Keithr0 wrote:
Got any figures on the prevalence of˙ murder, rape, and terrorism by
illegals in Europe? You haven't been able to come up with any
instances of terrorism by illegals at all.
I could I just can't be bothered trying to educate you
as the saying goes.. "always tell the truth, there's less to remember"
On 8/11/2026 9:30 pm, Xeno wrote:
It's called desperation. When all they have is bullshit, when they
have nothing but bullshit, they flood the place with ever more bullshit.
"Bullshit"...it's ALL yours, spineless. Every fucking bit of it. :-D
Here it is again: No "AI", No excuses, just pure "Xeno" bullshit...
Tommy:"It was in our local newspaper. Either the Daily Telegraph or the Sydney Morning Herald." 1.23pm 24/10/17
Noddy:˙ For a start, the "Daily Telegraph" and "Sydney Morning Herald"
are *not* "local papers" , and if it was in either you should be able to find the electronic version of the story fairly easily.
Tommy: "They are in NSW." 2.59 24/10/17
Just more of Tom Claseners lies and stupidity .You couldnt tell the diff between a local and the statewide dalies. Yet then you go and try and bullshit your way out. Too Late, Tomas!
Tommy: "There are 4 things I get my news from. The two daily papers, our local˙ paper and an app on my phone." 26/10/17
Anyone seen the goal posts? Bueller? Bueller?
But now tommy tries to say AI explains it all. Except the shit he
plopped out was nearly *10 years* ago. Whoops!˙ Just a bit before AI's
time, tommy? :-D Can you fabricate an excuse for that?
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge problems in
the UK and Europe
On 8/11/2026 10:11 pm, lindsay wrote:
On 8/11/2026 9:30 pm, Xeno wrote:
It's called desperation. When all they have is bullshit, when they
have nothing but bullshit, they flood the place with ever more bullshit.
"Bullshit"...it's ALL yours, spineless. Every fucking bit of it. :-D
Here it is again: No "AI", No excuses, just pure "Xeno" bullshit...
Tommy:"It was in our local newspaper. Either the Daily Telegraph or
the Sydney Morning Herald." 1.23pm 24/10/17
Noddy:˙ For a start, the "Daily Telegraph" and "Sydney Morning Herald"
are *not* "local papers" , and if it was in either you should be able
to find the electronic version of the story fairly easily.
Tommy: "They are in NSW." 2.59 24/10/17
Just more of Tom Claseners lies and stupidity .You couldnt tell the
diff between a local and the statewide dalies. Yet then you go and try
and bullshit your way out. Too Late, Tomas!
Tommy: "There are 4 things I get my news from. The two daily papers,
our local˙ paper and an app on my phone." 26/10/17
Anyone seen the goal posts? Bueller? Bueller?
But now tommy tries to say AI explains it all. Except the shit he
plopped out was nearly *10 years* ago. Whoops!˙ Just a bit before AI's
time, tommy? :-D Can you fabricate an excuse for that?
Keithr0 wrote:
On 7/11/2026 12:18 pm, Axel wrote:
Keithr0 wrote:
On 6/11/2026 11:24 pm, Axel wrote:
Keithr0 wrote:Why should they?
On 6/11/2026 5:14 pm, Rod Speed wrote:
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote
Rod Speed wrote
Daryl <dwalford@westpine.com.au> wrote
Noddy wrote
Axel wrote
Keithr0 wrote
The likelihood of that hasn't materialy changed because of >>>>>>>>>>>>>> the Trump/ Netanyahu attacks. According to Netanyaku, Iran >>>>>>>>>>>>>> has been weeks away from having a bomb for years now. Even >>>>>>>>>>>>>> having the required amount of U235 doesn't mean that you >>>>>>>>>>>>>> are close to a viable bomb let alone the means of >>>>>>>>>>>>>> delivering it. Of course, nobody cares that Israel has a >>>>>>>>>>>>>> collection of nukes.
Israel is not going to use them. the war was started, >>>>>>>>>>>>> according to Trump, to prevent Iran from having them >>>>>>>>>>>>> because of the likelihood that they would use them
According to Trump. The man who has threatened to turn Iran >>>>>>>>>>>> into a wasteland.....
It is something that does not and cannot make the >>>>>>>>>>>>>>>> slightest difference to you, so why do you think it so >>>>>>>>>>>>>>>> important?
look at what's happening in England and Europe
I repeat, how does that affect you?
I want them to remain as western democracies terrorist >>>>>>>>>>>>> free, don't you? or do you only care about what happens in >>>>>>>>>>>>> your backyard and affects you personally
You don't live in England or Europe, and have no say about >>>>>>>>>>>> what happens there. So why you should give a fuck about any >>>>>>>>>>>> of this is a mystery, *other* than it being an opportunity >>>>>>>>>>>> for you to have a bit of a racist bent.
He seems to be happy to ignore the fact that at the moment >>>>>>>>>>> the worlds biggest worst terrorists are Israel and the US.
and you "seem to be happy to ignore the fact" that the stated >>>>>>>>> aim of radical Islam is to wipe Israel off the map
That's very arguable given Iran supplying what all the real >>>>>>>>>> terrorists like Hamas, Hezbullah and the Houthis are using >>>>>>>>>> and what Putin is up to in the Ukraine
˙indeed.
According to a Google search approx 74,000 Palestinians >>>>>>>>>>> including 21,000 children have died in the most recent
conflict, at the same time approx 1200 Israelis have died. >>>>>>>>>>> https://en.wikipedia.org/wiki/Casualties_of_the_Gaza_war
Because of what Hamas did on Oct 7
And that is nothing even remotely like genocide
Netanyahu seems to determined to wipe out Palestine
˙and Islamists are determined to wipe out Israel
Hardly surprising given what Hamas did on Oct 7
and what Hezbullah has been doing for decades
Israel needs it's Iron Dome defense system just to survive
Ever stopped to consider why organisations like Hamas an
Hezbollah exist?
They hated the idea of Israel ever since it was created and hated >>>>>>> jews
that showed up even before the state was stupidly created by the UN >>>>>>>
Could it be to do with the way that Israel has behaved, firstly >>>>>>>> by kicking the original inhabitants out of their homes when
Israel was formed,
That never happened
In spades with Lebanon
then invading neighboring countries
Only after they had tried to drive the jews into
the sea, 6 times, and failed every single time
and stealing their land.
That only happened with the Golan Heights
and it wasnt stealing, it was the result of the
failed attempt to invades Israel
The West Bank was part of Jordan, Gaza was part of Egypt.
?I support compulsory transfer. I don't see anything immoral in it? >>>>>>>> David Ben Gurion ? June 12 1938
But that didn't actually happen
Then why did several hundred thousand Palestinians end up in
stinking third world conditions in refugee camps? Did they just
decide to move out so that the nice friendly Jews could move in?
why won't Egypt and other Arab countries accept Palestinian refugees >>>>>
it shows how little regard they have for their Islamic Arab brotherhood
The Palestinians have a right to be where they are, why should the
Arab countries aid and abet the Israeli ethnic cleansing?
Palestinian refugees were trying to flee to Egypt, but Egypt wouldn't
let them in. you have been expressing so much concern for the
Palestinians, but now you're saying Arab countries shouldn't help them.
I think you just want to argue.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see a
need to mark things *you* find interesting. Here's a really cool
idea, you buy the newspapers and you mark the bits that interest
you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an
assertion needs to prove it. Anyway every newspaper in the country
has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for the
same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to paper newspaper articles and never have. Why would I need to? It is just
"news" after all, topical on the day, old news the next. Important news becomes history, trivia is forgotten.
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see a
need to mark things *you* find interesting. Here's a really cool
idea, you buy the newspapers and you mark the bits that interest
you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an
assertion needs to prove it. Anyway every newspaper in the country
has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for the
same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge problems in
the UK and Europe
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes to another
and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
Keithr0 wrote:
On 7/11/2026 12:40 pm, Axel wrote:
Rod Speed wrote:
Daryl <dwalford@westpine.com.au> wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Rod Speed wrote
How do you feel about what has happened to Trump ?
not a good thing. who knows what will happen now, and >>>>>>>>>>>>>>> will they start letting more illegals in?
Trump has caused chaos all over the world, with his random >>>>>>>>>>>>>> tariffs, and the stupid war that he started, and cannot >>>>>>>>>>>>>> finish.
so you would be happy for Iran to have nukes then?
The likelihood of that hasn't materialy changed because of >>>>>>>>>>>> the Trump/ Netanyahu attacks. According to Netanyaku, Iran >>>>>>>>>>>> has been weeks away from having a bomb for years now. Even >>>>>>>>>>>> having the required amount of U235 doesn't mean that you are >>>>>>>>>>>> close to a viable bomb let alone the means of delivering it. >>>>>>>>>>>> Of course, nobody cares that Israel has a collection of nukes. >>>>Israel is not going to use them.
Wanna bet? If they saw some advantage in using them they would.
the war was started, according to Trump, to prevent Iran from >>>>>>>>>>> having them because of the likelihood that they would use them
He has sucked up to Putin and Xi He has used the
presidency to enrich himself and his family to the tune of >>>>>>>>>>>>>> 6 million dollars a day, he has stripped the US government >>>>>>>>>>>>>> services of a vast number of perfectly competent people, >>>>>>>>>>>>>> and replaced them with yes men, yet your main concern >>>>>>>>>>>>>> seems to be illegal migration into the US.
It is something that does not and cannot make the >>>>>>>>>>>>>> slightest difference to you, so why do you think it so >>>>>>>>>>>>>> important?
look at what's happening in England and Europe
I repeat, how does that affect you?
I want them to remain as western democracies terrorist free, >>>>>>>>>>> don't you? or do you only care about what happens in your >>>>>>>>>>> backyard and affects you personally
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
Many more are natives of those countries.
and many aren't, especially those coming from Africa in small
boats, and concealed in the back of trucks from France
And what terrorist attacks have they made?
Do you have some data to back that up.
many terrorist attacks have been by illegals.
Want to name some incidents?
why should I do your bidding?
Because you made the assertion that many terrorist attacks have
been by illegals, and you don't seem to be able to quote even one >>>>>> let alone many.
you should know these things. do your own research if you don't.
In other words, you don't know but you want to believe it.
no I do know and you should too. why are you defending terrorism?
I'm not defending terrorists, I just want you to quote some
examples of where illegal immigrants have perpetrated terror attacks. >>>>
It has been shown that, in the US, illegal immigrants tend to be
more law abiding than the locals. It makes sense, they have more
to lose if they get caught.
Exactly, they avoid doing anything wrong sothey don't come to
attention of the authorities
Bullshit with their original flouting of migration
laws and street gang activity in spades
which makes a lot of sense and itsnot just the US where that happens. >>>>Must explain the machete wars and home invasion
that african kids in Melburg get up to
He mentions people "concealed in the back of trucks from France",
if he had ever been to France especially near a port like Calais he >>>>> would have seen the huge amount of effort the French and UK
authorities put into stopping people illegal immigration, people do >>>>> get in that way but the numbers are very very small.
Pity about the insane numbers that show up in rubber boats
authorities don't know how many ppl enter their countries illegally,
only how many get caught. simple fact is Europe has a huge problem
with illegals (murder, rape, terrorism, Islamification, etc.,)
Got any figures on the prevalence of˙ murder, rape, and terrorism by
illegals in Europe? You haven't been able to come up with any
instances of terrorism by illegals at all.
I could I just can't be bothered trying to educate you
and are finally fed up with their failed humanitarian exercise and
are now desperately trying to reverse the situation. if you import
the third world you become the third world.
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. It
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see a >>>>>> need to mark things *you* find interesting. Here's a really cool
idea, you buy the newspapers and you mark the bits that interest
you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an
assertion needs to prove it. Anyway every newspaper in the country
has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for the
same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is
just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
makes yo a hypocrite when you demand the same from anybody else.
Well, I have seen it in the daily news Darren.
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes to
another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
doesn't seem to make any difference to you. All that you have ever contributed to this happy little band of brothers is noise.
On 8/11/2026 8:54 pm, Axel wrote:
Keithr0 wrote:
Got any figures on the prevalence of˙ murder, rape, and terrorism by
illegals in Europe? You haven't been able to come up with any
instances of terrorism by illegals at all.
I could I just can't be bothered trying to educate you
Yeah, right. In other words, you can't find any facts to support your
racist bullshit.
On 9/11/2026 12:38 am, Noddy wrote:
On 8/11/2026 10:11 pm, lindsay wrote:
On 8/11/2026 9:30 pm, Xeno wrote:
It's called desperation. When all they have is bullshit, when they
have nothing but bullshit, they flood the place with ever more
bullshit.
"Bullshit"...it's ALL yours, spineless. Every fucking bit of it. :-D
Here it is again: No "AI", No excuses, just pure "Xeno" bullshit...
Tommy:"It was in our local newspaper. Either the Daily Telegraph or
the Sydney Morning Herald." 1.23pm 24/10/17
Noddy:˙ For a start, the "Daily Telegraph" and "Sydney Morning
Herald" are *not* "local papers" , and if it was in either you should
be able to find the electronic version of the story fairly easily.
Tommy: "They are in NSW." 2.59 24/10/17
Just more of Tom Claseners lies and stupidity .You couldnt tell the
diff between a local and the statewide dalies. Yet then you go and
try and bullshit your way out. Too Late, Tomas!
Tommy: "There are 4 things I get my news from. The two daily papers,
our local˙ paper and an app on my phone." 26/10/17
Anyone seen the goal posts? Bueller? Bueller?
But now tommy tries to say AI explains it all. Except the shit he
plopped out was nearly *10 years* ago. Whoops!˙ Just a bit before
AI's time, tommy? :-D Can you fabricate an excuse for that?
The 4 things I get my news from back 10 years ago still exist - I just
don't use all of them now.
I bought the Daily Telegraph and have done so since I moved up here.
That was the paper that was localised either with an inset at one time
or a supplement. I stopped buying that last year.
I bought the Sydney Morning Herald also since I moved up here, 14+ years now. It had miniscule local content, very Sydney centric but did cover
all the state in broad general terms.
Then there was the Coffs Coast Advocate, a biweekly newspaper that was
very local. Every major town in the area had its own equivalent
localised to that particular town.
Then there was the iPhone "News" app. It appeared some 10 or 11 years
ago and I used to use it until all the feeds into it became subscriber
only.
Nowadays I am subscribed the the SMH digital edition and a few
international ones. Local news primarily these days comes from the News
of the Area paper edition, a new once weekly local paper.
So Darren, no excuses needed.
Daryl <dwalford@westpine.com.au> wrote
Noddy wrote
Axel wrote
Keithr0 wrote
The likelihood of that hasn't materialy changed because of the
Trump/ Netanyahu attacks. According to Netanyaku, Iran has been
weeks away from having a bomb for years now. Even having the
required amount of U235 doesn't mean that you are close to a viable >>>>> bomb let alone the means of delivering it. Of course, nobody cares
that Israel has a collection of nukes.
Israel is not going to use them. the war was started, according to
Trump, to prevent Iran from having them because of the likelihood
that they would use them
According to Trump. The man who has threatened to turn Iran into a
wasteland.....
It is something that does not and cannot make the slightest
difference to you, so why do you think it so important?
look at what's happening in England and Europe
I repeat, how does that affect you?
I want them to remain as western democracies terrorist free, don't
you? or do you only care about what happens in your backyard and
affects you personally
˙You don't live in England or Europe, and have no say about what
happens there. So why you should give a fuck about any of this is a
mystery, *other* than it being an opportunity for you to have a bit
of a racist bent.
He seems to be happy to ignore the fact that at the moment the worlds
biggest worst terrorists are Israel and the US.
That's very arguable given Iran supplying what all the real
terrorists like Hamas, Hezbullah and the Houthis are using
and what Putin is up to in the Ukraine
According to a Google search approx 74,000 Palestinians including
21,000 children have died in the most recent conflict, at the same
time approx 1200 Israelis have died.
https://en.wikipedia.org/wiki/Casualties_of_the_Gaza_war
Because of what Hamas did on Oct 7
And that is nothing even remotely like genocide
Netanyahu seems to determined to wipe out Palestine
Hardly surprising given what Hamas did on Oct 7
and what Hezbullah has been doing for decades
and take their land
Not true of Hezbullah
and has conveniently used the October 7 attack as an excuse to carry
out genocide.
There is nothing even remotely like genocide
Trump started his war with Iran with the sole objective being to gain
control of their oil,
BULLSHIT
claiming that it was about nukes is just a smoke˙˙ screen.
BULLSHIT
Both leaders are by far the worst terrorists on the planet
Pity about Putin
yet fuck wits like Felix are worried about illegal immigrants in
countries a very long way from where he lives, illegals are a minor
problem compared to a lot of other bad shit caused by his heroes.
Noddy wrote:
On 8/11/2026 8:54 pm, Axel wrote:So you have some common ground then Fraudster. The inability to produce facts
Keithr0 wrote:
Got any figures on the prevalence of˙ murder, rape, and terrorism by
illegals in Europe? You haven't been able to come up with any
instances of terrorism by illegals at all.
I could I just can't be bothered trying to educate you
Yeah, right. In other words, you can't find any facts to support your
racist bullshit.
˙to support bullshit...
hth
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote
Keithr0 wrote
Axel wrote
Rod Speed wrote:
Daryl <dwalford@westpine.com.au> wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Rod Speed wrote
How do you feel about what has happened to Trump ?
not a good thing. who knows what will happen now, and >>>>>>>>>>>>>>>>> will they start letting more illegals in?
Trump has caused chaos all over the world, with his >>>>>>>>>>>>>>>> random tariffs, and the stupid war that he started, and >>>>>>>>>>>>>>>> cannot finish.
so you would be happy for Iran to have nukes then?
The likelihood of that hasn't materialy changed because of >>>>>>>>>>>>>> the Trump/ Netanyahu attacks. According to Netanyaku, Iran >>>>>>>>>>>>>> has been weeks away from having a bomb for years now. Even >>>>>>>>>>>>>> having the required amount of U235 doesn't mean that you >>>>>>>>>>>>>> are close to a viable bomb let alone the means of >>>>>>>>>>>>>> delivering it. Of course, nobody cares that Israel has a >>>>>>>>>>>>>> collection of˙˙ nukes.
Israel is not going to use them.
Wanna bet? If they saw some advantage in using them they would.
the war was started, according to Trump, to prevent Iran >>>>>>>>>>>>> from having them because of the likelihood that they would >>>>>>>>>>>>> use them
He has sucked up to Putin and Xi He has used the >>>>>>>>>>>>>>>> presidency to enrich himself and his family to the tune >>>>>>>>>>>>>>>> of 6 million dollars a day, he has stripped the US >>>>>>>>>>>>>>>> government services of a vast number of perfectly >>>>>>>>>>>>>>>> competent people, and replaced them with yes men, yet >>>>>>>>>>>>>>>> your main concern seems to be illegal migration into the >>>>>>>>>>>>>>>> US.
It is something that does not and cannot make the >>>>>>>>>>>>>>>> slightest difference to you, so why do you think it so >>>>>>>>>>>>>>>> important?
look at what's happening in England and Europe
I repeat, how does that affect you?
How does what happens in Israel affect you ?
I want them to remain as western democracies terrorist >>>>>>>>>>>>> free, don't you? or do you only care about what happens in >>>>>>>>>>>>> your backyard and affects you personally
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
Many more are natives of those countries.
and many aren't, especially those coming from Africa in small >>>>>>>>> boats, and concealed in the back of trucks from France
And what terrorist attacks have they made?
Do you have some data to back that up.
many terrorist attacks have been by illegals.
Want to name some incidents?
why should I do your bidding?
Because you made the assertion that many terrorist attacks have >>>>>>>> been by illegals, and you don't seem to be able to quote even >>>>>>>> one let alone many.
you should know these things. do your own research if you don't.
In other words, you don't know but you want to believe it.
no I do know and you should too. why are you defending terrorism?
I'm not defending terrorists, I just want you to quote some
examples of where illegal immigrants have perpetrated terror
attacks.
It has been shown that, in the US, illegal immigrants tend to be >>>>>>>> more law abiding than the locals. It makes sense, they have more >>>>>>>> to lose if they get caught.
Exactly, they avoid doing anything wrong sothey don't come to >>>>>>> attention of the authorities
Bullshit with their original flouting of migration
laws and street gang activity in spades
which makes a lot of sense and itsnot just the US where that
happens.
Must explain the machete wars and home invasion
that african kids in Melburg get up to
He mentions people "concealed in the back of trucks from France", >>>>>>> if he had ever been to France especially near a port like Calais >>>>>>> he would have seen the huge amount of effort the French and UK
authorities put into stopping people illegal immigration, people >>>>>>> do get in that way but the numbers are very very small.
Pity about the insane numbers that show up in rubber boats
authorities don't know how many ppl enter their countries
illegally, only how many get caught. simple fact is Europe has a
huge problem with illegals (murder, rape, terrorism,
Islamification, etc.,)
Got any figures on the prevalence of˙ murder, rape, and terrorism by
illegals in Europe? You haven't been able to come up with any
instances of terrorism by illegals at all.
I could I just can't be bothered trying to educate you
You educate me?
Trivial you are so fucking ignorant
You a funny guy felix, stupid but funny
Even more pathetic than you usually manage and that's saying somethingYou a funny guy speed, stupid but funny
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. It
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see >>>>>>> a need to mark things *you* find interesting. Here's a really
cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an >>>>>> assertion needs to prove it. Anyway every newspaper in the country >>>>>> has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is
just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
makes yo a hypocrite when you demand the same from anybody else.
I did not make an assertion, I made a declaration, a confirmation.
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I had
seen, just the vague whereabouts, vague because specific articles had
long slipped my mind.
If you really feel the need, feel free to do a Google search, it's not
hard!
Keithr0 <nothing.to.see@here.com.au> wrote
Xeno wrote
Keithr0 wrote
Xeno wrote
Keithr0 wrote
Xeno wrote
Keithr0 wrote
Xeno wrote
Keithr0 wrote
Xeno wrote
Noddy wrote
Axel wrote
Keithr0 wrote
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
Your mindless bullshit, as always
No copout at all Keith. I read the newspapers daily, I don't see >>>>>>> a need to mark things *you* find interesting. Here's a really
cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an >>>>>> assertion needs to prove it. Anyway every newspaper in the country >>>>>> has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is
just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
If you don't have the facts to back them up, don't make assertions.
Says the stupid hypocrit that claimed that I have only ever worked
for the govt and ended up face down in the mud, as alwaya
It˙˙ makes yo a hypocrite when you demand the same from anybody else.
You in spades, hypocrit
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes to
another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
Really? And why is that? Let's see some facts and not your worthless opinion.
but it
doesn't seem to make any difference to you. All that you have ever
contributed to this happy little band of brothers is noise.
When someone resorts to using Fraudsterisms then you know that they're a hapless numpty.
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote:
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote
Rod Speed wrote
Daryl <dwalford@westpine.com.au> wrote
Noddy wrote
Axel wrote
Keithr0 wrote
The likelihood of that hasn't materialy changed because >>>>>>>>>>>>>>>> of the Trump/ Netanyahu attacks. According to Netanyaku, >>>>>>>>>>>>>>>> Iran has been weeks away from having a bomb for years >>>>>>>>>>>>>>>> now. Even having the required amount of U235 doesn't >>>>>>>>>>>>>>>> mean that you are close to a viable bomb let alone the >>>>>>>>>>>>>>>> means of delivering it. Of course, nobody cares that >>>>>>>>>>>>>>>> Israel has a collection of nukes.
Israel is not going to use them. the war was started, >>>>>>>>>>>>>>> according to Trump, to prevent Iran from having them >>>>>>>>>>>>>>> because of the likelihood that they would use them
According to Trump. The man who has threatened to turn >>>>>>>>>>>>>> Iran into a wasteland.....
It is something that does not and cannot make the >>>>>>>>>>>>>>>>>> slightest difference to you, so why do you think it so >>>>>>>>>>>>>>>>>> important?
look at what's happening in England and Europe
I repeat, how does that affect you?
I want them to remain as western democracies terrorist >>>>>>>>>>>>>>> free, don't you? or do you only care about what happens >>>>>>>>>>>>>>> in your backyard and affects you personally
You don't live in England or Europe, and have no say about >>>>>>>>>>>>>> what happens there. So why you should give a fuck about >>>>>>>>>>>>>> any of this is a mystery, *other* than it being an >>>>>>>>>>>>>> opportunity for you to have a bit of a racist bent.
He seems to be happy to ignore the fact that at the moment >>>>>>>>>>>>> the worlds biggest worst terrorists are Israel and the US.
and you "seem to be happy to ignore the fact" that the stated >>>>>>>>>>> aim of radical Islam is to wipe Israel off the map
That's very arguable given Iran supplying what all the real >>>>>>>>>>>> terrorists like Hamas, Hezbullah and the Houthis are using >>>>>>>>>>>> and what Putin is up to in the Ukraine
indeed.
According to a Google search approx 74,000 Palestinians >>>>>>>>>>>>> including 21,000 children have died in the most recent >>>>>>>>>>>>> conflict, at the same time approx 1200 Israelis have died. >>>>>>>>>>>>> https://en.wikipedia.org/wiki/Casualties_of_the_Gaza_war
Because of what Hamas did on Oct 7
And that is nothing even remotely like genocide
Netanyahu seems to determined to wipe out Palestine
and Islamists are determined to wipe out Israel
Hardly surprising given what Hamas did on Oct 7
and what Hezbullah has been doing for decades
Israel needs it's Iron Dome defense system just to survive
Ever stopped to consider why organisations like Hamas an
Hezbollah exist?
They hated the idea of Israel ever since it was created and >>>>>>>>> hated jews
that showed up even before the state was stupidly created by >>>>>>>>> the UN
Could it be to do with the way that Israel has behaved,
firstly by kicking the original inhabitants out of their homes >>>>>>>>>> when Israel was formed,
That never happened
In spades with Lebanon
then invading neighboring countries
Only after they had tried to drive the jews into
the sea, 6 times, and failed every single time
and stealing their land.
That only happened with the Golan Heights
and it wasnt stealing, it was the result of the
failed attempt to invades Israel
The West Bank was part of Jordan, Gaza was part of Egypt.
?I support compulsory transfer. I don't see anything immoral >>>>>>>>>> in it?
David Ben Gurion ? June 12 1938
But that didn't actually happen
Then why did several hundred thousand Palestinians end up in
stinking third world conditions in refugee camps? Did they just >>>>>>>> decide to move out so that the nice friendly Jews could move in?
why won't Egypt and other Arab countries accept Palestinian refugees
Why should they?
it shows how little regard they have for their Islamic Arab
brotherhood
The Palestinians have a right to be where they are, why should the
Arab countries aid and abet the Israeli ethnic cleansing?
Palestinian refugees were trying to flee to Egypt, but Egypt wouldn't
let them in. you have been expressing so much concern for the
Palestinians, but now you're saying Arab countries shouldn't help
them. I think you just want to argue.
Nope, Israel has been conducting ethnic cleansing of the Palestinians
for years.
There is no ethnic cleansing given that there are still 2.2 Palestinians
in Israel proper who get to vote in Israeli elections
Even way back when Israel was being formed, there were a numberof
massacres of Palestinians at the hands of Jewish terrorists
Corse there was never any massacres of jews by Palestinians, eh ?
(yes a number of the founders of Israel were terrorist by any current
definition)
Corse there was never any Palestinian terrorists, eh ?
which was one of the reasons that thousands of Palestinians fled the
country.
Quite a few jews chose to leave too
More recently the Palestinians living in the West Bank and Gazahave
been put under harsher and harsher conditions
Hardly surprising given what they have got up to, most
recently with the killing of two of the IDF in Hebron
to try and˙˙ get them to go away.
Actually to try to get them to stop firing stuff at Israel and killing jews
On the West Bank, Palestinians have been coming under attack from
fanatical settlers who can only be described as terrorists, the IDF
does nothing to stop them
That last is a lie
even though they are breaking Israeli law.
Corse Oct 7 and what has just happened in Hebron doesn't do that, eh ?
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see >>>>>>>> a need to mark things *you* find interesting. Here's a really >>>>>>>> cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes >>>>>>> an assertion needs to prove it. Anyway every newspaper in the
country has a web edition, so no need for scrapbooks, just links. >>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody >>>>> who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is
just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
It makes yo a hypocrite when you demand the same from anybody else.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I had
seen, just the vague whereabouts, vague because specific articles had
long slipped my mind.
If you really feel the need, feel free to do a Google search, it's not
hard!
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see
a need to mark things *you* find interesting. Here's a really
cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an
assertion needs to prove it. Anyway every newspaper in the country
has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge problems
in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there?
Or are you just hoovering up whatever fits your rather ignorant
prejudices?
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see
a need to mark things *you* find interesting. Here's a really
cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an
assertion needs to prove it. Anyway every newspaper in the country
has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is
just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
It makes you a hypocrite when you demand the same from anybody else.
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
you are one of the ones that keep saying that anybody who makes >>>>>>> an assertion needs to prove it. Anyway every newspaper in the
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't
see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>> that interest you. You might end up with a nice little scrapbook.> >>>>>>>
country has a web edition, so no need for scrapbooks, just links. >>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is
just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
It makes yo a hypocrite when you demand the same from anybody else.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I had
seen, just the vague whereabouts, vague because specific articles had
long slipped my mind.
If you really feel the need, feel free to do a Google search, it's
not hard!
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
you are one of the ones that keep saying that anybody who makes >>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>> see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>>> that interest you. You might end up with a nice little scrapbook.> >>>>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is >>>>> just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
It makes yo a hypocrite when you demand the same from anybody else.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
it was just a comment. you're just making a fuss to attack Xeno.
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I had
seen, just the vague whereabouts, vague because specific articles had
long slipped my mind.
If you really feel the need, feel free to do a Google search, it's
not hard!
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see a >>>>>> need to mark things *you* find interesting. Here's a really cool
idea, you buy the newspapers and you mark the bits that interest
you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an
assertion needs to prove it. Anyway every newspaper in the country
has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for the
same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge problems
in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you in communication with people who actually live there? Or are you just
hoovering up whatever fits your rather ignorant prejudices?
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see >>>>>>> a need to mark things *you* find interesting. Here's a really
cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes
an assertion needs to prove it. Anyway every newspaper in the
country has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there? Or are you just
hoovering up whatever fits your rather ignorant prejudices?
Most likely he reads or listens to "news" that fits in with his racist
right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the security measures around the port were extreme, the people trying to get to the
UK were legally in France but wanted to go to the UK simply because
the UK has very generous welfare systems.
On 9/11/2026 11:03 am, Keithr0 wrote:
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there? Or are you just
hoovering up whatever fits your rather ignorant prejudices?
Most likely he reads or listens to "news" that fits in with his racist
right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he says,
the problems are logistics and infrastructure, not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the security measures around the port were extreme, the people trying to get to the
UK were legally in France but wanted to go to the UK simply because the
UK has very generous welfare systems.
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his racist
right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence and
terrorism.
12 yrs ago when we were in Calais heading back to the UK the security
measures around the port were extreme, the people trying to get to the
UK were legally in France but wanted to go to the UK simply because
the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook, line,
and sinker. and you never get the facts because you have the sensible rational people blocked.
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence and
terrorism.
12 yrs ago when we were in Calais heading back to the UK the security
measures around the port were extreme, the people trying to get to
the UK were legally in France but wanted to go to the UK simply
because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook, line,
and sinker. and you never get the facts because you have the sensible
rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he nailed
the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
On 6/11/2026 9:20 am, Daryl wrote:
On 5/11/2026 8:42 pm, Noddy wrote:
LOL, if I had to eat fast food and I had lots of choices I'd pick KFC,
KFC is the worst for me. Just driving past the store here in town,
the *smell* coming out of the place makes me want to puke....
their zinger burgers are reasonable.
I'd rather starve to death :)
On 9/11/2026 2:45 pm, alvey wrote:
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes to
another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
Really? And why is that? Let's see some facts and not your worthless
opinion.
but it
doesn't seem to make any difference to you. All that you have ever
contributed to this happy little band of brothers is noise.
