tankless unit, esp a gas-fired unit.

    My gas flash heater is a simple one. It uses a fixed gas rate, so the more you
    open the tap, the colder the water runs. The gas flow can be adjusted manually,
    same as in a gas ring, with a knob.

    Our water heaters monitor the temperature of the water in the tank
    and gate the heating element on/off. I don't think there is
    proportional control (the tank's volume is used against duty cycle
    to achieve that).

    ÿÿ It has a security thermostat that switchs off the gas
    ÿÿ if the output water goes over some very high temperature.
    ÿÿ I don't know what T.

    Ours have an overpressure relief that vents the tank. Most homes fail
    to install expansion tanks on the water heater so it is possible for
    water pressure to increase as the water is heated (and expands).

    Homes with pressure reducing valves often rely on the valve's design
    to open when "inside" pressure exceeds that of the water main. But,
    that defeats the purpose of having a pressure reducing valve.

    In summer, it runs too hot, even with a a full tap. I need to mix with cold water, also at full tap. Not enough cold water, though.

    We have a similar problem with our cold water supply -- you need to
    rely on chilled water if you like a "cold drink" in summer.

    There are more expensive units that adjust the flow of gas dynamically, so that
    the water keeps a constant temperature, independent of entry temp and water flow rate. So it needs electrical power to run the adjustments. Summer, winter,
    one tap, two, half tap, full tap... no matter, the temperature is constant.
    It seems it would be easier to adjust temperature by controlling a mixing valve. Especially in cases where sudden drops in water pressure can
    affect the output.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From john larkin@3:633/10 to All on Wednesday, November 18, 2026 10:41:23
    On Wed, 18 Nov 2026 02:34:47 +0100, "Carlos E.R."
    <robin_listas@es.invalid> wrote:

    On 2026-11-18 00:29, Don Y wrote:
    On 11/17/2026 2:53 PM, Carlos E.R. wrote:
    On 2026-11-17 16:02, Don Y wrote:

    ...

    For example, my electric hot water tank (I can also use gas heated
    water) draws just 1KW, and has a timer to run from 3AM to 9AM. Plus, >>>>> I inserted a diode in series so in fact only uses 500W. It works
    fine ?

    The timer wouldn't work well, here, owing to the "never down" aspect of >>>> our living style.? Our water heater is gas-fired; we are equally
    gluttonous
    with our use of hot water (nothing finer than a nice LONG, hot shower!) >>>
    It is a tank. It stores hot water for use anytime, but may be active
    just a few hours, like when electricity is cheaper.

    Yes, most water heaters, here, are tanks with a gas or electric heating
    element.? "Tankless" units are less common.

    The size (volume) of the tank determines how long that hot shower will
    be...

    I also have a gas fired (butane) flash water heater, and I can enable
    any of the two; unfortunately, this heater heats the hot water too
    much resulting in

    Ah! I had not considered that! The tank has a thermostat. I
    never considered how they would (could?) set the temperature of
    water in a tankless unit, esp a gas-fired unit.

    My gas flash heater is a simple one. It uses a fixed gas rate, so the
    more you open the tap, the colder the water runs. The gas flow can be >adjusted manually, same as in a gas ring, with a knob.

    It has a security thermostat that switchs off the gas
    if the output water goes over some very high temperature.
    I don't know what T.

    In summer, it runs too hot, even with a a full tap. I need to mix with
    cold water, also at full tap. Not enough cold water, though.

    There are more expensive units that adjust the flow of gas dynamically,
    so that the water keeps a constant temperature, independent of entry
    temp and water flow rate. So it needs electrical power to run the >adjustments. Summer, winter, one tap, two, half tap, full tap... no
    matter, the temperature is constant.

    Whan I was a kid, we had a tankless water heater that had a temperature-operated gas valve, a bimetal thing. No electricity
    involved.




    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Wednesday, November 18, 2026 13:42:22
    On 11/2/2026 6:15 AM, Don Y wrote:
    <https://apnews.com/article/europe-supermarkets-freezers-cyberattacks- a8ea5b30d67da47957769f29101fe686>

    "...its fridges and freezers had been hacked and set to 50 degrees Celsius"

    And, why would a temperature controller for a FREEZER ever allow
    such a high temperature?ÿ In case you wanted to convert them to
    walk-in ovens???

