• File sizing

    From Chris Newman@3:633/10 to All on Thursday, June 04, 2026 22:02:44
    Hi,

    Is there an app that will tell you the size of a file in KB or MB instead
    of bytes so I won't have to plough through the maths.

    RealCount by Sergio Monesi is from 1995 at is not 32 bit compatible.

    Regards,

    --
    Chris Newman

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Hughes@3:633/10 to All on Thursday, June 04, 2026 22:47:43
    In message <5ce3d805a9mec@npost.uk>
    Chris Newman <mec@npost.uk> wrote:

    Hi,

    Is there an app that will tell you the size of a file in KB or MB instead
    of bytes so I won't have to plough through the maths.

    Try turning on 'Full Info' in your filer dispaly that seems to show K


    --
    Chris Hughes

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Thursday, June 04, 2026 23:35:17
    In article <c423dce35c.chris@mytardis>,
    Chris Hughes <news13@noonehere.co.uk> wrote:
    In message <5ce3d805a9mec@npost.uk>
    Chris Newman <mec@npost.uk> wrote:

    Is there an app that will tell you the size of a file in KB or MB
    instead of bytes so I won't have to plough through the maths.

    Try turning on 'Full Info' in your filer dispaly that seems to show
    K

    Small files are shown as a number of Bytes, if over 64K they are shown
    as kilobytes, and if over 64M they are shown as Megabytes. The limits
    may not be correct, but the prinicple applies!

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Harriet Bazley@3:633/10 to All on Thursday, June 04, 2026 23:26:08
    On 4 Jun 2026 as I do recall,
    Chris Newman wrote:

    Is there an app that will tell you the size of a file in KB or MB instead
    of bytes so I won't have to plough through the maths.

    Director does it as part of its MenuMenu (displayed when you click Menu
    over the"File..." entry in the Filer menu), but that's slight overkill
    for your purposes...

    Looking at the relevant files (!Director.Menus.Files.FilerMenu), the
    bit of BASIC concerned is

    SYS "OS_ConvertFileSize",Size%,block%,1023 TO ,t%:?t%=13
    IF ?(t%-6)=32 OR Size%=1 THEN
    SYS Option%,"""Size: "+$block%+""""
    ELSE
    SYS Option%,"""Size: "+$block%+", "+STR$(Size%)+" bytes"""
    ENDIF

    where block% is an arbitrary block of memory and Size% is the size in
    bytes.

    --
    Harriet Bazley == Loyaulte me lie ==

    He that would govern others, first should be master of himself.

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Newman@3:633/10 to All on Friday, June 05, 2026 00:13:28
    In article <c423dce35c.chris@mytardis>, Chris Hughes
    <news13@noonehere.co.uk> wrote:
    In message <5ce3d805a9mec@npost.uk> Chris Newman <mec@npost.uk> wrote:

    Hi,

    Is there an app that will tell you the size of a file in KB or MB
    instead of bytes so I won't have to plough through the maths.

    Try turning on 'Full Info' in your filer dispaly that seems to show K

    So it does. Ta. But makes the view a bit unwieldy. Too much information.

    --
    Chris Newman

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Friday, June 05, 2026 23:36:11
    In article <5ce3e3fd77mec@npost.uk>,
    Chris Newman <mec@npost.uk> wrote:
    In article <c423dce35c.chris@mytardis>, Chris Hughes
    <news13@noonehere.co.uk> wrote:
    In message <5ce3d805a9mec@npost.uk> Chris Newman <mec@npost.uk> wrote:

    Is there an app that will tell you the size of a file in KB or
    MB instead of bytes so I won't have to plough through the maths.

    Try turning on 'Full Info' in your filer dispaly that seems to
    show K

    So it does. Ta. But makes the view a bit unwieldy. Too much
    information.

    You can esiliy switch the Filer between formats using Ctrl-F to cycle
    round them.

    There is always the command line eg
    to list all files in current directory use:
    *info *
    to list all files in Apps directory use:
    *info Apps.*
    to list one file use:
    *info filename

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Newman@3:633/10 to All on Saturday, June 06, 2026 14:37:54
    In article <4ca8dfe35c.harriet@bazleyfamily.co.uk>, Harriet Bazley <harriet@bazleyfamily.co.uk> wrote:
    On 4 Jun 2026 as I do recall, Chris Newman wrote:

    Is there an app that will tell you the size of a file in KB or MB
    instead of bytes so I won't have to plough through the maths.