When someone resorts to using Fraudsterisms then you know that they're
a hapless numpty.
Is that noise or filler, I suppose that it make little difference
anyway, just more of the same from you. Now, about some examples of the thousands of photo restorations that you claim to have made............
On 6/11/2026 2:09 pm, Noddy wrote:
On 6/11/2026 9:20 am, Daryl wrote:
On 5/11/2026 8:42 pm, Noddy wrote:
LOL, if I had to eat fast food and I had lots of choices I'd pick
KFC is the worst for me. Just driving past the store here in town,
the *smell* coming out of the place makes me want to puke....
KFC, their zinger burgers are reasonable.
I'd rather starve to death :)
Something we can agree on. Disgusting shit, all of it.
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence
and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying
to get to the UK were legally in France but wanted to go to the UK
simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote:
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote
Rod Speed wrote
Daryl <dwalford@westpine.com.au> wrote
Noddy wrote
Axel wrote
Keithr0 wrote
The likelihood of that hasn't materialy changed >>>>>>>>>>>>>>>>>> because of the Trump/ Netanyahu attacks. According to >>>>>>>>>>>>>>>>>> Netanyaku, Iran has been weeks away from having a bomb >>>>>>>>>>>>>>>>>> for years now. Even having the required amount of U235 >>>>>>>>>>>>>>>>>> doesn't mean that you are close to a viable bomb let >>>>>>>>>>>>>>>>>> alone the means of delivering it. Of course, nobody >>>>>>>>>>>>>>>>>> cares that Israel has a collection of nukes.
Israel is not going to use them. the war was started, >>>>>>>>>>>>>>>>> according to Trump, to prevent Iran from having them >>>>>>>>>>>>>>>>> because of the likelihood that they would use them
According to Trump. The man who has threatened to turn >>>>>>>>>>>>>>>> Iran into a wasteland.....
It is something that does not and cannot make the >>>>>>>>>>>>>>>>>>>> slightest difference to you, so why do you think it >>>>>>>>>>>>>>>>>>>> so important?
look at what's happening in England and Europe
I repeat, how does that affect you?
I want them to remain as western democracies terrorist >>>>>>>>>>>>>>>>> free, don't you? or do you only care about what happens >>>>>>>>>>>>>>>>> in your backyard and affects you personally
You don't live in England or Europe, and have no say >>>>>>>>>>>>>>>> about what happens there. So why you should give a fuck >>>>>>>>>>>>>>>> about any of this is a mystery, *other* than it being an >>>>>>>>>>>>>>>> opportunity for you to have a bit of a racist bent.
He seems to be happy to ignore the fact that at the >>>>>>>>>>>>>>> moment the worlds biggest worst terrorists are Israel and >>>>>>>>>>>>>>> the US.
and you "seem to be happy to ignore the fact" that the >>>>>>>>>>>>> stated aim of radical Islam is to wipe Israel off the map
That's very arguable given Iran supplying what all the real >>>>>>>>>>>>>> terrorists like Hamas, Hezbullah and the Houthis are using >>>>>>>>>>>>>> and what Putin is up to in the Ukraine
indeed.
According to a Google search approx 74,000 Palestinians >>>>>>>>>>>>>>> including 21,000 children have died in the most recent >>>>>>>>>>>>>>> conflict, at the same time approx 1200 Israelis have died. >>>>>>>>>>>>>>> https://en.wikipedia.org/wiki/Casualties_of_the_Gaza_war
Because of what Hamas did on Oct 7
And that is nothing even remotely like genocide
Netanyahu seems to determined to wipe out Palestine
and Islamists are determined to wipe out Israel
Hardly surprising given what Hamas did on Oct 7
and what Hezbullah has been doing for decades
Israel needs it's Iron Dome defense system just to survive
Ever stopped to consider why organisations like Hamas an >>>>>>>>>>>> Hezbollah exist?
They hated the idea of Israel ever since it was created and >>>>>>>>>>> hated jews
that showed up even before the state was stupidly created by >>>>>>>>>>> the UN
Could it be to do with the way that Israel has behaved, >>>>>>>>>>>> firstly by kicking the original inhabitants out of their >>>>>>>>>>>> homes when Israel was formed,
That never happened
In spades with Lebanon
then invading neighboring countries
Only after they had tried to drive the jews into
the sea, 6 times, and failed every single time
and stealing their land.
That only happened with the Golan Heights
and it wasnt stealing, it was the result of the
failed attempt to invades Israel
The West Bank was part of Jordan, Gaza was part of Egypt.
?I support compulsory transfer. I don't see anything immoral >>>>>>>>>>>> in it?
David Ben Gurion ? June 12 1938
But that didn't actually happen
Then why did several hundred thousand Palestinians end up in >>>>>>>>>> stinking third world conditions in refugee camps? Did they >>>>>>>>>> just decide to move out so that the nice friendly Jews could >>>>>>>>>> move in?
why won't Egypt and other Arab countries accept Palestinian >>>>>>>>> refugees
Why should they?
it shows how little regard they have for their Islamic Arab
brotherhood
The Palestinians have a right to be where they are, why should the >>>>>> Arab countries aid and abet the Israeli ethnic cleansing?
Palestinian refugees were trying to flee to Egypt, but Egypt
wouldn't let them in. you have been expressing so much concern for
the Palestinians, but now you're saying Arab countries shouldn't
help them. I think you just want to argue.
Nope, Israel has been conducting ethnic cleansing of the
Palestinians for years.
There is no ethnic cleansing given that there are still 2.2
Palestinians
in Israel proper who get to vote in Israeli elections
How many were there when Israel came into being?
No one was counting them then or even defining what
was a palestinian
Even way back when Israel was being formed, there were a numberof
massacres of Palestinians at the hands of Jewish terrorists
Corse there was never any massacres of jews by Palestinians, eh ?
I think not.
There you go, face down in the mud, as always
(yes a number of the founders of Israel were terrorist by any
current definition)
˙Corse there was never any Palestinian terrorists, eh ?
which was one of the reasons that thousands of Palestinians fled the
country.
˙Quite a few jews chose to leave too
More Jews are going to Israel, including a bunch from Australia shown
on TV the other night. Guess they are more Jewish than Australian.
Or they are only going there temporarily and
there have always been some doing that
More recently the Palestinians living in the West Bank and Gazahave
been put under harsher and harsher conditions
˙Hardly surprising given what they have got up to, most
recently with the killing of two of the IDF in Hebron
and how many locals have the IDF killed in recant times?
No one reliable is counting
to try and˙˙ get them to go away.
Actually to try to get them to stop firing stuff at Israel and
killing jews
The dead Jew to dead Palestinian ratio is somewhat weighted against
the Palestinians.
That's the way Israel does things and you get to like that or lump it
Same with the wars
On the West Bank, Palestinians have been coming under attack from
fanatical settlers who can only be described as terrorists, the IDF
does nothing to stop them
˙That last is a lie
Nope
Yep
even though they are breaking Israeli law.
Corse Oct 7 and what has just happened in Hebron doesn't do that, eh ?
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>> It makes yo a hypocrite when you demand the same from anybody else.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over >>>>>>>> yourself Keith!>
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>> really cool idea, you buy the newspapers and you mark the bits >>>>>>>>>> that interest you. You might end up with a nice little
scrapbook.>
you are one of the ones that keep saying that anybody who makes >>>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>> asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to >>>>>> paper newspaper articles and never have. Why would I need to? It
is just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't address
the elephant in the room - Darren's grandiose claims to trade qualifications, those and others, all proven bullshit>
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I had
seen, just the vague whereabouts, vague because specific articles
had long slipped my mind.
If you really feel the need, feel free to do a Google search, it's
not hard!
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see >>>>>>> a need to mark things *you* find interesting. Here's a really
cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an >>>>>> assertion needs to prove it. Anyway every newspaper in the country >>>>>> has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is
just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
he just stated that he'd seen news reports. talk about mountains out of molehills
It makes you a hypocrite when you demand the same from anybody else.
depends what they're saying.
Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see >>>>>>> a need to mark things *you* find interesting. Here's a really
cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes an >>>>>> assertion needs to prove it. Anyway every newspaper in the country >>>>>> has a web edition, so no need for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get over
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody
who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge problems
in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there?
no I'm just following what's been reported in the media and online. eg;
Italy: "Prime Minister Giorgia Meloni?s government has intensified
efforts to curb irregular migration and increase deportations, centering
its strategy on stricter border controls, controversial offshore
processing, and bilateral return agreements". https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing a
national crisis because of its failure to successfully integrate record numbers of immigrants". https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant
prejudices?
I suggest that applies to you. you're ignorant if you don't know what's
been happening, and prejudiced if you want to deny it
Daryl wrote:
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't see >>>>>>>> a need to mark things *you* find interesting. Here's a really >>>>>>>> cool idea, you buy the newspapers and you mark the bits that
interest you. You might end up with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who makes >>>>>>> an assertion needs to prove it. Anyway every newspaper in the
country has a web edition, so no need for scrapbooks, just links. >>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As somebody >>>>> who demands proof from others, you dodge and weave when asked for
the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there? Or are you just
hoovering up whatever fits your rather ignorant prejudices?
Most likely he reads or listens to "news" that fits in with his racist
right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence and
terrorism.
12 yrs ago when we were in Calais heading back to the UK the security
measures around the port were extreme, the people trying to get to the
UK were legally in France but wanted to go to the UK simply because
the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook, line,
and sinker. and you never get the facts because you have the sensible rational people blocked.
Xeno wrote:
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence
and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying
to get to the UK were legally in France but wanted to go to the UK
simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of them
could supply even one example of the alleged racism, I'm sure. and it's
true what I said about Daryl. he should get the facts for himself rather than swallow up everything his idiot mate tells him.
Keithr0 wrote:
On 9/11/2026 2:45 pm, alvey wrote:
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes to
another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
Really? And why is that? Let's see some facts and not your worthless
opinion.
but it
doesn't seem to make any difference to you. All that you have ever
contributed to this happy little band of brothers is noise.
When someone resorts to using Fraudsterisms then you know that
they're a hapless numpty.
Is that noise or filler, I suppose that it make little difference
anyway, just more of the same from you. Now, about some examples of
the thousands of photo restorations that you claim to have
made............
Asked to explain himself, apu Retcho slinks off.
Go away and stop bothering me.
On 6/11/2026 9:20 am, Daryl wrote:One of my grandsons had an after school job at KFC, God knows why - he's
On 5/11/2026 8:42 pm, Noddy wrote:
LOL, if I had to eat fast food and I had lots of choices I'd pick KFC,
KFC is the worst for me. Just driving past the store here in town,
the *smell* coming out of the place makes me want to puke....
their zinger burgers are reasonable.
I'd rather starve to death :)
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote
Xeno wrote
Noddy wrote
Axel wrote
Daryl wrote
Most likely he reads or listens to "news" that fits in with his >>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place and >>>>>>> especially in Australia but the problems are nothing like what he >>>>>>> says, the problems are logistics and infrastructure, not violence >>>>>>> and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying >>>>>>> to get to the UK were legally in France but wanted to go to the >>>>>>> UK simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about >>>>>> hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the >>>>>> sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
So your obvious Islamophobia is not racism then
Pity about your obvious antisemitism
(before any of your mates jump in, yes I know that Islam is a religion
not a race but Islamophobia tends to concentrate on particular races)
Same with antisemitism
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote:
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote
Rod Speed wrote
Daryl <dwalford@westpine.com.au> wrote
Noddy wrote
Axel wrote
Keithr0 wrote
The likelihood of that hasn't materialy changed >>>>>>>>>>>>>>>>>>>> because of the Trump/ Netanyahu attacks. According >>>>>>>>>>>>>>>>>>>> to Netanyaku, Iran has been weeks away from having a >>>>>>>>>>>>>>>>>>>> bomb for years now. Even having the required amount >>>>>>>>>>>>>>>>>>>> of U235 doesn't mean that you are close to a viable >>>>>>>>>>>>>>>>>>>> bomb let alone the means of delivering it. Of >>>>>>>>>>>>>>>>>>>> course, nobody cares that Israel has a collection of >>>>>>>>>>>>>>>>>>>> nukes.
Israel is not going to use them. the war was started, >>>>>>>>>>>>>>>>>>> according to Trump, to prevent Iran from having them >>>>>>>>>>>>>>>>>>> because of the likelihood that they would use them
According to Trump. The man who has threatened to turn >>>>>>>>>>>>>>>>>> Iran into a wasteland.....
It is something that does not and cannot make the >>>>>>>>>>>>>>>>>>>>>> slightest difference to you, so why do you think >>>>>>>>>>>>>>>>>>>>>> it so important?
look at what's happening in England and Europe
I repeat, how does that affect you?
I want them to remain as western democracies >>>>>>>>>>>>>>>>>>> terrorist free, don't you? or do you only care about >>>>>>>>>>>>>>>>>>> what happens in your backyard and affects you personally
You don't live in England or Europe, and have no say >>>>>>>>>>>>>>>>>> about what happens there. So why you should give a >>>>>>>>>>>>>>>>>> fuck about any of this is a mystery, *other* than it >>>>>>>>>>>>>>>>>> being an opportunity for you to have a bit of a racist >>>>>>>>>>>>>>>>>> bent.
He seems to be happy to ignore the fact that at the >>>>>>>>>>>>>>>>> moment the worlds biggest worst terrorists are Israel >>>>>>>>>>>>>>>>> and the US.
and you "seem to be happy to ignore the fact" that the >>>>>>>>>>>>>>> stated aim of radical Islam is to wipe Israel off the map
That's very arguable given Iran supplying what all the real >>>>>>>>>>>>>>>> terrorists like Hamas, Hezbullah and the Houthis are using >>>>>>>>>>>>>>>> and what Putin is up to in the Ukraine
indeed.
According to a Google search approx 74,000 Palestinians >>>>>>>>>>>>>>>>> including 21,000 children have died in the most recent >>>>>>>>>>>>>>>>> conflict, at the same time approx 1200 Israelis have died. >>>>>>>>>>>>>>>>> https://en.wikipedia.org/wiki/Casualties_of_the_Gaza_war
Because of what Hamas did on Oct 7
And that is nothing even remotely like genocide
Netanyahu seems to determined to wipe out Palestine
and Islamists are determined to wipe out Israel
Hardly surprising given what Hamas did on Oct 7 >>>>>>>>>>>>>>>> and what Hezbullah has been doing for decades
Israel needs it's Iron Dome defense system just to survive
Ever stopped to consider why organisations like Hamas an >>>>>>>>>>>>>> Hezbollah exist?
They hated the idea of Israel ever since it was created and >>>>>>>>>>>>> hated jews˙˙ that showed up even before the state was >>>>>>>>>>>>> stupidlycreated by˙˙ the UN
Could it be to do with the way that Israel has behaved, >>>>>>>>>>>>>> firstly by kicking the original inhabitants out of their >>>>>>>>>>>>>> homes when Israel was formed,
That never happened
In spades with Lebanon
then invading neighboring countries
Only after they had tried to drive the jews into
the sea, 6 times, and failed every single time
and stealing their land.
That only happened with the Golan Heights
and it wasnt stealing, it was the result of the
failed attempt to invades Israel
The West Bank was part of Jordan, Gaza was part of Egypt.
Wrong on both counts
?I support compulsory transfer. I don't see anything >>>>>>>>>>>>>> immoral in it?
David Ben Gurion ? June 12 1938
But that didn't actually happen
Then why did several hundred thousand Palestinians end up in >>>>>>>>>>>> stinking third world conditions in refugee camps? Did they >>>>>>>>>>>> just decide to move out so that the nice friendly Jews could >>>>>>>>>>>> move in?
why won't Egypt and other Arab countries accept Palestinian >>>>>>>>>>> refugees
Why should they?
it shows how little regard they have for their Islamic Arab >>>>>>>>> brotherhood
The Palestinians have a right to be where they are, why should >>>>>>>> the Arab countries aid and abet the Israeli ethnic cleansing?
Palestinian refugees were trying to flee to Egypt, but Egypt
wouldn't let them in. you have been expressing so much concern
for the Palestinians, but now you're saying Arab countries
shouldn't help them. I think you just want to argue.
Nope, Israel has been conducting ethnic cleansing of the
Palestinians for years.
There is no ethnic cleansing given that there are still 2.2
Palestinians˙˙ in Israel proper who get to vote in Israeli elections
How many were there when Israel came into being?
˙No one was counting them then or even defining what
was a palestinian
Even way back when Israel was being formed, there were a number of >>>>>> massacres of Palestinians at the hands of Jewish terrorists
Corse there was never any massacres of jews by Palestinians, eh ?
I think not.
˙There you go, face down in the mud, as always
(yes a number of the founders of Israel were terrorist by any
current definition)
˙Corse there was never any Palestinian terrorists, eh ?
which was one of the reasons that thousands of Palestinians fled
the country.
˙Quite a few jews chose to leave too
More Jews are going to Israel, including a bunch from Australia
shown on TV the other night. Guess they are more Jewish than
Australian.
Or they are only going there temporarily and
there have always been some doing that
That is not what they were saying on the TV news.
That's the reality regardless of what a tiny handful
selectively quoted on some interview might have said
More recently the Palestinians living in the West Bank and Gaza
have been put under harsher and harsher conditions
Hardly surprising given what they have got up to, most
recently with the killing of two of the IDF in Hebron
and how many locals have the IDF killed in recant times?
˙No one reliable is counting
to try and get them to go away.
Actually to try to get them to stop firing stuff at Israel and
killing jews
The dead Jew to dead Palestinian ratio is somewhat weighted against
the Palestinians.
˙That's the way Israel does things and you get to like that or lump it
˙Same with the wars
On the West Bank, Palestinians have been coming under attack from >>>>>> fanatical settlers who can only be described as terrorists, the
IDF does nothing to stop them
˙That last is a lie
Nope
˙Yep
even though they are breaking Israeli law.
Corse Oct 7 and what has just happened in Hebron doesn't do that, eh ?
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.>
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>>> asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to >>>>>>> paper newspaper articles and never have. Why would I need to? It >>>>>>> is just "news" after all, topical on the day, old news the next. >>>>>>> Important news becomes history, trivia is forgotten.
assertions. It makes yo a hypocrite when you demand the same from >>>>>> anybody else.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't address
the elephant in the room - Darren's grandiose claims to trade
qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust engines.
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I
had seen, just the vague whereabouts, vague because specific
articles had long slipped my mind.
If you really feel the need, feel free to do a Google search, it's
not hard!
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and >>>>>> especially in Australia but the problems are nothing like what he >>>>>> says, the problems are logistics and infrastructure, not violence >>>>>> and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying >>>>>> to get to the UK were legally in France but wanted to go to the UK >>>>>> simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of them
could supply even one example of the alleged racism, I'm sure. and
it's true what I said about Daryl. he should get the facts for himself
rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but Islamophobia tends to concentrate on particular races)
On 10/11/2026 2:19 pm, alvey wrote:
Keithr0 wrote:
On 9/11/2026 2:45 pm, alvey wrote:
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes to
another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
Really? And why is that? Let's see some facts and not your worthless
opinion.
but it
doesn't seem to make any difference to you. All that you have ever
contributed to this happy little band of brothers is noise.
When someone resorts to using Fraudsterisms then you know that
they're a hapless numpty.
Is that noise or filler, I suppose that it make little difference
anyway, just more of the same from you. Now, about some examples of
the thousands of photo restorations that you claim to have
made............
Asked to explain himself, apu Retcho slinks off.
Go away and stop bothering me.
Asked to explain himself, alvey just changes the subject.˙ Now, about
some examples of the thousands of photo restorations that you claim to
have made............
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
you are one of the ones that keep saying that anybody who makes >>>>>>> an assertion needs to prove it. Anyway every newspaper in the
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't
see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>> that interest you. You might end up with a nice little scrapbook.> >>>>>>>
country has a web edition, so no need for scrapbooks, just links. >>>>>>
yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is
just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
he just stated that he'd seen news reports. talk about mountains out
of molehills
Saying that you've seen something somewhere is nothing like backing up assertions with facts. One rules for xeno et al, another for the rest
of us.
It makes you a hypocrite when you demand the same from anybody else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is what
it is.
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than reading reports that may be coloured by the writers own views.
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
you are one of the ones that keep saying that anybody who makes >>>>>>> an assertion needs to prove it. Anyway every newspaper in the
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't
see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>> that interest you. You might end up with a nice little scrapbook.> >>>>>>>
country has a web edition, so no need for scrapbooks, just links. >>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there?
no I'm just following what's been reported in the media and online. eg;
Italy: "Prime Minister Giorgia Meloni?s government has intensified
efforts to curb irregular migration and increase deportations,
centering its strategy on stricter border controls, controversial
offshore processing, and bilateral return agreements".
https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing a
national crisis because of its failure to successfully integrate
record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant
prejudices?
I suggest that applies to you. you're ignorant if you don't know
what's been happening, and prejudiced if you want to deny it
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whereas you tend to be xeno's and alvey's echo chamber.
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>> see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>>> that interest you. You might end up with a nice little
scrapbook.>
you are one of the ones that keep saying that anybody who makes >>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are
you in communication with people who actually live there? Or are
you just hoovering up whatever fits your rather ignorant prejudices?
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence
and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying to
get to the UK were legally in France but wanted to go to the UK
simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
Keithr0 wrote:
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than reading
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
you are one of the ones that keep saying that anybody who makes >>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>> see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>>> that interest you. You might end up with a nice little scrapbook.> >>>>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there?
no I'm just following what's been reported in the media and online. eg;
Italy: "Prime Minister Giorgia Meloni?s government has intensified
efforts to curb irregular migration and increase deportations,
centering its strategy on stricter border controls, controversial
offshore processing, and bilateral return agreements".
https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing a
national crisis because of its failure to successfully integrate
record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant
prejudices?
I suggest that applies to you. you're ignorant if you don't know
what's been happening, and prejudiced if you want to deny it
reports that may be coloured by the writers own views.
what first hand knowledge? are you (stupidly) suggesting that because
you visited some country at a particular time, that you're in a better position to know what goes on there than the news media who are
reporting on political, economic, social, and cultural events there on a daily basis?
On 10/11/2026 11:39 am, Xeno wrote:
Nothing
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and >>>>>> especially in Australia but the problems are nothing like what he >>>>>> says, the problems are logistics and infrastructure, not violence >>>>>> and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying >>>>>> to get to the UK were legally in France but wanted to go to the
UK simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but Islamophobia tends to concentrate on particular races)
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:My dear fellow, I am merely stating facts. I didn't keep links
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.>
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave
when asked for the same. It's you that needs to get over yourself. >>>>>>>
to paper newspaper articles and never have. Why would I need to? >>>>>>> It is just "news" after all, topical on the day, old news the
next. Important news becomes history, trivia is forgotten.
assertions. It makes yo a hypocrite when you demand the same from >>>>>> anybody else.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to trade
qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust engines.
Keithr0 wrote:Turbo props, jet engines, all internal combustion, no nitpicking
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>> to paper newspaper articles and never have. Why would I need to? >>>>>>>> It is just "news" after all, topical on the day, old news the >>>>>>>> next. Important news becomes history, trivia is forgotten.
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over yourself. >>>>>>>>
assertions. It makes yo a hypocrite when you demand the same from >>>>>>> anybody else.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to trade
qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust engines.
they are
Keithr0 wrote:
On 10/11/2026 11:39 am, Xeno wrote:
Nothing
I am in awe of your amazing rhetoric and compelling arguments
On 10/11/2026 7:56 pm, Axel wrote:Yep, you're full of it! Bullshit too!
Keithr0 wrote:
On 10/11/2026 11:39 am, Xeno wrote:
Nothing
I am in awe of your amazing rhetoric and compelling arguments
Jesus Christ. The fucking *irony* :)
On 10/11/2026 7:56 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 11:39 am, Xeno wrote:
Nothing
I am in awe of your amazing rhetoric and compelling arguments
Jesus Christ. The fucking *irony* :)
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote˙Wrong on both counts
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote:
Keithr0 wrote
Axel wrote
Keithr0 wrote
Axel wrote
Keithr0 wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote
Rod Speed wrote
Daryl <dwalford@westpine.com.au> wrote
Noddy wrote
Axel wrote
Keithr0 wrote
The likelihood of that hasn't materialy changed >>>>>>>>>>>>>>>>>>>>>> because of the Trump/ Netanyahu attacks. According >>>>>>>>>>>>>>>>>>>>>> to Netanyaku, Iran has been weeks away from having >>>>>>>>>>>>>>>>>>>>>> a bomb for years now. Even having the required >>>>>>>>>>>>>>>>>>>>>> amount of U235 doesn't mean that you are close to >>>>>>>>>>>>>>>>>>>>>> a viable bomb let alone the means of delivering >>>>>>>>>>>>>>>>>>>>>> it. Of course, nobody cares that Israel has a >>>>>>>>>>>>>>>>>>>>>> collection of nukes.
Israel is not going to use them. the war was >>>>>>>>>>>>>>>>>>>>> started, according to Trump, to prevent Iran from >>>>>>>>>>>>>>>>>>>>> having them because of the likelihood that they >>>>>>>>>>>>>>>>>>>>> would use them
According to Trump. The man who has threatened to >>>>>>>>>>>>>>>>>>>> turn Iran into a wasteland.....
It is something that does not and cannot make >>>>>>>>>>>>>>>>>>>>>>>> the slightest difference to you, so why do you >>>>>>>>>>>>>>>>>>>>>>>> think it so important?
look at what's happening in England and Europe
I repeat, how does that affect you?
I want them to remain as western democracies >>>>>>>>>>>>>>>>>>>>> terrorist free, don't you? or do you only care >>>>>>>>>>>>>>>>>>>>> about what happens in your backyard and affects you >>>>>>>>>>>>>>>>>>>>> personally
You don't live in England or Europe, and have no say >>>>>>>>>>>>>>>>>>>> about what happens there. So why you should give a >>>>>>>>>>>>>>>>>>>> fuck about any of this is a mystery, *other* than it >>>>>>>>>>>>>>>>>>>> being an opportunity for you to have a bit of a >>>>>>>>>>>>>>>>>>>> racist bent.
He seems to be happy to ignore the fact that at the >>>>>>>>>>>>>>>>>>> moment the worlds biggest worst terrorists are Israel >>>>>>>>>>>>>>>>>>> and the US.
and you "seem to be happy to ignore the fact" that the >>>>>>>>>>>>>>>>> stated aim of radical Islam is to wipe Israel off the map
That's very arguable given Iran supplying what all the >>>>>>>>>>>>>>>>>> real
terrorists like Hamas, Hezbullah and the Houthis are >>>>>>>>>>>>>>>>>> using
and what Putin is up to in the Ukraine
indeed.
According to a Google search approx 74,000 >>>>>>>>>>>>>>>>>>> Palestinians including 21,000 children have died in >>>>>>>>>>>>>>>>>>> the most recent conflict, at the same time approx >>>>>>>>>>>>>>>>>>> 1200 Israelis have died.Because of what Hamas did on Oct 7
https://en.wikipedia.org/wiki/Casualties_of_the_Gaza_war >>>
And that is nothing even remotely like genocide
Netanyahu seems to determined to wipe out Palestine
and Islamists are determined to wipe out Israel
Hardly surprising given what Hamas did on Oct 7 >>>>>>>>>>>>>>>>>> and what Hezbullah has been doing for decades
Israel needs it's Iron Dome defense system just to survive >>>Ever stopped to consider why organisations like Hamas an >>>>>>>>>>>>>>>> Hezbollah exist?
They hated the idea of Israel ever since it was created >>>>>>>>>>>>>>> and hated jews˙˙ that showed up even before the state was >>>>>>>>>>>>>>> stupidlycreated by˙˙ the UN
Could it be to do with the way that Israel has behaved, >>>>>>>>>>>>>>>> firstly by kicking the original inhabitants out of their >>>>>>>>>>>>>>>> homes when Israel was formed,
That never happened
In spades with Lebanon
then invading neighboring countries
Only after they had tried to drive the jews into >>>>>>>>>>>>>>> the sea, 6 times, and failed every single time
and stealing their land.
That only happened with the Golan Heights
and it wasnt stealing, it was the result of the
failed attempt to invades Israel
The West Bank was part of Jordan, Gaza was part of Egypt.
?I support compulsory transfer. I don't see anything >>>>>>>>>>>>>>>> immoral in it?
David Ben Gurion ? June 12 1938
But that didn't actually happen
Then why did several hundred thousand Palestinians end up >>>>>>>>>>>>>> in stinking third world conditions in refugee camps? Did >>>>>>>>>>>>>> they just decide to move out so that the nice friendly >>>>>>>>>>>>>> Jews could move in?
why won't Egypt and other Arab countries accept Palestinian >>>>>>>>>>>>> refugees
Why should they?
it shows how little regard they have for their Islamic Arab >>>>>>>>>>> brotherhood
The Palestinians have a right to be where they are, why should >>>>>>>>>> the Arab countries aid and abet the Israeli ethnic cleansing?
Palestinian refugees were trying to flee to Egypt, but Egypt >>>>>>>>> wouldn't let them in. you have been expressing so much concern >>>>>>>>> for the Palestinians, but now you're saying Arab countries
shouldn't help them. I think you just want to argue.
Nope, Israel has been conducting ethnic cleansing of the
Palestinians for years.
There is no ethnic cleansing given that there are still 2.2How many were there when Israel came into being?
Palestinians˙˙ in Israel proper who get to vote in Israeli elections >>>
˙No one was counting them then or even defining what
was a palestinian
Even way back when Israel was being formed, there were a number >>>>>>>> of massacres of Palestinians at the hands of Jewish terrorists
Corse there was never any massacres of jews by Palestinians, eh ?
I think not.
˙There you go, face down in the mud, as always
(yes a number of the founders of Israel were terrorist by any >>>>>>>> current definition)
˙Corse there was never any Palestinian terrorists, eh ?
which was one of the reasons that thousands of Palestinians fled >>>>>>>> the country.
˙Quite a few jews chose to leave too
More Jews are going to Israel, including a bunch from Australia
shown on TV the other night. Guess they are more Jewish than
Australian.
Or they are only going there temporarily and
there have always been some doing that
That is not what they were saying on the TV news.
That's the reality regardless of what a tiny handful
selectively quoted on some interview might have said
Tell us
How many of you are there between those ears, whingeing fuckwit pom
how you know rod.
Everything that shows up on a news clip has to be, whingeing fuckwit pom
More recently the Palestinians living in the West Bank and Gaza >>>>>>>> have been put under harsher and harsher conditions
Hardly surprising given what they have got up to, most
recently with the killing of two of the IDF in Hebron
and how many locals have the IDF killed in recant times?
˙No one reliable is counting
to try and get them to go away.
Actually to try to get them to stop firing stuff at Israel and
killing jews
The dead Jew to dead Palestinian ratio is somewhat weighted
against the Palestinians.
˙That's the way Israel does things and you get to like that or lump it >>>
˙Same with the wars
On the West Bank, Palestinians have been coming under attack
from fanatical settlers who can only be described as terrorists, >>>>>>>> the IDF does nothing to stop them
˙That last is a lie
Nope
˙Yep
even though they are breaking Israeli law.
Corse Oct 7 and what has just happened in Hebron doesn't do that, >>>>>>> eh ?
On 10/11/2026 4:32 pm, Keithr0 wrote:
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>> to paper newspaper articles and never have. Why would I need to? >>>>>>>> It is just "news" after all, topical on the day, old news the >>>>>>>> next. Important news becomes history, trivia is forgotten.
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over yourself. >>>>>>>>
assertions. It makes yo a hypocrite when you demand the same from >>>>>>> anybody else.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to trade
qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust engines.
The alternative is *external combustion* and that they ain't!>
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I
had seen, just the vague whereabouts, vague because specific
articles had long slipped my mind.
If you really feel the need, feel free to do a Google search, it's >>>>>> not hard!
Keithr0 wrote:
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>> to paper newspaper articles and never have. Why would I need to? >>>>>>>> It is just "news" after all, topical on the day, old news the >>>>>>>> next. Important news becomes history, trivia is forgotten.
