• Re: APDL, 100% of 63% back from the dead

    From Harriet Bazley@3:633/10 to All on Tuesday, October 13, 2026 23:17:21
    On 12 Oct 2026 as I do recall,
    VirtualAcorn wrote:

    I apologise for the long delay in sending this message but after many thousands of hours work a significant range of APDL software is now available from:

    https://www.riscos.com/apdl

    [snip]


    So we invite readers to pop along to the new APDL and see if there is something you would like from the 46 currently available titles (some
    are compilations which include several applications bundled together as
    one download).

    I tried NightSky, which sounded interesting - I'm assuming the site uses
    some filename protocol which is not supported by NetSurf, because the
    download link simply gave me a data file called 'download/php".

    Renaming that and setting the filetype to Zip allowed me to 'install'
    the application, which produced a copy in the specified destination
    directory, but I wasn't able to get it actually to run even after
    changing into a 256-colour desktop mode; I just get "Not enough memory
    to create sprite" errors, presumably because there is *too much* free
    memory rather than not enough.

    I tried running NightSky under Aemulor in order to limit the available
    memory visible to it, but that just gave me "Abort on data transfer"
    errors. :-(

    --
    Harriet Bazley == Loyaulte me lie ==

    Joseph Stalin's grave was a Communist Plot.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Wednesday, October 14, 2026 20:09:38
    In message <3e5c55275d.harriet@bazleyfamily.co.uk>
    Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:

    On 12 Oct 2026 as I do recall,
    VirtualAcorn wrote:

    I apologise for the long delay in sending this message but after many
    thousands of hours work a significant range of APDL software is now
    available from:

    https://www.riscos.com/apdl

    [snip]


    So we invite readers to pop along to the new APDL and see if there is
    something you would like from the 46 currently available titles (some
    are compilations which include several applications bundled together as
    one download).

    I tried NightSky, which sounded interesting - I'm assuming the site uses
    some filename protocol which is not supported by NetSurf, because the download link simply gave me a data file called 'download/php".
    You can drag it on iconbar SparkFS

    Renaming that and setting the filetype to Zip allowed me to 'install'
    the application, which produced a copy in the specified destination directory, but I wasn't able to get it actually to run even after
    changing into a 256-colour desktop mode; I just get "Not enough memory
    to create sprite" errors, presumably because there is *too much* free
    memory rather than not enough.
    It' an old program for Risc 2.00
    I tried running NightSky under Aemulor in order to limit the available
    memory visible to it, but that just gave me "Abort on data transfer"
    errors. :-(

    It looks a lot like the Rhapsody4 version, it's a Basic program....to
    update, not easy, but I like astronomy.


    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Harriet Bazley@3:633/10 to All on Wednesday, October 14, 2026 21:23:14
    On 14 Oct 2026 as I do recall,
    Jean-Michel wrote:

    Renaming that and setting the filetype to Zip allowed me to 'install'
    the application, which produced a copy in the specified destination directory, but I wasn't able to get it actually to run even after
    changing into a 256-colour desktop mode; I just get "Not enough memory
    to create sprite" errors, presumably because there is *too much* free memory rather than not enough.
    It' an old program for Risc 2.00

    The help file in the app itself says that "We now assume all users have
    Risc Os 3.10 or greater" and "This version is compatible with RISC OS
    4" while warning you that you will need to change down to a 256-colour
    mode - it doesn't say anything about RISC OS 5, of course....

    --
    Harriet Bazley == Loyaulte me lie ==

    It is better to wear out than to rust.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Brian Howlett@3:633/10 to All on Wednesday, October 14, 2026 22:26:49
    On 12 Oct, VirtualAcorn <atimbrell@aol.com> wrote:

    I apologise for the long delay in sending this message but after many thousands of hours work a significant range of APDL software is now
    available from:

    https://www.riscos.com/apdl

    I downloaded a new copy of EasyFontPro to try updating my current version (5.18) but the new(?) version errors when trying to run it.

    Not sure what version I have downloaded - a useful idea would be to show version numbers of the software on the site.