    Who *specifies* such systems and who naively implements those specifications?

    [The last batch of targets used "older technology"... so, nothing
    was learned in the revisions that followed?]

    So, maybe it was just a dry run -- in light of all the other things that
    "show no signs of being hacked" (yet all shit the bed around the same time)?

    [As if claiming you have no evidence of foul play reassures people that:
    - there is no foul play
    - YOU are on top of the situation!]

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Thursday, November 19, 2026 12:28:00
    On 2026-11-18 04:58, Don Y wrote:
    On 11/17/2026 6:34 PM, Carlos E.R. wrote:
    I also have a gas fired (butane) flash water heater, and I can
    enable any of the two; unfortunately, this heater heats the hot
    water too much resulting in

    Ah!ÿ I had not considered that!ÿ The tank has a thermostat.ÿ I
    never considered how they would (could?) set the temperature of
    water in a tankless unit, esp a gas-fired unit.

    My gas flash heater is a simple one. It uses a fixed gas rate, so the
    more you open the tap, the colder the water runs. The gas flow can be
    adjusted manually, same as in a gas ring, with a knob.

    Our water heaters monitor the temperature of the water in the tank
    and gate the heating element on/off.ÿ I don't think there is
    proportional control (the tank's volume is used against duty cycle
    to achieve that).

    I suppose you know that flash heaters do not have a tank: they just heat
    the water in a heat exchanger with a big flame.

    The type of flash heater with proportional adjustment may have a small
    tank, less than 10 litres. Hot water is instant, on demand. Normal flash heaters have a delay, from a pair of seconds up to half a minute.


    ÿÿÿ It has a security thermostat that switchs off the gas
    ÿÿÿ if the output water goes over some very high temperature.
    ÿÿÿ I don't know what T.

    Ours have an overpressure relief that vents the tank.ÿ Most homes fail
    to install expansion tanks on the water heater so it is possible for
    water pressure to increase as the water is heated (and expands).

    Homes with pressure reducing valves often rely on the valve's design
    to open when "inside" pressure exceeds that of the water main.ÿ But,
    that defeats the purpose of having a pressure reducing valve.

    In summer, it runs too hot, even with a a full tap. I need to mix with
    cold water, also at full tap. Not enough cold water, though.

    We have a similar problem with our cold water supply -- you need to
    rely on chilled water if you like a "cold drink" in summer.

    There are more expensive units that adjust the flow of gas
    dynamically, so that the water keeps a constant temperature,
    independent of entry temp and water flow rate. So it needs electrical
    power to run the adjustments. Summer, winter, one tap, two, half tap,
    full tap... no matter, the temperature is constant.
    It seems it would be easier to adjust temperature by controlling a mixing valve.ÿ Especially in cases where sudden drops in water pressure can
    affect the output.

    Controlling the gas flow saves water and gas.

    But they do exist, of course, just that they are implemented in the tap:
    a knob sets the desired temperature, and another the total water flow
    you want.

    <https://www.amazon.es/-/en/Thermostatic-Thermostat-Chrome-plated-Temperature-Comfortable/dp/B0FH6XG7LF>


    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Thursday, November 19, 2026 05:04:52
    On 11/19/2026 4:28 AM, Carlos E.R. wrote:
    On 2026-11-18 04:58, Don Y wrote:
    On 11/17/2026 6:34 PM, Carlos E.R. wrote:
    I also have a gas fired (butane) flash water heater, and I can enable any
    of the two; unfortunately, this heater heats the hot water too much >>>>> resulting in

    Ah!ÿ I had not considered that!ÿ The tank has a thermostat.ÿ I
    never considered how they would (could?) set the temperature of
    water in a tankless unit, esp a gas-fired unit.

    My gas flash heater is a simple one. It uses a fixed gas rate, so the more >>> you open the tap, the colder the water runs. The gas flow can be adjusted >>> manually, same as in a gas ring, with a knob.

    Our water heaters monitor the temperature of the water in the tank
    and gate the heating element on/off.ÿ I don't think there is
    proportional control (the tank's volume is used against duty cycle
    to achieve that).

    I suppose you know that flash heaters do not have a tank: they just heat the water in a heat exchanger with a big flame.