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over yourself. >>>>>>>>
assertions. It makes yo a hypocrite when you demand the same from >>>>>>> anybody else.
I did not make an assertion, I made a declaration, a confirmation.
I've never known anybody who could split hairs so finely.
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to trade
qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust engines.
they are
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
you are one of the ones that keep saying that anybody who makes >>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>> see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>>> that interest you. You might end up with a nice little scrapbook.> >>>>>>>>
yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to
paper newspaper articles and never have. Why would I need to? It is >>>>> just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
Ok then, lets see some proof that you worked at NASA
he just stated that he'd seen news reports. talk about mountains out
of molehills
Saying that you've seen something somewhere is nothing like backing up
assertions with facts. One rules for xeno et al, another for the rest
of us.
it's ridiculous to suggest that someone should back up a simple comment
with evidence
It makes you a hypocrite when you demand the same from anybody else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is what
it is.
it does depend on what's said. "I watched a football match on TV on Saturday" is not in the same ball park as "I'm a qualified accountant".
no one would be silly enough to suggest that someone proves they watched
TV, well, you maybe, but a person claiming to be an accountant could be expected to show he is qualified as such.
Keithr0 wrote:
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than reading
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
you are one of the ones that keep saying that anybody who makes >>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>> see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>>> that interest you. You might end up with a nice little scrapbook.> >>>>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there?
no I'm just following what's been reported in the media and online. eg;
Italy: "Prime Minister Giorgia Meloni?s government has intensified
efforts to curb irregular migration and increase deportations,
centering its strategy on stricter border controls, controversial
offshore processing, and bilateral return agreements".
https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing a
national crisis because of its failure to successfully integrate
record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant
prejudices?
I suggest that applies to you. you're ignorant if you don't know
what's been happening, and prejudiced if you want to deny it
reports that may be coloured by the writers own views.
what first hand knowledge? are you (stupidly) suggesting that because
you visited some country at a particular time, that you're in a better position to know what goes on there than the news media who are
reporting on political, economic, social, and cultural events there on a daily basis?
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote
Keithr0 <nothing.to.see@here.com.au> wrote
Axel wrote
Xeno wrote
Noddy wrote
Axel wrote
Daryl wrote
Most likely he reads or listens to "news" that fits in with his >>>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>>> what he says, the problems are logistics and infrastructure, >>>>>>>>> not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>> security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>>> to the UK simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk
about hoovering up. it's what you do. you buy everything he says >>>>>>>> hook, line, and sinker. and you never get the facts because you >>>>>>>> have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he >>>>>>> nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure. >>>>> and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
So your obvious Islamophobia is not racism then
˙Pity about your obvious antisemitism
ROTFL, I have known, worked with, and been friends withmore Israelis
than you've met in your whole miserable life.
You have no fucking idea about what I have done
A few of them were really good people, a few were arseholes, the
majority were just ordinary easy to get on with people.
Thinking that Israel's policies to the˙ Palestiniansis inhumane and
stupid is not antisemitism.
Wrong, as always
It should also be noted that the Palestinians are also Semites,
therefore your rantings are actually antisemitic.
You never could bullsht your way out of a wet paper bag, whingeing
fuckwit pom
(before any of your mates jump in, yes I know that Islam is a
religion not a race but Islamophobia tends to concentrate on
particular races)
˙Same with antisemitism
On 10/11/2026 4:44 pm, Keithr0 wrote:
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place and >>>>>>> especially in Australia but the problems are nothing like what he >>>>>>> says, the problems are logistics and infrastructure, not violence >>>>>>> and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying >>>>>>> to get to the UK were legally in France but wanted to go to the >>>>>>> UK simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about >>>>>> hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the >>>>>> sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Beg to differ, Islamophobia concentrates on religious practices. Islamophobia is rooted in the fear of the difference.
Keithr0 wrote:
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place and >>>>>>> especially in Australia but the problems are nothing like what he >>>>>>> says, the problems are logistics and infrastructure, not violence >>>>>>> and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying >>>>>>> to get to the UK were legally in France but wanted to go to the >>>>>>> UK simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about >>>>>> hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the >>>>>> sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
a phobia is an irrational fear. there's nothing irrational about being
fully cognizant of the dangers of an ideology
Keithr0 wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whereas you tend to be xeno's and alvey's echo chamber.
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over >>>>>>>> yourself Keith!>
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>> really cool idea, you buy the newspapers and you mark the bits >>>>>>>>>> that interest you. You might end up with a nice little
scrapbook.>
you are one of the ones that keep saying that anybody who makes >>>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>> asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are
you in communication with people who actually live there? Or are
you just hoovering up whatever fits your rather ignorant prejudices? >>>>>
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence
and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying to
get to the UK were legally in France but wanted to go to the UK
simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
negative. I agree with them if I agree with them,
and I don't have anyone blocked so I also see any contrary comments.
On 10/11/2026 4:47 pm, Keithr0 wrote:
On 10/11/2026 2:19 pm, alvey wrote:
Keithr0 wrote:
On 9/11/2026 2:45 pm, alvey wrote:
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes to >>>>>>> another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
Really? And why is that? Let's see some facts and not your
worthless opinion.
but it
doesn't seem to make any difference to you. All that you have ever >>>>>> contributed to this happy little band of brothers is noise.
When someone resorts to using Fraudsterisms then you know that
they're a hapless numpty.
Is that noise or filler, I suppose that it make little difference
anyway, just more of the same from you. Now, about some examples of
the thousands of photo restorations that you claim to have
made............
Asked to explain himself, apu Retcho slinks off.
Go away and stop bothering me.
Asked to explain himself, alvey just changes the subject.˙ Now, about
That wasn't a change of subject, that was a dismissal.
some examples of the thousands of photo restorations that you claim to
have made............
Keithr0 <nothing.to.see@here.com.au> wrote
alvey wrote
Keithr0 wrote
alvey wrote
Keithr0 wrote
alvey wrote
Keithr0 wrote
Xeno wrote
Keithr0 wrote
Xeno wrote
Noddy wrote
Axel wrote
Keithr0 wrote
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
Bullshit
What would you call it when someone attributes made-up quotes to >>>>>>> another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
Really? And why is that? Let's see some facts and not your
worthless opinion. but it
doesn't seem to make any difference to you. All that you have ever >>>>>> contributed to this happy little band of brothers is noise.
When someone resorts to using Fraudsterisms then you know that
they're a hapless numpty.
Is that noise or filler, I suppose that it make little difference
anyway, just more of the same from you. Now, about some examples of
the thousands of photo restorations that you claim to have
made............
˙Asked to explain himself, apu Retcho slinks off.
˙Go away and stop bothering me.
Asked to explain himself, alvey just changes the subject.
No subject has been changed
Now, about some examples of the thousands of photo restorations that
you claim to have made............
Now, about some examples of the countless
places you have claimed to have worked in...
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over >>>>>>>> yourself Keith!
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>> really cool idea, you buy the newspapers and you mark the bits >>>>>>>>>> that interest you. You might end up with a nice little
scrapbook.>
you are one of the ones that keep saying that anybody who makes >>>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>> asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to >>>>>> paper newspaper articles and never have. Why would I need to? It
is just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear. Taken
some time in 1967 during a CADFISS (Launch simulation). Obviously there isn't much going on at that time, Hugh Mccolgan and Ben Ryan are reading books, an I'm looking at a magazine (either Radio and Hobbies or
Scientific American)
You just did it above.he just stated that he'd seen news reports. talk about mountains out
of molehills
Saying that you've seen something somewhere is nothing like backing
up assertions with facts. One rules for xeno et al, another for the
rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is
what it is.
it does depend on what's said. "I watched a football match on TV on
Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to be
an accountant could be expected to show he is qualified as such.
On 10/11/2026 7:12 pm, Xeno wrote:
On 10/11/2026 4:47 pm, Keithr0 wrote:
On 10/11/2026 2:19 pm, alvey wrote:
Keithr0 wrote:
On 9/11/2026 2:45 pm, alvey wrote:
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes to >>>>>>>> another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
Really? And why is that? Let's see some facts and not your
worthless opinion.
but it
doesn't seem to make any difference to you. All that you have
ever contributed to this happy little band of brothers is noise.
When someone resorts to using Fraudsterisms then you know that
they're a hapless numpty.
Is that noise or filler, I suppose that it make little difference
anyway, just more of the same from you. Now, about some examples of >>>>> the thousands of photo restorations that you claim to have
made............
Asked to explain himself, apu Retcho slinks off.
Go away and stop bothering me.
Asked to explain himself, alvey just changes the subject.˙ Now, about
That wasn't a change of subject, that was a dismissal.
Only in your rather perverted mind.
some examples of the thousands of photo restorations that you claim
to have made............
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.>
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>>> asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to >>>>>>> paper newspaper articles and never have. Why would I need to? It >>>>>>> is just "news" after all, topical on the day, old news the next. >>>>>>> Important news becomes history, trivia is forgotten.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either Radio
and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
You just did it above.he just stated that he'd seen news reports. talk about mountains
out of molehills
Saying that you've seen something somewhere is nothing like backing
up assertions with facts. One rules for xeno et al, another for the
rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody else. >>>>>depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is
what it is.
it does depend on what's said. "I watched a football match on TV on
Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to be
an accountant could be expected to show he is qualified as such.
On 10/11/2026 7:11 pm, Xeno wrote:
Another hair gets split.
On 10/11/2026 4:44 pm, Keithr0 wrote:
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>> what he says, the problems are logistics and infrastructure, not >>>>>>>> violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>>
I have invented a name for you.. noddy's echo chamber. talk about >>>>>>> hoovering up. it's what you do. you buy everything he says hook, >>>>>>> line, and sinker. and you never get the facts because you have
the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Beg to differ, Islamophobia concentrates on religious practices.
Islamophobia is rooted in the fear of the difference.
On 10/11/2026 7:09 pm, Xeno wrote:
On 10/11/2026 4:32 pm, Keithr0 wrote:
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
I've never known anybody who could split hairs so finely.
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>
assertions. It makes yo a hypocrite when you demand the same
from anybody else.
I did not make an assertion, I made a declaration, a confirmation. >>>>>>
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to
trade qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust
engines.
The alternative is *external combustion* and that they ain't!>
Nit picking at it's finest.
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I >>>>>>> had seen, just the vague whereabouts, vague because specific
articles had long slipped my mind.
If you really feel the need, feel free to do a Google search,
it's not hard!
Jesus Christ. The fucking *irony* :)Yep, you're full of it! Bullshit too!
On 10/11/2026 1:43 pm, Clocky wrote:
On 6/11/2026 2:09 pm, Noddy wrote:
On 6/11/2026 9:20 am, Daryl wrote:
On 5/11/2026 8:42 pm, Noddy wrote:
LOL, if I had to eat fast food and I had lots of choices I'd pick
KFC is the worst for me. Just driving past the store here in town,
the *smell* coming out of the place makes me want to puke....
KFC, their zinger burgers are reasonable.
I'd rather starve to death :)
Something we can agree on. Disgusting shit, all of it.
I'll third that. and add overpriced as well.
my pet hate is Macca's. last time i was in their Traralgon east store 10 years ago, my wife requested a fillet of fish* a small fries and a $1.00 frozen drink. We didnt even get to what junior wanted.
Came to $9.45.!!! told 'em to jamb it where the sun dont shine and
walked out. Son was cut, mrs wasnt happy, but i'm not paying $10 bucks
for that shit.
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whereas you tend to be xeno's and alvey's echo chamber.
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:And you can only peruse those if you are subscribed. Get over
you are one of the ones that keep saying that anybody who makes >>>>>>>> an assertion needs to prove it. Anyway every newspaper in the >>>>>>>> country has a web edition, so no need for scrapbooks, just links. >>>>>>>
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>> see a need to mark things *you* find interesting. Here's a
really cool idea, you buy the newspapers and you mark the bits >>>>>>>>> that interest you. You might end up with a nice little scrapbook.> >>>>>>>>
yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when
asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are you
in communication with people who actually live there? Or are you
just hoovering up whatever fits your rather ignorant prejudices?
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence and
terrorism.
12 yrs ago when we were in Calais heading back to the UK the security
measures around the port were extreme, the people trying to get to
the UK were legally in France but wanted to go to the UK simply
because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook, line,
and sinker. and you never get the facts because you have the sensible
rational people blocked.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and >>>>>> especially in Australia but the problems are nothing like what he >>>>>> says, the problems are logistics and infrastructure, not violence >>>>>> and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying >>>>>> to get to the UK were legally in France but wanted to go to the UK >>>>>> simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of them
could supply even one example of the alleged racism, I'm sure. and
it's true what I said about Daryl. he should get the facts for himself
rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but Islamophobia tends to concentrate on particular races)
On 10/11/2026 3:01 pm, lindsay wrote:
Last Sunday I was in Gisborne around lunch time looking for something to eat, I went to one of the bakery's and had a steak and mushroom pie and
my pet hate is Macca's. last time i was in their Traralgon east store
10 years ago, my wife requested a fillet of fish* a small fries and a
$1.00 frozen drink. We didnt even get to what junior wanted.
Came to $9.45.!!! told 'em to jamb it where the sun dont shine and
walked out. Son was cut, mrs wasnt happy, but i'm not paying $10 bucks
for that shit.
an iced coffee drink, cost was just under $18.00, not cheap but the pie
had real steak chunks and was very good.
It would have been cheaper to go to Macca's but the difference in the quality of the food is night and day.
On 10/11/2026 4:44 pm, Keithr0 wrote:
On 10/11/2026 3:12 pm, Axel wrote:
i ignore him. he's just trying to push my buttons. and neither ofSo your obvious Islamophobia is not racism then (before any of your
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing up
the crap he reads or sees in the "news", he could also make an effort to actually read what I wrote before making idiotic comments.
Maybe he could start with telling us the last time he visited Europe.
On 10/11/2026 4:40 pm, Keithr0 wrote:
Whereas you tend to be xeno's and alvey's echo chamber.
He accuses me of echoing what Noddy says but that makes me think he
didn't read past the first sentence of my post.
Maybe he should get of his dumb arse and head OS and have a look for
himself or he could actually read what I wrote.
On 10/11/2026 4:44 pm, Keithr0 wrote:
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place and >>>>>>> especially in Australia but the problems are nothing like what he >>>>>>> says, the problems are logistics and infrastructure, not violence >>>>>>> and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying >>>>>>> to get to the UK were legally in France but wanted to go to the >>>>>>> UK simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about >>>>>> hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the >>>>>> sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing up
the crap he reads or sees in the "news", he could also make an effort to actually read what I wrote before making idiotic comments.
Maybe he could start with telling us the last time he visited Europe.
On 11/11/2026 9:02 am, Daryl wrote:
On 10/11/2026 3:01 pm, lindsay wrote:
Last Sunday I was in Gisborne around lunch time looking for something
my pet hate is Macca's. last time i was in their Traralgon east store
10 years ago, my wife requested a fillet of fish* a small fries and a
$1.00 frozen drink. We didnt even get to what junior wanted.
Came to $9.45.!!! told 'em to jamb it where the sun dont shine and
walked out. Son was cut, mrs wasnt happy, but i'm not paying $10
bucks for that shit.
to eat, I went to one of the bakery's and had a steak and mushroom pie
and an iced coffee drink, cost was just under $18.00, not cheap but
the pie had real steak chunks and was very good.
It would have been cheaper to go to Macca's but the difference in the
quality of the food is night and day.
If you like fish and chips, then the next time you're in Gizzy there's
an excellent fish & chip shop on the corner of the Main st and Hamilton
St. The wife and I stop there often and take a load over to the park and
eat on the grass.
On 10/11/2026 8:06 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
I've never known anybody who could split hairs so finely.
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>> over yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>
assertions. It makes yo a hypocrite when you demand the same
from anybody else.
I did not make an assertion, I made a declaration, a confirmation. >>>>>>
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to
trade qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust
engines.
they are
Suck suck.
On 10/11/2026 7:12 pm, Xeno wrote:
On 10/11/2026 4:47 pm, Keithr0 wrote:
On 10/11/2026 2:19 pm, alvey wrote:
Keithr0 wrote:
On 9/11/2026 2:45 pm, alvey wrote:
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes >>>>>>>> to another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho.
You never had the right to get on any moral high-horse alvo,
Really? And why is that? Let's see some facts and not your
worthless opinion.
but it
doesn't seem to make any difference to you. All that you have
ever contributed to this happy little band of brothers is noise.
When someone resorts to using Fraudsterisms then you know that
they're a hapless numpty.
Is that noise or filler, I suppose that it make little difference
anyway, just more of the same from you. Now, about some examples
of the thousands of photo restorations that you claim to have
made............
Asked to explain himself, apu Retcho slinks off.
Go away and stop bothering me.
Asked to explain himself, alvey just changes the subject. Now, about
That wasn't a change of subject, that was a dismissal.
Only in your rather perverted mind.
some examples of the thousands of photo restorations that you claim
to have made............
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:My dear fellow, I am merely stating facts. I didn't keep links
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.>
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave
when asked for the same. It's you that needs to get over yourself. >>>>>>>
to paper newspaper articles and never have. Why would I need to? >>>>>>> It is just "news" after all, topical on the day, old news the
next. Important news becomes history, trivia is forgotten.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
You just did it above.he just stated that he'd seen news reports. talk about mountains
out of molehills
Saying that you've seen something somewhere is nothing like backing
up assertions with facts. One rules for xeno et al, another for the
rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody else. >>>>>depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is
what it is.
it does depend on what's said. "I watched a football match on TV on
Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to be
an accountant could be expected to show he is qualified as such.
On 10/11/2026 10:27 pm, Keithr0 wrote:
On 10/11/2026 7:12 pm, Xeno wrote:
On 10/11/2026 4:47 pm, Keithr0 wrote:
On 10/11/2026 2:19 pm, alvey wrote:
Keithr0 wrote:
On 9/11/2026 2:45 pm, alvey wrote:
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:You never had the right to get on any moral high-horse alvo,
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes >>>>>>>>> to another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho. >>>>>>>>
Really? And why is that? Let's see some facts and not your
worthless opinion.
but itWhen someone resorts to using Fraudsterisms then you know that
doesn't seem to make any difference to you. All that you have >>>>>>>> ever contributed to this happy little band of brothers is noise. >>>>>>>
they're a hapless numpty.
Is that noise or filler, I suppose that it make little difference >>>>>> anyway, just more of the same from you. Now, about some examples
of the thousands of photo restorations that you claim to have
made............
Asked to explain himself, apu Retcho slinks off.
Go away and stop bothering me.
Asked to explain himself, alvey just changes the subject. Now, about
That wasn't a change of subject, that was a dismissal.
Only in your rather perverted mind.
Perverted? You're weird!
some examples of the thousands of photo restorations that you claim
to have made............
On 10/11/2026 10:49 pm, Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>> to paper newspaper articles and never have. Why would I need
to? It is just "news" after all, topical on the day, old news >>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
That could be anyone. No one can verify it for you.
I gave you a number I said was my trade registration number.
You said it could be anyone's or anything. Felix, for one, has seen
that number on my certificate.
On 10/11/2026 4:40 pm, Keithr0 wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whereas you tend to be xeno's and alvey's echo chamber.
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who
makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>> asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are
you in communication with people who actually live there? Or are
you just hoovering up whatever fits your rather ignorant prejudices? >>>>>
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence
and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying
to get to the UK were legally in France but wanted to go to the UK
simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
He accuses me of echoing what Noddy says but that makes me think he
didn't read past the first sentence of my post.
Maybe he should get of his dumb arse and head OS and have a look for
himself or he could actually read what I wrote.
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:
On 10/11/2026 3:12 pm, Axel wrote:
i ignore him. he's just trying to push my buttons. and neither ofSo your obvious Islamophobia is not racism then (before any of your
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing
up the crap he reads or sees in the "news", he could also make an
effort to actually read what I wrote before making idiotic comments.
Maybe he could start with telling us the last time he visited Europe.
I don't think he would ever go to Europe, as there'd be too many wogs
for him to deal with :)
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as an expatriate.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>> what he says, the problems are logistics and infrastructure,
not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>>
I have invented a name for you.. noddy's echo chamber. talk
about hoovering up. it's what you do. you buy everything he says >>>>>>> hook, line, and sinker. and you never get the facts because you >>>>>>> have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing
up the crap he reads or sees in the "news", he could also make an
effort to actually read what I wrote before making idiotic comments.
Maybe he could start with telling us the last time he visited Europe.
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who
makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>> asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to >>>>>> paper newspaper articles and never have. Why would I need to? It
is just "news" after all, topical on the day, old news the next.
Important news becomes history, trivia is forgotten.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either Radio
and Hobbies or Scientific American)
You just did it above.he just stated that he'd seen news reports. talk about mountains
out of molehills
Saying that you've seen something somewhere is nothing like backing
up assertions with facts. One rules for xeno et al, another for the
rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is
what it is.
it does depend on what's said. "I watched a football match on TV on
Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to be
an accountant could be expected to show he is qualified as such.
On 10/11/2026 7:53 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whereas you tend to be xeno's and alvey's echo chamber.
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.>
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave
when asked for the same. It's you that needs to get over yourself. >>>>>>>>
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are
you in communication with people who actually live there? Or are
you just hoovering up whatever fits your rather ignorant prejudices? >>>>>>
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and
especially in Australia but the problems are nothing like what he
says, the problems are logistics and infrastructure, not violence
and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying
to get to the UK were legally in France but wanted to go to the UK
simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
negative. I agree with them if I agree with them,
About 99% of the time.
and I don't have anyone blocked so I also see any contrary comments.Neither do I
On 10/11/2026 7:58 pm, Axel wrote:
Keithr0 wrote:That's your phobia speaking.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>> what he says, the problems are logistics and infrastructure,
not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>>
I have invented a name for you.. noddy's echo chamber. talk
about hoovering up. it's what you do. you buy everything he says >>>>>>> hook, line, and sinker. and you never get the facts because you >>>>>>> have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
a phobia is an irrational fear. there's nothing irrational about
being fully cognizant of the dangers of an ideology
Xeno wrote:
On 10/11/2026 10:49 pm, Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
That could be anyone. No one can verify it for you.
I gave you a number I said was my trade registration number.
You said it could be anyone's or anything. Felix, for one, has seen
that number on my certificate.
and he wouldn't take my word for it, so why should we take his
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal combust
engines.
they are
just stating a fact. you are wrong. live with it.
On 11/11/2026 4:05 pm, Axel wrote:
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal combust
engines.
they are
just stating a fact. you are wrong. live with it.
Claims the moron who can't tell the difference between AI and reality :)
Xeno wrote:
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as an
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>>> what he says, the problems are logistics and infrastructure, >>>>>>>>> not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>> security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>>>
I have invented a name for you.. noddy's echo chamber. talk
about hoovering up. it's what you do. you buy everything he says >>>>>>>> hook, line, and sinker. and you never get the facts because you >>>>>>>> have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he >>>>>>> nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure. >>>>> and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing
up the crap he reads or sees in the "news", he could also make an
effort to actually read what I wrote before making idiotic comments.
Maybe he could start with telling us the last time he visited Europe.
expatriate.
incredible that such things need to be explained
On 11/11/2026 4:05 pm, Axel wrote:
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal combust
engines.
they are
just stating a fact. you are wrong. live with it.
Claims the moron who can't tell the difference between AI and reality :)
On 10/11/2026 7:51 pm, Axel wrote:
Keithr0 wrote:I visited "Some countries" less than a month ago.
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who
makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>> asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are
you in communication with people who actually live there?
no I'm just following what's been reported in the media and online.
eg;
Italy: "Prime Minister Giorgia Meloni?s government has intensified
efforts to curb irregular migration and increase deportations,
centering its strategy on stricter border controls, controversial
offshore processing, and bilateral return agreements".
https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing a
national crisis because of its failure to successfully integrate
record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant
prejudices?
I suggest that applies to you. you're ignorant if you don't know
what's been happening, and prejudiced if you want to deny it
reading reports that may be coloured by the writers own views.
what first hand knowledge? are you (stupidly) suggesting that because
you visited some country at a particular time, that you're in a
better position to know what goes on there than the news media who
are reporting on political, economic, social, and cultural events
there on a daily basis?
Why do you think that I was posting from my iPad?
On 11/11/2026 4:05 pm, Axel wrote:
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal combust
engines.
they are
just stating a fact. you are wrong. live with it.
Claims the moron who can't tell the difference between AI and reality :)
Noddy wrote:
On 11/11/2026 4:05 pm, Axel wrote:
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal combust
engines.
they are
just stating a fact. you are wrong. live with it.
Claims the moron who can't tell the difference between AI and reality :)
have fun proving they're not, dumbass
Keithr0 wrote:
On 10/11/2026 7:51 pm, Axel wrote:
Keithr0 wrote:I visited "Some countries" less than a month ago.
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.>
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>>> asked for the same. It's you that needs to get over yourself.
he's just being silly. everyone who watches the news, or reads
newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are
you in communication with people who actually live there?
no I'm just following what's been reported in the media and online. >>>>> eg;
Italy: "Prime Minister Giorgia Meloni?s government has intensified
efforts to curb irregular migration and increase deportations,
centering its strategy on stricter border controls, controversial
offshore processing, and bilateral return agreements".
https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing a >>>>> national crisis because of its failure to successfully integrate
record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant
prejudices?
I suggest that applies to you. you're ignorant if you don't know
what's been happening, and prejudiced if you want to deny it
reading reports that may be coloured by the writers own views.
what first hand knowledge? are you (stupidly) suggesting that because
you visited some country at a particular time, that you're in a
better position to know what goes on there than the news media who
are reporting on political, economic, social, and cultural events
there on a daily basis?
so?
Why do you think that I was posting from my iPad?
am I supposed to know? maybe your laptop battery was flat, or your wife
got mad at you for spending too much time on it and threw it out the
kitchen window.
On 11/11/2026 11:13 pm, Axel wrote:Actually, in not correcting Keith's error, you highlighted your total
Noddy wrote:
On 11/11/2026 4:05 pm, Axel wrote:
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal combust >>>>>>> engines.
they are
just stating a fact. you are wrong. live with it.
Claims the moron who can't tell the difference between AI and reality :) >>>
have fun proving they're not, dumbass
I wasn't making any claims about jet engines one way or the other. I was just highlighting your inability to know :)
On 11/11/2026 11:13 pm, Axel wrote:
Noddy wrote:
On 11/11/2026 4:05 pm, Axel wrote:
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal combust >>>>>>> engines.
they are
just stating a fact. you are wrong. live with it.
Claims the moron who can't tell the difference between AI and
reality :)
have fun proving they're not, dumbass
I wasn't making any claims about jet engines one way or the other. I
was just highlighting your inability to know :)
On 11/11/2026 11:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 7:51 pm, Axel wrote:
Keithr0 wrote:I visited "Some countries" less than a month ago.
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
he's just being silly. everyone who watches the news, or reads >>>>>>>> newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are >>>>>>> you in communication with people who actually live there?
no I'm just following what's been reported in the media and
online. eg;
Italy: "Prime Minister Giorgia Meloni?s government has
intensified efforts to curb irregular migration and increase
deportations, centering its strategy on stricter border controls, >>>>>> controversial offshore processing, and bilateral return agreements". >>>>>> https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing >>>>>> a national crisis because of its failure to successfully
integrate record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant >>>>>>> prejudices?
I suggest that applies to you. you're ignorant if you don't know
what's been happening, and prejudiced if you want to deny it
reading reports that may be coloured by the writers own views.
what first hand knowledge? are you (stupidly) suggesting that
because you visited some country at a particular time, that you're
in a better position to know what goes on there than the news media
who are reporting on political, economic, social, and cultural
events there on a daily basis?
so?
Why do you think that I was posting from my iPad?
am I supposed to know? maybe your laptop battery was flat, or your wife
More to the point, why should anybody care?
got mad at you for spending too much time on it and threw it out the
kitchen window.
On 11/11/2026 11:36 pm, Noddy wrote:
On 11/11/2026 11:13 pm, Axel wrote:Actually, in not correcting Keith's error, you highlighted your total
Noddy wrote:
On 11/11/2026 4:05 pm, Axel wrote:
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal
combust engines.
they are
just stating a fact. you are wrong. live with it.
Claims the moron who can't tell the difference between AI and
reality :)
have fun proving they're not, dumbass
I wasn't making any claims about jet engines one way or the other. I
was just highlighting your inability to know :)
lack of knowledge of engines in general. Remember, you claimed to have
spent 3 years in an AME apprenticeship, *AME(engines) to be precise,
so, technically you should have known that jet engines and turbines
are *internal combustion engines*, the prime difference between piston engines being that turbines and jets employ continuous combustion.
It's Ok Darren, I know you never did any aircraft apprenticeship nor
any automotive apprenticeship - that was all a figment of your delusions.
some more of the evidence 'they' claim doesn't exist that he's not qualifed
Noddy wrote:
I wasn't making any claims about jet engines one way or the other. I
was just highlighting your inability to know :)
except that I did know so you just made a fool of yourself
On 12/11/2026 12:58 am, Axel wrote:
some more of the evidence 'they' claim doesn't exist that he's not
qualifed
ROTFL :)
On 12/11/2026 12:55 am, Axel wrote:
Noddy wrote:
I wasn't making any claims about jet engines one way or the other. I
was just highlighting your inability to know :)
except that I did know so you just made a fool of yourself
Actually Felix you *didn't* know. You had to look it up.
The above from the bloke who can't tell the difference between his
delusions and reality.
Noddy wrote:
On 12/11/2026 12:58 am, Axel wrote:
some more of the evidence 'they' claim doesn't exist that he's not
qualifed
ROTFL :)
so care to explain how someone who claims to have spent three years in
an AME apprenticeship doesn't know that jet engines are internal
combustion engines? as Xeno said..
"Actually, in not correcting Keith's error, you highlighted your total
lack of knowledge of engines in general. Remember, you claimed to have
spent 3 years in an AME apprenticeship, *AME(engines) to be precise, so, technically you should have known that jet engines and turbines are *internal combustion engines*, the prime difference between piston
engines being that turbines and jets employ continuous combustion. It's
Ok Darren, I know you never did any aircraft apprenticeship nor any automotive apprenticeship - that was all a figment of your delusions. "
Noddy wrote:
On 12/11/2026 12:55 am, Axel wrote:
Noddy wrote:
I wasn't making any claims about jet engines one way or the other. I
was just highlighting your inability to know :)
except that I did know so you just made a fool of yourself
Actually Felix you *didn't* know. You had to look it up.
amazing! no I didn't. only someone as stupid as you could believe that
he knows what other ppl think or do. but more to the point of the
matter, why did YOU not know?
Keithr0 wrote:
On 10/11/2026 8:06 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
I've never known anybody who could split hairs so finely.
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>>
assertions. It makes yo a hypocrite when you demand the same >>>>>>>>> from anybody else.
I did not make an assertion, I made a declaration, a confirmation. >>>>>>>
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to
trade qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust
engines.
they are
just stating a fact. you are wrong. live with it.
Suck suck.
has anyone ever told you you're an idiot? oh yes, they have!
On 11/11/2026 11:36 pm, Noddy wrote:
On 11/11/2026 11:13 pm, Axel wrote:Actually, in not correcting Keith's error, you highlighted your total
Noddy wrote:
On 11/11/2026 4:05 pm, Axel wrote:
Keithr0 wrote:
Nitpicking is your forte, viz jet engines being internal combust >>>>>>>> engines.
they are
just stating a fact. you are wrong. live with it.
Claims the moron who can't tell the difference between AI and
reality :)
have fun proving they're not, dumbass
I wasn't making any claims about jet engines one way or the other. I
was just highlighting your inability to know :)
lack of knowledge of engines in general. Remember, you claimed to have
spent 3 years in an AME apprenticeship, *AME(engines) to be precise, so, technically you should have known that jet engines and turbines are *internal combustion engines*, the prime difference between piston
engines being that turbines and jets employ continuous combustion. It's
Ok Darren, I know you never did any aircraft apprenticeship nor any automotive apprenticeship - that was all a figment of your delusions.