    These are the errors from the last 3 attempts to run it:

    14 Oct 00:01:50 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20313B68 : internal error code : 7
    14 Oct 00:01:54 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20326188 : internal error code : 7
    14 Oct 22:13:02 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20313A28 : internal error code : 7

    As you can see, the location of the undefined instruction varies:

    *where &20313B68
    Address &20313B68 is at offset &00313B68 in dynamic area 'Module area'
    *where &20326188
    Address &20326188 is at offset &00326188 in dynamic area 'Module area'
    *where &20313A28
    Address &20313A28 is at offset &00313A28 in dynamic area 'Module area'

    Using RO 5.21 on N.Ex.T Machine from R-Comp.
    --
    Brian Howlett - Email to From: address deleted unseen -----------------------------------------------------
    My net income doesn't cover my gross habits...

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Dave@3:633/10 to All on Thursday, October 15, 2026 08:29:21
    In article <f091d4275d.BrianNews@brianhowlett.me.uk>,
    Brian Howlett <news-spamtrap@brianhowlett.me.uk> wrote:
    On 12 Oct, VirtualAcorn <atimbrell@aol.com> wrote:

    I apologise for the long delay in sending this message but after many thousands of hours work a significant range of APDL software is now available from:

    https://www.riscos.com/apdl

    I downloaded a new copy of EasyFontPro to try updating my current
    version (5.18) but the new(?) version errors when trying to run it.

    Not sure what version I have downloaded - a useful idea would be to show version numbers of the software on the site.

    These are the errors from the last 3 attempts to run it:

    14 Oct 00:01:50 003 00000000: Error outside EasyFont#Pro: Internal
    error: undefined instruction at &20313B68 : internal error code : 7 14
    Oct 00:01:54 003 00000000: Error outside EasyFont#Pro: Internal error: undefined instruction at &20326188 : internal error code : 7 14 Oct
    22:13:02 003 00000000: Error outside EasyFont#Pro: Internal error:
    undefined instruction at &20313A28 : internal error code : 7

    As you can see, the location of the undefined instruction varies:

    *where &20313B68 Address &20313B68 is at offset &00313B68 in dynamic
    area 'Module area' *where &20326188 Address &20326188 is at offset
    &00326188 in dynamic area 'Module area' *where &20313A28 Address
    &20313A28 is at offset &00313A28 in dynamic area 'Module area'

    Using RO 5.21 on N.Ex.T Machine from R-Comp.

    The new version from APDL is 5.20 (21 may 2026)

    This works okay on my VRPC-DL RISC OS 6.20

    But it will not work on my RPCEmu 0.9.4 Running RISC OS 5.31.

    The older EFP 5.18u which I also have installed on the RPCEmu works okay.

    Dave

    --

    Dave Triffid

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Thursday, October 15, 2026 10:38:19
    In message <b9bfce275d.harriet@bazleyfamily.co.uk>
    Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:

    On 14 Oct 2026 as I do recall,
    Jean-Michel wrote:

    Renaming that and setting the filetype to Zip allowed me to 'install'
    the application, which produced a copy in the specified destination
    directory, but I wasn't able to get it actually to run even after
    changing into a 256-colour desktop mode; I just get "Not enough memory
    to create sprite" errors, presumably because there is *too much* free
    memory rather than not enough.
    It' an old program for Risc 2.00

    The help file in the app itself says that "We now assume all users have
    Risc Os 3.10 or greater" and "This version is compatible with RISC OS
    4" while warning you that you will need to change down to a 256-colour
    mode - it doesn't say anything about RISC OS 5, of course....

    Yes, Rhapsody4 was sold as compatible...now it works great for my needs.



    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Thursday, October 15, 2026 10:58:57
    In message <f091d4275d.BrianNews@brianhowlett.me.uk>
    Brian Howlett <news-spamtrap@brianhowlett.me.uk> wrote:

    On 12 Oct, VirtualAcorn <atimbrell@aol.com> wrote:

    I apologise for the long delay in sending this message but after many
    thousands of hours work a significant range of APDL software is now
    available from:

    https://www.riscos.com/apdl

    I downloaded a new copy of EasyFontPro to try updating my current version (5.18) but the new(?) version errors when trying to run it.

    Not sure what version I have downloaded - a useful idea would be to show version numbers of the software on the site.