    Yes.

    The type of flash heater with proportional adjustment may have a small tank, less than 10 litres. Hot water is instant, on demand. Normal flash heaters have
    a delay, from a pair of seconds up to half a minute.

    I would have assumed that getting fast response from direct control of the heating element would be more difficult than altering the blend of heated
    and unheated water.

    ÿÿÿ It has a security thermostat that switchs off the gas
    ÿÿÿ if the output water goes over some very high temperature.
    ÿÿÿ I don't know what T.

    Ours have an overpressure relief that vents the tank.ÿ Most homes fail
    to install expansion tanks on the water heater so it is possible for
    water pressure to increase as the water is heated (and expands).

    Homes with pressure reducing valves often rely on the valve's design
    to open when "inside" pressure exceeds that of the water main.ÿ But,
    that defeats the purpose of having a pressure reducing valve.

    In summer, it runs too hot, even with a a full tap. I need to mix with cold
    water, also at full tap. Not enough cold water, though.

    We have a similar problem with our cold water supply -- you need to
    rely on chilled water if you like a "cold drink" in summer.

    There are more expensive units that adjust the flow of gas dynamically, so >>> that the water keeps a constant temperature, independent of entry temp and >>> water flow rate. So it needs electrical power to run the adjustments.
    Summer, winter, one tap, two, half tap, full tap... no matter, the
    temperature is constant.
    It seems it would be easier to adjust temperature by controlling a mixing
    valve.ÿ Especially in cases where sudden drops in water pressure can
    affect the output.

    Controlling the gas flow saves water and gas.

    The *tap* determines the amount of water used, regardless of what the water heater is doing.

    But they do exist, of course, just that they are implemented in the tap: a knob
    sets the desired temperature, and another the total water flow you want.

    <https://www.amazon.es/-/en/Thermostatic-Thermostat-Chrome-plated-Temperature-
    Comfortable/dp/B0FH6XG7LF>
    Many "valve sets", here, are implemented as mix+volume.

    But, you still have the transport delay from heating unit to tap.

    In some sites (esp commercial), a small water heater is located *at*
    the site of consumption so there is less transport delay.

    But, you need a source of energy *at* that location (so electricity
    is most often used)

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Thursday, November 19, 2026 21:12:43
    On 2026-11-19 13:04, Don Y wrote:
    On 11/19/2026 4:28 AM, Carlos E.R. wrote:
    On 2026-11-18 04:58, Don Y wrote:
    On 11/17/2026 6:34 PM, Carlos E.R. wrote:
    I also have a gas fired (butane) flash water heater, and I can
    enable any of the two; unfortunately, this heater heats the hot
    water too much resulting in

    Ah!ÿ I had not considered that!ÿ The tank has a thermostat.ÿ I
    never considered how they would (could?) set the temperature of
    water in a tankless unit, esp a gas-fired unit.

    My gas flash heater is a simple one. It uses a fixed gas rate, so
    the more you open the tap, the colder the water runs. The gas flow
    can be adjusted manually, same as in a gas ring, with a knob.

    Our water heaters monitor the temperature of the water in the tank
    and gate the heating element on/off.ÿ I don't think there is
    proportional control (the tank's volume is used against duty cycle
    to achieve that).

    I suppose you know that flash heaters do not have a tank: they just
    heat the water in a heat exchanger with a big flame.

    Yes.

    The type of flash heater with proportional adjustment may have a small
    tank, less than 10 litres. Hot water is instant, on demand. Normal
    flash heaters have a delay, from a pair of seconds up to half a minute.

    I would have assumed that getting fast response from direct control of the heating element would be more difficult than altering the blend of heated
    and unheated water.

    From experience (I sometimes go to another flat that has this system,
    in a colder city), once I adjust the temperature at the tap, I don't
    have to touch it during the shower, even if other person opens a tap at
    the house.

    Heck, after I saw a rocket stage landing back somewhere
    instead of crashing into the ocean, I stopped being surprised
    at what we can do.

    So the output temperature of the water is 45øC. You just further adjust
    at the tap blending some cold water.

    This particular heater main usage is to provide hot water to room
    radiators distributed around the flat to heat it up in winter, so it
    already has the gas regulation system. When you open a tap, it changes function instantly to heat the hot water tap. It is probably the most
    common house heating system employed in Spain.