Xeno wrote:
On 10/11/2026 10:49 pm, Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
That could be anyone. No one can verify it for you.
I gave you a number I said was my trade registration number.
You said it could be anyone's or anything. Felix, for one, has seen
that number on my certificate.
and he wouldn't take my word for it, so why should we take his
Axel wrote:
Xeno wrote:
On 10/11/2026 10:49 pm, Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>>
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and >>>>> Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
That could be anyone. No one can verify it for you.
I gave you a number I said was my trade registration number.
You said it could be anyone's or anything. Felix, for one, has seen
that number on my certificate.
and he wouldn't take my word for it, so why should we take his
Why would anyone take the word of someone who invents quotes?
Credibility is a fragile thing and Retcho's is a just small pile of rubble
This whole shitfight started when xeno wanted to be a smartarse, the original distinction was quite clear, but, as usual, xeno wanted to
score a "Point" and prove what an intellectual genius he is (or thinks
he is) to his adoring followers.
On 12/11/2026 8:34 am, Axel wrote:
Noddy wrote:
On 12/11/2026 12:58 am, Axel wrote:
some more of the evidence 'they' claim doesn't exist that he's not
qualifed
ROTFL :)
so care to explain how someone who claims to have spent three years in
an AME apprenticeship doesn't know that jet engines are internal
combustion engines? as Xeno said..
Certainly Felix, and there are three parts to this bullshit that need to
be addressed in order to complete your edification on the matter.
1: Firstly, I spent 3 years in the aviation trade, which is not a long
time :)
2: I've never worked on a Jet engine in my life, and never even got
close to one. My trade experience was limited to working for a company
called "Fliteway Cessna" who's operations were based around small piston engined aircraft.
3: I made no comment either way about jet engines whatsoever, and your
claim that I'm unaware of what they are or how they operate is a
fignment of your mental mate's fucked up imagination.
See below:
"Actually, in not correcting Keith's error, you highlighted your total
lack of knowledge of engines in general. Remember, you claimed to have
spent 3 years in an AME apprenticeship, *AME(engines) to be precise,
so, technically you should have known that jet engines and turbines
are *internal combustion engines*, the prime difference between piston
engines being that turbines and jets employ continuous combustion.
It's Ok Darren, I know you never did any aircraft apprenticeship nor
any automotive apprenticeship - that was all a figment of your
delusions. "
The error in assumption here Felix is that (a) I was following the conversation, and (b) that I gave a fuck about anything that Keith said.
The *only* person I replied to was you, and not about engines of any
kind but about you trying to comment on technical matters about which
you have zero understanding :)
As he usually does, your mental maggot mate is trying his best to make something out of nothing.
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>> to paper newspaper articles and never have. Why would I need to? >>>>>>>> It is just "news" after all, topical on the day, old news the >>>>>>>> next. Important news becomes history, trivia is forgotten.
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over yourself. >>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
great! now all you have to do is (a) prove that's a NASA control room,
and (b) that the person you described is actually you.
You just did it above.he just stated that he'd seen news reports. talk about mountains
out of molehills
Saying that you've seen something somewhere is nothing like backing >>>>> up assertions with facts. One rules for xeno et al, another for the >>>>> rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody else. >>>>>>depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is
what it is.
it does depend on what's said. "I watched a football match on TV on
Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to be
an accountant could be expected to show he is qualified as such.
Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.>
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave when >>>>>>>> asked for the same. It's you that needs to get over yourself.
My dear fellow, I am merely stating facts. I didn't keep links to >>>>>>> paper newspaper articles and never have. Why would I need to? It >>>>>>> is just "news" after all, topical on the day, old news the next. >>>>>>> Important news becomes history, trivia is forgotten.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either Radio
and Hobbies or Scientific American)
You just did it above.he just stated that he'd seen news reports. talk about mountains
out of molehills
Saying that you've seen something somewhere is nothing like backing
up assertions with facts. One rules for xeno et al, another for the
rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody else. >>>>>depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is
what it is.
it does depend on what's said. "I watched a football match on TV on
Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to be
an accountant could be expected to show he is qualified as such.
did what?
Keithr0 wrote:
On 10/11/2026 7:58 pm, Axel wrote:
Keithr0 wrote:That's your phobia speaking.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>>> what he says, the problems are logistics and infrastructure, >>>>>>>>> not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>> security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>>>
I have invented a name for you.. noddy's echo chamber. talk
about hoovering up. it's what you do. you buy everything he says >>>>>>>> hook, line, and sinker. and you never get the facts because you >>>>>>>> have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he >>>>>>> nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure. >>>>> and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
a phobia is an irrational fear. there's nothing irrational about
being fully cognizant of the dangers of an ideology
impossible. I don't have one
On 12/11/2026 8:39 am, Axel wrote:
Noddy wrote:
On 12/11/2026 12:55 am, Axel wrote:
Noddy wrote:
I wasn't making any claims about jet engines one way or the other.
I was just highlighting your inability to know :)
except that I did know so you just made a fool of yourself
Actually Felix you *didn't* know. You had to look it up.
amazing! no I didn't. only someone as stupid as you could believe that
he knows what other ppl think or do. but more to the point of the
matter, why did YOU not know?
I did know Felix, and you are quite correct. They are indeed internal combustion engines. But I was never talking about that. I was talking
about you :)
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as an expatriate.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>> what he says, the problems are logistics and infrastructure, not >>>>>>>> violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>>
I have invented a name for you.. noddy's echo chamber. talk about >>>>>>> hoovering up. it's what you do. you buy everything he says hook, >>>>>>> line, and sinker. and you never get the facts because you have
the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he
nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure.
and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing up
the crap he reads or sees in the "news", he could also make an effort
to actually read what I wrote before making idiotic comments.
Maybe he could start with telling us the last time he visited Europe.
Keithr0 wrote:
On 10/11/2026 7:53 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whereas you tend to be xeno's and alvey's echo chamber.
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over yourself. >>>>>>>>>
he's just being silly. everyone who watches the news, or reads >>>>>>>> newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are >>>>>>> you in communication with people who actually live there? Or are >>>>>>> you just hoovering up whatever fits your rather ignorant prejudices? >>>>>>>
Most likely he reads or listens to "news" that fits in with his
racist right wing views.
Mass migration has and is causing problems all over the place and >>>>>> especially in Australia but the problems are nothing like what he >>>>>> says, the problems are logistics and infrastructure, not violence >>>>>> and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people trying >>>>>> to get to the UK were legally in France but wanted to go to the UK >>>>>> simply because the UK has very generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk about
hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have the
sensible rational people blocked.
negative. I agree with them if I agree with them,
About 99% of the time.
prove it
and I don't have anyone blocked so I also see any contrary comments.Neither do I
On 10/11/2026 10:27 pm, Keithr0 wrote:
On 10/11/2026 7:12 pm, Xeno wrote:
On 10/11/2026 4:47 pm, Keithr0 wrote:
On 10/11/2026 2:19 pm, alvey wrote:
Keithr0 wrote:
On 9/11/2026 2:45 pm, alvey wrote:
Keithr0 wrote:
On 8/11/2026 7:23 pm, alvey wrote:
Keithr0 wrote:You never had the right to get on any moral high-horse alvo,
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:
Keithr0 wrote:
So, illegal immigrants are terrorists?
some are. it's how they get into countries.
And your evidence of this is what exactly Felix?
Well, I have seen it in the daily news Darren.>
OK then show it.
Don't keep links to actual newspapers Keith. >
Cop out.
What would you call it when someone attributes made-up quotes >>>>>>>>> to another and then refuses to admit or retract Retcho?
You have lost the right to get on any moral high-horse Retcho. >>>>>>>>
Really? And why is that? Let's see some facts and not your
worthless opinion.
but itWhen someone resorts to using Fraudsterisms then you know that
doesn't seem to make any difference to you. All that you have >>>>>>>> ever contributed to this happy little band of brothers is noise. >>>>>>>
they're a hapless numpty.
Is that noise or filler, I suppose that it make little difference >>>>>> anyway, just more of the same from you. Now, about some examples
of the thousands of photo restorations that you claim to have
made............
Asked to explain himself, apu Retcho slinks off.
Go away and stop bothering me.
Asked to explain himself, alvey just changes the subject.˙ Now, about
That wasn't a change of subject, that was a dismissal.
Only in your rather perverted mind.
Perverted? You're weird!
some examples of the thousands of photo restorations that you claim
to have made............
On 11/11/2026 11:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 7:51 pm, Axel wrote:
Keithr0 wrote:I visited "Some countries" less than a month ago.
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over yourself. >>>>>>>>>
he's just being silly. everyone who watches the news, or reads >>>>>>>> newspapers or online, knows that immigration has caused huge
problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are >>>>>>> you in communication with people who actually live there?
no I'm just following what's been reported in the media and
online. eg;
Italy: "Prime Minister Giorgia Meloni?s government has intensified >>>>>> efforts to curb irregular migration and increase deportations,
centering its strategy on stricter border controls, controversial >>>>>> offshore processing, and bilateral return agreements".
https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing >>>>>> a national crisis because of its failure to successfully integrate >>>>>> record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant >>>>>>> prejudices?
I suggest that applies to you. you're ignorant if you don't know
what's been happening, and prejudiced if you want to deny it
reading reports that may be coloured by the writers own views.
what first hand knowledge? are you (stupidly) suggesting that
because you visited some country at a particular time, that you're
in a better position to know what goes on there than the news media
who are reporting on political, economic, social, and cultural
events there on a daily basis?
so?
Why do you think that I was posting from my iPad?
am I supposed to know? maybe your laptop battery was flat, or your wife
More to the point, why should anybody care?
got mad at you for spending too much time on it and threw it out the
kitchen window.
Xeno wrote:
On 11/11/2026 11:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 7:51 pm, Axel wrote:
Keithr0 wrote:I visited "Some countries" less than a month ago.
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>>> yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
he's just being silly. everyone who watches the news, or reads >>>>>>>>> newspapers or online, knows that immigration has caused huge >>>>>>>>> problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or are >>>>>>>> you in communication with people who actually live there?
no I'm just following what's been reported in the media and
online. eg;
Italy: "Prime Minister Giorgia Meloni?s government has
intensified efforts to curb irregular migration and increase
deportations, centering its strategy on stricter border controls, >>>>>>> controversial offshore processing, and bilateral return agreements". >>>>>>> https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is facing >>>>>>> a national crisis because of its failure to successfully
integrate record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather ignorant >>>>>>>> prejudices?
I suggest that applies to you. you're ignorant if you don't know >>>>>>> what's been happening, and prejudiced if you want to deny it
reading reports that may be coloured by the writers own views.
what first hand knowledge? are you (stupidly) suggesting that
because you visited some country at a particular time, that you're
in a better position to know what goes on there than the news media >>>>> who are reporting on political, economic, social, and cultural
events there on a daily basis?
so?
Why do you think that I was posting from my iPad?
am I supposed to know? maybe your laptop battery was flat, or your wife
More to the point, why should anybody care?
true
got mad at you for spending too much time on it and threw it out the
kitchen window.
On 11/11/2026 4:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
great! now all you have to do is (a) prove that's a NASA control room,
and (b) that the person you described is actually you.
(a) https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-landing- footage-sent-via-honeysuckle-creek/11273724
See the similarity?
(b) suit yourself, if you've been brainwashed enough not to believe it
then that's your problem.
Now what evidence do we have that you were in psych ecsliation in the army?
You just did it above.he just stated that he'd seen news reports. talk about mountains >>>>>>> out of molehills
Saying that you've seen something somewhere is nothing like
backing up assertions with facts. One rules for xeno et al,
another for the rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody >>>>>>>> else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is >>>>>> what it is.
it does depend on what's said. "I watched a football match on TV on >>>>> Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to
be an accountant could be expected to show he is qualified as such.
On 10/11/2026 10:07 pm, Keithr0 wrote:
On 10/11/2026 7:09 pm, Xeno wrote:
On 10/11/2026 4:32 pm, Keithr0 wrote:
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
I've never known anybody who could split hairs so finely.
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>>
assertions. It makes yo a hypocrite when you demand the same >>>>>>>>> from anybody else.
I did not make an assertion, I made a declaration, a confirmation. >>>>>>>
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to
trade qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust
engines.
The alternative is *external combustion* and that they ain't!>
Nit picking at it's finest.
Go educate yourself! You're an embarrassment. Here' Ill help!
https://en.wikipedia.org/wiki/Internal_combustion_engine
https://en.wikipedia.org/wiki/External_combustion_engine
Jeez, even AI knows the difference. Check out the 3rd item on number 3.
I'll pray for you, at your age it's the only thing left that gives hope!
AI Overview
Internal combustion (IC) engines are classified into several primary
types based on their ignition method, working cycles, design, and fuel.
1. By Method of Ignition
? Spark Ignition (SI) Engines: Burn a pre-mixed air-and-fuel charge
ignited by a spark plug (commonly running on petrol/gasoline or natural gas).
? Compression Ignition (CI) Engines: Compress only air to high pressure
and temperature, then inject diesel fuel which ignites spontaneously
under the heat (diesel engines).
2. By Working Cycle (Strokes)
? Four-Stroke Engines: Complete a full combustion cycle (intake, compression, power, exhaust) across four piston strokes (two crankshaft revolutions).
? Two-Stroke Engines: Complete the cycle in two piston strokes (one crankshaft revolution), offering a higher power-to-weight ratio.
? Six-Stroke Engines: Rare specialty variants that add extra expansion
or cooling strokes for efficiency.
3. By Engine Architecture & Design
? Reciprocating Piston Engines: Use traditional cylinders and pistons; further divided by layout into Inline, V-type, Boxer (Flat), and Radial arrangements.
? Rotary (Wankel) Engines: Replace reciprocating pistons with a
triangular rotating rotor inside an epitrochoidal chamber, offering a compact build and high power output.
? Continuous Combustion Engines: Unlike intermittent piston engines,
these burn fuel continuously (such as gas turbines and jet engines).
4. By Thermodynamic Cycle
? Otto Cycle: Operates at near-constant volume, standard for gasoline engines.
? Diesel Cycle: Operates at near-constant pressure, standard for
traditional diesel engines.
? Atkinson / Miller Cycle: Delays intake valve closure to boost
expansion ratio and fuel efficiency at the cost of peak power.
5. By Fuel Type
? Petrol / Gasoline
? Diesel
? Gaseous Fuels (Compressed Natural Gas - CNG, Liquefied Petroleum Gas - LPG, or biogas)
? Alternative / Dual-Fuel (Hydrogen, alcohol, or hybrid multi-fuel setups)
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what I >>>>>>>> had seen, just the vague whereabouts, vague because specific
articles had long slipped my mind.
If you really feel the need, feel free to do a Google search, >>>>>>>> it's not hard!
On 11/11/2026 8:11 pm, Axel wrote:
Keithr0 wrote:Demanded evidence obviously.
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>> to paper newspaper articles and never have. Why would I need to? >>>>>>>> It is just "news" after all, topical on the day, old news the >>>>>>>> next. Important news becomes history, trivia is forgotten.
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I don't >>>>>>>>>>>> see a need to mark things *you* find interesting. Here's a >>>>>>>>>>>> really cool idea, you buy the newspapers and you mark the >>>>>>>>>>>> bits that interest you. You might end up with a nice little >>>>>>>>>>>> scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over yourself. >>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
You just did it above.he just stated that he'd seen news reports. talk about mountains
out of molehills
Saying that you've seen something somewhere is nothing like backing >>>>> up assertions with facts. One rules for xeno et al, another for the >>>>> rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody else. >>>>>>depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is
what it is.
it does depend on what's said. "I watched a football match on TV on
Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to be
an accountant could be expected to show he is qualified as such.
did what?
Some whingeing fuckwit pom claiming to be
Keithr0 <nothing.to.see@here.com.au> wrote
just the puerile shit it always ends up with when
its got done like a fucking dinner, as it always is
On 11/11/2026 10:48 am, Xeno wrote:
Your point is?
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as an
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with his >>>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>>> what he says, the problems are logistics and infrastructure, >>>>>>>>> not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>> security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>>>
I have invented a name for you.. noddy's echo chamber. talk
about hoovering up. it's what you do. you buy everything he says >>>>>>>> hook, line, and sinker. and you never get the facts because you >>>>>>>> have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he >>>>>>> nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of
them could supply even one example of the alleged racism, I'm sure. >>>>> and it's true what I said about Daryl. he should get the facts for
himself rather than swallow up everything his idiot mate tells him.
mates jump in, yes I know that Islam is a religion not a race but
Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing
up the crap he reads or sees in the "news", he could also make an
effort to actually read what I wrote before making idiotic comments.
Maybe he could start with telling us the last time he visited Europe.
expatriate.
On 11/11/2026 12:02 am, Xeno wrote:
On 10/11/2026 10:07 pm, Keithr0 wrote:
On 10/11/2026 7:09 pm, Xeno wrote:
On 10/11/2026 4:32 pm, Keithr0 wrote:
On 9/11/2026 11:22 pm, Xeno wrote:
On 9/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 1:02 pm, Xeno wrote:
I've never known anybody who could split hairs so finely.
On 9/11/2026 11:00 am, Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
Cop out.
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. > >>>>>>>>>>>>>>>>
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every >>>>>>>>>>>>>> newspaper in the country has a web edition, so no need for >>>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>>> over yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep >>>>>>>>>>> links to paper newspaper articles and never have. Why would I >>>>>>>>>>> need to? It is just "news" after all, topical on the day, old >>>>>>>>>>> news the next. Important news becomes history, trivia is >>>>>>>>>>> forgotten.
assertions. It makes yo a hypocrite when you demand the same >>>>>>>>>> from anybody else.
I did not make an assertion, I made a declaration, a confirmation. >>>>>>>>
it was just a comment. you're just making a fuss to attack Xeno.
It would certainly seem that way. A petty nitpick yet he won't
address the elephant in the room - Darren's grandiose claims to
trade qualifications, those and others, all proven bullshit>
Nitpicking is your forte, viz jet engines being internal combust
engines.
The alternative is *external combustion* and that they ain't!>
Nit picking at it's finest.
Go educate yourself! You're an embarrassment. Here' Ill help!
https://en.wikipedia.org/wiki/Internal_combustion_engine
https://en.wikipedia.org/wiki/External_combustion_engine
Jeez, even AI knows the difference. Check out the 3rd item on number 3.
I'll pray for you, at your age it's the only thing left that gives hope!
AI Overview
Internal combustion (IC) engines are classified into several primary
types based on their ignition method, working cycles, design, and fuel.
1. By Method of Ignition
? Spark Ignition (SI) Engines: Burn a pre-mixed air-and-fuel charge
ignited by a spark plug (commonly running on petrol/gasoline or
natural gas).
? Compression Ignition (CI) Engines: Compress only air to high
pressure and temperature, then inject diesel fuel which ignites
spontaneously under the heat (diesel engines).
2. By Working Cycle (Strokes)
? Four-Stroke Engines: Complete a full combustion cycle (intake,
compression, power, exhaust) across four piston strokes (two
crankshaft revolutions).
? Two-Stroke Engines: Complete the cycle in two piston strokes (one
crankshaft revolution), offering a higher power-to-weight ratio.
? Six-Stroke Engines: Rare specialty variants that add extra expansion
or cooling strokes for efficiency.
3. By Engine Architecture & Design
? Reciprocating Piston Engines: Use traditional cylinders and pistons;
further divided by layout into Inline, V-type, Boxer (Flat), and
Radial arrangements.
? Rotary (Wankel) Engines: Replace reciprocating pistons with a
triangular rotating rotor inside an epitrochoidal chamber, offering a
compact build and high power output.
? Continuous Combustion Engines: Unlike intermittent piston engines,
these burn fuel continuously (such as gas turbines and jet engines).
4. By Thermodynamic Cycle
? Otto Cycle: Operates at near-constant volume, standard for gasoline
engines.
? Diesel Cycle: Operates at near-constant pressure, standard for
traditional diesel engines.
? Atkinson / Miller Cycle: Delays intake valve closure to boost
expansion ratio and fuel efficiency at the cost of peak power.
5. By Fuel Type
? Petrol / Gasoline
? Diesel
? Gaseous Fuels (Compressed Natural Gas - CNG, Liquefied Petroleum Gas
- LPG, or biogas)
? Alternative / Dual-Fuel (Hydrogen, alcohol, or hybrid multi-fuel
setups)
Outsourcing your knowledge to an AI? Well that's understandable because
you obviously have no direct knowledge of the subject, probably never
seen a naked jet engine˙ let alone laid hands on one definitely never
laid a spanner on on.
This is what I said;
Well, I have seen it in the daily news Darren.
Nothing more, nothing less. I didn't even specify exactly what >>>>>>>>> I had seen, just the vague whereabouts, vague because specific >>>>>>>>> articles had long slipped my mind.
If you really feel the need, feel free to do a Google search, >>>>>>>>> it's not hard!
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculously
stripped back that Sub to try and fit your argument, and still failed.
Feel free to cite the original comments so we can all look back and
laugh :)
Must be sad to be him when he has to drag up ancient arguments just to
have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
On 12/11/2026 8:39 am, Axel wrote:
Noddy wrote:
On 12/11/2026 12:55 am, Axel wrote:
Noddy wrote:
I wasn't making any claims about jet engines one way or the other.
I was just highlighting your inability to know :)
except that I did know so you just made a fool of yourself
Actually Felix you *didn't* know. You had to look it up.
amazing! no I didn't. only someone as stupid as you could believe that
he knows what other ppl think or do. but more to the point of the
matter, why did YOU not know?
I did know Felix, and you are quite correct. They are indeed internal combustion engines.
On 11/11/2026 4:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
great! now all you have to do is (a) prove that's a NASA control room,
and (b) that the person you described is actually you.
(a) https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-landing-footage-sent-via-honeysuckle-creek/11273724
See the similarity?
(b) suit yourself, if you've been brainwashed enough not to believe it
then that's your problem.
On 12/11/2026 11:23 am, Noddy wrote:
On 12/11/2026 8:34 am, Axel wrote:
Noddy wrote:
On 12/11/2026 12:58 am, Axel wrote:
some more of the evidence 'they' claim doesn't exist that he's not
qualifed
ROTFL :)
so care to explain how someone who claims to have spent three years
in an AME apprenticeship doesn't know that jet engines are internal
combustion engines? as Xeno said..
Certainly Felix, and there are three parts to this bullshit that need
to be addressed in order to complete your edification on the matter.
1: Firstly, I spent 3 years in the aviation trade, which is not a long
time :)
2: I've never worked on a Jet engine in my life, and never even got
close to one. My trade experience was limited to working for a company
Cessnas can have turboprops Darren. Very telling that you don't know
this. In fact, many models of Cessnas *only* come with a turboprop
engine, the PT6 in particular.
https://www.rtx.com/en/prattwhitney/products/general-aviation-engines/pt6a
called "Fliteway Cessna" who's operations were based around small
piston engined aircraft.
What a load of bollocks! Cessnas have long used the PT6 turboprop
engine. A turboprop is little more than a jet turbine with a prop
attached to the turbine. Continuous combustion process is the same.
FWIW, had you studied at RMIT for 3 years as an apprentice, as you
claim, you would have studied the basics of all aircraft engines and you would have done this from your very first year as an apprentice. Here's where your singular lack of experience as an apprentice is severely
letting you down. You did claim to be an AME(engines) apprentice and
that means you were signed up to study the lot. It's only after you
complete an AME apprenticeship that you do type ratings. Graeme, for instance, studied all but he specialised in turbines, mainly because he trained on the big boys, and maintained his type ratings on those. In
fact he is a leading specialist in Australia on the Cessna PT6 engines,
does a heap of work on the Cessna Caravans, the ones skydivers use to
get aloft. My experience flying in aircraft with the PT6 engines is in Indonesia with the DH Twin Otter.
And you wonder why people think you're a bullshit artist. You never came withing cooee of signing up for an AME apprenticeship Darren, you would
have needed good passes at year 10 to achieve that - and you squibbed
the year 9 exams. You were never in the race. If you ever worked for Fliteway Cessna, it could only have been as a cleaner or as a TA. You
simply didn't make the cut to be an apprentice.
But, hey, feel free to shoot me down in flames Darren, you know you want
to! You might like to explain, while you're at it, why there are no RMIT apprentice records in your name at PROV. That should be a hoot!>
3: I made no comment either way about jet engines whatsoever, and your
claim that I'm unaware of what they are or how they operate is a
fignment of your mental mate's fucked up imagination.
See below:
"Actually, in not correcting Keith's error, you highlighted your
total lack of knowledge of engines in general. Remember, you claimed
to have spent 3 years in an AME apprenticeship, *AME(engines) to be
precise, so, technically you should have known that jet engines and
turbines are *internal combustion engines*, the prime difference
between piston engines being that turbines and jets employ continuous
combustion. It's Ok Darren, I know you never did any aircraft
apprenticeship nor any automotive apprenticeship - that was all a
figment of your delusions. "
The error in assumption here Felix is that (a) I was following the
conversation, and (b) that I gave a fuck about anything that Keith said.
You read everything I post Darren. You've slipped up way to often to get away with denying it.
The *only* person I replied to was you, and not about engines of any
kind but about you trying to comment on technical matters about which
you have zero understanding :)
As he usually does, your mental maggot mate is trying his best to make
something out of nothing.
On 12/11/2026 10:09 am, Keithr0 wrote:
On 11/11/2026 4:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>>
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and >>>>> Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
great! now all you have to do is (a) prove that's a NASA control
room, and (b) that the person you described is actually you.
(a) https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-
landing-footage-sent-via-honeysuckle-creek/11273724
See the similarity?
Nope.
(b) suit yourself, if you've been brainwashed enough not to believe it
then that's your problem.
There is no evidenced that's you in the photos, there is no mention of
you and I don't see anyone that resembles you.
On Thu, 12 Nov 2026 13:09:22 +1100, Keithr0 <nothing.to.see@here.com.au> wrote:
On 11/11/2026 4:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>>
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and >>>>> Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
˙great! now all you have to do is (a) prove that's a NASA control
room, and (b) that the person you described is actually you.
(a) https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-
landing-footage-sent-via-honeysuckle-creek/11273724 See the similarity?
That's not even the same control room, or
even the same side of the fucking country
Doesn't prove that individual is you either
(b) suit yourself, if you've been brainwashed enough not to believe it
then that's your problem.
On 12/11/2026 1:09 pm, Keithr0 wrote:
On 11/11/2026 4:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>>
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and >>>>> Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
great! now all you have to do is (a) prove that's a NASA control
room, and (b) that the person you described is actually you.
(a) https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-
landing- footage-sent-via-honeysuckle-creek/11273724
See the similarity?
Nope, don't see your name either. What's more, I did see this in there;
"A team of Australians did what even the Americans could not do at the absolutely climactic moment of the whole Apollo program," he said.
No mention of a Pom in the woodwork at all.
(b) suit yourself, if you've been brainwashed enough not to believe it
then that's your problem.
Now what evidence do we have that you were in psych ecsliation in the
army?
You just did it above.he just stated that he'd seen news reports. talk about mountains >>>>>>>> out of molehills
Saying that you've seen something somewhere is nothing like
backing up assertions with facts. One rules for xeno et al,
another for the rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody >>>>>>>>> else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is >>>>>>> what it is.
it does depend on what's said. "I watched a football match on TV
on Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone >>>>>> proves they watched TV, well, you maybe, but a person claiming to >>>>>> be an accountant could be expected to show he is qualified as such. >>>>>>
On 12/11/2026 1:10 pm, Keithr0 wrote:
On 11/11/2026 8:11 pm, Axel wrote:
Keithr0 wrote:Demanded evidence obviously.
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
You just did it above.he just stated that he'd seen news reports. talk about mountains >>>>>>> out of molehills
Saying that you've seen something somewhere is nothing like
backing up assertions with facts. One rules for xeno et al,
another for the rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody >>>>>>>> else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is >>>>>> what it is.
it does depend on what's said. "I watched a football match on TV on >>>>> Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to
be an accountant could be expected to show he is qualified as such.
did what?
And you have yet to provide any substantive evidence.
On 12/11/2026 1:12 pm, Keithr0 wrote:
On 11/11/2026 10:48 am, Xeno wrote:
Your point is?
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as an
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of your >>>>> mates jump in, yes I know that Islam is a religion not a race but
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with >>>>>>>>>> his racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>>>> what he says, the problems are logistics and infrastructure, >>>>>>>>>> not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>>> security measures around the port were extreme, the people >>>>>>>>>> trying to get to the UK were legally in France but wanted to >>>>>>>>>> go to the UK simply because the UK has very generous welfare >>>>>>>>>> systems.
I have invented a name for you.. noddy's echo chamber. talk >>>>>>>>> about hoovering up. it's what you do. you buy everything he >>>>>>>>> says hook, line, and sinker. and you never get the facts
because you have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because he >>>>>>>> nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of >>>>>> them could supply even one example of the alleged racism, I'm
sure. and it's true what I said about Daryl. he should get the
facts for himself rather than swallow up everything his idiot mate >>>>>> tells him.
Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing
up the crap he reads or sees in the "news", he could also make an
effort to actually read what I wrote before making idiotic comments.
Maybe he could start with telling us the last time he visited Europe.
expatriate.
If you can't see the difference, more fool you.
Some whingeing fuckwit pom claiming to be
Keithr0 <nothing.to.see@here.com.au> wrote
just the puerile shit it always ends up with when
its got done like a fucking dinner, as it always is
On 6/11/2026 1:56 pm, Noddy wrote:
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculouslyFeel free to cite the original comments so we can all look back and
stripped back that Sub to try and fit your argument, and still failed. >>>>
laugh :)
Must be sad to be him when he has to drag up ancient arguments just
to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other
people have said, hypocrite. Case in point your nonsense above.
On 12/11/2026 1:19 pm, Xeno wrote:
On 12/11/2026 1:09 pm, Keithr0 wrote:
On 11/11/2026 4:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
Cop out.
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. > >>>>>>>>>>>>>>>>
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every >>>>>>>>>>>>>> newspaper in the country has a web edition, so no need for >>>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep >>>>>>>>>>> links to paper newspaper articles and never have. Why would I >>>>>>>>>>> need to? It is just "news" after all, topical on the day, old >>>>>>>>>>> news the next. Important news becomes history, trivia is >>>>>>>>>>> forgotten.
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear. >>>>>> Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan
and Ben Ryan are reading books, an I'm looking at a magazine
(either Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
great! now all you have to do is (a) prove that's a NASA control
room, and (b) that the person you described is actually you.
(a) https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-
landing- footage-sent-via-honeysuckle-creek/11273724
See the similarity?
Nope, don't see your name either. What's more, I did see this in there;
If you can't recognise the equipment is the same in both photos, you'd better hand your driving licence in, because you are obviously a menace
on the road.
"A team of Australians did what even the Americans could not do at the
absolutely climactic moment of the whole Apollo program," he said.
No mention of a Pom in the woodwork at all.
Strange that, because there were a lot of them at all the tracking
stations, it would appear that not enough locals could make the grade.
The entry requirements were rather more strict than those for mechanics.
So go away and ask your "Mate" (acquaintance) to show you a "Cessna
PT6", I'm sure that he could do with a laugh.
On 11/11/2026 4:13 pm, Axel wrote:
Xeno wrote:
On 10/11/2026 10:49 pm, Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep
links to paper newspaper articles and never have. Why would I >>>>>>>>>> need to? It is just "news" after all, topical on the day, old >>>>>>>>>> news the next. Important news becomes history, trivia is
forgotten.
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan
and Ben Ryan are reading books, an I'm looking at a magazine
(either Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
That could be anyone. No one can verify it for you.
I gave you a number I said was my trade registration number.
You said it could be anyone's or anything. Felix, for one, has seen
that number on my certificate.
and he wouldn't take my word for it, so why should we take his
You history of backing up everything that xeno says makes it suspect.
If xeno isn't prepared to put it out in the open then it doesn't exist.
On 11/11/2026 8:41 pm, alvey wrote:
Axel wrote:
Xeno wrote:
On 10/11/2026 10:49 pm, Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
Cop out.