    These are the errors from the last 3 attempts to run it:

    14 Oct 00:01:50 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20313B68 : internal error code : 7
    14 Oct 00:01:54 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20326188 : internal error code : 7
    14 Oct 22:13:02 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20313A28 : internal error code : 7

    As you can see, the location of the undefined instruction varies:

    *where &20313B68
    Address &20313B68 is at offset &00313B68 in dynamic area 'Module area'
    *where &20326188
    Address &20326188 is at offset &00326188 in dynamic area 'Module area'
    *where &20313A28
    Address &20313A28 is at offset &00313A28 in dynamic area 'Module area'

    Using RO 5.21 on N.Ex.T Machine from R-Comp.

    !RunImage is not compatible with CM4 processor.

    I had to make some "corrections" to make it compatible. https://jeanmichelb.riscos.fr/Temp/EasyProRunImage.zip

    I am interested in knowing if the software is completely functional, the license remains with APDL

    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Brian Howlett@3:633/10 to All on Thursday, October 15, 2026 22:02:51
    On 15 Oct, Jean-Michel <jmc.bruck@orange.fr> wrote:

    !RunImage is not compatible with CM4 processor.

    I had to make some "corrections" to make it compatible. https://jeanmichelb.riscos.fr/Temp/EasyProRunImage.zip

    I am interested in knowing if the software is completely functional, the license remains with APDL

    Still not working here, but a different error:

    15 Oct 21:58:56 003 00000000: Error outside EasyFont?Pro: Internal error: abort on instruction fetch at &21D46C88 : internal error code : 8

    *where &21D46C88
    Address &21D46C88 is at offset &01D46C88 in dynamic area 'Module area'
    --
    Brian Howlett - Email to From: address deleted unseen ---------------------------------------------------------------------
    "Are you the Prime Minister?" "No, but I've often been mistaken."
    "What, for the Prime Minister?" "No. I've just often been mistaken..."

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Friday, October 16, 2026 10:58:29
    In message <393656285d.BrianNews@brianhowlett.me.uk>
    Brian Howlett <news-spamtrap@brianhowlett.me.uk> wrote:

    On 15 Oct, Jean-Michel <jmc.bruck@orange.fr> wrote:

    !RunImage is not compatible with CM4 processor.

    I had to make some "corrections" to make it compatible.
    https://jeanmichelb.riscos.fr/Temp/EasyProRunImage.zip

    I am interested in knowing if the software is completely functional, the
    license remains with APDL

    Still not working here, but a different error:

    15 Oct 21:58:56 003 00000000: Error outside EasyFont?Pro: Internal error: abort on instruction fetch at &21D46C88 : internal error code : 8

    *where &21D46C88
    Address &21D46C88 is at offset &01D46C88 in dynamic area 'Module area'

    On my machine the program launches and I get the application window, but I admit that I haven't done any other tests. The manual is displayed
    correctly.

    I will continue testing, with an ARMx6 it seems to me that it works
    correctly. Maybe you can also update the OS => 5.31

    Thanks for testing.

    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Dave@3:633/10 to All on Friday, October 16, 2026 15:02:07
    In article <0ebb97285d.jmb@jmc.bruck.orange.fr>,
    Jean-Michel <jmc.bruck@orange.fr> wrote:
    In message <393656285d.BrianNews@brianhowlett.me.uk>
    Brian Howlett <news-spamtrap@brianhowlett.me.uk> wrote:

    On 15 Oct, Jean-Michel <jmc.bruck@orange.fr> wrote:

    !RunImage is not compatible with CM4 processor.

    I had to make some "corrections" to make it compatible.
    https://jeanmichelb.riscos.fr/Temp/EasyProRunImage.zip

    I am interested in knowing if the software is completely functional,
    the license remains with APDL

    Still not working here, but a different error:

    15 Oct 21:58:56 003 00000000: Error outside EasyFont?Pro: Internal
    error: abort on instruction fetch at &21D46C88 : internal error code :
    8

    *where &21D46C88 Address &21D46C88 is at offset &01D46C88 in dynamic
    area 'Module area'

    On my machine the program launches and I get the application window, but
    I admit that I haven't done any other tests. The manual is displayed correctly.

    I will continue testing, with an ARMx6 it seems to me that it works correctly. Maybe you can also update the OS => 5.31

    Thanks for testing.

    FWIW. I tried your new Runimage on my RPCEmu 0.9.4 and RISC OS 5.31 and it still errored out...

