On Sat, 21 Nov 2026 15:29:52 -0500
<
covici@ccs.covici.com> wrote:
Hi all. I have been using gentoo for years, but its getting to be
too much work, so I would like some advise on switching to Debian
which I used to use years ago and still use on some of my systems.
I have an empty disk I have connected by usb I can use for this
purpose. Some of the possible gotchas are that I want to use zfs on
my new system and use some of the zfs pools I already have, the pools
that are not part of the boot. I know its going to be a pita, but
the system I have is quite broken, so I think its time to switch and
start from scratch.
I can't say I've used Gentoo. I have, however, tried installing it, and
that is a major PITA.
I suggest you avoid testing. Stable (trixie) is, well, more stable. You
don't need the problems that what amounts to a rolling distribution can provide.
You should be able to install Debian to an external USB drive. It will
be slower simply because you are going over the USB interface rather
than SATA or NVME. If you are leaving your existing installation
intact, you might share its swap partition between the two
installations to get that little bit of speed.
First, make sure the firmware on the computer's motherboard will boot
to that drive. You will probably be best off with the netinst
installer. You may have to use the expert mode to select the USB drive.
Just be careful you don't partition the wrong drive!
I can't help you with the zfs stuff, sorry.
--
Does anybody read signatures any more?
https://charlescurley.com
https://charlescurley.com/blog/
--- PyGate Linux v1.5.19
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)