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. > >>>>>>>>>>>>>>>>
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and >>>>>>>>>>>>>>> you mark the bits that interest you. You might end up >>>>>>>>>>>>>>> with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every >>>>>>>>>>>>>> newspaper in the country has a web edition, so no need >>>>>>>>>>>>>> for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep >>>>>>>>>>> links to paper newspaper articles and never have. Why would >>>>>>>>>>> I need to? It is just "news" after all, topical on the day, >>>>>>>>>>> old news the next. Important news becomes history, trivia is >>>>>>>>>>> forgotten.
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear. >>>>>> Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan
and Ben Ryan are reading books, an I'm looking at a magazine
(either Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
That could be anyone. No one can verify it for you.
I gave you a number I said was my trade registration number.
You said it could be anyone's or anything. Felix, for one, has seen
that number on my certificate.
and he wouldn't take my word for it, so why should we take his
Why would anyone take the word of someone who invents quotes?
Credibility is a fragile thing and Retcho's is a just small pile of
rubble
alvey's is just non-existant.
On Thu, 12 Nov 2026 15:27:07 +1100, Keithr0 <nothing.to.see@here.com.au> wrote:
On 12/11/2026 2:06 pm, Rod Speed wrote:
On Thu, 12 Nov 2026 13:09:22 +1100, Keithr0
<nothing.to.see@here.com.au> wrote:
On 11/11/2026 4:11 pm, Axel wrote:even the same side of the fucking country
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make >>>>>>>>>>> assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
Cop out.
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. > >>>>>>>>>>>>>>>>>
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and >>>>>>>>>>>>>>>> you mark the bits that interest you. You might end up >>>>>>>>>>>>>>>> with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every >>>>>>>>>>>>>>> newspaper in the country has a web edition, so no need >>>>>>>>>>>>>>> for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep >>>>>>>>>>>> links to paper newspaper articles and never have. Why would >>>>>>>>>>>> I need to? It is just "news" after all, topical on the day, >>>>>>>>>>>> old news the next. Important news becomes history, trivia is >>>>>>>>>>>> forgotten.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear. >>>>>>> Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan >>>>>>> and Ben Ryan are reading books, an I'm looking at a magazine
(either Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
˙great! now all you have to do is (a) prove that's a NASA control
room, and (b) that the person you described is actually you.
(a) https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-
landing-footage-sent-via-honeysuckle-creek/11273724 See the similarity? >>> ˙That's not even the same control room, or
So what, same equipment, same purpose, communicating with Apollo.
Doesn't prove that individual is you either
If you honestly that I give a flying fuck what you thing then you're
even more deluded than I gave you credit for.
Your clearly do given you posted the original photo that could be anyone
There is also no evidence that you ever worked at Orrorral Valley,
CSIRO DCR, or the ANU.
I wasn't ever stupid enough to claim there was any proof
(b) suit yourself, if you've been brainwashed enough not to believe
it then that's your problem.
On 12/11/2026 2:10 pm, Rod Speed wrote:~~~~~~~~~~
Some whingeing fuckwit pom claiming to be
Keithr0 <nothing.to.see@here.com.au> wrote
just the puerile shit it always ends up with when
its got done like a fucking dinner, as it always is
Rod proves the point.
On 12/11/2026 8:34 am, Axel wrote:
As he usually does, your mental maggot mate is trying his best to make something out of nothing.
Keithr0 wrote:~~~~~~~~~~~~~~~~~
On 11/11/2026 4:13 pm, Axel wrote:
Xeno wrote:
On 10/11/2026 10:49 pm, Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
Cop out.
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. > >>>>>>>>>>>>>>>>
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every >>>>>>>>>>>>>> newspaper in the country has a web edition, so no need for >>>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep >>>>>>>>>>> links to paper newspaper articles and never have. Why would I >>>>>>>>>>> need to? It is just "news" after all, topical on the day, old >>>>>>>>>>> news the next. Important news becomes history, trivia is >>>>>>>>>>> forgotten.
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear. >>>>>> Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan
and Ben Ryan are reading books, an I'm looking at a magazine
(either Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
That could be anyone. No one can verify it for you.
I gave you a number I said was my trade registration number.
You said it could be anyone's or anything. Felix, for one, has seen
that number on my certificate.
and he wouldn't take my word for it, so why should we take his
You history of backing up everything that xeno says makes it suspect.
so show where I've ever said anything that's untrue. bet you can't
If xeno isn't prepared to put it out in the open then it doesn't exist.
four ppl have seen it. myself, alvey, and clocky, and xeno of course, so you're calling all of us liars. no wonder no one takes you seriously.
On 11/11/2026 4:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
great! now all you have to do is (a) prove that's a NASA control
room, and (b) that the person you described is actually you.
(a) https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-landing-footage-sent-via-honeysuckle-creek/11273724
See the similarity?
(b) suit yourself, if you've been brainwashed enough not to believe it
then that's your problem.
Now what evidence do we have that you were in psych ecsliation in the
army?
You just did it above.he just stated that he'd seen news reports. talk about mountains >>>>>>> out of molehills
Saying that you've seen something somewhere is nothing like
backing up assertions with facts. One rules for xeno et al,
another for the rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody >>>>>>>> else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is >>>>>> what it is.
it does depend on what's said. "I watched a football match on TV
on Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to
be an accountant could be expected to show he is qualified as such.
On 11/11/2026 8:11 pm, Axel wrote:
Keithr0 wrote:Demanded evidence obviously.
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:Ok then, lets see some proof that you worked at NASA
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make assertions. >>>>
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists?
some are. it's how they get into countries. >>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>> makes an assertion needs to prove it. Anyway every newspaper >>>>>>>>>>> in the country has a web edition, so no need for scrapbooks, >>>>>>>>>>> just links.
And you can only peruse those if you are subscribed. Get over >>>>>>>>>> yourself Keith!
Get over myself? I find the hypocrisy there astounding. As
somebody who demands proof from others, you dodge and weave >>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>> to paper newspaper articles and never have. Why would I need
to? It is just "news" after all, topical on the day, old news >>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and
Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
You just did it above.he just stated that he'd seen news reports. talk about mountains
out of molehills
Saying that you've seen something somewhere is nothing like
backing up assertions with facts. One rules for xeno et al,
another for the rest of us.
it's ridiculous to suggest that someone should back up a simple
comment with evidence
It makes you a hypocrite when you demand the same from anybody
else.
depends what they're saying.
Nope, when you won't do what you demand from others, hypocrisy is
what it is.
it does depend on what's said. "I watched a football match on TV on
Saturday" is not in the same ball park as "I'm a qualified
accountant". no one would be silly enough to suggest that someone
proves they watched TV, well, you maybe, but a person claiming to
be an accountant could be expected to show he is qualified as such.
did what?
On 12/11/2026 10:09 am, Keithr0 wrote:
On 11/11/2026 4:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep links >>>>>>>>>> to paper newspaper articles and never have. Why would I need >>>>>>>>>> to? It is just "news" after all, topical on the day, old news >>>>>>>>>> the next. Important news becomes history, trivia is forgotten. >>>>>>>>>>
assertions.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear.
Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan and >>>>> Ben Ryan are reading books, an I'm looking at a magazine (either
Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
great! now all you have to do is (a) prove that's a NASA control
room, and (b) that the person you described is actually you.
(a)
https://www.abc.net.au/news/2019-07-19/nasa-apollo-11-moon-landing-footage-sent-via-honeysuckle-creek/11273724
See the similarity?
Nope.
(b) suit yourself, if you've been brainwashed enough not to believe it
then that's your problem.
There is no evidenced that's you in the photos, there is no mention of
you and I don't see anyone that resembles you.
On 11/11/2026 8:14 pm, Axel wrote:
Keithr0 wrote:No you have several.
On 10/11/2026 7:58 pm, Axel wrote:
Keithr0 wrote:That's your phobia speaking.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with >>>>>>>>>> his racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>>>> what he says, the problems are logistics and infrastructure, >>>>>>>>>> not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>>> security measures around the port were extreme, the people >>>>>>>>>> trying to get to the UK were legally in France but wanted to >>>>>>>>>> go to the UK simply because the UK has very generous welfare >>>>>>>>>> systems.
I have invented a name for you.. noddy's echo chamber. talk >>>>>>>>> about hoovering up. it's what you do. you buy everything he >>>>>>>>> says hook, line, and sinker. and you never get the facts
because you have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because >>>>>>>> he nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt!
i ignore him. he's just trying to push my buttons. and neither of >>>>>> them could supply even one example of the alleged racism, I'm
sure. and it's true what I said about Daryl. he should get the
facts for himself rather than swallow up everything his idiot
mate tells him.
your mates jump in, yes I know that Islam is a religion not a race
but Islamophobia tends to concentrate on particular races)
a phobia is an irrational fear. there's nothing irrational about
being fully cognizant of the dangers of an ideology
impossible. I don't have one
On 11/11/2026 8:14 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 7:53 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whereas you tend to be xeno's and alvey's echo chamber.
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>> over yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>> when asked for the same. It's you that needs to get over
yourself.
he's just being silly. everyone who watches the news, or reads >>>>>>>>> newspapers or online, knows that immigration has caused huge >>>>>>>>> problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or
are you in communication with people who actually live there? >>>>>>>> Or are you just hoovering up whatever fits your rather ignorant >>>>>>>> prejudices?
Most likely he reads or listens to "news" that fits in with his >>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place
and especially in Australia but the problems are nothing like
what he says, the problems are logistics and infrastructure, not >>>>>>> violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>
I have invented a name for you.. noddy's echo chamber. talk about >>>>>> hoovering up. it's what you do. you buy everything he says hook,
line, and sinker. and you never get the facts because you have
the sensible rational people blocked.
negative. I agree with them if I agree with them,
About 99% of the time.
prove it
Prove it! Prove it! Felix wants a cracker.
On 12/11/2026 12:55 am, Axel wrote:
Xeno wrote:
On 11/11/2026 11:11 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 7:51 pm, Axel wrote:
Keithr0 wrote:I visited "Some countries" less than a month ago.
On 9/11/2026 9:28 pm, Axel wrote:
Keithr0 wrote:So you don't believe that first hand knowledge is better than
On 8/11/2026 8:57 pm, Axel wrote:no I'm just following what's been reported in the media and
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
he's just being silly. everyone who watches the news, or
reads newspapers or online, knows that immigration has caused >>>>>>>>>> huge problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or >>>>>>>>> are you in communication with people who actually live there? >>>>>>>>
online. eg;
Italy: "Prime Minister Giorgia Meloni?s government has
intensified efforts to curb irregular migration and increase
deportations, centering its strategy on stricter border
controls, controversial offshore processing, and bilateral
return agreements".
https://www.youtube.com/watch?v=g-B7deeRCbM
Sweden: "The Scandinavian nation of 10.6 million people is
facing a national crisis because of its failure to successfully >>>>>>>> integrate record numbers of immigrants".
https://www.gisreportsonline.com/r/sweden-immigrants-crisis/
that's just a couple of links.
Or are you just hoovering up whatever fits your rather
ignorant prejudices?
I suggest that applies to you. you're ignorant if you don't
know what's been happening, and prejudiced if you want to deny it >>>>>>>>
reading reports that may be coloured by the writers own views.
what first hand knowledge? are you (stupidly) suggesting that
because you visited some country at a particular time, that
you're in a better position to know what goes on there than the
news media who are reporting on political, economic, social, and
cultural events there on a daily basis?
so?
Why do you think that I was posting from my iPad?
am I supposed to know? maybe your laptop battery was flat, or your
wife
More to the point, why should anybody care?
true
But you do apparently.
got mad at you for spending too much time on it and threw it out
the kitchen window.
On 12/11/2026 1:06 pm, Xeno wrote:
On 12/11/2026 11:23 am, Noddy wrote:
On 12/11/2026 8:34 am, Axel wrote:
Noddy wrote:
On 12/11/2026 12:58 am, Axel wrote:
some more of the evidence 'they' claim doesn't exist that he's not >>>>>> qualifed
ROTFL :)
so care to explain how someone who claims to have spent three years
in an AME apprenticeship doesn't know that jet engines are internal
combustion engines? as Xeno said..
Certainly Felix, and there are three parts to this bullshit that need
to be addressed in order to complete your edification on the matter.
1: Firstly, I spent 3 years in the aviation trade, which is not a
long time :)
2: I've never worked on a Jet engine in my life, and never even got
close to one. My trade experience was limited to working for a company
Cessnas can have turboprops Darren. Very telling that you don't know
this. In fact, many models of Cessnas *only* come with a turboprop
engine, the PT6 in particular.
https://www.rtx.com/en/prattwhitney/products/general-aviation-engines/
pt6a
called "Fliteway Cessna" who's operations were based around small
piston engined aircraft.
The smaller Cessnas are all piston engined, unless somebody had had a conversion done, none ever came out of the factory with a turbine engine.>
What a load of bollocks! Cessnas have long used the PT6 turboprop
engine. A turboprop is little more than a jet turbine with a prop
attached to the turbine. Continuous combustion process is the same.
Boolshit, the smaller Cessnas like the 150, 152, 172, 182, 206 and many legacy twins use piston engines, the 208 Caravan, 408 SkyCourier, and
425 Corsair/Conquest have factory fitted PT6s, they can be seen in the P210N, 404 Titan, and 421C Golden Eagle but they are 3rd party
conversions, the Citation uses turbofan engines.
FWIW, had you studied at RMIT for 3 years as an apprentice, as you
claim, you would have studied the basics of all aircraft engines and
you would have done this from your very first year as an apprentice.
Here's where your singular lack of experience as an apprentice is
severely letting you down. You did claim to be an AME(engines)
apprentice and that means you were signed up to study the lot. It's
only after you complete an AME apprenticeship that you do type
ratings. Graeme, for instance, studied all but he specialised in
turbines, mainly because he trained on the big boys, and maintained
his type ratings on those. In fact he is a leading specialist in
Australia on the Cessna PT6 engines,
Cessna PT6? The PT6 is made by Pratt & Whitney Canada
does a heap of work on the Cessna Caravans, the ones skydivers use to
get aloft. My experience flying in aircraft with the PT6 engines is in
Indonesia with the DH Twin Otter.
And you wonder why people think you're a bullshit artist. You never
came withing cooee of signing up for an AME apprenticeship Darren, you
would have needed good passes at year 10 to achieve that - and you
squibbed the year 9 exams. You were never in the race. If you ever
worked for Fliteway Cessna, it could only have been as a cleaner or as
a TA. You simply didn't make the cut to be an apprentice.
But, hey, feel free to shoot me down in flames Darren, you know you
want to! You might like to explain, while you're at it, why there are
no RMIT apprentice records in your name at PROV. That should be a hoot!>
3: I made no comment either way about jet engines whatsoever, andYou read everything I post Darren. You've slipped up way to often to
your claim that I'm unaware of what they are or how they operate is a
fignment of your mental mate's fucked up imagination.
See below:
"Actually, in not correcting Keith's error, you highlighted your
total lack of knowledge of engines in general. Remember, you claimed
to have spent 3 years in an AME apprenticeship, *AME(engines) to be
precise, so, technically you should have known that jet engines and
turbines are *internal combustion engines*, the prime difference
between piston engines being that turbines and jets employ
continuous combustion. It's Ok Darren, I know you never did any
aircraft apprenticeship nor any automotive apprenticeship - that was
all a figment of your delusions. "
The error in assumption here Felix is that (a) I was following the
conversation, and (b) that I gave a fuck about anything that Keith said. >>
get away with denying it.
The *only* person I replied to was you, and not about engines of any
kind but about you trying to comment on technical matters about which
you have zero understanding :)
As he usually does, your mental maggot mate is trying his best to
make something out of nothing.
On 12/11/2026 1:20 pm, Xeno wrote:
I have lived in 2 countries which were/are home, a third for a number of years as an expat, and a fourth where I have spend more than a year over several visits. So what's your point?
On 12/11/2026 1:12 pm, Keithr0 wrote:
On 11/11/2026 10:48 am, Xeno wrote:
Your point is?
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as an
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with >>>>>>>>>>> his racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>>>>> what he says, the problems are logistics and infrastructure, >>>>>>>>>>> not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>>>> security measures around the port were extreme, the people >>>>>>>>>>> trying to get to the UK were legally in France but wanted to >>>>>>>>>>> go to the UK simply because the UK has very generous welfare >>>>>>>>>>> systems.
I have invented a name for you.. noddy's echo chamber. talk >>>>>>>>>> about hoovering up. it's what you do. you buy everything he >>>>>>>>>> says hook, line, and sinker. and you never get the facts
because you have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because >>>>>>>>> he nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt! >>>>>>>>
i ignore him. he's just trying to push my buttons. and neither of >>>>>>> them could supply even one example of the alleged racism, I'm
sure. and it's true what I said about Daryl. he should get the
facts for himself rather than swallow up everything his idiot
mate tells him.
your mates jump in, yes I know that Islam is a religion not a race >>>>>> but Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just swallowing >>>>> up the crap he reads or sees in the "news", he could also make an
effort to actually read what I wrote before making idiotic comments. >>>>> Maybe he could start with telling us the last time he visited Europe. >>>>>
expatriate.
If you can't see the difference, more fool you.
No mention of a Pom in the woodwork at all.
Strange that, because there were a lot of them at all the tracking
stations, it would appear that not enough locals could make the grade.
The entry requirements were rather more strict than those for mechanics.
So go away and ask your "Mate" (acquaintance) to show you a "Cessna
PT6", I'm sure that he could do with a laugh.
LOL, Imaginary friends working on imaginary aircraft, sounds like a Xeno post:-)
On 12/11/2026 1:48 pm, Clocky wrote:
Not above telling lies yourself, then claiming it was a joke.Actually Paul, myself and others laughed how you ridiculously
stripped back that Sub to try and fit your argument, and still
failed.
Feel free to cite the original comments so we can all look back and >>>>> laugh :)
Must be sad to be him when he has to drag up ancient arguments just
to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other
people have said, hypocrite. Case in point your nonsense above.
https://imgur.com/a/oX5BY4o
Keithr0 wrote:
On 11/11/2026 8:41 pm, alvey wrote:
Axel wrote:
Xeno wrote:
On 10/11/2026 10:49 pm, Keithr0 wrote:
On 10/11/2026 10:20 pm, Keithr0 wrote:
On 10/11/2026 7:45 pm, Axel wrote:
Keithr0 wrote:
On 9/11/2026 9:03 pm, Axel wrote:
Keithr0 wrote:
On 8/11/2026 7:35 pm, Xeno wrote:
If you don't have the facts to back them up, don't make >>>>>>>>>>> assertions.
On 8/11/2026 6:45 pm, Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
Cop out.
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. > >>>>>>>>>>>>>>>>>
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and >>>>>>>>>>>>>>>> you mark the bits that interest you. You might end up >>>>>>>>>>>>>>>> with a nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every >>>>>>>>>>>>>>> newspaper in the country has a web edition, so no need >>>>>>>>>>>>>>> for scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>>>> over yourself Keith!
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>>>> yourself.
My dear fellow, I am merely stating facts. I didn't keep >>>>>>>>>>>> links to paper newspaper articles and never have. Why would >>>>>>>>>>>> I need to? It is just "news" after all, topical on the day, >>>>>>>>>>>> old news the next. Important news becomes history, trivia is >>>>>>>>>>>> forgotten.
Ok then, lets see some proof that you worked at NASA
There ya go, that's me in the centre with a headset over one ear. >>>>>>> Taken some time in 1967 during a CADFISS (Launch simulation).
Obviously there isn't much going on at that time, Hugh Mccolgan >>>>>>> and Ben Ryan are reading books, an I'm looking at a magazine
(either Radio and Hobbies or Scientific American)
Ooops, here is the link
https://imgur.com/a/WVrCBOs
That could be anyone. No one can verify it for you.
I gave you a number I said was my trade registration number.
You said it could be anyone's or anything. Felix, for one, has seen >>>>> that number on my certificate.
and he wouldn't take my word for it, so why should we take his
Why would anyone take the word of someone who invents quotes?
good point!
Credibility is a fragile thing and Retcho's is a just small pile of
rubble
alvey's is just non-existant.
it's a mile above yours.
On 12/11/2026 3:51 pm, Keithr0 wrote:
On 12/11/2026 1:20 pm, Xeno wrote:
I have lived in 2 countries which were/are home, a third for a number
On 12/11/2026 1:12 pm, Keithr0 wrote:
On 11/11/2026 10:48 am, Xeno wrote:
Your point is?
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as an >>>>> expatriate.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with >>>>>>>>>>>> his racist right wing views.
Mass migration has and is causing problems all over the >>>>>>>>>>>> place and especially in Australia but the problems are >>>>>>>>>>>> nothing like what he says, the problems are logistics and >>>>>>>>>>>> infrastructure, not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>>>>> security measures around the port were extreme, the people >>>>>>>>>>>> trying to get to the UK were legally in France but wanted to >>>>>>>>>>>> go to the UK simply because the UK has very generous welfare >>>>>>>>>>>> systems.
I have invented a name for you.. noddy's echo chamber. talk >>>>>>>>>>> about hoovering up. it's what you do. you buy everything he >>>>>>>>>>> says hook, line, and sinker. and you never get the facts >>>>>>>>>>> because you have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because >>>>>>>>>> he nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt! >>>>>>>>>
i ignore him. he's just trying to push my buttons. and neither >>>>>>>> of them could supply even one example of the alleged racism, I'm >>>>>>>> sure. and it's true what I said about Daryl. he should get the >>>>>>>> facts for himself rather than swallow up everything his idiot >>>>>>>> mate tells him.
your mates jump in, yes I know that Islam is a religion not a
race but Islamophobia tends to concentrate on particular races)
Maybe Felix should get the facts himself instead of just
swallowing up the crap he reads or sees in the "news", he could
also make an effort to actually read what I wrote before making
idiotic comments.
Maybe he could start with telling us the last time he visited Europe. >>>>>>
If you can't see the difference, more fool you.
of years as an expat, and a fourth where I have spend more than a year
over several visits. So what's your point?
Wasn't referring to you, not even directing that post at you.
Keithr0 wrote:
On 11/11/2026 8:14 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 7:53 pm, Axel wrote:
Keithr0 wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whereas you tend to be xeno's and alvey's echo chamber.
On 9/11/2026 11:03 am, Keithr0 wrote:
On 8/11/2026 8:57 pm, Axel wrote:
Keithr0 wrote:
On 7/11/2026 1:53 pm, Xeno wrote:
On 7/11/2026 9:36 am, Keithr0 wrote:
On 6/11/2026 11:16 pm, Xeno wrote:
On 6/11/2026 11:04 pm, Keithr0 wrote:
On 6/11/2026 10:44 pm, Xeno wrote:
On 6/11/2026 10:15 pm, Keithr0 wrote:
On 6/11/2026 6:00 pm, Xeno wrote:
OK then show it.
On 6/11/2026 5:06 pm, Noddy wrote:
On 6/11/2026 12:41 pm, Axel wrote:Well, I have seen it in the daily news Darren.> >>>>>>>>>>>>>>>>>
Keithr0 wrote:And your evidence of this is what exactly Felix? >>>>>>>>>>>>>>>>>>
So, illegal immigrants are terrorists? >>>>>>>>>>>>>>>>>>>>some are. it's how they get into countries. >>>>>>>>>>>>>>>>>>>
Don't keep links to actual newspapers Keith. >
Cop out.
No copout at all Keith. I read the newspapers daily, I >>>>>>>>>>>>>> don't see a need to mark things *you* find interesting. >>>>>>>>>>>>>> Here's a really cool idea, you buy the newspapers and you >>>>>>>>>>>>>> mark the bits that interest you. You might end up with a >>>>>>>>>>>>>> nice little scrapbook.>
you are one of the ones that keep saying that anybody who >>>>>>>>>>>>> makes an assertion needs to prove it. Anyway every
newspaper in the country has a web edition, so no need for >>>>>>>>>>>>> scrapbooks, just links.
And you can only peruse those if you are subscribed. Get >>>>>>>>>>>> over yourself Keith!>
Get over myself? I find the hypocrisy there astounding. As >>>>>>>>>>> somebody who demands proof from others, you dodge and weave >>>>>>>>>>> when asked for the same. It's you that needs to get over >>>>>>>>>>> yourself.
he's just being silly. everyone who watches the news, or reads >>>>>>>>>> newspapers or online, knows that immigration has caused huge >>>>>>>>>> problems in the UK and Europe
You know that how? Have you been to the UK and/or Europe, or >>>>>>>>> are you in communication with people who actually live there? >>>>>>>>> Or are you just hoovering up whatever fits your rather ignorant >>>>>>>>> prejudices?
Most likely he reads or listens to "news" that fits in with his >>>>>>>> racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>> what he says, the problems are logistics and infrastructure, not >>>>>>>> violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the
security measures around the port were extreme, the people
trying to get to the UK were legally in France but wanted to go >>>>>>>> to the UK simply because the UK has very generous welfare systems. >>>>>>>>
I have invented a name for you.. noddy's echo chamber. talk about >>>>>>> hoovering up. it's what you do. you buy everything he says hook, >>>>>>> line, and sinker. and you never get the facts because you have
the sensible rational people blocked.
negative. I agree with them if I agree with them,
About 99% of the time.
prove it
Prove it! Prove it! Felix wants a cracker.
squawk! keefy is an idiot! keefy is an idiot!! squawk!!
Keithr0 wrote:
On 11/11/2026 8:14 pm, Axel wrote:
Keithr0 wrote:No you have several.
On 10/11/2026 7:58 pm, Axel wrote:
Keithr0 wrote:That's your phobia speaking.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with >>>>>>>>>>> his racist right wing views.
Mass migration has and is causing problems all over the place >>>>>>>>>>> and especially in Australia but the problems are nothing like >>>>>>>>>>> what he says, the problems are logistics and infrastructure, >>>>>>>>>>> not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK the >>>>>>>>>>> security measures around the port were extreme, the people >>>>>>>>>>> trying to get to the UK were legally in France but wanted to >>>>>>>>>>> go to the UK simply because the UK has very generous welfare >>>>>>>>>>> systems.
I have invented a name for you.. noddy's echo chamber. talk >>>>>>>>>> about hoovering up. it's what you do. you buy everything he >>>>>>>>>> says hook, line, and sinker. and you never get the facts
because you have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because >>>>>>>>> he nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt! >>>>>>>>
i ignore him. he's just trying to push my buttons. and neither of >>>>>>> them could supply even one example of the alleged racism, I'm
sure. and it's true what I said about Daryl. he should get the
facts for himself rather than swallow up everything his idiot
mate tells him.
your mates jump in, yes I know that Islam is a religion not a race >>>>>> but Islamophobia tends to concentrate on particular races)
a phobia is an irrational fear. there's nothing irrational about
being fully cognizant of the dangers of an ideology
impossible. I don't have one
what are they?
On 12/11/2026 6:46 pm, Axel wrote:
Keithr0 wrote:Islamophobia
On 11/11/2026 8:14 pm, Axel wrote:
Keithr0 wrote:No you have several.
On 10/11/2026 7:58 pm, Axel wrote:
Keithr0 wrote:That's your phobia speaking.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with >>>>>>>>>>>> his racist right wing views.
Mass migration has and is causing problems all over the >>>>>>>>>>>> place and especially in Australia but the problems are >>>>>>>>>>>> nothing like what he says, the problems are logistics and >>>>>>>>>>>> infrastructure, not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK >>>>>>>>>>>> the security measures around the port were extreme, the >>>>>>>>>>>> people trying to get to the UK were legally in France but >>>>>>>>>>>> wanted to go to the UK simply because the UK has very >>>>>>>>>>>> generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk >>>>>>>>>>> about hoovering up. it's what you do. you buy everything he >>>>>>>>>>> says hook, line, and sinker. and you never get the facts >>>>>>>>>>> because you have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because >>>>>>>>>> he nailed the exact kind of racist old cunt that you are?
Darren, *YOU* are the most racist person here without a doubt! >>>>>>>>>
i ignore him. he's just trying to push my buttons. and neither >>>>>>>> of them could supply even one example of the alleged racism,
I'm sure. and it's true what I said about Daryl. he should get >>>>>>>> the facts for himself rather than swallow up everything his
idiot mate tells him.
your mates jump in, yes I know that Islam is a religion not a
race but Islamophobia tends to concentrate on particular races)
a phobia is an irrational fear. there's nothing irrational about
being fully cognizant of the dangers of an ideology
impossible. I don't have one
what are they?
for a start.
On 12/11/2026 7:21 pm, Xeno wrote:
The n why were you replying to me?
On 12/11/2026 3:51 pm, Keithr0 wrote:
On 12/11/2026 1:20 pm, Xeno wrote:
I have lived in 2 countries which were/are home, a third for a number
On 12/11/2026 1:12 pm, Keithr0 wrote:
On 11/11/2026 10:48 am, Xeno wrote:
Your point is?
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of >>>>>>>> your mates jump in, yes I know that Islam is a religion not a >>>>>>>> race but Islamophobia tends to concentrate on particular races) >>>>>>>
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in with >>>>>>>>>>>>> his racist right wing views.
Mass migration has and is causing problems all over the >>>>>>>>>>>>> place and especially in Australia but the problems are >>>>>>>>>>>>> nothing like what he says, the problems are logistics and >>>>>>>>>>>>> infrastructure, not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK >>>>>>>>>>>>> the security measures around the port were extreme, the >>>>>>>>>>>>> people trying to get to the UK were legally in France but >>>>>>>>>>>>> wanted to go to the UK simply because the UK has very >>>>>>>>>>>>> generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk >>>>>>>>>>>> about hoovering up. it's what you do. you buy everything he >>>>>>>>>>>> says hook, line, and sinker. and you never get the facts >>>>>>>>>>>> because you have the sensible rational people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt because >>>>>>>>>>> he nailed the exact kind of racist old cunt that you are? >>>>>>>>>>> Darren, *YOU* are the most racist person here without a doubt! >>>>>>>>>>
i ignore him. he's just trying to push my buttons. and neither >>>>>>>>> of them could supply even one example of the alleged racism, >>>>>>>>> I'm sure. and it's true what I said about Daryl. he should get >>>>>>>>> the facts for himself rather than swallow up everything his >>>>>>>>> idiot mate tells him.
Maybe Felix should get the facts himself instead of just
swallowing up the crap he reads or sees in the "news", he could >>>>>>> also make an effort to actually read what I wrote before making >>>>>>> idiotic comments.
Maybe he could start with telling us the last time he visited
Europe.
an expatriate.
If you can't see the difference, more fool you.
of years as an expat, and a fourth where I have spend more than a
year over several visits. So what's your point?
Wasn't referring to you, not even directing that post at you.
Keithr0 wrote:
IslamophobiaNo you have several.That's your phobia speaking.
impossible. I don't have one
what are they?
nope. I don't have an irrational fear of Islam. I just recognize it for
what it is, a dangerous ideology. would you want to live under Sharia law?
On 12/11/2026 11:24 am, Noddy wrote:
On 12/11/2026 8:39 am, Axel wrote:
Noddy wrote:
On 12/11/2026 12:55 am, Axel wrote:
Noddy wrote:
I wasn't making any claims about jet engines one way or the
other. I was just highlighting your inability to know :)
except that I did know so you just made a fool of yourself
Actually Felix you *didn't* know. You had to look it up.
amazing! no I didn't. only someone as stupid as you could believe
that he knows what other ppl think or do. but more to the point of
the matter, why did YOU not know?
I did know Felix, and you are quite correct. They are indeed internal
combustion engines. But I was never talking about that. I was talking
about you :)
But being such an *expert* on aircraft you should have been correcting Keith's misapprehensions - but you didn't. That was because you didn't
know then and just learnt from my posts on the topic
But being such an *expert* on aircraft you should have been correcting
Keith's misapprehensions - but you didn't. That was because you didn't
know then and just learnt from my posts on the topic
I agree
On 13/11/2026 6:20 am, Axel wrote:
There aren't many forms of external combustion engines around todayBut being such an *expert* on aircraft you should have been
correcting Keith's misapprehensions - but you didn't. That was
because you didn't know then and just learnt from my posts on the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned so many times now that even *you* could get it, I don't see this mental cunt's
posts unless someone echoes them like you just did, and I wasn't
following the thread.