    ÿÿÿ It has a security thermostat that switchs off the gas
    ÿÿÿ if the output water goes over some very high temperature.
    ÿÿÿ I don't know what T.

    Ours have an overpressure relief that vents the tank.ÿ Most homes fail
    to install expansion tanks on the water heater so it is possible for
    water pressure to increase as the water is heated (and expands).

    Homes with pressure reducing valves often rely on the valve's design
    to open when "inside" pressure exceeds that of the water main.ÿ But,
    that defeats the purpose of having a pressure reducing valve.

    In summer, it runs too hot, even with a a full tap. I need to mix
    with cold water, also at full tap. Not enough cold water, though.

    We have a similar problem with our cold water supply -- you need to
    rely on chilled water if you like a "cold drink" in summer.

    There are more expensive units that adjust the flow of gas
    dynamically, so that the water keeps a constant temperature,
    independent of entry temp and water flow rate. So it needs
    electrical power to run the adjustments. Summer, winter, one tap,
    two, half tap, full tap... no matter, the temperature is constant.
    It seems it would be easier to adjust temperature by controlling a
    mixing
    valve.ÿ Especially in cases where sudden drops in water pressure can
    affect the output.

    Controlling the gas flow saves water and gas.

    The *tap* determines the amount of water used, regardless of what the water heater is doing.

    Yes and no...

    At my house, with a constant gas flow, if I open the tap more, I get
    colder water. Less water, it is hotter. So the hot water tap must not be moved. From experience, it is best to put it at max flow, and adjust
    only with the cold water. In summer, there is not enough water to cool
    it down. Even if I contract more water from the municipal water service,
    the shower head has a limit.

    If I try opening the hot water at half, to use less water, the hot water temperature doubles, so I have to double the cold water flow to
    compensate. The result is that I end using the same total water flow, I
    can not regulate it.

    Then, if the washing machine starts drawing water, or somebody opens a
    tap, the temperature at my shower changes dramatically. First I freeze,
    then I burn, when that tap is closed.



    Thus, if I can regulate the actual hot water temperature out at the
    heater, I can open the hot water tap on any position and the temperature
    will be the same. Then I adjust with the cold water tap, or both, and I
    can have a shower with a lot of water or with little (as long as the
    heater has sufficient water flow to be detected).



    But they do exist, of course, just that they are implemented in the
    tap: a knob sets the desired temperature, and another the total water
    flow you want.

    <https://www.amazon.es/-/en/Thermostatic-Thermostat-Chrome-plated-
    Temperature- Comfortable/dp/B0FH6XG7LF>
    Many "valve sets", here, are implemented as mix+volume.

    But, you still have the transport delay from heating unit to tap.

    Certainly.


    In some sites (esp commercial), a small water heater is located *at*
    the site of consumption so there is less transport delay.

    But, you need a source of energy *at* that location (so electricity
    is most often used)

    Yep. With a fair amount of electricity available. As in Spain (and
    France and Italy) they charge for how much simultaneous current we use,
    we tend to minimize that usage, and flash electric heater do not have
    much of a market.

    What I have seen in some hotels is have a hot water tank per room. Less instant current. Big houses could do the same thing.

    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Thursday, November 19, 2026 21:16:51
    On 2026-11-18 19:41, john larkin wrote:
    On Wed, 18 Nov 2026 02:34:47 +0100, "Carlos E.R."
    <robin_listas@es.invalid> wrote:

    On 2026-11-18 00:29, Don Y wrote:
    On 11/17/2026 2:53 PM, Carlos E.R. wrote:
    On 2026-11-17 16:02, Don Y wrote:

    ...

    For example, my electric hot water tank (I can also use gas heated >>>>>> water) draws just 1KW, and has a timer to run from 3AM to 9AM. Plus, >>>>>> I inserted a diode in series so in fact only uses 500W. It works
    fine ?

    The timer wouldn't work well, here, owing to the "never down" aspect of >>>>> our living style.ÿ Our water heater is gas-fired; we are equally
    gluttonous
    with our use of hot water (nothing finer than a nice LONG, hot shower!) >>>>
    It is a tank. It stores hot water for use anytime, but may be active
    just a few hours, like when electricity is cheaper.