    From Reporter:

    14:54:35.24 [WindowManager/] Obey HostFS::HostFS.$.TransDir.!EasyPro.!Run 14:54:35.76 ** Error **
    Error : &80000001
    Message: Internal error: abort on instruction fetch at &21C56CE8
    14:54:35.76 ** WimpError ** from Error outside EasyFont Pro
    Error : &00000000
    Message: Internal error: abort on instruction fetch at &21C56CE8 :
    internal error code : 8
    14:55:18.14 TaskClose &7EE03A1C
    14:55:18.14 TaskInit &7EE03A1C EasyFont Pro CAO FC1801E0 Slot
    800K


    Worth noting, old EFP 5.18u works okay on this RISC OS 5.31.

    Dave

    --

    Dave Triffid

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Friday, October 16, 2026 15:43:42
    In article <5d28b38762dave@triffid.co.uk>,
    Dave <dave@triffid.co.uk> wrote:

    [Snip]

    FWIW. I tried your new Runimage on my RPCEmu 0.9.4 and RISC OS 5.31
    and it still errored out...

    From Reporter:

    14:54:35.24 [WindowManager/] Obey HostFS::HostFS.$.TransDir.!EasyPro.!Run 14:54:35.76 ** Error **
    Error : &80000001
    Message: Internal error: abort on instruction fetch at &21C56CE8 14:54:35.76 ** WimpError ** from Error outside EasyFont Pro
    Error : &00000000
    Message: Internal error: abort on instruction fetch at &21C56CE8 :
    internal error code : 8
    14:55:18.14 TaskClose &7EE03A1C
    14:55:18.14 TaskInit &7EE03A1C EasyFont Pro CAO FC1801E0
    Slot 800K

    What then does *ReportWhere say? (command or menu)
    That will try to identify a module and an offset, and register values,
    if it can.

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Dave@3:633/10 to All on Friday, October 16, 2026 20:11:46
    In article <5d28b755fdNews04@avisoft.f9.co.uk>,
    Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5d28b38762dave@triffid.co.uk>,
    Dave <dave@triffid.co.uk> wrote:

    [Snip]

    FWIW. I tried your new Runimage on my RPCEmu 0.9.4 and RISC OS 5.31
    and it still errored out...

    From Reporter:

    14:54:35.24 [WindowManager/] Obey
    HostFS::HostFS.$.TransDir.!EasyPro.!Run 14:54:35.76 ** Error **
    Error : &80000001
    Message: Internal error: abort on instruction fetch at &21C56CE8 14:54:35.76 ** WimpError ** from Error outside EasyFont Pro
    Error : &00000000
    Message: Internal error: abort on instruction fetch at &21C56CE8 : internal error code : 8
    14:55:18.14 TaskClose &7EE03A1C
    14:55:18.14 TaskInit &7EE03A1C EasyFont Pro CAO FC1801E0
    Slot 800K

    What then does *ReportWhere say? (command or menu)
    That will try to identify a module and an offset, and register values,
    if it can.


    Is this what you mean?
    Dave


    Reporter 2.74 (01 Aug 2021) List Fri 16th Oct 2026 19:59

    19:58:25.26 ** Clear ** from Menu
    19:58:33.91 TaskClose &7CE03A1C
    19:58:33.91 [WindowManager/] Obey HostFS::HostFS.$.TransDir.!EasyPro.!Run 19:58:34.59 ** Error **
    Error : &80000001
    Message: Internal error: abort on instruction fetch at &21C58A68
    19:58:34.59 ** WimpError ** from Error outside EasyFont Pro
    Error : &00000000
    Message: Internal error: abort on instruction fetch at &21C58A68 :
    internal error code : 8
    19:58:37.97 TaskClose &7D003A1C
    19:58:37.98 TaskInit &7D003A1C EasyFont Pro CAO FC1801E0 Slot
    800K
    Address &21C58A6C is not in any module.
    Register dump (at &2000D2F0) is:
    pc = &21C58A6C Flags=&20000010=nzCv if Mode=User 32 bit
    r0 = &00041000 : .... : 266240
    r1 = &0008F000 : .?.. : 585728
    r2 = &A17EBE6C : l?~? : 2709438060
    r3 = &08353285 : ?25. : 137704069
    r4 = &CF1F01D1 : ?..? : 3474915793
    r5 = &00000001 : .... : 1
    r6 = &F2CBB46F : o??? : 4073436271
    r7 = &00000298 : ?... : 664 => &FC009BB4 : ??.? : 4227898292
    r8 = &00008700 : .?.. : 34560
    r9 = &00040FD8 : ?... : 266200
    r10 = &00000000 : .... : 0 => &E59FF488 : ???? : 3852465288
    r11 = &00008100 : .?.. : 33024
    r12 = &00009033 : 3?.. : 36915
    r13 = &00040FC0 : ?... : 266176
    r14 = &FC1894E0 : ??.? : 4229469408 => &EAFFFFF5 : ?..? : 3942645749
    Code around address is:
    21C58A34 : Invalid address