All I saw was you comment about knowing that jet engines were internal combustion engines, and that made me laugh considering that you know
jack shit about jack shit :)
Peter Jason <pj@jostle.com> wrote
Axel <none@not.here> wrote
you have to really wonder about the younger generations. buying a coffee >>> in Maccas this morning I asked the young shop girl for two sugars. she
said "I only have four is that ok?" rather than say anything I just
replied yes. she gave me three.
Jeezuz, what's wrong with Nescafe?
Not a patch on real coffee
"sniff" Not all of the above are destitute.I don't even want to know what wanker-coffee costs!
Not everyone is a destitute dumpster diver
A real dumpster diver would scrounge coffee grounds
from the dumpsters and get real coffee for free
though you claim to be the aviation ace around here. Like everything about you, it's fake.
Phil Allison wrote:
On 13/11/2026 11:34 am, Xeno wrote:
though you claim to be the aviation ace around here. Like everything
about you, it's fake.
Hey Biggles, want to try and explain this?
(In aus.avaition)
Phil Allison wrote:
PA: "The voice recorder quite probably contains nothing useful, because
it records only for a limited time."
Xeno: "It will show *how* the plane ended its flight and that is the significant finding - manual control or autopilot plus fuel
levels/engine operational status." 19/01/17
PA:˙ "** No way will the CVR ever do that."
Xeno: "The CVR, no, it's not intended to do that."
PA: "Then why did you say it could ??"
(sound of the Running half man taking off down the corridor....)
Fucking wannabe know-it-all deadshit...
On 13/11/2026 11:34 am, Xeno wrote:
though you claim to be the aviation ace around here. Like everything
about you, it's fake.
Hey Biggles, want to try and explain this?
(In aus.avaition)
Phil Allison wrote:
PA: "The voice recorder quite probably contains nothing useful, because
it records only for a limited time."
Xeno: "It will show *how* the plane ended its flight and that is the significant finding - manual control or autopilot plus fuel
levels/engine operational status." 19/01/17
PA:˙ "** No way will the CVR ever do that."
Xeno: "The CVR, no, it's not intended to do that."
PA: "Then why did you say it could ??"
(sound of the Running half man taking off down the corridor....)
Fucking wannabe know-it-all deadshit...
On Thu, 05 Nov 2026 14:17:27 +1100, "Rod Speed"
<rod.speed.aaa@gmail.com> wrote:
Peter Jason <pj@jostle.com> wroteSo you believe all those swill ads about coffee? Typical!
Axel <none@not.here> wroteNot a patch on real coffee
you have to really wonder about the younger generations. buying a coffee >>>> in Maccas this morning I asked the young shop girl for two sugars. she >>>> said "I only have four is that ok?" rather than say anything I justJeezuz, what's wrong with Nescafe?
replied yes. she gave me three.
Nescafe is condensed coffee, granulated for convenience and well
beloved by the frugal.
I've heard the idle poor pay over $7 for a paper cup of "coffee", and
I've heard it's laced with xtra caffeine. AND enhanced with coffee fragrance.
"sniff" Not all of the above are destitute.I don't even want to know what wanker-coffee costs!Not everyone is a destitute dumpster diver
A real dumpster diver would scrounge coffee grounds
from the dumpsters and get real coffee for free
On 12/11/2026 4:03 pm, Keithr0 wrote:
On 12/11/2026 1:48 pm, Clocky wrote:
Not above telling lies yourself, then claiming it was a joke.Actually Paul, myself and others laughed how you ridiculously
stripped back that Sub to try and fit your argument, and still
failed.
Feel free to cite the original comments so we can all look back
and laugh :)
Must be sad to be him when he has to drag up ancient arguments just >>>>> to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other
people have said, hypocrite. Case in point your nonsense above.
https://imgur.com/a/oX5BY4o
He was asked to cite the relevant comments for all to see, but chose to
opt out of doing that. You don't need to be Einstein to work out why....
On 12/11/2026 9:35 pm, Axel wrote:
Keithr0 wrote:
IslamophobiaNo you have several.That's your phobia speaking.
impossible. I don't have one
what are they?
nope. I don't have an irrational fear of Islam. I just recognize it
for what it is, a dangerous ideology. would you want to live under
Sharia law?
ROTFL :)
Who do you know that does, Felix?
On 12/11/2026 1:48 pm, Clocky wrote:
On 6/11/2026 1:56 pm, Noddy wrote:Not above telling lies yourself, then claiming it was a joke.
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculously
stripped back that Sub to try and fit your argument, and still
failed.
Feel free to cite the original comments so we can all look back and >>>>> laugh :)
Must be sad to be him when he has to drag up ancient arguments just
to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other
people have said, hypocrite. Case in point your nonsense above.
https://imgur.com/a/oX5BY4o
Peter Jason wrote:
On Thu, 05 Nov 2026 14:17:27 +1100, "Rod Speed"
<rod.speed.aaa@gmail.com> wrote:
Peter Jason <pj@jostle.com> wroteSo you believe all those swill ads about coffee? Typical!
Axel <none@not.here> wroteNot a patch on real coffee
you have to really wonder about the younger generations. buying a coffee >>>>> in Maccas this morning I asked the young shop girl for two sugars. she >>>>> said "I only have four is that ok?" rather than say anything I justJeezuz, what's wrong with Nescafe?
replied yes. she gave me three.
Nescafe is condensed coffee, granulated for convenience and well
beloved by the frugal.
I've heard the idle poor pay over $7 for a paper cup of "coffee", and
I've heard it's laced with xtra caffeine. AND enhanced with coffee
fragrance.
"sniff" Not all of the above are destitute.I don't even want to know what wanker-coffee costs!Not everyone is a destitute dumpster diver
A real dumpster diver would scrounge coffee grounds
from the dumpsters and get real coffee for free
the difference between nescafe and coffee made from good quality arabica >beans is like chalk and cheese.? and if you have your own coffee
machine, it's nothing like $7 a cup
Peter Jason <pj@jostle.com> wrote
Axel <none@not.here> wrote
Peter Jason wrote
Rod Speed <rod.speed.aaa@gmail.com> wrote
Peter Jason <pj@jostle.com> wrote
Axel <none@not.here> wrote
you have to really wonder about the younger generations. buying a >>>>>>> coffee
in Maccas this morning I asked the young shop girl for two
sugars. she
said "I only have four is that ok?" rather than say anything I just >>>>>>> replied yes. she gave me three.
Jeezuz, what's wrong with Nescafe?
Not a patch on real coffee
So you believe all those swill ads about coffee?˙ Typical!
Nescafe is condensed coffee, granulated for convenience and well
beloved by the frugal.
I've heard the idle poor pay over $7 for a paper cup of "coffee", and
I've heard it's laced with xtra caffeine.˙ AND enhanced with coffee
fragrance.
I don't even want to know what˙˙ wanker-coffee costs!
Not everyone is a destitute dumpster diver"sniff" Not all of the above are destitute.
A real dumpster diver would scrounge coffee grounds
from the dumpsters and get real coffee for free
the difference between nescafe and coffee made from good quality arabica >>> beans is like chalk and cheese.˙ and if you have your own coffee
machine, it's nothing like $7 a cup
I see you need wizening up.
We'll see...
https://www.flavorist.com/flavor-compounds-and-methods-for-
formulating-coffee-flavors/
Chemists and engineers can alter "coffee" depending on marketeering
wankeries.
No need to with real coffee
They do this to make a market and to ensure flavor consistency.
Happens automatically with real coffee
All foor products are so engineered to give shelf life, better
profits, consistency and appearance.
Don't need anything like that with real coffee
Of course they're in league with the makers of coffee-machine
contraptions.
Don't need anything like that either when you
use the simple coffee machines the wogs have
been flogging for more than a century now that
are still trivially available from the wogs
Did you know hamburger fragrance is routinely sprayed on to meat
patties to give a stronger taste?
Irrelevant to what happens with real coffee
For coffee, the number of flavenoids therein can be compared to the
number, if not the type present in cigarette smoke!
That's what makes it real coffee
Wine and booze manufacturers do the same, with the addition of
antioxidants, color stabilizers, taste enhancers etc.
Doesn't happen with real coffee beens you
grind yourself before you make the coffee
BASF is renowned for the manufacture of food flavors, but they're shy
over publishing product sheets.˙˙ But if you're in the food business,
a salesman will call.
Ahd wog coffee bean suppiers tell him to go and fuck himself
Jeeezuz!
The wogs nailed that fucker up more than two millennia ago
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around today
But being such an *expert* on aircraft you should have been
correcting Keith's misapprehensions - but you didn't. That was
because you didn't know then and just learnt from my posts on the topic >>>>
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned so
many times now that even *you* could get it, I don't see this mental
cunt's posts unless someone echoes them like you just did, and I
wasn't following the thread.
All I saw was you comment about knowing that jet engines were internal
combustion engines, and that made me laugh considering that you know
jack shit about jack shit :)
Darren. The Rankine cycle steam engines of old are long gone, Stirling
cycle engines never made the cut, and the only place you are likely to
find an external combustion engines is in a thermal power station,
likely using a steam turbine. Even then, such power stations are more
likely to be IC turbines running on natural gas these days. Like these; https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced the
old Ruston diesel alternators of the 70s that I was familiar with.
You saw Keith's post, you failed to correct him, though you claim to be
the aviation ace around here. Like everything about you, it's fake.
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around today
But being such an *expert* on aircraft you should have been
correcting Keith's misapprehensions - but you didn't. That was
because you didn't know then and just learnt from my posts on the
topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned so
many times now that even *you* could get it, I don't see this mental
cunt's posts unless someone echoes them like you just did, and I
wasn't following the thread.
All I saw was you comment about knowing that jet engines were
internal combustion engines, and that made me laugh considering that
you know jack shit about jack shit :)
Darren. The Rankine cycle steam engines of old are long gone, Stirling
cycle engines never made the cut, and the only place you are likely to
find an external combustion engines is in a thermal power station,
likely using a steam turbine. Even then, such power stations are more
likely to be IC turbines running on natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced the
old Ruston diesel alternators of the 70s that I was familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim to
be the aviation ace around here. Like everything about you, it's fake.
You didn't correct me, the intent was quite clear, you just wanted to be
a smartarse. Nothing new there, it's what you do.
How the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics already
possessed fundamental knowledge of hydraulics, internal combustion
engines,
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that they
are both filled with oil.
"internal combustion engines" in the era quoted, internal combustion
engines had long gone from the airline business.
Have you looked lately? Planes still use *internal combustion*
engines. What don't you understand about jet engines and,
for that matter, turbo-prop engines? Both are internal
combustion engines.
The difference, in a piston engine the process involves 4 discrete
steps, in a turbine the process is continuous.
In a turbine air is drawn in through the inlet and squeezed to high
pressure by the compressor. Fuel is injected and burned inside the combustion chamber.
So, a jet (turbine) is indeed an internal combustion engine.
On 14/11/2026 9:11 am, Rod Speed wrote:
Peter Jason <pj@jostle.com> wrote
Axel <none@not.here> wrote
Peter Jason wrote
Rod Speed <rod.speed.aaa@gmail.com> wrote
Peter Jason <pj@jostle.com> wrote
Axel <none@not.here> wrote
you have to really wonder about the younger generations. buying a >>>>>>>> coffee
in Maccas this morning I asked the young shop girl for two
sugars. she
said "I only have four is that ok?" rather than say anything I just >>>>>>>> replied yes. she gave me three.
Jeezuz, what's wrong with Nescafe?
Not a patch on real coffee
So you believe all those swill ads about coffee?? Typical!
Nescafe is condensed coffee, granulated for convenience and well
beloved by the frugal.
I've heard the idle poor pay over $7 for a paper cup of "coffee", and >>>>> I've heard it's laced with xtra caffeine.? AND enhanced with coffee
fragrance.
I don't even want to know what?? wanker-coffee costs!
Not everyone is a destitute dumpster diver"sniff" Not all of the above are destitute.
A real dumpster diver would scrounge coffee grounds
from the dumpsters and get real coffee for free
the difference between nescafe and coffee made from good quality arabica >>>> beans is like chalk and cheese.? and if you have your own coffee
machine, it's nothing like $7 a cup
I see you need wizening up.
We'll see...
https://www.flavorist.com/flavor-compounds-and-methods-for-
formulating-coffee-flavors/
Chemists and engineers can alter "coffee" depending on marketeering
wankeries.
No need to with real coffee
They do this to make a market and to ensure flavor consistency.
Happens automatically with real coffee
All foor products are so engineered to give shelf life, better
profits, consistency and appearance.
Don't need anything like that with real coffee
Of course they're in league with the makers of coffee-machine
contraptions.
Don't need anything like that either when you
use the simple coffee machines the wogs have
been flogging for more than a century now that
are still trivially available from the wogs
Did you know hamburger fragrance is routinely sprayed on to meat
patties to give a stronger taste?
Irrelevant to what happens with real coffee
For coffee, the number of flavenoids therein can be compared to the
number, if not the type present in cigarette smoke!
That's what makes it real coffee
Wine and booze manufacturers do the same, with the addition of
antioxidants, color stabilizers, taste enhancers etc.
Doesn't happen with real coffee beens you
grind yourself before you make the coffee
BASF is renowned for the manufacture of food flavors, but they're shy
over publishing product sheets.?? But if you're in the food business,
a salesman will call.
Ahd wog coffee bean suppiers tell him to go and fuck himself
Jeeezuz!
The wogs nailed that fucker up more than two millennia ago
Of course the "Holy Grail of coffees", kopi luwak costing up to $1K/Kg
is actually shit.
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "be precise"..... >>>>In a globalised world, anything in any of the major player countries
will
have a knock on effect elsewhere. Only the most naive of people would
say
otherwise, especially in this social media connected planet. Start with
world parity oil prices and work your way outwards from there.
well said
Your mental mate loves throwing life savers for you, doesn't he? And you apparently aren't bothered by letting him speak for you :)
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "be precise"..... >>>>>In a globalised world, anything in any of the major player countries
will
have a knock on effect elsewhere. Only the most naive of people
would say
otherwise, especially in this social media connected planet. Start with >>>> world parity oil prices and work your way outwards from there.
well said
Your mental mate loves throwing life savers for you, doesn't he? And
you apparently aren't bothered by letting him speak for you :)
Until you work out how public newsgroups work - sit down boy.
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people
would say
otherwise, especially in this social media connected planet. Start
with
world parity oil prices and work your way outwards from there.
well said
Your mental mate loves throwing life savers for you, doesn't he? And
you apparently aren't bothered by letting him speak for you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers. (As now)
On 6/11/2026 2:00 pm, Noddy wrote:
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people
would say
otherwise, especially in this social media connected planet. Start
with
world parity oil prices and work your way outwards from there.
well said
Your mental mate loves throwing life savers for you, doesn't he? And
you apparently aren't bothered by letting him speak for you :)
Until you work out how public newsgroups work - sit down boy.
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people
would say
otherwise, especially in this social media connected planet. Start >>>>>> with
world parity oil prices and work your way outwards from there.
well said
Your mental mate loves throwing life savers for you, doesn't he? And
you apparently aren't bothered by letting him speak for you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers. (As now)
like you. most of your posts are just throwing shit. the rest are suck
ups to DATE members. oh, sorry. you're one!
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people >>>>>>> would say
otherwise, especially in this social media connected planet.
Start with
world parity oil prices and work your way outwards from there.
well said
Your mental mate loves throwing life savers for you, doesn't he?
And you apparently aren't bothered by letting him speak for you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers. (As
now)
like you. most of your posts are just throwing shit. the rest are suck
ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the cause
of it over decades is pure irony.
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around today
But being such an *expert* on aircraft you should have been
correcting Keith's misapprehensions - but you didn't. That was
because you didn't know then and just learnt from my posts on the >>>>>> topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned so
many times now that even *you* could get it, I don't see this mental
cunt's posts unless someone echoes them like you just did, and I
wasn't following the thread.
All I saw was you comment about knowing that jet engines were
internal combustion engines, and that made me laugh considering that
you know jack shit about jack shit :)
Darren. The Rankine cycle steam engines of old are long gone,
Stirling cycle engines never made the cut, and the only place you are
likely to find an external combustion engines is in a thermal power
station, likely using a steam turbine. Even then, such power stations
are more likely to be IC turbines running on natural gas these days.
Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced
the old Ruston diesel alternators of the 70s that I was familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim to
be the aviation ace around here. Like everything about you, it's fake.
You didn't correct me, the intent was quite clear, you just wanted to
be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a smartarse when I was discussing the AME training offer I had been made and
rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
How the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics already
possessed fundamental knowledge of hydraulics, internal combustion
engines,
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that they
are both filled with oil.
"internal combustion engines" in the era quoted, internal combustion
engines had long gone from the airline business.
I merely corrected your misapprehension.
After all, you're the one who
tinkers with planes as a *hobby*. You share your hobby, I imagine, with people who have a clue about *engines* in planes.
And all the above is something Darren, with his *claimed* experience in
the aviation field, could have said, but he remained silent, tellingly silent.
The error was yours, your posts he reads, or so he says,
therefore he saw your faux pas - and said nothing. The smartarse here
was you and it blew up in your face.
jonz wrote:~~~~~~~~~~~~~~
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people
would say
otherwise, especially in this social media connected planet. Start >>>>>> with
world parity oil prices and work your way outwards from there.
well said
Your mental mate loves throwing life savers for you, doesn't he? And
you apparently aren't bothered by letting him speak for you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers. (As now)
like you. most of your posts are just throwing shit. the rest are suck
ups to DATE members. oh, sorry. you're one!
On 12/11/2026 8:54 pm, Keithr0 wrote:
On 12/11/2026 7:21 pm, Xeno wrote:
The n why were you replying to me?
On 12/11/2026 3:51 pm, Keithr0 wrote:
On 12/11/2026 1:20 pm, Xeno wrote:
I have lived in 2 countries which were/are home, a third for a
On 12/11/2026 1:12 pm, Keithr0 wrote:
On 11/11/2026 10:48 am, Xeno wrote:
Your point is?
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as >>>>>>> an expatriate.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of >>>>>>>>> your mates jump in, yes I know that Islam is a religion not a >>>>>>>>> race but Islamophobia tends to concentrate on particular races) >>>>>>>>
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:Whatsa matta Felix? Suffering from a bit of butt hurt >>>>>>>>>>>> because he nailed the exact kind of racist old cunt that you >>>>>>>>>>>> are?
Most likely he reads or listens to "news" that fits in >>>>>>>>>>>>>> with his racist right wing views.
Mass migration has and is causing problems all over the >>>>>>>>>>>>>> place and especially in Australia but the problems are >>>>>>>>>>>>>> nothing like what he says, the problems are logistics and >>>>>>>>>>>>>> infrastructure, not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK >>>>>>>>>>>>>> the security measures around the port were extreme, the >>>>>>>>>>>>>> people trying to get to the UK were legally in France but >>>>>>>>>>>>>> wanted to go to the UK simply because the UK has very >>>>>>>>>>>>>> generous welfare systems.
I have invented a name for you.. noddy's echo chamber. talk >>>>>>>>>>>>> about hoovering up. it's what you do. you buy everything he >>>>>>>>>>>>> says hook, line, and sinker. and you never get the facts >>>>>>>>>>>>> because you have the sensible rational people blocked. >>>>>>>>>>>>
Darren, *YOU* are the most racist person here without a doubt! >>>>>>>>>>>
i ignore him. he's just trying to push my buttons. and neither >>>>>>>>>> of them could supply even one example of the alleged racism, >>>>>>>>>> I'm sure. and it's true what I said about Daryl. he should get >>>>>>>>>> the facts for himself rather than swallow up everything his >>>>>>>>>> idiot mate tells him.
Maybe Felix should get the facts himself instead of just
swallowing up the crap he reads or sees in the "news", he could >>>>>>>> also make an effort to actually read what I wrote before making >>>>>>>> idiotic comments.
Maybe he could start with telling us the last time he visited >>>>>>>> Europe.
If you can't see the difference, more fool you.
number of years as an expat, and a fourth where I have spend more
than a year over several visits. So what's your point?
Wasn't referring to you, not even directing that post at you.
Take a good careful close look above and, if you have a lucid moment,
you might just notice that I responded to *Daryl*.
On 12/11/2026 8:54 pm, Keithr0 wrote:
On 12/11/2026 7:21 pm, Xeno wrote:
On 12/11/2026 3:51 pm, Keithr0 wrote:
On 12/11/2026 1:20 pm, Xeno wrote:
On 12/11/2026 1:12 pm, Keithr0 wrote:
On 11/11/2026 10:48 am, Xeno wrote:
On 11/11/2026 9:11 am, Daryl wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people >>>>>>> would say
otherwise, especially in this social media connected planet.
Start with
world parity oil prices and work your way outwards from there.
well said
Your mental mate loves throwing life savers for you, doesn't he?
And you apparently aren't bothered by letting him speak for you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers. (As
now)
like you. most of your posts are just throwing shit. the rest are suck
ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the cause~~~~~~~~~~~~
of it over decades is pure irony.
On 12/11/2026 10:00 pm, Xeno wrote:
Take a good careful close look above and, if you have a lucid moment,
On 12/11/2026 8:54 pm, Keithr0 wrote:
On 12/11/2026 7:21 pm, Xeno wrote:
The n why were you replying to me?
On 12/11/2026 3:51 pm, Keithr0 wrote:
On 12/11/2026 1:20 pm, Xeno wrote:
I have lived in 2 countries which were/are home, a third for a
On 12/11/2026 1:12 pm, Keithr0 wrote:
On 11/11/2026 10:48 am, Xeno wrote:
Your point is?
On 11/11/2026 9:11 am, Daryl wrote:
On 10/11/2026 4:44 pm, Keithr0 wrote:Visiting a country is *not* the same as *living* in a country as >>>>>>>> an expatriate.
On 10/11/2026 3:12 pm, Axel wrote:
Xeno wrote:So your obvious Islamophobia is not racism then (before any of >>>>>>>>>> your mates jump in, yes I know that Islam is a religion not a >>>>>>>>>> race but Islamophobia tends to concentrate on particular races) >>>>>>>>>
On 10/11/2026 11:10 am, Noddy wrote:
On 10/11/2026 10:05 am, Axel wrote:
Daryl wrote:
Most likely he reads or listens to "news" that fits in >>>>>>>>>>>>>>> with his racist right wing views.
Mass migration has and is causing problems all over the >>>>>>>>>>>>>>> place and especially in Australia but the problems are >>>>>>>>>>>>>>> nothing like what he says, the problems are logistics and >>>>>>>>>>>>>>> infrastructure, not violence and terrorism.
12 yrs ago when we were in Calais heading back to the UK >>>>>>>>>>>>>>> the security measures around the port were extreme, the >>>>>>>>>>>>>>> people trying to get to the UK were legally in France but >>>>>>>>>>>>>>> wanted to go to the UK simply because the UK has very >>>>>>>>>>>>>>> generous welfare systems.
I have invented a name for you.. noddy's echo chamber. >>>>>>>>>>>>>> talk about hoovering up. it's what you do. you buy >>>>>>>>>>>>>> everything he says hook, line, and sinker. and you never >>>>>>>>>>>>>> get the facts because you have the sensible rational >>>>>>>>>>>>>> people blocked.
Whatsa matta Felix? Suffering from a bit of butt hurt >>>>>>>>>>>>> because he nailed the exact kind of racist old cunt that >>>>>>>>>>>>> you are?
Darren, *YOU* are the most racist person here without a doubt! >>>>>>>>>>>>
i ignore him. he's just trying to push my buttons. and
neither of them could supply even one example of the alleged >>>>>>>>>>> racism, I'm sure. and it's true what I said about Daryl. he >>>>>>>>>>> should get the facts for himself rather than swallow up >>>>>>>>>>> everything his idiot mate tells him.
Maybe Felix should get the facts himself instead of just
swallowing up the crap he reads or sees in the "news", he could >>>>>>>>> also make an effort to actually read what I wrote before making >>>>>>>>> idiotic comments.
Maybe he could start with telling us the last time he visited >>>>>>>>> Europe.
If you can't see the difference, more fool you.
number of years as an expat, and a fourth where I have spend more
than a year over several visits. So what's your point?
Wasn't referring to you, not even directing that post at you.
Take a good careful close look above and, if you have a lucid moment,
you might just notice that I responded to *Daryl*.
you might just notice that you responded me - Daryl's post is 3 levels down.
On 12/11/2026 8:54 pm, Keithr0 wrote:
On 12/11/2026 7:21 pm, Xeno wrote:
On 12/11/2026 3:51 pm, Keithr0 wrote:
On 12/11/2026 1:20 pm, Xeno wrote:
On 12/11/2026 1:12 pm, Keithr0 wrote:
On 11/11/2026 10:48 am, Xeno wrote:
On 11/11/2026 9:11 am, Daryl wrote:
On 12/11/2026 1:03 pm, Keithr0 wrote:
On 12/11/2026 1:48 pm, Clocky wrote:
On 6/11/2026 1:56 pm, Noddy wrote:Not above telling lies yourself, then claiming it was a joke.
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculously
stripped back that Sub to try and fit your argument, and still
failed.
Feel free to cite the original comments so we can all look back
and laugh :)
Must be sad to be him when he has to drag up ancient arguments just >>>>> to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other
people have said, hypocrite. Case in point your nonsense above.
You're not only above telling lies you make a habit of it, hypocrite.
https://imgur.com/a/oX5BY4o
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around today
But being such an *expert* on aircraft you should have been
correcting Keith's misapprehensions - but you didn't. That was
because you didn't know then and just learnt from my posts on the >>>>>>> topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned so
many times now that even *you* could get it, I don't see this
mental cunt's posts unless someone echoes them like you just did,
and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were
internal combustion engines, and that made me laugh considering
that you know jack shit about jack shit :)
Darren. The Rankine cycle steam engines of old are long gone,
Stirling cycle engines never made the cut, and the only place you
are likely to find an external combustion engines is in a thermal
power station, likely using a steam turbine. Even then, such power
stations are more likely to be IC turbines running on natural gas
these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced
the old Ruston diesel alternators of the 70s that I was familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim to
be the aviation ace around here. Like everything about you, it's fake.
You didn't correct me, the intent was quite clear, you just wanted to
be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been made
and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
How the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics already
possessed fundamental knowledge of hydraulics, internal combustion
engines,
The job of an aircraft mechanic is nothing like that of a car mechanic,
for one thing, according to both you and clocky, a car mechanic who
takes short cuts gets a bonus, an aircraft mechanic who does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that they
are both filled with oil.
Explain what is wrong with that statement.
"internal combustion engines" in the era quoted, internal combustion
engines had long gone from the airline business.
I merely corrected your misapprehension.
No misapprehension, the meaning was quite clear to anybody other than a
nit picking, point scoring pseudo intellectual.
After all, you're the one who tinkers with planes as a *hobby*. You
share your hobby, I imagine, with people who have a clue about
*engines* in planes.
<snipped the same old shit repeated yet again>
And all the above is something Darren, with his *claimed* experience
in the aviation field, could have said, but he remained silent,
tellingly silent.
His *claimed* experience in the aviation field would not have taken any nearer to a jet engine than you have been, I.E. not within yahoo.
The error was yours, your posts he reads, or so he says, therefore he
saw your faux pas - and said nothing. The smartarse here was you and
it blew up in your face.
You are making yourself look even more like a nit picking fool with
every post that you make.
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around
But being such an *expert* on aircraft you should have been
correcting Keith's misapprehensions - but you didn't. That was >>>>>>>> because you didn't know then and just learnt from my posts on >>>>>>>> the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned
so many times now that even *you* could get it, I don't see this
mental cunt's posts unless someone echoes them like you just did, >>>>>> and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were
internal combustion engines, and that made me laugh considering
that you know jack shit about jack shit :)
today Darren. The Rankine cycle steam engines of old are long
gone, Stirling cycle engines never made the cut, and the only
place you are likely to find an external combustion engines is in
a thermal power station, likely using a steam turbine. Even then,
such power stations are more likely to be IC turbines running on
natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced
the old Ruston diesel alternators of the 70s that I was familiar
with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim
to be the aviation ace around here. Like everything about you,
it's fake.
You didn't correct me, the intent was quite clear, you just wanted
to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been
made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
possessed fundamental knowledge of hydraulics, internal combustion
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic who
does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that they
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars. Throw in machinery hydraulics and you have just about
every option covered. What's more, some cars have very complex
hydraulic systems - Citroens for example, or Benz ABC hydraulic
suspensions. Of course there are differences in how they all operate
but the hydraulic fundamentals do not change. The only real difference
would be the degree of redundancy employed in aircraft hydraulic systems.
combustion"internal combustion engines" in the era quoted, internal
engines had long gone from the airline business.
I merely corrected your misapprehension.
No misapprehension, the meaning was quite clear to anybody other than
a nit picking, point scoring pseudo intellectual.
The only true and correct fact, internal combustion engines never left
the airline business.
But his training at RMIT (if it actually ever existed) would have seen
After all, you're the one who tinkers with planes as a *hobby*. You
share your hobby, I imagine, with people who have a clue about
*engines* in planes.
<snipped the same old shit repeated yet again>
And all the above is something Darren, with his *claimed* experience
in the aviation field, could have said, but he remained silent,
tellingly silent.
His *claimed* experience in the aviation field would not have taken
any nearer to a jet engine than you have been, I.E. not within yahoo.
him trained in all forms of propulsion used in planes, even if only at
the theory level. Recall, he claimed he completed all three years (he
didn't know about the 4th year). That alone is very telling.
The error was yours, your posts he reads, or so he says, therefore
he saw your faux pas - and said nothing. The smartarse here was you
and it blew up in your face.
You are making yourself look even more like a nit picking fool with
every post that you make.
only a dickhead like him would think that way. normal ppl would see it
for what it was, simply agreement.
On 13/11/2026 4:00 pm, Clocky wrote:
On 12/11/2026 1:03 pm, Keithr0 wrote:
On 12/11/2026 1:48 pm, Clocky wrote:
On 6/11/2026 1:56 pm, Noddy wrote:Not above telling lies yourself, then claiming it was a joke.
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculously >>>>>>>> stripped back that Sub to try and fit your argument, and still >>>>>>>> failed.
Feel free to cite the original comments so we can all look back >>>>>>> and laugh :)
Must be sad to be him when he has to drag up ancient arguments
just to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other
people have said, hypocrite. Case in point your nonsense above.
You're not only above telling lies you make a habit of it, hypocrite.
In your own words, prove it.
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people >>>>>>>> would say
otherwise, especially in this social media connected planet.
Start with
world parity oil prices and work your way outwards from there. >>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't he?
And you apparently aren't bothered by letting him speak for you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers. (As
now)
like you. most of your posts are just throwing shit. the rest are
suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the cause
of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see it
for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a question, then that specific person would answer it. What is *not*
"normal" is for some loud mouthed know it all cunt to answer for you on
the basis of them assuming you're not capable of answering it yourself.
Still, if that's how your happy to roll :)
On 13/11/2026 4:00 pm, Clocky wrote:
On 12/11/2026 1:03 pm, Keithr0 wrote:
On 12/11/2026 1:48 pm, Clocky wrote:
On 6/11/2026 1:56 pm, Noddy wrote:Not above telling lies yourself, then claiming it was a joke.
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculously >>>>>>>> stripped back that Sub to try and fit your argument, and still >>>>>>>> failed.
Feel free to cite the original comments so we can all look back >>>>>>> and laugh :)
Must be sad to be him when he has to drag up ancient arguments
just to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other
people have said, hypocrite. Case in point your nonsense above.
You're not only above telling lies you make a habit of it, hypocrite.
In your own words, prove it.
https://imgur.com/a/oX5BY4o
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people >>>>>>>> would say
otherwise, especially in this social media connected planet.
Start with
world parity oil prices and work your way outwards from there. >>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't he?
And you apparently aren't bothered by letting him speak for you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers. (As
now)
like you. most of your posts are just throwing shit. the rest are
suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the cause
of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
On 15/11/2026 2:45 pm, Keithr0 wrote:
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Noddy isn't licensed and neither are you so what are you on about you
silly prick?