    Yes, most water heaters, here, are tanks with a gas or electric heating
    element.ÿ "Tankless" units are less common.

    The size (volume) of the tank determines how long that hot shower will
    be...

    I also have a gas fired (butane) flash water heater, and I can enable
    any of the two; unfortunately, this heater heats the hot water too
    much resulting in

    Ah! I had not considered that! The tank has a thermostat. I
    never considered how they would (could?) set the temperature of
    water in a tankless unit, esp a gas-fired unit.

    My gas flash heater is a simple one. It uses a fixed gas rate, so the
    more you open the tap, the colder the water runs. The gas flow can be
    adjusted manually, same as in a gas ring, with a knob.

    It has a security thermostat that switchs off the gas
    if the output water goes over some very high temperature.
    I don't know what T.

    In summer, it runs too hot, even with a a full tap. I need to mix with
    cold water, also at full tap. Not enough cold water, though.

    There are more expensive units that adjust the flow of gas dynamically,
    so that the water keeps a constant temperature, independent of entry
    temp and water flow rate. So it needs electrical power to run the
    adjustments. Summer, winter, one tap, two, half tap, full tap... no
    matter, the temperature is constant.

    Whan I was a kid, we had a tankless water heater that had a temperature-operated gas valve, a bimetal thing. No electricity
    involved.

    I think that these are a bit slow to react, and not perfect reaction.

    My heater uses 2 C cells for firing the gas and some electronics. Works
    very well. The old unit had no electronics, all mechanical, and was problematic. Main visible nuisance is having to light up a small flame
    prior to using it.

    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Thursday, November 19, 2026 14:13:11
    On 11/19/2026 1:12 PM, Carlos E.R. wrote:
    The type of flash heater with proportional adjustment may have a small tank,
    less than 10 litres. Hot water is instant, on demand. Normal flash heaters >>> have a delay, from a pair of seconds up to half a minute.

    I would have assumed that getting fast response from direct control of the >> heating element would be more difficult than altering the blend of heated
    and unheated water.

    From experience (I sometimes go to another flat that has this system, in a colder city), once I adjust the temperature at the tap, I don't have to touch
    it during the shower, even if other person opens a tap at the house.

    Likely over-provisioned.

    ÿÿ Heck, after I saw a rocket stage landing back somewhere
    ÿÿ instead of crashing into the ocean, I stopped being surprised
    ÿÿ at what we can do.

    So the output temperature of the water is 45øC. You just further adjust at the
    tap blending some cold water.

    This particular heater main usage is to provide hot water to room radiators distributed around the flat to heat it up in winter, so it already has the gas
    regulation system. When you open a tap, it changes function instantly to heat
    the hot water tap. It is probably the most common house heating system employed
    in Spain.

    Growing up, we had an oil-fired furnace. The water jacket provided the circulating water for the baseboard heaters.

    Sadly, a heat exchanger that poked *into* the water jacket acted as
    our domestic hot water source. As a result, we had very little
    hot water.

    In every place I've lived in the intervening time, I have goosed
    the thermostat on the water heater to ensure I had "infinite"
    hot water (gradually decreasing the amount of unheated water
    mixed in to prolong the intensity of the shower)

    There are more expensive units that adjust the flow of gas dynamically, so
    that the water keeps a constant temperature, independent of entry temp and
    water flow rate. So it needs electrical power to run the adjustments. >>>>> Summer, winter, one tap, two, half tap, full tap... no matter, the
    temperature is constant.
    It seems it would be easier to adjust temperature by controlling a mixing >>>> valve.ÿ Especially in cases where sudden drops in water pressure can
    affect the output.

    Controlling the gas flow saves water and gas.

    The *tap* determines the amount of water used, regardless of what the water >> heater is doing.

    Yes and no...