    Reporter 2.74 (01 Aug 2021) Listed 31 lines

    --

    Dave Triffid

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Friday, October 16, 2026 23:29:15
    In article <5d28cfdf10dave@triffid.co.uk>,
    Dave <dave@triffid.co.uk> wrote:
    In article <5d28b755fdNews04@avisoft.f9.co.uk>,
    Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5d28b38762dave@triffid.co.uk>,
    Dave <dave@triffid.co.uk> wrote:

    [Snip]

    FWIW. I tried your new Runimage on my RPCEmu 0.9.4 and RISC OS 5.31
    and it still errored out...

    From Reporter:

    14:54:35.24 [WindowManager/] Obey
    HostFS::HostFS.$.TransDir.!EasyPro.!Run 14:54:35.76 ** Error **
    Error : &80000001
    Message: Internal error: abort on instruction fetch at &21C56CE8 14:54:35.76 ** WimpError ** from Error outside EasyFont Pro
    Error : &00000000
    Message: Internal error: abort on instruction fetch at &21C56CE8 : internal error code : 8
    14:55:18.14 TaskClose &7EE03A1C
    14:55:18.14 TaskInit &7EE03A1C EasyFont Pro CAO FC1801E0
    Slot 800K

    What then does *ReportWhere say? (command or menu)
    That will try to identify a module and an offset, and register values,
    if it can.


    Is this what you mean?
    Dave


    Reporter 2.74 (01 Aug 2021) List Fri 16th Oct 2026 19:59

    19:58:25.26 ** Clear ** from Menu
    19:58:33.91 TaskClose &7CE03A1C
    19:58:33.91 [WindowManager/] Obey HostFS::HostFS.$.TransDir.!EasyPro.!Run 19:58:34.59 ** Error **
    Error : &80000001
    Message: Internal error: abort on instruction fetch at &21C58A68 19:58:34.59 ** WimpError ** from Error outside EasyFont Pro
    Error : &00000000
    Message: Internal error: abort on instruction fetch at &21C58A68 :
    internal error code : 8
    19:58:37.97 TaskClose &7D003A1C
    19:58:37.98 TaskInit &7D003A1C EasyFont Pro CAO FC1801E0 Slot
    800K
    Address &21C58A6C is not in any module.
    Register dump (at &2000D2F0) is:
    pc = &21C58A6C Flags=&20000010=nzCv if Mode=User 32 bit
    r0 = &00041000 : .... : 266240
    r1 = &0008F000 : .?.. : 585728
    r2 = &A17EBE6C : l?~? : 2709438060
    r3 = &08353285 : ?25. : 137704069
    r4 = &CF1F01D1 : ?..? : 3474915793
    r5 = &00000001 : .... : 1
    r6 = &F2CBB46F : o??? : 4073436271
    r7 = &00000298 : ?... : 664 => &FC009BB4 : ??.? : 4227898292
    r8 = &00008700 : .?.. : 34560
    r9 = &00040FD8 : ?... : 266200
    r10 = &00000000 : .... : 0 => &E59FF488 : ???? : 3852465288
    r11 = &00008100 : .?.. : 33024
    r12 = &00009033 : 3?.. : 36915
    r13 = &00040FC0 : ?... : 266176
    r14 = &FC1894E0 : ??.? : 4229469408 => &EAFFFFF5 : ?..? : 3942645749
    Code around address is:
    21C58A34 : Invalid address

    Reporter 2.74 (01 Aug 2021) Listed 31 lines

    That is what I meant ... but it just indicates that something
    originating in BASIC has made a wild branch into something that is not
    code, and certainly not a module. So no direct help, I am afraid.