    Director does it as part of its MenuMenu (displayed when you click Menu
    over the"File..." entry in the Filer menu), but that's slight overkill
    for your purposes...

    Ta. Never really explored Director but having a play now.

    --
    Chris Newman

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Newman@3:633/10 to All on Saturday, June 06, 2026 14:38:51
    In article <5ce46469ebNews04@avisoft.f9.co.uk>, Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5ce3e3fd77mec@npost.uk>, Chris Newman <mec@npost.uk> wrote:
    In article <c423dce35c.chris@mytardis>, Chris Hughes <news13@noonehere.co.uk> wrote:
    In message <5ce3d805a9mec@npost.uk> Chris Newman <mec@npost.uk>
    wrote:

    Is there an app that will tell you the size of a file in KB or MB instead of bytes so I won't have to plough through the maths.

    Try turning on 'Full Info' in your filer dispaly that seems to show
    K

    So it does. Ta. But makes the view a bit unwieldy. Too much
    information.

    You can esiliy switch the Filer between formats using Ctrl-F to cycle
    round them.

    So it does. I didn't know that. Most useful. Every day's a learning day.
    Ta.

    --
    Chris Newman

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Harriet Bazley@3:633/10 to All on Saturday, June 06, 2026 15:31:59
    On 6 Jun 2026 as I do recall,
    Chris Newman wrote:

    [snip]

    Ta. Never really explored Director but having a play now.

    I also find Director useful for doing a one-off change in Filer display
    format without affecting the default for any subsequent directories you
    open: clicking Menu over the close icon of a Filer window gives you a
    menu with the options "Full info by date" and "Small icons by name" down
    at the bottom (along with the various other options you get when
    clicking Menu over the close icon of any other window, e.g. iconise,
    pin, close all windows belonging to the parent app, etc.)

    I normally have my Filer display as Large icons by type, so it's
    occasionally handy to be able to switch the display for other purposes.

    --
    Harriet Bazley == Loyaulte me lie ==

    Joseph Stalin's grave was a Communist Plot.

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Richard Ashbery@3:633/10 to All on Monday, June 08, 2026 16:07:34

    You can esiliy switch the Filer between formats using Ctrl-F to
    cycle round them.

    So it does. I didn't know that. Most useful. Every day's a
    learning day. Ta.

    Apologies for ignorance but how does Ctrl-F work to cycle formats?
    I've tried it in filer window and it brings up a 'Find file' dialogue
    box.

    Richard


    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Newman@3:633/10 to All on Monday, June 08, 2026 16:29:20
    In article <5ce5c6d97abasura@invalid.addr.uk>,
    Richard Ashbery <basura@invalid.addr.uk> wrote:

    You can esiliy switch the Filer between formats using Ctrl-F to
    cycle round them.

    So it does. I didn't know that. Most useful. Every day's a
    learning day. Ta.

    Apologies for ignorance but how does Ctrl-F work to cycle formats?
    I've tried it in filer window and it brings up a 'Find file' dialogue
    box.

    Put your pointer in a directory (In a space, not over a file or folder)
    then hold CTRL and keep pressing "F". You'll find it cycles through the various options. When you open a folder the format you chosen remains
    until you press Ctrl-F again.


    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Monday, June 08, 2026 18:00:34
    In article <5ce5c6d97abasura@invalid.addr.uk>,
    Richard Ashbery <basura@invalid.addr.uk> wrote:

    You can esiliy switch the Filer between formats using Ctrl-F to
    cycle round them.

    So it does. I didn't know that. Most useful. Every day's a
    learning day. Ta.

    Apologies for ignorance but how does Ctrl-F work to cycle formats?
    I've tried it in filer window and it brings up a 'Find file'
    dialogue box.

    I suspect you are running QuickFiler? That allocates several function
    keys for filer-related actions, and by default Ctrl-F is indeed to
    open the Find File dialog box.

    QF allocates by default F1,F2,F3 & F4 to specific filer formats, so
    you may not need the normal Ctrl-F cycle formats. But if you do,
    simply comment out the MH17 line in !InstallQF.QMessages with a # hash
    sign and then re-install QF.

