• Re: Increase DDR3 memory frequency

    From Marco Moock@3:633/10 to All on Friday, October 09, 2026 16:40:01
    Am 09.10.26 um 15:30 schrieb Franco Martelli:
    I want to increase performance of my PC, the "inxi" command says about
    the PC's memory:

    ~$ inxi -m
    Memory:
    ˙ System RAM: total: 16 GiB available: 15.38 GiB used: 3.23 GiB (21.0%)
    ˙ Array-1: capacity: 32 GiB slots: 4 modules: 4 EC: None
    ˙ Device-1: DIMM0 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    ˙˙˙ actual: 933 MT/s
    ˙ Device-2: DIMM1 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    ˙˙˙ actual: 933 MT/s
    ˙ Device-3: DIMM2 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    ˙˙˙ actual: 933 MT/s
    ˙ Device-4: DIMM3 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    ˙˙˙ actual: 933 MT/s

    is it possible to set "actual:" from 933 MT/s to 1866 MT/s? Why it is
    933 MT/s?
    The motherboard is:

    It is possible to increase the DRAM frequency in the UEFI/BIOS setup.

    --
    Gruá
    Marco

    Spam bitte an abfalleimer2001@stinkedores.dorfdsl.de

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Felix Miata@3:633/10 to All on Friday, October 09, 2026 20:40:02
    Franco Martelli composed on 2026-10-09 15:26 (UTC+0200):

    I want to increase performance of my PC, the "inxi" command says about
    the PC's memory:

    ~$ inxi -m
    Memory:
    System RAM: total: 16 GiB available: 15.38 GiB used: 3.23 GiB (21.0%)
    Array-1: capacity: 32 GiB slots: 4 modules: 4 EC: None
    Device-1: DIMM0 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    actual: 933 MT/s
    Device-2: DIMM1 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    actual: 933 MT/s
    Device-3: DIMM2 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    actual: 933 MT/s
    Device-4: DIMM3 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    actual: 933 MT/s

    is it possible to set "actual:" from 933 MT/s to 1866 MT/s? Why it is
    933 MT/s?
    The motherboard is:

    ~$ inxi -M
    Machine:
    Type: Desktop Mobo: ASUSTeK model: M5A99X EVO R2.0 v: Rev 1.xx
    serial: <superuser required> BIOS: American Megatrends v: 2103
    date: 11/07/2013

    The filename of the PDF handbook is "E8044_M5A99X_EVO_R2.PDF", sadly I cannot copy text from the PDF handbook cause DRM rights protection,
    however the motherboard has the EPU (Energy Processing Unit) switch ON
    could that be the cause? It was OFF.

    Which Debian are you running?

    Which version of inxi is yours?

    $ inxi --vs
    inxi 3.3.41-00 (2026-07-01) https://smxi.org/docs/inxi-installation.htm#inxi-manual-install
    $

    Devel latest:
    $ pinxi --vs
    pinxi 3.3.41-05 (2026-08-19)
    $

    pinxi is inxi's devel version (link=pinxi script only, no other files comprising):
    https://codeberg.org/smxi/pinxi/raw/branch/master/pinxi

    # pinxi -ma --vs --za
    pinxi 3.3.41-05 (2026-08-19)
    Memory:
    System RAM: total: 32 GiB available: 30.81 GiB used: 11 GiB (35.7%)
    igpu: 512 MiB
    Array-1: capacity: 64 GiB slots: 4 modules: 4 EC: None
    max-module-size: 16 GiB note: est.
    Device-1: ChannelA-DIMM0 type: DDR4 detail: synchronous size: 8 GiB
    speed: 2400 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits): data: 64
    total: 64 manufacturer: 0000 part-no: N/A serial: <filter>
    Device-2: ChannelA-DIMM1 type: DDR4 detail: synchronous size: 8 GiB
    speed: 2400 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits): data: 64
    total: 64 manufacturer: Crucial part-no: CT8G4DFD824A.M16FF
    serial: <filter>
    Device-3: ChannelB-DIMM0 type: DDR4 detail: synchronous size: 8 GiB
    speed: 2400 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits): data: 64
    total: 64 manufacturer: 0000 part-no: N/A serial: <filter>
    Device-4: ChannelB-DIMM1 type: DDR4 detail: synchronous size: 8 GiB
    speed: 2400 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits): data: 64
    total: 64 manufacturer: Crucial part-no: CT8G4DFD824A.M16FF
    serial: <filter>
    #
    --
    Evolution as taught in public schools is, like religion,
    based on faith, not based on science.

    Team OS/2 ** Reg. Linux User #211409 ** a11y rocks!

    Felix Miata

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Marco Moock@3:633/10 to All on Friday, October 09, 2026 21:20:01
    Am 09.10.26 um 19:20 schrieb Franco Martelli:
    So do I have a DRAM misconfiguration it the BIOS on my machine because "actual" value doesn't match the "spec" value? Correct?

    There are various reasons like default settings or supported speeds of
    certain modules or memory configurations (there are controllers that do
    not support the max speed with all modules installed etc.).

    Read the motherboard manual and test the higher frequency.
    If it does not work, set it back to the slower one.

    --
    Gruá
    Marco

    Spam bitte an abfalleimer2001@stinkedores.dorfdsl.de

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Felix Miata@3:633/10 to All on Saturday, October 10, 2026 21:00:02
    Franco Martelli composed on 2026-10-09 15:26 (UTC+0200)

    Device-1: DIMM0 type: DDR3 size: 4 GiB speed: spec: 1866 MT/s
    ...
    Type: Desktop Mobo: ASUSTeK model: M5A99X EVO R2.0 v: Rev 1.xx
    ...
    Given the manual for that motherboard claims standard support for up to 1866, and
    the modules the same 1866, I wouldn't settle for less than 1600 forced via BIOS setup. The slowest speed claimed supported is 1066, much better than 933.

    However, if you have a 100 series CPU, then according to the manual, the fastest
    supported is 1333. If this is the case, you can probably find and install a better
    CPU used and realize a lot better performance both from RAM and CPU.
    --
    Evolution as taught in public schools is, like religion,
    based on faith, not based on science.

    Team OS/2 ** Reg. Linux User #211409 ** a11y rocks!

    Felix Miata

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Anssi Saari@3:633/10 to All on Tuesday, October 13, 2026 14:20:01
    Franco Martelli <martellif67@gmail.com> writes:

    ~# dmidecode -t memory | grep -E "Bank|Speed"

    on its PC? Apologies if I asked to an LLM tool I prefer to talk with
    humans instead of machines but since it was available...

    This is from my router:

    # dmidecode -t memory | grep -E "Bank|Speed"
    Bank Locator: CHANNEL A
    Speed: 1333 MT/s
    Configured Memory Speed: 1333 MT/s

    I think your issue is just reporting wrong units. With DDR memory 1866
    MT/s means 933 MHz. Getting things wrong in reports is common and
    especially this is a common issue. Former Anandtech writer Dr. Ian
    Cutress used to carp about this but generally nobody bothers to care
    about the difference.

    For example, for said router inxi -m claims there's one DIMM of memory
    but in fact there are no DIMMs, RAM is soldered directly on the
    motherboard. Probably hard to figure that out by software.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)