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Saturday, October 17, 2026 10:42:32
    In message <5d28e1f379News04@avisoft.f9.co.uk>
    Martin <News04@avisoft.f9.co.uk> wrote:



    Reporter 2.74 (01 Aug 2021) Listed 31 lines

    That is what I meant ... but it just indicates that something
    originating in BASIC has made a wild branch into something that is not
    code, and certainly not a module. So no direct help, I am afraid.

    Yes, Martin you are right, the program is largely in Basic, I am trying to make it work, but it is not easy, because you must not forget anything...
    I test and correct. The !RunImage provided is not correct, although it
    loads correctly, it crashes very easily.


    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Saturday, October 17, 2026 18:22:59
    In article <eb1a1a295d.jmb@jmc.bruck.orange.fr>,
    Jean-Michel <jmc.bruck@orange.fr> wrote:
    In message <5d28e1f379News04@avisoft.f9.co.uk>
    Martin <News04@avisoft.f9.co.uk> wrote:

    Re EasyFontPro problems

    That is what I meant ... but it just indicates that something
    originating in BASIC has made a wild branch into something that
    is not code, and certainly not a module. So no direct help, I am
    afraid.

    Yes, Martin you are right, the program is largely in Basic, I am
    trying to make it work, but it is not easy, because you must not
    forget anything... I test and correct. The !RunImage provided is
    not correct, although it loads correctly, it crashes very easily.

    I looked in detail at EFP way back in 2012, trying to resolve some
    problems I had found. I discovered quite a number of issues
    inconsistencies, and made over 30 changes in both the BASIC and the
    modules, but never managed to report them to David Holden
    unfortunately, so I stopped the work.

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Sunday, October 18, 2026 16:53:44
    In message <5d2949c12fNews04@avisoft.f9.co.uk>
    Martin <News04@avisoft.f9.co.uk> wrote:

    In article <eb1a1a295d.jmb@jmc.bruck.orange.fr>,
    Jean-Michel <jmc.bruck@orange.fr> wrote:
    In message <5d28e1f379News04@avisoft.f9.co.uk>
    Martin <News04@avisoft.f9.co.uk> wrote:

    Re EasyFontPro problems

    That is what I meant ... but it just indicates that something
    originating in BASIC has made a wild branch into something that
    is not code, and certainly not a module. So no direct help, I am
    afraid.

    Yes, Martin you are right, the program is largely in Basic, I am
    trying to make it work, but it is not easy, because you must not
    forget anything... I test and correct. The !RunImage provided is
    not correct, although it loads correctly, it crashes very easily.

    I looked in detail at EFP way back in 2012, trying to resolve some
    problems I had found. I discovered quite a number of issues
    inconsistencies, and made over 30 changes in both the BASIC and the
    modules, but never managed to report them to David Holden
    unfortunately, so I stopped the work.

    Martin, it's a rather difficult exercise, between Basic and the modules
    which generate an error, without counting those specific to the code. Too
    bad because it's a good font manager.

    What is also a shame is that APDL has the source, the date in the Basic
    code to change (2026) but nothing is done so that we can put it in version 5.xx of the OS. It would be much better than tinkering and that takes a
    lot of time.
    :-(

    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Bernard Boase@3:633/10 to All on Thursday, October 29, 2026 11:52:52
    On 13 Oct 2026, harriet@bazleyfamily.co.uk wrote:

    https://www.riscos.com/apdl

    I tried NightSky, which sounded interesting - I'm assuming the site uses
    some filename protocol which is not supported by NetSurf, because the download link simply gave me a data file called 'download/php".

    By the way, a downloaded file like that just has to be dragged to
    SparkFS's icon bar icon since SparkFS will recognise that it can be
    unzipped, and does so.

    I do wonder if the APDL collection has undergone any testing on current systems. Any need for Aemulor or a particular version of the OS (for
    example) isn't mentioned, is it?

    Bernard
    --
    b.boase@bcs.org

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Hughes@3:633/10 to All on Friday, October 30, 2026 12:12:13
    In message <2d90592f5d.boase@bernard>
    Bernard Boase <bernard@boase.myzen.co.uk> wrote:

    On 13 Oct 2026, harriet@bazleyfamily.co.uk wrote:

    https://www.riscos.com/apdl

    I tried NightSky, which sounded interesting - I'm assuming the site uses
    some filename protocol which is not supported by NetSurf, because the
    download link simply gave me a data file called 'download/php".

    By the way, a downloaded file like that just has to be dragged to
    SparkFS's icon bar icon since SparkFS will recognise that it can be
    unzipped, and does so.