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jean-Michel@3:633/10 to All on Tuesday, June 09, 2026 09:09:43
    In message <5ce5d131d8News04@avisoft.f9.co.uk>
    Martin <News04@avisoft.f9.co.uk> wrote:

    In article <5ce5c6d97abasura@invalid.addr.uk>,
    Richard Ashbery <basura@invalid.addr.uk> wrote:

    You can esiliy switch the Filer between formats using Ctrl-F to
    cycle round them.

    So it does. I didn't know that. Most useful. Every day's a
    learning day. Ta.

    Apologies for ignorance but how does Ctrl-F work to cycle formats?
    I've tried it in filer window and it brings up a 'Find file'
    dialogue box.

    I suspect you are running QuickFiler? That allocates several function
    keys for filer-related actions, and by default Ctrl-F is indeed to
    open the Find File dialog box.

    QF allocates by default F1,F2,F3 & F4 to specific filer formats, so
    you may not need the normal Ctrl-F cycle formats. But if you do,
    simply comment out the MH17 line in !InstallQF.QMessages with a # hash
    sign and then re-install QF.

    I use QuickFiler and to find out the information on a file Ctrl-I works
    very well, (byte precision).

    --
    Jean-Michel

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Richard Ashbery@3:633/10 to All on Tuesday, June 09, 2026 14:24:56
    In article <5ce5d131d8News04@avisoft.f9.co.uk>, Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5ce5c6d97abasura@invalid.addr.uk>, Richard Ashbery
    <basura@invalid.addr.uk> wrote:

    You can esiliy switch the Filer between formats using Ctrl-F
    to cycle round them.

    So it does. I didn't know that. Most useful. Every day's a
    learning day. Ta.

    Apologies for ignorance but how does Ctrl-F work to cycle
    formats? I've tried it in filer window and it brings up a 'Find
    file' dialogue box.

    I suspect you are running QuickFiler? That allocates several
    function keys for filer-related actions, and by default Ctrl-F is
    indeed to open the Find File dialog box.

    Thanks Martin - that's exactly my setup. I should have realised that
    QuickFiler does this. Incidentally an excellent program.

    QF allocates by default F1,F2,F3 & F4 to specific filer formats, so
    you may not need the normal Ctrl-F cycle formats. But if you do,
    simply comment out the MH17 line in !InstallQF.QMessages with a #
    hash sign and then re-install QF.

    Thanks for that information.

    I've never used QuickFiler's Ctrl-I option pointed out by Jean-Michel
    to find file byte size - very useful.

    Richard


    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Newman@3:633/10 to All on Tuesday, June 09, 2026 15:24:40
    In article <5ce64149d5basura@invalid.addr.uk>,
    Richard Ashbery <basura@invalid.addr.uk> wrote:
    In article <5ce5d131d8News04@avisoft.f9.co.uk>, Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5ce5c6d97abasura@invalid.addr.uk>, Richard Ashbery
    <basura@invalid.addr.uk> wrote:

    You can esiliy switch the Filer between formats using Ctrl-F
    to cycle round them.

    So it does. I didn't know that. Most useful. Every day's a
    learning day. Ta.

    Apologies for ignorance but how does Ctrl-F work to cycle
    formats? I've tried it in filer window and it brings up a 'Find
    file' dialogue box.

    I suspect you are running QuickFiler? That allocates several
    function keys for filer-related actions, and by default Ctrl-F is
    indeed to open the Find File dialog box.

    Thanks Martin - that's exactly my setup. I should have realised that QuickFiler does this. Incidentally an excellent program.

    QF allocates by default F1,F2,F3 & F4 to specific filer formats, so
    you may not need the normal Ctrl-F cycle formats. But if you do,
    simply comment out the MH17 line in !InstallQF.QMessages with a #
    hash sign and then re-install QF.

    I discovered I had a copy of the QuickFiler utility but the installer
    gave this lot..

    15:20:27.91 ** WimpError ** from QuickFiler v2.24 Installer
    Error : &00000000
    Message: Sorry, install failed due to Token MT11 mismatch 'Rename' vs
    'Rename ^R'. QuickFiler removed from !Boot.
    15:20:27.91 Exec
    15:20:36.75 ** Error **
    Error : &000000F8
    Message: Filing system or path ram: not present
    15:20:36.75 Exec
    15:22:40.83 %Filer_OpenDir ADFS::FAST.$
    15:22:49.75 *Filer_Action
    15:22:49.75 *WimpSlot -min 40k -max 40k
    15:22:49.75 Exec
    15:22:50.01 Exec


    FAST Pi Compute Module 4 RISC OS 5.31


    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Tuesday, June 09, 2026 15:58:35
    In article <5ce646c1ecnewslists@npost.uk>,
    Chris Newman <newslists@npost.uk> wrote:

    [Snip]

    I discovered I had a copy of the QuickFiler utility but the
    installer gave this lot..