    At my house, with a constant gas flow, if I open the tap more, I get colder

    Yes, but the AMOUNT of water consumed is governed by the tap. Control of
    the gas flow doesn't impact the amount of water consumed (except to the
    extent that the water dispensed isn't as desirable as you'd like)

    water. Less water, it is hotter. So the hot water tap must not be moved. From
    experience, it is best to put it at max flow, and adjust only with the cold

    That is what a mixing valve would do -- control the proportions of heated
    and unheated water being passed through.

    water. In summer, there is not enough water to cool it down. Even if I contract

    As our fixtures route heated and unheated water to each site, it is possible
    to have an entirely cold shower (where the value of "cold" is largely determined by the season as water flowing through buried pipes tends to be considerably warmer at end of Summer than at end of Winter)

    more water from the municipal water service, the shower head has a limit.

    If I try opening the hot water at half, to use less water, the hot water temperature doubles, so I have to double the cold water flow to compensate. The
    result is that I end using the same total water flow, I can not regulate it.

    Then, if the washing machine starts drawing water, or somebody opens a tap, the
    temperature at my shower changes dramatically. First I freeze, then I burn, when that tap is closed.

    SWMBO complains of this phenomenon -- regardless of how much water I draw
    from other taps. I suspect she largely imagines it as I never notice
    when she washes clothes, dishes, etc. while *I* am in the shower.

    Our irrigation system can consume more water than the house so when it
    kicks on, you don't want to be in the shower (so, we don't let it kick
    on if it notices water being consumed in the house)

    Thus, if I can regulate the actual hot water temperature out at the heater, I
    can open the hot water tap on any position and the temperature will be the

    That is how a heater with a tank operates; the stored water is at the preset temperature and remains there (nominally) as long as the draw on the reserve doesn't exceed the tank's ability to heat "new" water (which blends with the larger volume of already heated water).

    [Nominal household tank sizes are 40, 60, 80 gallons]

    In (parts of MX), water is delivered (The Water Truck) to a storage tank
    at each residence. The amount of heated water -- and water in general -- is something you have to be cognizant of lest you run out.

    [Bathing is disappointing; better to bathe in the ocean than at home!]

    same. Then I adjust with the cold water tap, or both, and I can have a shower
    with a lot of water or with little (as long as the heater has sufficient water
    flow to be detected).

    But they do exist, of course, just that they are implemented in the tap: a >>> knob sets the desired temperature, and another the total water flow you want.

    <https://www.amazon.es/-/en/Thermostatic-Thermostat-Chrome-plated-
    Temperature- Comfortable/dp/B0FH6XG7LF>
    Many "valve sets", here, are implemented as mix+volume.

    But, you still have the transport delay from heating unit to tap.

    Certainly.

    The advantage of tankless is you can site it in a cabinet -- if you have an energy source nearby. The heaters with tanks tend to be as large as a
    person (height/width).

    In some sites (esp commercial), a small water heater is located *at*
    the site of consumption so there is less transport delay.

    But, you need a source of energy *at* that location (so electricity
    is most often used)

    Yep. With a fair amount of electricity available. As in Spain (and France and
    Italy) they charge for how much simultaneous current we use, we tend to minimize that usage, and flash electric heater do not have much of a market.

    But, you could schedule your usage, knowing when you will NEED the water
    and when other applications will compete for it or the energy that it requires.

    Many people have solar water (pre-)heaters, in this part of the country.
    Water exposed to the sun easily attains temperatures in excess of 100F
    (my last dip in a swimming pool had water temperature of 104 degrees).

    But, you're stuck scheduling your usage -- a "morning shower" wouldn't
    be as efficient as one "just after work".

    What I have seen in some hotels is have a hot water tank per room. Less instant
    current. Big houses could do the same thing.

    Yes. Big houses have to address "utilities" in many sites -- multiple
    HVAC units, water heaters, etc. Plumbing losses in 1/2" pipe (the standard
    for nominal homes) add up for long runs -- as do pressure drops from "side loads".

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Friday, November 20, 2026 00:56:02
    On 2026-11-19 22:13, Don Y wrote:
    On 11/19/2026 1:12 PM, Carlos E.R. wrote:
    The type of flash heater with proportional adjustment may have a
    small tank, less than 10 litres. Hot water is instant, on demand.
    Normal flash heaters have a delay, from a pair of seconds up to half
    a minute.

    I would have assumed that getting fast response from direct control
    of the
    heating element would be more difficult than altering the blend of
    heated
    and unheated water.

    ÿFrom experience (I sometimes go to another flat that has this system,
    in a colder city), once I adjust the temperature at the tap, I don't
    have to touch it during the shower, even if other person opens a tap
    at the house.