    I do wonder if the APDL collection has undergone any testing on current systems. Any need for Aemulor or a particular version of the OS (for
    example) isn't mentioned, is it?

    Yes it has if you look on each page of the software on the left hand bar
    is a compatibility table of what has been tested as far as possible.



    --
    Chris Hughes

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Paul Stewart@3:633/10 to All on Friday, November 20, 2026 17:02:49
    In message <3e5c55275d.harriet@bazleyfamily.co.uk>
    Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:

    On 12 Oct 2026 as I do recall,
    VirtualAcorn wrote:

    I apologise for the long delay in sending this message but after many
    thousands of hours work a significant range of APDL software is now
    available from:

    https://www.riscos.com/apdl

    [snip]


    So we invite readers to pop along to the new APDL and see if there is
    something you would like from the 46 currently available titles (some
    are compilations which include several applications bundled together as
    one download).

    I tried NightSky, which sounded interesting - I'm assuming the site uses
    some filename protocol which is not supported by NetSurf, because the download link simply gave me a data file called 'download/php".

    Renaming that and setting the filetype to Zip allowed me to 'install'
    the application, which produced a copy in the specified destination directory, but I wasn't able to get it actually to run even after
    changing into a 256-colour desktop mode; I just get "Not enough memory
    to create sprite" errors, presumably because there is *too much* free
    memory rather than not enough.

    I tried running NightSky under Aemulor in order to limit the available
    memory visible to it, but that just gave me "Abort on data transfer"
    errors. :-(

    Downloaded it and unpacked with SparkFS
    Works fine here.
    Just had to switch to a 256 colour mode

    --
    Paul Stewart
    Sent from A9home running RISC OS 4.42

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Harriet Bazley@3:633/10 to All on Friday, November 20, 2026 21:16:53
    On 20 Nov 2026 as I do recall,
    Paul Stewart wrote:

    In message <3e5c55275d.harriet@bazleyfamily.co.uk>
    Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:


    I tried NightSky, which sounded interesting - I'm assuming the site uses
    some filename protocol which is not supported by NetSurf, because the
    download link simply gave me a data file called 'download/php".

    Renaming that and setting the filetype to Zip allowed me to 'install'
    the application, which produced a copy in the specified destination
    directory, but I wasn't able to get it actually to run even after
    changing into a 256-colour desktop mode; I just get "Not enough memory
    to create sprite" errors, presumably because there is *too much* free
    memory rather than not enough.

    I tried running NightSky under Aemulor in order to limit the available
    memory visible to it, but that just gave me "Abort on data transfer"
    errors. :-(

    Downloaded it and unpacked with SparkFS
    Works fine here.
    Just had to switch to a 256 colour mode

    That may be a RISC OS 4 versus RISC OS 5 thing, then.
    If I run the application in a non-256-colour mode, I get

    21:10:29.10 ** WimpError ** from NightSky
    Error : &00000063
    Message: Mask or Palette operations not supported in this display depth

    If I switch to a 256-colour mode, I get

    21:10:43.74 ** WimpError ** from NightSky
    Error : &00000063
    Message: Not enough memory to create sprite

    If I run !NightSky via Aemulor, I get

    21:11:14.90 ** WimpError ** from Message from NightSky
    Error : &80000002
    Message: Internal error: abort on data transfer at &0212E280 : Code -2

    --
    Harriet Bazley == Loyaulte me lie ==

    It's clever, but is it art? - Rudyard Kipling

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Saturday, November 21, 2026 11:01:58
    In message <fa96e13a5d.harriet@bazleyfamily.co.uk>
    Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:

    On 20 Nov 2026 as I do recall,
    Paul Stewart wrote:

    In message <3e5c55275d.harriet@bazleyfamily.co.uk>
    Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:


    I tried NightSky, which sounded interesting - I'm assuming the site uses >>> some filename protocol which is not supported by NetSurf, because the
    download link simply gave me a data file called 'download/php".

    Renaming that and setting the filetype to Zip allowed me to 'install'
    the application, which produced a copy in the specified destination
    directory, but I wasn't able to get it actually to run even after
    changing into a 256-colour desktop mode; I just get "Not enough memory
    to create sprite" errors, presumably because there is *too much* free
    memory rather than not enough.