On 16/11/2026 12:52 am, Clocky wrote:No, they just stopped you getting *any ticket* because you didn't meet
On 15/11/2026 2:45 pm, Keithr0 wrote:
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Noddy isn't licensed and neither are you so what are you on about you
silly prick?
That's right. Fortunately I live in a state where you don't have to demonstrate a complete lack of understanding about something as basic as windscreen glass to get a "speshul ticket".
Keithr0 wrote:
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:˙˙˙ 100%
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of
people would say
otherwise, especially in this social media connected planet. >>>>>>>>> Start with
world parity oil prices and work your way outwards from there. >>>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't he? >>>>>>> And you apparently aren't bothered by letting him speak for you :) >>>>> ~~~~~~~~~~~
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers.
(As now)
like you. most of your posts are just throwing shit. the rest are
suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the
cause of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Nope. Wrong again Retcho.
Neither of the two biggest sneering egomaniacs here, one of whom is
also by far the most abusive, have a mechanics licence. Yep, you and Fraudster. So your bleat is rubbish.
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see
it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a question, then that specific person would answer it.
Noddy wrote:~~~~~~~
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see
it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a
question, then that specific person would answer it. What is *not*
"normal" is for some loud mouthed know it all cunt to answer for you
on the basis of them assuming you're not capable of answering it
yourself.
Still, if that's how your happy to roll :)
And in the eternal fight between Fraudster Vs The World, the latest
score is; Fraudster 0, The World boatloads.
Noddy wrote:~~~~~~~~~~~~~~~
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see
it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a
question, then that specific person would answer it.
after several decades of posting in public forums you still don't
understand how they work. and you call others stupid
<crude abuse deleted>
Noddy wrote:
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see
it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a
question, then that specific person would answer it.
after several decades of posting in public forums you still don't
understand how they work. and you call others stupid
On 15-Nov-26 9:54 PM, alvey wrote:
And in the eternal fight between Fraudster Vs The World, the latest~~~~~~~
score is; Fraudster 0, The World boatloads.
Speak of the devil, here`s one of those *loud mouthed cunts* doing its thing, right now!. ???
Noddy wrote:
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see
it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a
question, then that specific person would answer it. What is *not*
"normal" is for some loud mouthed know it all cunt to answer for you
on the basis of them assuming you're not capable of answering it
yourself.
Still, if that's how your happy to roll :)
And in the eternal fight between Fraudster Vs The World, the latest
score is; Fraudster 0, The World boatloads.
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
Completely irrelevant to anything being discussed.
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around today >>>>> Darren. The Rankine cycle steam engines of old are long gone,
But being such an *expert* on aircraft you should have been
correcting Keith's misapprehensions - but you didn't. That was >>>>>>>> because you didn't know then and just learnt from my posts on >>>>>>>> the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned so >>>>>> many times now that even *you* could get it, I don't see this
mental cunt's posts unless someone echoes them like you just did, >>>>>> and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were
internal combustion engines, and that made me laugh considering
that you know jack shit about jack shit :)
Stirling cycle engines never made the cut, and the only place you
are likely to find an external combustion engines is in a thermal
power station, likely using a steam turbine. Even then, such power
stations are more likely to be IC turbines running on natural gas
these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced
the old Ruston diesel alternators of the 70s that I was familiar with. >>>>
You saw Keith's post, you failed to correct him, though you claim
to be the aviation ace around here. Like everything about you, it's >>>>> fake.
You didn't correct me, the intent was quite clear, you just wanted
to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been
made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
How the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics already >>> ˙>>> possessed fundamental knowledge of hydraulics, internal combustion
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic who
does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that they
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
every option covered. What's more, some cars have very complex hydraulic systems - Citroens for example, or Benz ABC hydraulic suspensions. Of
course there are differences in how they all operate but the hydraulic fundamentals do not change.
The only real difference would be the degree
of redundancy employed in aircraft hydraulic systems.
"internal combustion engines" in the era quoted, internal combustion >>> ˙>> engines had long gone from the airline business.
I merely corrected your misapprehension.
No misapprehension, the meaning was quite clear to anybody other than
a nit picking, point scoring pseudo intellectual.
The only true and correct fact, internal combustion engines never left
the airline business.
But his training at RMIT (if it actually ever existed) would have seenAfter all, you're the one who tinkers with planes as a *hobby*. You
share your hobby, I imagine, with people who have a clue about
*engines* in planes.
<snipped the same old shit repeated yet again>
And all the above is something Darren, with his *claimed* experience
in the aviation field, could have said, but he remained silent,
tellingly silent.
His *claimed* experience in the aviation field would not have taken
any nearer to a jet engine than you have been, I.E. not within yahoo.
him trained in all forms of propulsion used in planes, even if only at
the theory level. Recall, he claimed he completed all three years (he
didn't know about the 4th year). That alone is very telling.
The error was yours, your posts he reads, or so he says, therefore he
saw your faux pas - and said nothing. The smartarse here was you and
it blew up in your face.
You are making yourself look even more like a nit picking fool with
every post that you make.
On 16/11/2026 9:23 am, Axel wrote:
Noddy wrote:
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see
it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a
question, then that specific person would answer it.
after several decades of posting in public forums you still don't
understand how they work. and you call others stupid
I understand how they work just fine Felix,
but you rolling out this tired old bullshit every time your mouthpiece > acts as your spokesperson doesn't make it right.
Nor does it make you look like anything other than a sock puppet who is capable of speaking for himself.
Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around
But being such an *expert* on aircraft you should have been >>>>>>>>> correcting Keith's misapprehensions - but you didn't. That was >>>>>>>>> because you didn't know then and just learnt from my posts on >>>>>>>>> the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned >>>>>>> so many times now that even *you* could get it, I don't see this >>>>>>> mental cunt's posts unless someone echoes them like you just did, >>>>>>> and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were
internal combustion engines, and that made me laugh considering >>>>>>> that you know jack shit about jack shit :)
today Darren. The Rankine cycle steam engines of old are long
gone, Stirling cycle engines never made the cut, and the only
place you are likely to find an external combustion engines is in >>>>>> a thermal power station, likely using a steam turbine. Even then, >>>>>> such power stations are more likely to be IC turbines running on
natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced >>>>>> the old Ruston diesel alternators of the 70s that I was familiar
with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim >>>>>> to be the aviation ace around here. Like everything about you,
it's fake.
You didn't correct me, the intent was quite clear, you just wanted
to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been
made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
possessed fundamental knowledge of hydraulics, internal combustion >>>> ˙>>> engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic who
does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that they >>>> ˙>> are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars. Throw in machinery hydraulics and you have just about
every option covered. What's more, some cars have very complex
hydraulic systems - Citroens for example, or Benz ABC hydraulic
suspensions. Of course there are differences in how they all operate
but the hydraulic fundamentals do not change. The only real difference
would be the degree of redundancy employed in aircraft hydraulic systems. >>>
combustion"internal combustion engines" in the era quoted, internal
engines had long gone from the airline business.
I merely corrected your misapprehension.
No misapprehension, the meaning was quite clear to anybody other than
a nit picking, point scoring pseudo intellectual.
The only true and correct fact, internal combustion engines never left
the airline business.
But his training at RMIT (if it actually ever existed) would have seen
After all, you're the one who tinkers with planes as a *hobby*. You
share your hobby, I imagine, with people who have a clue about
*engines* in planes.
<snipped the same old shit repeated yet again>
And all the above is something Darren, with his *claimed* experience
in the aviation field, could have said, but he remained silent,
tellingly silent.
His *claimed* experience in the aviation field would not have taken
any nearer to a jet engine than you have been, I.E. not within yahoo.
him trained in all forms of propulsion used in planes, even if only at
the theory level. Recall, he claimed he completed all three years (he
didn't know about the 4th year). That alone is very telling.
The error was yours, your posts he reads, or so he says, therefore
he saw your faux pas - and said nothing. The smartarse here was you
and it blew up in your face.
You are making yourself look even more like a nit picking fool with
every post that you make.
I suggest anyone reading the thread would conclude it's not Xeno being a smartarse nit picker.
Keithr0 wrote:
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:˙˙˙ 100%
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people >>>>>>>>> would say
otherwise, especially in this social media connected planet. >>>>>>>>> Start with
world parity oil prices and work your way outwards from there. >>>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't he? >>>>>>> And you apparently aren't bothered by letting him speak for you :) >>>>> ~~~~~~~~~~~
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers.
(As now)
like you. most of your posts are just throwing shit. the rest are
suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the
cause of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Nope. Wrong again Retcho.
Neither of the two biggest sneering egomaniacs here, one of whom is also
by far the most abusive, have a mechanics licence. Yep, you and
Fraudster. So your bleat is rubbish.
On 15/11/2026 2:45 pm, Keithr0 wrote:
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:˙˙˙ 100%
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "beIn a globalised world, anything in any of the major player
precise".....
countries will
have a knock on effect elsewhere. Only the most naive of people >>>>>>>>> would say
otherwise, especially in this social media connected planet. >>>>>>>>> Start with
world parity oil prices and work your way outwards from there. >>>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't he? >>>>>>> And you apparently aren't bothered by letting him speak for you :) >>>>> ~~~~~~~~~~~
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus
Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the
years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers.
(As now)
like you. most of your posts are just throwing shit. the rest are
suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the
cause of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Noddy isn't licensed and neither are you so what are you on about you
silly prick?
Noddy wrote:
On 16/11/2026 9:23 am, Axel wrote:
Noddy wrote:
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see >>>>> it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a
question, then that specific person would answer it.
after several decades of posting in public forums you still don't
understand how they work. and you call others stupid
I understand how they work just fine Felix,
Clearly you don't.
but you rolling out this tired old bullshit every time your mouthpiece
acts as your spokesperson doesn't make it right.
This makes even less sense than the usual Fraudster garbling.
Nor does it make you look like anything other than a sock puppet who
is capable of speaking for himself.
And this is just hilarious.
*IN*capable Fraudster. hahahahahaha. What a buffoon.
Tell everyone again how your English is "pretty good"...
On 15/11/2026 9:31 pm, alvey wrote:
Keithr0 wrote:
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "be >>>>>>>>>>> precise".....In a globalised world, anything in any of the major player >>>>>>>>>> countries will
have a knock on effect elsewhere. Only the most naive of
people would say
otherwise, especially in this social media connected planet. >>>>>>>>>> Start with
world parity oil prices and work your way outwards from there. >>>>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't
he? And you apparently aren't bothered by letting him speak for >>>>>>>> you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA
Aus Cars, is dead but won`t lie down.....Populated (in part) by
some textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over
the years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers.
(As now)
like you. most of your posts are just throwing shit. the rest are
suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the
cause of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Nope. Wrong again Retcho.
Neither of the two biggest sneering egomaniacs here, one of whom is
also by far the most abusive, have a mechanics licence. Yep, you and
Fraudster. So your bleat is rubbish.
Try writing that in some known language.
On 15/11/2026 8:34 pm, Xeno wrote:
You obviously know nothing about aircraft hydraulics.
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around
But being such an *expert* on aircraft you should have been >>>>>>>>> correcting Keith's misapprehensions - but you didn't. That was >>>>>>>>> because you didn't know then and just learnt from my posts on >>>>>>>>> the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned >>>>>>> so many times now that even *you* could get it, I don't see this >>>>>>> mental cunt's posts unless someone echoes them like you just did, >>>>>>> and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were
internal combustion engines, and that made me laugh considering >>>>>>> that you know jack shit about jack shit :)
today Darren. The Rankine cycle steam engines of old are long
gone, Stirling cycle engines never made the cut, and the only
place you are likely to find an external combustion engines is in >>>>>> a thermal power station, likely using a steam turbine. Even then, >>>>>> such power stations are more likely to be IC turbines running on
natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced >>>>>> the old Ruston diesel alternators of the 70s that I was familiar
with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim >>>>>> to be the aviation ace around here. Like everything about you,
it's fake.
You didn't correct me, the intent was quite clear, you just wanted
to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been
made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
possessed fundamental knowledge of hydraulics, internal combustion >>>> ˙>>> engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic who
does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that they >>>> ˙>> are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
˙Throw in machinery hydraulics and you have just about
every option covered. What's more, some cars have very complex
hydraulic systems - Citroens for example, or Benz ABC hydraulic
suspensions. Of course there are differences in how they all operate
but the hydraulic fundamentals do not change.
Do you want to specify the percentage of mechanics that have come in
contact with the Citroen, or Mercedes suspension systems in Australia.
One of the reasons that the DS series never became popular here is the
lack of places where they could be maintained.
The only similarity is that all hydraulic systems are filled with incompressible fluid that can be used to transmit force from one place
to another, with a minimum amount of losses.
The only real difference would be the degree
of redundancy employed in aircraft hydraulic systems.
You obviously know nothing about aircraft hydraulics.
You don't seem to know anything about dynamic hydraulics, where the flow
of the working fluid is as important as the pressure. Bet you can't
explain the action of a swashplate motor and why you'd use one without googling it
combustion"internal combustion engines" in the era quoted, internal
engines had long gone from the airline business.
I merely corrected your misapprehension.
No misapprehension, the meaning was quite clear to anybody other than
a nit picking, point scoring pseudo intellectual.
The only true and correct fact, internal combustion engines never left
the airline business.
Split hairs all you like, but the jet engine is nothing like the piston engines that it has replaced.
But his training at RMIT (if it actually ever existed) would have seenAfter all, you're the one who tinkers with planes as a *hobby*. You
share your hobby, I imagine, with people who have a clue about
*engines* in planes.
<snipped the same old shit repeated yet again>
And all the above is something Darren, with his *claimed* experience
in the aviation field, could have said, but he remained silent,
tellingly silent.
His *claimed* experience in the aviation field would not have taken
any nearer to a jet engine than you have been, I.E. not within yahoo.
him trained in all forms of propulsion used in planes, even if only at
the theory level. Recall, he claimed he completed all three years (he
didn't know about the 4th year). That alone is very telling.
Not interested in your obsession with noddy.
The error was yours, your posts he reads, or so he says, therefore
he saw your faux pas - and said nothing. The smartarse here was you
and it blew up in your face.
You are making yourself look even more like a nit picking fool with
every post that you make.
On 16/11/2026 2:43 pm, alvey wrote:
Noddy wrote:
On 16/11/2026 9:23 am, Axel wrote:
Noddy wrote:
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would
see it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked
a question, then that specific person would answer it.
after several decades of posting in public forums you still don't
understand how they work. and you call others stupid
I understand how they work just fine Felix,
Clearly you don't.
but you rolling out this tired old bullshit every time your
mouthpiece > acts as your spokesperson doesn't make it right.
This makes even less sense than the usual Fraudster garbling.
Nor does it make you look like anything other than a sock puppet who
is capable of speaking for himself.
And this is just hilarious.
*IN*capable Fraudster. hahahahahaha. What a buffoon.
Tell everyone again how your English is "pretty good"...
Jeeze, the white noise around here is deafening.
Keithr0 wrote:
On 15/11/2026 9:31 pm, alvey wrote:
Keithr0 wrote:
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:~~~~~~~~~~~
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "be >>>>>>>>>>>> precise".....In a globalised world, anything in any of the major player >>>>>>>>>>> countries will
have a knock on effect elsewhere. Only the most naive of >>>>>>>>>>> people would say
otherwise, especially in this social media connected planet. >>>>>>>>>>> Start with
world parity oil prices and work your way outwards from there. >>>>>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't >>>>>>>>> he? And you apparently aren't bothered by letting him speak for >>>>>>>>> you :)
˙˙˙ 100%
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA
Aus Cars, is dead but won`t lie down.....Populated (in part) by >>>>>>> some textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over
the years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers. >>>>>>> (As now)
like you. most of your posts are just throwing shit. the rest are >>>>>> suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the
cause of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Nope. Wrong again Retcho.
Neither of the two biggest sneering egomaniacs here, one of whom is
also by far the most abusive, have a mechanics licence. Yep, you and
Fraudster. So your bleat is rubbish.
Try writing that in some known language.
makes perfect sense to me
On 16/11/2026 2:52 pm, Keithr0 wrote:
On 16/11/2026 2:43 pm, alvey wrote:
Noddy wrote:
On 16/11/2026 9:23 am, Axel wrote:
Noddy wrote:
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would >>>>>>> see it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked >>>>>> a question, then that specific person would answer it.
after several decades of posting in public forums you still don't
understand how they work. and you call others stupid
I understand how they work just fine Felix,
Clearly you don't.
but you rolling out this tired old bullshit every time your
mouthpiece > acts as your spokesperson doesn't make it right.
This makes even less sense than the usual Fraudster garbling.
Nor does it make you look like anything other than a sock puppet who
is capable of speaking for himself.
And this is just hilarious.
*IN*capable Fraudster. hahahahahaha. What a buffoon.
Tell everyone again how your English is "pretty good"...
Jeeze, the white noise around here is deafening.
Yes, so stop creating it Keith!
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around
But being such an *expert* on aircraft you should have been >>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That was >>>>>>>>>> because you didn't know then and just learnt from my posts on >>>>>>>>>> the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned >>>>>>>> so many times now that even *you* could get it, I don't see this >>>>>>>> mental cunt's posts unless someone echoes them like you just
did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>> internal combustion engines, and that made me laugh considering >>>>>>>> that you know jack shit about jack shit :)
today Darren. The Rankine cycle steam engines of old are long
gone, Stirling cycle engines never made the cut, and the only
place you are likely to find an external combustion engines is in >>>>>>> a thermal power station, likely using a steam turbine. Even then, >>>>>>> such power stations are more likely to be IC turbines running on >>>>>>> natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which
replaced the old Ruston diesel alternators of the 70s that I was >>>>>>> familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim >>>>>>> to be the aviation ace around here. Like everything about you,
it's fake.
You didn't correct me, the intent was quite clear, you just wanted >>>>>> to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been
made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
combustionpossessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic who
does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
they
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
Look inside an auto trans one day - all the hydraulic principles in use.
Go to machinery - ditto. Principles are principles no matter what the application.
˙˙Throw in machinery hydraulics and you have just about
every option covered. What's more, some cars have very complex
hydraulic systems - Citroens for example, or Benz ABC hydraulic
suspensions. Of course there are differences in how they all operate
but the hydraulic fundamentals do not change.
Do you want to specify the percentage of mechanics that have come in
contact with the Citroen, or Mercedes suspension systems in Australia.
One of the reasons that the DS series never became popular here is the
lack of places where they could be maintained.
The only similarity is that all hydraulic systems are filled with
incompressible fluid that can be used to transmit force from one place
to another, with a minimum amount of losses.
The only real difference would be the degree
of redundancy employed in aircraft hydraulic systems.
You obviously know nothing about aircraft hydraulics.
You don't seem to know anything about dynamic hydraulics, where the
flow of the working fluid is as important as the pressure. Bet you
can't explain the action of a swashplate motor and why you'd use one
without googling it
High pressure, compact size, smoother flow, variable output. Used them
in earthmoving drive hydraulics. I recall one piece of underground
machinery I used to work on that had a swashplate drive - incredible throttle off braking - throw you through the screen if you tried to
drive it like a car. That piece of equipment could be driven entirely by throttle - and it was the wierdest looking piece of equipment you could imagine. We used to call it the moon buggy.
When a swash plate device is used as a pump, a good example is some
forms of AC compressor. In those you didn't need a cycling (on/off)
clutch, the swash plate cut the output to zero.
combustion"internal combustion engines" in the era quoted, internal
engines had long gone from the airline business.
I merely corrected your misapprehension.
No misapprehension, the meaning was quite clear to anybody other
than a nit picking, point scoring pseudo intellectual.
The only true and correct fact, internal combustion engines never
left the airline business.
Split hairs all you like, but the jet engine is nothing like the
piston engines that it has replaced.
No hair splitting needed or wanted. A jet engine *IS* classified as an *INTERNAL COMBUSTION ENGINE* no matter what you would like it to be. It
has an internal combustion chamber where a working fluid/gas is
evaporated, compressed, ignited and burnt. The expansion of the burning gases acts on a turbine to cause rotation. In this case the rotation of
the turbine is used to power the intake air compressor. Hmmm, that's a
bit like a turbocharger, isn't it? The exhaust thrust is the mode of
power transfer.
The operation of such devices is not complicated, the
underlying principles are not complicated. BTW, the more common
hydraulic pump equivalent in common use in vehicles is the variable vane pump. There's one of these at the front of most step auto trans. https://www.evamo.com/en/products/passenger-car-transmission-pumps/ variable-displacement-pump-vpg
Not always vane, not always variable, but their purpose is to keep the output controllable and the flow smooth.
But his training at RMIT (if it actually ever existed) would haveAfter all, you're the one who tinkers with planes as a *hobby*. You >>>>> share your hobby, I imagine, with people who have a clue about
*engines* in planes.
<snipped the same old shit repeated yet again>
And all the above is something Darren, with his *claimed*
experience in the aviation field, could have said, but he remained
silent, tellingly silent.
His *claimed* experience in the aviation field would not have taken
any nearer to a jet engine than you have been, I.E. not within yahoo.
seen him trained in all forms of propulsion used in planes, even if
only at the theory level. Recall, he claimed he completed all three
years (he didn't know about the 4th year). That alone is very telling.
Not interested in your obsession with noddy.
You reacted, you're interested. HTH.
The error was yours, your posts he reads, or so he says, therefore
he saw your faux pas - and said nothing. The smartarse here was you >>>>> and it blew up in your face.
You are making yourself look even more like a nit picking fool with
every post that you make.
On 16/11/2026 3:56 pm, Xeno wrote:
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around >>>>>>>> today Darren. The Rankine cycle steam engines of old are long >>>>>>>> gone, Stirling cycle engines never made the cut, and the only >>>>>>>> place you are likely to find an external combustion engines is >>>>>>>> in a thermal power station, likely using a steam turbine. Even >>>>>>>> then, such power stations are more likely to be IC turbines
But being such an *expert* on aircraft you should have been >>>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That >>>>>>>>>>> was because you didn't know then and just learnt from my >>>>>>>>>>> posts on the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned >>>>>>>>> so many times now that even *you* could get it, I don't see >>>>>>>>> this mental cunt's posts unless someone echoes them like you >>>>>>>>> just did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>>> internal combustion engines, and that made me laugh considering >>>>>>>>> that you know jack shit about jack shit :)
running on natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which
replaced the old Ruston diesel alternators of the 70s that I was >>>>>>>> familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you
claim to be the aviation ace around here. Like everything about >>>>>>>> you, it's fake.
You didn't correct me, the intent was quite clear, you just
wanted to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been >>>>>> made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
combustionpossessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic
who does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the >>>>>> ˙>> hydraulic systems in aircraft share with those in cars is that >>>>>> they
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
Look inside an auto trans one day - all the hydraulic principles in
use. Go to machinery - ditto. Principles are principles no matter what
the application.
˙˙Throw in machinery hydraulics and you have just about
every option covered. What's more, some cars have very complex
hydraulic systems - Citroens for example, or Benz ABC hydraulic
suspensions. Of course there are differences in how they all operate
but the hydraulic fundamentals do not change.
Do you want to specify the percentage of mechanics that have come in
contact with the Citroen, or Mercedes suspension systems in
Australia. One of the reasons that the DS series never became popular
here is the lack of places where they could be maintained.
The only similarity is that all hydraulic systems are filled with
incompressible fluid that can be used to transmit force from one
place to another, with a minimum amount of losses.
The only real difference would be the degree
of redundancy employed in aircraft hydraulic systems.
You obviously know nothing about aircraft hydraulics.
You don't seem to know anything about dynamic hydraulics, where the
flow of the working fluid is as important as the pressure. Bet you
can't explain the action of a swashplate motor and why you'd use one
without googling it
High pressure, compact size, smoother flow, variable output. Used them
in earthmoving drive hydraulics. I recall one piece of underground
machinery I used to work on that had a swashplate drive - incredible
throttle off braking - throw you through the screen if you tried to
drive it like a car. That piece of equipment could be driven entirely
by throttle - and it was the wierdest looking piece of equipment you
could imagine. We used to call it the moon buggy.
When a swash plate device is used as a pump, a good example is some
forms of AC compressor. In those you didn't need a cycling (on/off)
clutch, the swash plate cut the output to zero.
Well googled that man.
combustion"internal combustion engines" in the era quoted, internal
engines had long gone from the airline business.
I merely corrected your misapprehension.
No misapprehension, the meaning was quite clear to anybody other
than a nit picking, point scoring pseudo intellectual.
The only true and correct fact, internal combustion engines never
left the airline business.
Split hairs all you like, but the jet engine is nothing like the
piston engines that it has replaced.
No hair splitting needed or wanted. A jet engine *IS* classified as an
*INTERNAL COMBUSTION ENGINE* no matter what you would like it to be.
It has an internal combustion chamber where a working fluid/gas is
evaporated, compressed, ignited and burnt. The expansion of the
burning gases acts on a turbine to cause rotation. In this case the
rotation of the turbine is used to power the intake air compressor.
Hmmm, that's a bit like a turbocharger, isn't it? The exhaust thrust
is the mode of power transfer.
Not these days.
The operation of such devices is not complicated, the underlying
principles are not complicated. BTW, the more common hydraulic pump
equivalent in common use in vehicles is the variable vane pump.
There's one of these at the front of most step auto trans.
https://www.evamo.com/en/products/passenger-car-transmission-pumps/
variable-displacement-pump-vpg
Not always vane, not always variable, but their purpose is to keep the
output controllable and the flow smooth.
But his training at RMIT (if it actually ever existed) would haveAfter all, you're the one who tinkers with planes as a *hobby*.
You share your hobby, I imagine, with people who have a clue about >>>>>> *engines* in planes.
<snipped the same old shit repeated yet again>
And all the above is something Darren, with his *claimed*
experience in the aviation field, could have said, but he remained >>>>>> silent, tellingly silent.
His *claimed* experience in the aviation field would not have taken >>>>> any nearer to a jet engine than you have been, I.E. not within yahoo. >>>>>
seen him trained in all forms of propulsion used in planes, even if
only at the theory level. Recall, he claimed he completed all three
years (he didn't know about the 4th year). That alone is very telling.
Not interested in your obsession with noddy.
You reacted, you're interested. HTH.
Not only are you a smartarse, but a boring one at that.
The error was yours, your posts he reads, or so he says, therefore >>>>>> he saw your faux pas - and said nothing. The smartarse here was
you and it blew up in your face.
You are making yourself look even more like a nit picking fool with >>>>> every post that you make.
Keithr0 wrote:
On 13/11/2026 4:00 pm, Clocky wrote:
On 12/11/2026 1:03 pm, Keithr0 wrote:
On 12/11/2026 1:48 pm, Clocky wrote:
On 6/11/2026 1:56 pm, Noddy wrote:Not above telling lies yourself, then claiming it was a joke.
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculously >>>>>>>>> stripped back that Sub to try and fit your argument, and still >>>>>>>>> failed.
Feel free to cite the original comments so we can all look back >>>>>>>> and laugh :)
Must be sad to be him when he has to drag up ancient arguments
just to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other
people have said, hypocrite. Case in point your nonsense above.
You're not only above telling lies you make a habit of it, hypocrite.
In your own words, prove it.
Prove what?
That you're an "habitual" liar? Or just an occassional one?
On 15/11/2026 9:31 pm, alvey wrote:
Keithr0 wrote:
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:˙˙˙ 100%
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "be >>>>>>>>>>> precise".....In a globalised world, anything in any of the major player >>>>>>>>>> countries will
have a knock on effect elsewhere. Only the most naive of
people would say
otherwise, especially in this social media connected planet. >>>>>>>>>> Start with
world parity oil prices and work your way outwards from there. >>>>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't he? >>>>>>>> And you apparently aren't bothered by letting him speak for you :) >>>>>> ~~~~~~~~~~~
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus >>>>>> Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the >>>>>> years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers.
(As now)
like you. most of your posts are just throwing shit. the rest are
suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the
cause of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Nope. Wrong again Retcho.
Neither of the two biggest sneering egomaniacs here, one of whom is
also by far the most abusive, have a mechanics licence. Yep, you and
Fraudster. So your bleat is rubbish.
Try writing that in some known language.
On 16/11/2026 12:52 am, Clocky wrote:
On 15/11/2026 2:45 pm, Keithr0 wrote:
On 15/11/2026 2:46 pm, Clocky wrote:
On 15/11/2026 11:00 am, Axel wrote:
jonz wrote:
On 15-Nov-26 11:05 AM, Clocky wrote:
On 6/11/2026 2:00 pm, Noddy wrote:˙˙˙ 100%
On 6/11/2026 12:11 pm, Axel wrote:
Xeno wrote:
Have a crack at this Felix, and as Trevor would say, "be >>>>>>>>>>> precise".....In a globalised world, anything in any of the major player >>>>>>>>>> countries will
have a knock on effect elsewhere. Only the most naive of
people would say
otherwise, especially in this social media connected planet. >>>>>>>>>> Start with
world parity oil prices and work your way outwards from there. >>>>>>>>>>
well said
Your mental mate loves throwing life savers for you, doesn't he? >>>>>>>> And you apparently aren't bothered by letting him speak for you :) >>>>>> ~~~~~~~~~~~
Until you work out how public newsgroups work - sit down boy.
~~~~~~~~~~~~~~~~
In its heyday usenet was very civilised!. This schemozzle, AKA Aus >>>>>> Cars, is dead but won`t lie down.....Populated (in part) by some
textbook Psychiatric cases!.
˙˙ These, (THIS?) ppl,pull down the general tone of the group.
Surprisingly enough there have been some good discussions over the >>>>>> years, but not anymore sadly.
˙˙ Usually, it only takes a noddy poast to bring out the losers.
(As now)
like you. most of your posts are just throwing shit. the rest are
suck ups to DATE members. oh, sorry. you're one!
The "village idiot" pointing out the symptoms while enabling the
cause of it over decades is pure irony.
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Noddy isn't licensed and neither are you so what are you on about you
silly prick?
Said the guy licenced to sneer at all of humanity.
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around
But being such an *expert* on aircraft you should have been >>>>>>>>> correcting Keith's misapprehensions - but you didn't. That was >>>>>>>>> because you didn't know then and just learnt from my posts on >>>>>>>>> the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned >>>>>>> so many times now that even *you* could get it, I don't see this >>>>>>> mental cunt's posts unless someone echoes them like you just did, >>>>>>> and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were
internal combustion engines, and that made me laugh considering >>>>>>> that you know jack shit about jack shit :)
today Darren. The Rankine cycle steam engines of old are long
gone, Stirling cycle engines never made the cut, and the only
place you are likely to find an external combustion engines is in >>>>>> a thermal power station, likely using a steam turbine. Even then, >>>>>> such power stations are more likely to be IC turbines running on
natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which replaced >>>>>> the old Ruston diesel alternators of the 70s that I was familiar
with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim >>>>>> to be the aviation ace around here. Like everything about you,
it's fake.
You didn't correct me, the intent was quite clear, you just wanted
to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been
made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
possessed fundamental knowledge of hydraulics, internal combustion >>>> ˙>>> engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic who
does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that they >>>> ˙>> are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
On 15/11/2026 8:34 pm, Xeno wrote:
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around
But being such an *expert* on aircraft you should have been >>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That was >>>>>>>>>> because you didn't know then and just learnt from my posts on >>>>>>>>>> the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned >>>>>>>> so many times now that even *you* could get it, I don't see this >>>>>>>> mental cunt's posts unless someone echoes them like you just
did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>> internal combustion engines, and that made me laugh considering >>>>>>>> that you know jack shit about jack shit :)
today Darren. The Rankine cycle steam engines of old are long
gone, Stirling cycle engines never made the cut, and the only
place you are likely to find an external combustion engines is in >>>>>>> a thermal power station, likely using a steam turbine. Even then, >>>>>>> such power stations are more likely to be IC turbines running on >>>>>>> natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which
replaced the old Ruston diesel alternators of the 70s that I was >>>>>>> familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim >>>>>>> to be the aviation ace around here. Like everything about you,
it's fake.