    Likely over-provisioned.

    ÿÿÿ Heck, after I saw a rocket stage landing back somewhere
    ÿÿÿ instead of crashing into the ocean, I stopped being surprised
    ÿÿÿ at what we can do.

    So the output temperature of the water is 45øC. You just further
    adjust at the tap blending some cold water.

    This particular heater main usage is to provide hot water to room
    radiators distributed around the flat to heat it up in winter, so it
    already has the gas regulation system. When you open a tap, it changes
    function instantly to heat the hot water tap. It is probably the most
    common house heating system employed in Spain.

    Growing up, we had an oil-fired furnace.ÿ The water jacket provided the circulating water for the baseboard heaters.

    Sadly, a heat exchanger that poked *into* the water jacket acted as
    our domestic hot water source.ÿ As a result, we had very little
    hot water.

    In every place I've lived in the intervening time, I have goosed
    the thermostat on the water heater to ensure I had "infinite"
    hot water (gradually decreasing the amount of unheated water
    mixed in to prolong the intensity of the shower)

    There are more expensive units that adjust the flow of gas
    dynamically, so that the water keeps a constant temperature,
    independent of entry temp and water flow rate. So it needs
    electrical power to run the adjustments. Summer, winter, one tap, >>>>>> two, half tap, full tap... no matter, the temperature is constant.
    It seems it would be easier to adjust temperature by controlling a
    mixing
    valve.ÿ Especially in cases where sudden drops in water pressure can >>>>> affect the output.

    Controlling the gas flow saves water and gas.

    The *tap* determines the amount of water used, regardless of what the
    water
    heater is doing.

    Yes and no...

    At my house, with a constant gas flow, if I open the tap more, I get
    colder

    Yes, but the AMOUNT of water consumed is governed by the tap.ÿ Control of
    the gas flow doesn't impact the amount of water consumed (except to the extent that the water dispensed isn't as desirable as you'd like)

    No, it is not. If I lower the amount of water, then the water is
    unbearable hot. I either choose the temperature, or the the amount.
    Obviously, I have to adjust for temperature in the shower. Then the
    amount of water is given, I have no control over it.

    This is what happens with a flash gas heater with constant gas flow.



    water. Less water, it is hotter. So the hot water tap must not be
    moved. From experience, it is best to put it at max flow, and adjust
    only with the cold

    That is what a mixing valve would do -- control the proportions of heated
    and unheated water being passed through.

    Think it over.

    If the water is too hot, with a mixing valve I decrease the hot water a
    bit, and increase the cold water a bit. But what happens at the flash
    heater, is that as there is less water flowing and the gas is constant,
    thus the hot water increases temperature proportionally. The result at
    the shower is that the temperature does not change. If first obeys you,
    and after half a minute it goes hot again.

    Trust me, I know. I have this system.


    I would buy a temperature continuously controlled flash heater, but I'm
    going to move to another house soon, so not my problem anymore. They are double or triple the cost for a reason...



    water. In summer, there is not enough water to cool it down. Even if I
    contract

    As our fixtures route heated and unheated water to each site, it is
    possible
    to have an entirely cold shower (where the value of "cold" is largely determined by the season as water flowing through buried pipes tends to be considerably warmer at end of Summer than at end of Winter)

    Yes, of course. I can close the hot water totally and use only cold
    water, no problem.


    ...


    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Don Y@3:633/10 to All on Thursday, November 19, 2026 17:41:53
    water. Less water, it is hotter. So the hot water tap must not be moved. >>> From experience, it is best to put it at max flow, and adjust only with the
    cold

    That is what a mixing valve would do -- control the proportions of heated
    and unheated water being passed through.

    Think it over.

    If the water is too hot, with a mixing valve I decrease the hot water a bit, and increase the cold water a bit. But what happens at the flash heater, is that as there is less water flowing and the gas is constant, thus the hot water
    increases temperature proportionally. The result at the shower is that the temperature does not change. If first obeys you, and after half a minute it goes hot again.

    But, a controller driving the valve would see this and react accordingly. Eventually, there is very little (or NONE!) SUPER HOT water flowing through
    the valve but a lot of COLD water working against it.