    I tried running NightSky under Aemulor in order to limit the available
    memory visible to it, but that just gave me "Abort on data transfer"
    errors. :-(

    Downloaded it and unpacked with SparkFS
    Works fine here.
    Just had to switch to a 256 colour mode

    That may be a RISC OS 4 versus RISC OS 5 thing, then.
    If I run the application in a non-256-colour mode, I get

    21:10:29.10 ** WimpError ** from NightSky
    Error : &00000063
    Message: Mask or Palette operations not supported in this display depth

    If I switch to a 256-colour mode, I get

    21:10:43.74 ** WimpError ** from NightSky
    Error : &00000063
    Message: Not enough memory to create sprite

    If I run !NightSky via Aemulor, I get

    21:11:14.90 ** WimpError ** from Message from NightSky
    Error : &80000002
    Message: Internal error: abort on data transfer at &0212E280 : Code -2

    A9 Home has a different processor than the Pi or ARMx6. Some instructions
    are no longer accepted and crash the machine.
    According to APDL it is a neutral 32 bit version

    Just tested, works
    You need to modify the setting file: ChoicesD

    Line #5 Map action 0=mono,1=coloured,2=hires mono,3=hires coloured
    1 => 3

    Line #6 mode hi-res sprite is kept in
    20 => 24

    This allows you to see the programs working.
    There needs to be a better mode for sprites line #6 (colour an
    resolution).








    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Harriet Bazley@3:633/10 to All on Saturday, November 21, 2026 10:13:07
    On 20 Nov 2026 as I do recall,
    Harriet Bazley wrote:

    [snip]

    If I switch to a 256-colour mode, I get

    I then forgot to switch back out of the 256-colour mode, and had a panic
    later on as a result when I thought the sensors in my digital camera
    were starting to break down. :-D

    The normal desktop, of course, looks fine in 256 colours....

    --
    Harriet Bazley == Loyaulte me lie ==

    The best laid schemes o' mice and men gang oft a-gley.

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Harriet Bazley@3:633/10 to All on Saturday, November 21, 2026 17:01:26
    On 21 Nov 2026 as I do recall,
    Jean-Michel wrote:

    You need to modify the setting file: ChoicesD

    Line #5 Map action 0=mono,1=coloured,2=hires mono,3=hires coloured
    1 => 3

    Line #6 mode hi-res sprite is kept in
    20 => 24

    This allows you to see the programs working.

    That works! (It isn't very usable at that resolution, even if I zoom
    right in - the text is all virtually unreadable - but it does work.)

    --
    Harriet Bazley == Loyaulte me lie ==

    Anything can happen in the next half-hour....

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Saturday, November 21, 2026 19:19:08
    In message <060a4e3b5d.harriet@bazleyfamily.co.uk>
    Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:

    On 21 Nov 2026 as I do recall,
    Jean-Michel wrote:

    You need to modify the setting file: ChoicesD

    Line #5 Map action 0=mono,1=coloured,2=hires mono,3=hires coloured
    1 => 3

    Line #6 mode hi-res sprite is kept in
    20 => 24

    This allows you to see the programs working.

    That works! (It isn't very usable at that resolution, even if I zoom
    right in - the text is all virtually unreadable - but it does work.)

    Nice, mode 24 for sprites is not a good, needs a better mode, to build.

    It's already good to be able to check the functionalities, I think I had already used it
    I'm having trouble registering my location...


    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Saturday, November 21, 2026 19:38:26
    In message <3827553b5d.jmb@jmc.bruck.orange.fr>
    Jean-Michel <jmc.bruck@orange.fr> wrote:

    In message <060a4e3b5d.harriet@bazleyfamily.co.uk>
    Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:

    On 21 Nov 2026 as I do recall,
    Jean-Michel wrote:

    You need to modify the setting file: ChoicesD

    Line #5 Map action 0=mono,1=coloured,2=hires mono,3=hires coloured
    1 => 3

    Line #6 mode hi-res sprite is kept in
    20 => 24

    This allows you to see the programs working.

    That works! (It isn't very usable at that resolution, even if I zoom
    right in - the text is all virtually unreadable - but it does work.)

    Nice, mode 24 for sprites is not a good, needs a better mode, to build.
    a better available mode: 32 (800x600, 256C)
    mode 24 is 1026x25,256 but pixels are not square => bad display.




    --
    Jean-Michel

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)