    15:20:27.91 ** WimpError ** from QuickFiler v2.24 Installer
    Error : &00000000
    Message: Sorry, install failed due to Token MT11 mismatch
    'Rename' vs 'Rename ^R'. QuickFiler removed from !Boot.

    You discovered an *old* version of QF - about 11 years old.
    The latest v2.28 should work just fine.

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Tuesday, June 09, 2026 16:03:26
    In article <5ce64149d5basura@invalid.addr.uk>,
    Richard Ashbery <basura@invalid.addr.uk> wrote:
    I've never used QuickFiler's Ctrl-I option pointed out by
    Jean-Michel to find file byte size - very useful.

    When you install QF it creates a !Help file, showing all the shortcut
    keys for YOUR installation. This is displayed and also stored in Choices:Boot.Tasks.!QFiler for reference.

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Newman@3:633/10 to All on Tuesday, June 09, 2026 17:59:22
    In article <5ce649dce1News04@avisoft.f9.co.uk>,
    Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5ce646c1ecnewslists@npost.uk>,
    Chris Newman <newslists@npost.uk> wrote:

    [Snip]

    I discovered I had a copy of the QuickFiler utility but the
    installer gave this lot..

    15:20:27.91 ** WimpError ** from QuickFiler v2.24 Installer
    Error : &00000000
    Message: Sorry, install failed due to Token MT11 mismatch
    'Rename' vs 'Rename ^R'. QuickFiler removed from !Boot.

    You discovered an *old* version of QF - about 11 years old.
    The latest v2.28 should work just fine.

    Anyone got a link please?


    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Martin@3:633/10 to All on Tuesday, June 09, 2026 18:33:12
    In article <5ce654eb85newslists@npost.uk>,
    Chris Newman <newslists@npost.uk> wrote:
    In article <5ce649dce1News04@avisoft.f9.co.uk>,
    Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5ce646c1ecnewslists@npost.uk>,
    Chris Newman <newslists@npost.uk> wrote:

    [Snip]

    I discovered I had a copy of the QuickFiler utility but the
    installer gave this lot..

    15:20:27.91 ** WimpError ** from QuickFiler v2.24 Installer
    Error : &00000000
    Message: Sorry, install failed due to Token MT11 mismatch
    'Rename' vs 'Rename ^R'. QuickFiler removed from !Boot.

    You discovered an *old* version of QF - about 11 years old.
    The latest v2.28 should work just fine.

    Anyone got a link please?

    Look in !InstallQF and you will see http://www.avisoft.f9.co.uk

    --
    Martin Avison
    Note that unfortunately this email address will become invalid
    without notice if (when) any spam is received.

    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Chris Newman@3:633/10 to All on Tuesday, June 09, 2026 22:27:27
    In article <5ce658046fNews04@avisoft.f9.co.uk>,
    Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5ce654eb85newslists@npost.uk>,
    Chris Newman <newslists@npost.uk> wrote:
    In article <5ce649dce1News04@avisoft.f9.co.uk>,
    Martin <News04@avisoft.f9.co.uk> wrote:
    In article <5ce646c1ecnewslists@npost.uk>,
    Chris Newman <newslists@npost.uk> wrote:

    [Snip]

    I discovered I had a copy of the QuickFiler utility but the
    installer gave this lot..

    15:20:27.91 ** WimpError ** from QuickFiler v2.24 Installer
    Error : &00000000
    Message: Sorry, install failed due to Token MT11 mismatch
    'Rename' vs 'Rename ^R'. QuickFiler removed from !Boot.

    You discovered an *old* version of QF - about 11 years old.
    The latest v2.28 should work just fine.

    Anyone got a link please?

    Look in !InstallQF and you will see http://www.avisoft.f9.co.uk

    Got it. Didn't look that far down the helpfile.


    --- PyGate Linux v1.5.15
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)