    The problem is the real-time control of the valve.

    When I take my hour-long showers, I am continuously adjusting the ratio
    of heated to unheated to keep the temperature as warm as I like it (until
    my rate of consumption exceeds the water heater's ability to keep up).
    Once the mixing valve is set to "full hot", I know my time is limited
    as there is nothing beyond that point that I can do to keep the temperature from falling.

    Trust me, I know. I have this system.

    I would buy a temperature continuously controlled flash heater, but I'm going
    to move to another house soon, so not my problem anymore. They are double or triple the cost for a reason...

    water. In summer, there is not enough water to cool it down. Even if I contract

    As our fixtures route heated and unheated water to each site, it is possible >> to have an entirely cold shower (where the value of "cold" is largely
    determined by the season as water flowing through buried pipes tends to be >> considerably warmer at end of Summer than at end of Winter)

    Yes, of course. I can close the hot water totally and use only cold water, no
    problem.
    That is the limiting case for a mixing valve control system. As closing off the *unheated* water is for my scenario, above.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Carlos E.R.@3:633/10 to All on Friday, November 20, 2026 13:20:19
    On 2026-11-20 01:41, Don Y wrote:
    water. Less water, it is hotter. So the hot water tap must not be
    moved. From experience, it is best to put it at max flow, and adjust
    only with the cold

    That is what a mixing valve would do -- control the proportions of
    heated
    and unheated water being passed through.

    Think it over.

    If the water is too hot, with a mixing valve I decrease the hot water
    a bit, and increase the cold water a bit. But what happens at the
    flash heater, is that as there is less water flowing and the gas is
    constant, thus the hot water increases temperature proportionally. The
    result at the shower is that the temperature does not change. If first
    obeys you, and after half a minute it goes hot again.

    But, a controller driving the valve would see this and react accordingly. Eventually, there is very little (or NONE!) SUPER HOT water flowing through the valve but a lot of COLD water working against it.

    No, a controller on the tap would not work.

    Think it over.

    The reaction to the status above would be to close the hot water a bit
    more, and open the cold water tap a bit more. After half a minute, the constant gas flow heats the slower water flow just a bit more, so the
    end result at the shower is the same as when we started: the water is
    too hot, same temperature as when we started.

    The reaction to this status would be to close the hot water a bit more,
    and open the cold water tap a bit more. After half a minute, the
    constant gas flow heats the slower water flow just a bit more, so the
    end result at the shower is the same as when we started: the water is
    too hot, same temperature as when we started.

    The reaction to this status would be to close the hot water a bit more,
    and open the cold water tap a bit more. After half a minute, the
    constant gas flow heats the slower water flow just a bit more, so the
    end result at the shower is the same as when we started: the water is
    too hot, same temperature as when we started.

    And now, the hot water flow is so small, that one of two things happens:

    - the electronics decide there is no enough hot water flow,
    and switches off the gas, suddenly. The shower suddenly
    becomes cold, instantly.

    - the safety thermostat at the output of the heater detects
    that the hot water is dangerously hot and switches off the
    gas, The shower suddenly becomes cold, instantly.


    Believe me, I have this type of flash heater and I know how it handles.
    It is impossible to control the temperature at the tap by touching the
    hot water valve. You have to leave alone the hot water tap, and adjust
    only the cold water tap.


    There is another strategy, which is leave the cold water tap alone, and control the hot water tap "in reverse". Close the hot water tap a bit
    knowing that the water will become hotter after half a minute. It is not intuitive. The manufacturer mentions this method in the instructions.



    --
    Cheers, Carlos.
    ES??, EU??;

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Nioclásán Cóilín Glostéir@3:633/10 to All on Saturday, November 21, 2026 17:59:41
    Martin Brown <'''newspam'''@Nonad.co.UK> wrote: |---------------------------------------------------------------|
    |"On 14/11/2026 03:56, Don Y wrote: |
    |[. . .] |
    Shoot the engineer?ÿ Or, the clown who specified the system??|
    | |
    |I expect the engineers [. . .] |
    |were overruled by the bean counters and the management suits." | |---------------------------------------------------------------|

    Cf. Ariane 501.
    (S. HTTP://Gloucester.Insomnia247.NL/ fuer Kontaktdaten!)

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)