You didn't correct me, the intent was quite clear, you just wanted >>>>>> to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been
made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
combustionpossessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic who
does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
they
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
Only similarity is they both use fluid to create "leverage" or
mechanical advantage, car hydraulics in brakes and clutches are the most basic form of hydraulics.
I spent a lot of time working on industrial construction machinery but
that was in the 1970's, hydraulics or specifically the way they are controlled has changed a lot since then and aircraft systems are on
another lever altogether.
Last week I was asked to have a look at a transmission fault on a Caterpillar D3G bulldozer, the trans is hydrostatic and electronically controlled via joystick so a hell of lot different to anything I've
worked on in the past.
Managed to read a fault code but haven't worked out how to fix it yet.The fault code is (hopefully) telling you where to start. You really
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
He won't be able to do that, as he doesn't even understand the basics of vehicle brake hydraulics, which is why he made is nonsensical comment
about the performance of non power assisted brakes being simulated by removing the vacuum supply on a boosted brake system.
The man is thoroughly *clueless*.
--
--
Regards,
Noddy.
Noddy wrote:
On 16/11/2026 9:23 am, Axel wrote:
Noddy wrote:
On 15/11/2026 2:06 pm, Axel wrote:
only a dickhead like him would think that way. normal ppl would see >>>>> it for what it was, simply agreement.
No, normal people would assume that if a specific person was asked a
question, then that specific person would answer it.
after several decades of posting in public forums you still don't
understand how they work. and you call others stupid
I understand how they work just fine Felix,
Clearly you don't.
but you rolling out this tired old bullshit every time your mouthpiece
acts as your spokesperson doesn't make it right.
This makes even less sense than the usual Fraudster garbling.
Nor does it make you look like anything other than a sock puppet who
is capable of speaking for himself.
And this is just hilarious.
*IN*capable Fraudster. hahahahahaha. What a buffoon.
Tell everyone again how your English is "pretty good"...
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around
But being such an *expert* on aircraft you should have been >>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That was >>>>>>>>>> because you didn't know then and just learnt from my posts on >>>>>>>>>> the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned >>>>>>>> so many times now that even *you* could get it, I don't see this >>>>>>>> mental cunt's posts unless someone echoes them like you just
did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>> internal combustion engines, and that made me laugh considering >>>>>>>> that you know jack shit about jack shit :)
today Darren. The Rankine cycle steam engines of old are long
gone, Stirling cycle engines never made the cut, and the only
place you are likely to find an external combustion engines is in >>>>>>> a thermal power station, likely using a steam turbine. Even then, >>>>>>> such power stations are more likely to be IC turbines running on >>>>>>> natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which
replaced the old Ruston diesel alternators of the 70s that I was >>>>>>> familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you claim >>>>>>> to be the aviation ace around here. Like everything about you,
it's fake.
You didn't correct me, the intent was quite clear, you just wanted >>>>>> to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been
made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
combustionpossessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic who
does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
they
"fundamental knowledge of hydraulics"? The only thing that the
hydraulic systems in aircraft share with those in cars is that
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
Only similarity is they both use fluid to create "leverage" or
mechanical advantage, car hydraulics in brakes and clutches are the most basic form of hydraulics.
I spent a lot of time working on industrial construction machinery but
that was in the 1970's, hydraulics or specifically the way they are controlled has changed a lot since then and aircraft systems are on
another lever altogether.
Last week I was asked to have a look at a transmission fault on a Caterpillar D3G bulldozer, the trans is hydrostatic and electronically controlled via joystick so a hell of lot different to anything I've
worked on in the past.
Managed to read a fault code but haven't worked out how to fix it yet.
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
You obviously know nothing about aircraft hydraulics.
Hardly surprising. He knows nothing about tractor hydraulics either.
Lindsay: "I know nothing about hydraulics except the absolute
basics,like the fill level on my tractor...."
Xeno: "That is not "hydraulics".
Lindsay: " So, if it's not Hydraulics, what in fucks sake operates the
lift and the remotes?"
Xeno: "You didn't mention that."˙ 7/12/14
Why would I need to? If you knew about tractor hydraulics, i wouldnt
need to mention it, shit-fer-brains.
On 16-Nov-26 7:59 PM, Daryl wrote:
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around >>>>>>>> today Darren. The Rankine cycle steam engines of old are long >>>>>>>> gone, Stirling cycle engines never made the cut, and the only >>>>>>>> place you are likely to find an external combustion engines is >>>>>>>> in a thermal power station, likely using a steam turbine. Even >>>>>>>> then, such power stations are more likely to be IC turbines
But being such an *expert* on aircraft you should have been >>>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That >>>>>>>>>>> was because you didn't know then and just learnt from my >>>>>>>>>>> posts on the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been mentioned >>>>>>>>> so many times now that even *you* could get it, I don't see >>>>>>>>> this mental cunt's posts unless someone echoes them like you >>>>>>>>> just did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>>> internal combustion engines, and that made me laugh considering >>>>>>>>> that you know jack shit about jack shit :)
running on natural gas these days. Like these;
https://en.wikipedia.org/wiki/Newman_Power_Station. which
replaced the old Ruston diesel alternators of the 70s that I was >>>>>>>> familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you
claim to be the aviation ace around here. Like everything about >>>>>>>> you, it's fake.
You didn't correct me, the intent was quite clear, you just
wanted to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been >>>>>> made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
alreadyHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics
combustionpossessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic
who does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the >>>>>> ˙>> hydraulic systems in aircraft share with those in cars is that >>>>>> they
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals as
those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that actuate
the control surfaces on an aircraft.
Only similarity is they both use fluid to create "leverage" or
mechanical advantage, car hydraulics in brakes and clutches are the
most basic form of hydraulics.
I spent a lot of time working on industrial construction machinery but
that was in the 1970's, hydraulics or specifically the way they are
controlled has changed a lot since then and aircraft systems are on
another lever altogether.
Last week I was asked to have a look at a transmission fault on a
Caterpillar D3G bulldozer, the trans is hydrostatic and electronically
controlled via joystick so a hell of lot different to anything I've
worked on in the past.
Managed to read a fault code but haven't worked out how to fix it yet.
~~~~~~~~~~~~~~~
˙Did you start with the basics>, first being cycle the key to reset the ECM?..;)
On 17/11/2026 11:03 am, jonz wrote:~~~~~~~~~~~~~~~~
On 16-Nov-26 7:59 PM, Daryl wrote:No but is that a thing:-)
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around >>>>>>>>> today Darren. The Rankine cycle steam engines of old are long >>>>>>>>> gone, Stirling cycle engines never made the cut, and the only >>>>>>>>> place you are likely to find an external combustion engines is >>>>>>>>> in a thermal power station, likely using a steam turbine. Even >>>>>>>>> then, such power stations are more likely to be IC turbines >>>>>>>>> running on natural gas these days. Like these;
But being such an *expert* on aircraft you should have been >>>>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That >>>>>>>>>>>> was because you didn't know then and just learnt from my >>>>>>>>>>>> posts on the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been
mentioned so many times now that even *you* could get it, I >>>>>>>>>> don't see this mental cunt's posts unless someone echoes them >>>>>>>>>> like you just did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>>>> internal combustion engines, and that made me laugh
considering that you know jack shit about jack shit :)
https://en.wikipedia.org/wiki/Newman_Power_Station. which
replaced the old Ruston diesel alternators of the 70s that I >>>>>>>>> was familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you >>>>>>>>> claim to be the aviation ace around here. Like everything about >>>>>>>>> you, it's fake.
You didn't correct me, the intent was quite clear, you just
wanted to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been >>>>>>> made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
combustionHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics >>>>>>> already
possessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic
who does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
that they
"fundamental knowledge of hydraulics"? The only thing that the >>>>>>> ˙>> hydraulic systems in aircraft share with those in cars is
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals
as those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that
actuate the control surfaces on an aircraft.
Only similarity is they both use fluid to create "leverage" or
mechanical advantage, car hydraulics in brakes and clutches are the
most basic form of hydraulics.
I spent a lot of time working on industrial construction machinery
but that was in the 1970's, hydraulics or specifically the way they
are controlled has changed a lot since then and aircraft systems are
on another lever altogether.
Last week I was asked to have a look at a transmission fault on a
Caterpillar D3G bulldozer, the trans is hydrostatic and
electronically controlled via joystick so a hell of lot different to
anything I've worked on in the past.
Managed to read a fault code but haven't worked out how to fix it yet.
~~~~~~~~~~~~~~~
˙˙Did you start with the basics>, first being cycle the key to reset
the ECM?..;)
Fault code is 126 which is differential pressure switch incorrect
reading, each side has its own system and there is a pressure switch in each, if the ecu detects a difference in pressure between the 2 sides it sets a code and reduces drive.
Possibly a blockage somewhere, filters were replaced but that didn't
help, could be a faulty or dirty switch.
The mate who I was helping out works for Boral as a machine operator,
the Cat tech was due at his work sometime this week so he was going to
have a chat with him to see if he had any ideas.
On 17/11/2026 11:03 am, jonz wrote:
On 16-Nov-26 7:59 PM, Daryl wrote:No but is that a thing:-)
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around >>>>>>>>> today Darren. The Rankine cycle steam engines of old are long >>>>>>>>> gone, Stirling cycle engines never made the cut, and the only >>>>>>>>> place you are likely to find an external combustion engines is >>>>>>>>> in a thermal power station, likely using a steam turbine. Even >>>>>>>>> then, such power stations are more likely to be IC turbines >>>>>>>>> running on natural gas these days. Like these;
But being such an *expert* on aircraft you should have been >>>>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That >>>>>>>>>>>> was because you didn't know then and just learnt from my >>>>>>>>>>>> posts on the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been
mentioned so many times now that even *you* could get it, I >>>>>>>>>> don't see this mental cunt's posts unless someone echoes them >>>>>>>>>> like you just did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>>>> internal combustion engines, and that made me laugh
considering that you know jack shit about jack shit :)
https://en.wikipedia.org/wiki/Newman_Power_Station. which
replaced the old Ruston diesel alternators of the 70s that I >>>>>>>>> was familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you >>>>>>>>> claim to be the aviation ace around here. Like everything about >>>>>>>>> you, it's fake.
You didn't correct me, the intent was quite clear, you just
wanted to be a smartarse. Nothing new there, it's what you do.
Not at all. For that matter, it all started with *you* being a
smartarse when I was discussing the AME training offer I had been >>>>>>> made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
combustionHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics >>>>>>> already
possessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car
mechanic who takes short cuts gets a bonus, an aircraft mechanic
who does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
that they
"fundamental knowledge of hydraulics"? The only thing that the >>>>>>> ˙>> hydraulic systems in aircraft share with those in cars is
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals
as those in cars.
Bullshit, explain how the hydraulics used to control the brakes, and
clutch in a car are in any way related to the hydraulics that
actuate the control surfaces on an aircraft.
Only similarity is they both use fluid to create "leverage" or
mechanical advantage, car hydraulics in brakes and clutches are the
most basic form of hydraulics.
I spent a lot of time working on industrial construction machinery
but that was in the 1970's, hydraulics or specifically the way they
are controlled has changed a lot since then and aircraft systems are
on another lever altogether.
Last week I was asked to have a look at a transmission fault on a
Caterpillar D3G bulldozer, the trans is hydrostatic and
electronically controlled via joystick so a hell of lot different to
anything I've worked on in the past.
Managed to read a fault code but haven't worked out how to fix it yet.
~~~~~~~~~~~~~~~
˙˙Did you start with the basics>, first being cycle the key to reset
the ECM?..;)
Fault code is 126 which is differential pressure switch incorrect
reading, each side has its own system and there is a pressure switch in each, if the ecu detects a difference in pressure between the 2 sides it sets a code and reduces drive.
Possibly a blockage somewhere, filters were replaced but that didn't
help, could be a faulty or dirty switch.
The mate who I was helping out works for Boral as a machine operator,
the Cat tech was due at his work sometime this week so he was going to
have a chat with him to see if he had any ideas.
On 17-Nov-26 12:40 PM, Daryl wrote:
On 17/11/2026 11:03 am, jonz wrote:~~~~~~~~~~~~~~~~
On 16-Nov-26 7:59 PM, Daryl wrote:No but is that a thing:-)
On 16/11/2026 2:43 pm, Keithr0 wrote:
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:Not at all. For that matter, it all started with *you* being a >>>>>>>> smartarse when I was discussing the AME training offer I had
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around >>>>>>>>>> today Darren. The Rankine cycle steam engines of old are long >>>>>>>>>> gone, Stirling cycle engines never made the cut, and the only >>>>>>>>>> place you are likely to find an external combustion engines is >>>>>>>>>> in a thermal power station, likely using a steam turbine. Even >>>>>>>>>> then, such power stations are more likely to be IC turbines >>>>>>>>>> running on natural gas these days. Like these;
But being such an *expert* on aircraft you should have been >>>>>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That >>>>>>>>>>>>> was because you didn't know then and just learnt from my >>>>>>>>>>>>> posts on the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been
mentioned so many times now that even *you* could get it, I >>>>>>>>>>> don't see this mental cunt's posts unless someone echoes them >>>>>>>>>>> like you just did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>>>>> internal combustion engines, and that made me laugh
considering that you know jack shit about jack shit :)
https://en.wikipedia.org/wiki/Newman_Power_Station. which >>>>>>>>>> replaced the old Ruston diesel alternators of the 70s that I >>>>>>>>>> was familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you >>>>>>>>>> claim to be the aviation ace around here. Like everything >>>>>>>>>> about you, it's fake.
You didn't correct me, the intent was quite clear, you just >>>>>>>>> wanted to be a smartarse. Nothing new there, it's what you do. >>>>>>>>
been made and rejected. It is excerpted below
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
combustionHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics >>>>>>>> already
possessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car
mechanic, for one thing, according to both you and clocky, a car >>>>>>> mechanic who takes short cuts gets a bonus, an aircraft mechanic >>>>>>> who does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following.
"fundamental knowledge of hydraulics"? The only thing that the >>>>>>>> ˙>> hydraulic systems in aircraft share with those in cars is >>>>>>>> that they
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals >>>>>> as those in cars.
Bullshit, explain how the hydraulics used to control the brakes,
and clutch in a car are in any way related to the hydraulics that
actuate the control surfaces on an aircraft.
Only similarity is they both use fluid to create "leverage" or
mechanical advantage, car hydraulics in brakes and clutches are the
most basic form of hydraulics.
I spent a lot of time working on industrial construction machinery
but that was in the 1970's, hydraulics or specifically the way they
are controlled has changed a lot since then and aircraft systems are
on another lever altogether.
Last week I was asked to have a look at a transmission fault on a
Caterpillar D3G bulldozer, the trans is hydrostatic and
electronically controlled via joystick so a hell of lot different to
anything I've worked on in the past.
Managed to read a fault code but haven't worked out how to fix it yet.
~~~~~~~~~~~~~~~
˙˙Did you start with the basics>, first being cycle the key to reset
the ECM?..;)
Sure is.
126-03 or 126-00?
Remember Les' engine and the adage, a little knowledge is a dangerous
thing.
On 17/11/2026 12:58 pm, jonz wrote:
On 17-Nov-26 12:40 PM, Daryl wrote:
On 17/11/2026 11:03 am, jonz wrote:~~~~~~~~~~~~~~~~
On 16-Nov-26 7:59 PM, Daryl wrote:No but is that a thing:-)
On 16/11/2026 2:43 pm, Keithr0 wrote:~~~~~~~~~~~~~~~
On 15/11/2026 8:34 pm, Xeno wrote:
On 15/11/2026 6:01 pm, Keithr0 wrote:
On 14/11/2026 11:49 pm, Xeno wrote:
On 14/11/2026 5:54 pm, Keithr0 wrote:
On 13/11/2026 11:34 am, Xeno wrote:Not at all. For that matter, it all started with *you* being a >>>>>>>>> smartarse when I was discussing the AME training offer I had >>>>>>>>> been made and rejected. It is excerpted below
On 13/11/2026 7:04 am, Noddy wrote:
On 13/11/2026 6:20 am, Axel wrote:There aren't many forms of external combustion engines around >>>>>>>>>>> today Darren. The Rankine cycle steam engines of old are long >>>>>>>>>>> gone, Stirling cycle engines never made the cut, and the only >>>>>>>>>>> place you are likely to find an external combustion engines is >>>>>>>>>>> in a thermal power station, likely using a steam turbine. Even >>>>>>>>>>> then, such power stations are more likely to be IC turbines >>>>>>>>>>> running on natural gas these days. Like these;
But being such an *expert* on aircraft you should have been >>>>>>>>>>>>>> correcting Keith's misapprehensions - but you didn't. That >>>>>>>>>>>>>> was because you didn't know then and just learnt from my >>>>>>>>>>>>>> posts on the topic
I agree
Of course you do :)
Hate to burst your bubble here Felix, but as has been >>>>>>>>>>>> mentioned so many times now that even *you* could get it, I >>>>>>>>>>>> don't see this mental cunt's posts unless someone echoes them >>>>>>>>>>>> like you just did, and I wasn't following the thread.
All I saw was you comment about knowing that jet engines were >>>>>>>>>>>> internal combustion engines, and that made me laugh
considering that you know jack shit about jack shit :)
https://en.wikipedia.org/wiki/Newman_Power_Station. which >>>>>>>>>>> replaced the old Ruston diesel alternators of the 70s that I >>>>>>>>>>> was familiar with.
Completely irrelevant to anything being discussed.
You saw Keith's post, you failed to correct him, though you >>>>>>>>>>> claim to be the aviation ace around here. Like everything >>>>>>>>>>> about you, it's fake.
You didn't correct me, the intent was quite clear, you just >>>>>>>>>> wanted to be a smartarse. Nothing new there, it's what you do. >>>>>>>>>
Re: Paris riots
23/10/2026, 5:43 pm
Date:Fri, 23 Oct 2026 17:43:49 +1100
combustionHow the 1980s Transition Program Worked:
? The "Structures" & "Mechanical" Pathways: Motor mechanics >>>>>>>>> already
possessed fundamental knowledge of hydraulics, internal
engines,
The job of an aircraft mechanic is nothing like that of a car >>>>>>>> mechanic, for one thing, according to both you and clocky, a car >>>>>>>> mechanic who takes short cuts gets a bonus, an aircraft mechanic >>>>>>>> who does so makes a quick exit propelled by a boot.
You wrote, in an attempt to hang shit on me, the following. >>>>>>>>>>>
"fundamental knowledge of hydraulics"? The only thing that the >>>>>>>>>>> hydraulic systems in aircraft share with those in cars is >>>>>>>>> that they
are both filled with oil.
Explain what is wrong with that statement.
Aircraft hydraulics share exactly the same hydraulic fundamentals >>>>>>> as those in cars.
Bullshit, explain how the hydraulics used to control the brakes,
and clutch in a car are in any way related to the hydraulics that >>>>>> actuate the control surfaces on an aircraft.
Only similarity is they both use fluid to create "leverage" or
mechanical advantage, car hydraulics in brakes and clutches are the >>>>> most basic form of hydraulics.
I spent a lot of time working on industrial construction machinery
but that was in the 1970's, hydraulics or specifically the way they >>>>> are controlled has changed a lot since then and aircraft systems are >>>>> on another lever altogether.
Last week I was asked to have a look at a transmission fault on a
Caterpillar D3G bulldozer, the trans is hydrostatic and
electronically controlled via joystick so a hell of lot different to >>>>> anything I've worked on in the past.
Managed to read a fault code but haven't worked out how to fix it yet. >>>>
˙˙Did you start with the basics>, first being cycle the key to reset
the ECM?..;)
Sure is.
126-03 or 126-00?
As far as I could tell its just code 126 repeating.
On 17/11/2026 3:07 pm, Xeno wrote:
Remember Les' engine and the adage, a little knowledge is a dangerous
thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there, shit-fer-brains.
On 17/11/2026 5:19 pm, lindsay wrote:Way more of an idea than you Daryl old chap! Way more! I even gave you a logical step by step process through the failure mode it suffered.
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he has
Remember Les' engine and the adage, a little knowledge is a dangerous
thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
zero idea what he's talking about.
On 17/11/2026 3:07 pm, Xeno wrote:
Remember Les' engine and the adage, a little knowledge is a dangerous
thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there, shit-fer-brains.
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he has
Remember Les' engine and the adage, a little knowledge is a dangerous
thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
zero idea what he's talking about.
On 17/11/2026 8:05 pm, Daryl wrote:You put your insecurity complex on public display Darren.
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he has
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
zero idea what he's talking about.
Zero is being generous. Far less than zero in my opinion, but then he's
not happy unless he's making himself look completely clueless.
You can just imagine the stupid cunt as a "teacher", huh? The kids must
have been pissing themselves every time he opened his trap and started waffling on :)
On 16/11/2026 12:52 am, Clocky wrote:
On 15/11/2026 2:45 pm, Keithr0 wrote:
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Noddy isn't licensed and neither are you so what are you on about you
silly prick?
That's right. Fortunately I live in a state where you don't have to demonstrate a complete lack of understanding about something as basic as windscreen glass to get a "speshul ticket".
On 16/11/2026 5:01 am, Noddy wrote:
On 16/11/2026 12:52 am, Clocky wrote:
On 15/11/2026 2:45 pm, Keithr0 wrote:
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Noddy isn't licensed and neither are you so what are you on about you
silly prick?
That's right. Fortunately I live in a state where you don't have to
demonstrate a complete lack of understanding about something as basic
as windscreen glass to get a "speshul ticket".
The only state "All Imperial" Jeeps exist and the balls in CV joints are what straightens the wheels on FWD cars...
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
On 16/11/2026 5:01 am, Noddy wrote:
That's right. Fortunately I live in a state where you don't have to
demonstrate a complete lack of understanding about something as basic
as windscreen glass to get a "speshul ticket".
The only state "All Imperial" Jeeps exist and the balls in CV joints are what straightens the wheels on FWD cars...
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
On 17/11/2026 9:07 pm, Clocky wrote:
On 16/11/2026 5:01 am, Noddy wrote:
That's right. Fortunately I live in a state where you don't have to
demonstrate a complete lack of understanding about something as basic
as windscreen glass to get a "speshul ticket".
The only state "All Imperial" Jeeps exist and the balls in CV joints
are what straightens the wheels on FWD cars...
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
Claims the fucktard who imagines he repaired enough ecu's to pay off a
house in 6 years :)
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he has
Remember Les' engine and the adage, a little knowledge is a dangerous
thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
zero idea what he's talking about.
On 16/11/2026 5:01 am, Noddy wrote:
On 16/11/2026 12:52 am, Clocky wrote:
On 15/11/2026 2:45 pm, Keithr0 wrote:
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Noddy isn't licensed and neither are you so what are you on about you
silly prick?
That's right. Fortunately I live in a state where you don't have to
demonstrate a complete lack of understanding about something as basic
as windscreen glass to get a "speshul ticket".
The only state "All Imperial" Jeeps exist and the balls in CV joints are what straightens the wheels on FWD cars...~~~~~~~~~~~~~
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
On 17-Nov-26 9:07 PM, Clocky wrote:
~~~~~~~~~~~~~
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
˙Qualified?, you?, c'mon wally (the plastic`s on the *outside*) give it up!. ???>
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he has
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis' argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
On 18/11/2026 11:10 am, jonz wrote:Yep, have trade qualifications, get the licence.
On 17-Nov-26 9:07 PM, Clocky wrote:
~~~~~~~~~~~~~
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
˙˙Qualified?, you?, c'mon wally (the plastic`s on the *outside*) give
it up!. ???>
The "licensing" standards in WA must be pretty easy :)
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he has
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
On 17/11/2026 9:07 pm, Clocky wrote:
On 16/11/2026 5:01 am, Noddy wrote:
On 16/11/2026 12:52 am, Clocky wrote:
On 15/11/2026 2:45 pm, Keithr0 wrote:
A superiority complex only second to xeno. Apparently having a
mechanic's licence gives the right to look down on everybody else.
Noddy isn't licensed and neither are you so what are you on about
you silly prick?
That's right. Fortunately I live in a state where you don't have to
demonstrate a complete lack of understanding about something as basic
as windscreen glass to get a "speshul ticket".
The only state "All Imperial" Jeeps exist and the balls in CV joints
are what straightens the wheels on FWD cars...
Don't forget, he has no clue on valve dynamics and, worse, thinks that little tang on bearing shells is what prevents the shell from rotating.
He has no clue on bearing crush - yet he claims to be a trained and qualified auto machinist. FFS, even us boring old motor mechanics know
this *basic stuff*.
Well, he'd get plenty of *experience* at it in his shed. Gets very dusty
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
up there on the mesa and downwind of the quarry.
On 17/11/2026 9:07 pm, Clocky wrote:
On 16/11/2026 5:01 am, Noddy wrote:
That's right. Fortunately I live in a state where you don't have to
demonstrate a complete lack of understanding about something as basic
as windscreen glass to get a "speshul ticket".
The only state "All Imperial" Jeeps exist and the balls in CV joints
are what straightens the wheels on FWD cars...
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
Claims the fucktard who imagines he repaired enough ecu's to pay off a
house in 6 years :)
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:
Remember Les' engine and the adage, a little knowledge is a dangerous
thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
He's pretty good for someone who has had no hands on connection for 30
years :)
On 17/11/2026 9:07 pm, Clocky wrote:
On 16/11/2026 5:01 am, Noddy wrote:
That's right. Fortunately I live in a state where you don't have to
demonstrate a complete lack of understanding about something as basic
as windscreen glass to get a "speshul ticket".
The only state "All Imperial" Jeeps exist and the balls in CV joints
are what straightens the wheels on FWD cars...
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
Claims the fucktard who imagines he repaired enough ecu's to pay off a
house in 6 years :)
Noddy wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
He's pretty good for someone who has had no hands on connection for 30
years :)
And what exactly is your "hands on connection" Fraudster? Some specifics please.
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he has
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
On 18-Nov-26 12:08 PM, Axel wrote:
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he has
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right there,
shit-fer-brains.
zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
On 18/11/2026 10:58 am, alvey wrote:
Noddy wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
He's pretty good for someone who has had no hands on connection for
30 years :)
And what exactly is your "hands on connection" Fraudster? Some
specifics please.
[crickets]
His only hands on connection are both hands on his slug.
On 18-Nov-26 12:08 PM, Axel wrote:
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been anywhere near that engine, he has no fucking idea on the subject but because of his
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
OCD he can't help himself from having a go at Noddy.
I worked on that car and engine a lot more than Noddy did and its so
long and many broken cars/engines/gearboxes and diffs ago I can't even remember the details.
Race cars/engines etc break on a regular basis, if they don't you aren't driving hard enough, if you can't afford to fix the damage don't race,
end of story.
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been anywhere near that engine, he has no fucking idea on the subject but because of his
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
OCD he can't help himself from having a go at Noddy.
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix? So far there's been 8 explanations as to the cause
of the failure, and *none* of them have had anything to do with me
despite all the ridiculous fucking noise he's made on the subject :)No noise, that's *your forte*. I used logic.
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the
ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
On 18/11/2026 3:21 pm, jonz wrote:
No need to prove or disprove anything, Xeno has never been anywhere near that engine, he has no fucking idea on the subject but because of hisyou need to prove that what Xeno said is wrong~~~~~~~~~~
Ya think so? Sorry to disappoint you.
OCD he can't help himself from having a go at Noddy.
I worked on that car and engine a lot more than Noddy did and its so
long and many broken cars/engines/gearboxes and diffs ago I can't even remember the details.
Race cars/engines etc break on a regular basis, if they don't you aren't driving hard enough, if you can't afford to fix the damage don't race,
end of story.
On 18/11/2026 6:28 pm, Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
No need to prove or disprove anything, Xeno has never been anywhereyou need to prove that what Xeno said is wrong~~~~~~~~~~
Ya think so? Sorry to disappoint you.
near that engine, he has no fucking idea on the subject but because of
his OCD he can't help himself from having a go at Noddy.
I worked on that car and engine a lot more than Noddy did and its so
long and many broken cars/engines/gearboxes and diffs ago I can't even
remember the details.
Race cars/engines etc break on a regular basis, if they don't you
aren't driving hard enough, if you can't afford to fix the damage
don't race, end of story.
That's it in a nutshell.
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix? So far there's been 8 explanations as to the cause
of the failure, and *none* of them have had anything to do with me
despite all the ridiculous fucking noise he's made on the subject :)
On 18/11/2026 6:30 pm, Noddy wrote:
Which version Felix? So far there's been 8 explanations as to theI was just scrolling through Prime looking for something to watch and
cause of the failure, and *none* of them have had anything to do with
me despite all the ridiculous fucking noise he's made on the subject :)
found a movie called Xeno, something about a "terrifying, insectoid/ biological alien machine designed to kill", could it be about someone we know?
On 18/11/2026 10:12 pm, Daryl wrote:
On 18/11/2026 6:30 pm, Noddy wrote:
Which version Felix? So far there's been 8 explanations as to theI was just scrolling through Prime looking for something to watch and
cause of the failure, and *none* of them have had anything to do with
me despite all the ridiculous fucking noise he's made on the subject :)
found a movie called Xeno, something about a "terrifying, insectoid/
biological alien machine designed to kill", could it be about someone
we know?
If it drowns it's victims in bullshit, then it has to be him :)
On 18/11/2026 11:10 am, jonz wrote:
On 17-Nov-26 9:07 PM, Clocky wrote:
~~~~~~~~~~~~~
Get the fuck out of here you incompetent dickhead, you're not even
qualified to push a broom.
˙˙Qualified?, you?, c'mon wally (the plastic`s on the *outside*) give
it up!. ???>
The "licensing" standards in WA must be pretty easy :)
On 18/11/2026 6:30 pm, Noddy wrote:~~~~~~~~~~~~~
On 18/11/2026 12:08 pm, Axel wrote:I was just scrolling through Prime looking for something to watch and
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix? So far there's been 8 explanations as to the
cause of the failure, and *none* of them have had anything to do with
me despite all the ridiculous fucking noise he's made on the subject :)
found a movie called Xeno, something about a "terrifying, insectoid/ biological alien machine designed to kill", could it be about someone we know?
On 18/11/2026 6:30 pm, Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:I was just scrolling through Prime looking for something to watch and
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix? So far there's been 8 explanations as to the
cause of the failure, and *none* of them have had anything to do with
me despite all the ridiculous fucking noise he's made on the subject :)
found a movie called Xeno, something about a "terrifying, insectoid/ biological alien machine designed to kill", could it be about someone we know?
I was just scrolling through Prime looking for something to watch and
found a movie called Xeno, something about a "terrifying, insectoid/biological alien machine designed to kill", could it be about someone we know?
I was just scrolling through Prime looking for something to watch andI doubt it. The very name "Xeno" means *foreign* or *alien*.
found a movie called Xeno, something about a "terrifying, insectoid/
biological alien machine designed to kill", could it be about someone
we know?
But I've successfully killed off Darren's bullshit.˙ ;-)
On 18/11/2026 10:12 pm, Daryl wrote:
I was just scrolling through Prime looking for something to watch and
found a movie called Xeno, something about a "terrifying, insectoid/
biological alien machine designed to kill", could it be about someone
we know?
whats it do? Bore you to death?
Sorry to disappoint you Keith, I'm a mechanic,
hydraulics and internal combustion engines, it's what we do.
arm hydraulics in the late 60s. Then in AC compressors, later, in a
of the theme, adjustable vane pumps in auto trans.
The only true and correct fact, internal combustion engines never
left the airline business.
Split hairs all you like, but the jet engine is nothing like the
piston engines that it has replaced.
No hair splitting needed or wanted. A jet engine *IS* classified as
an *INTERNAL COMBUSTION ENGINE* no matter what you would like it to
be. It has an internal combustion chamber where a working fluid/gas
is evaporated, compressed, ignited and burnt. The expansion of the
burning gases acts on a turbine to cause rotation. In this case the
rotation of the turbine is used to power the intake air compressor.
Hmmm, that's a bit like a turbocharger, isn't it? The exhaust thrust
is the mode of power transfer.
Not these days.
Odd, I was under the impression that a jet propels itself forward
through a *reaction* to the exhaust thrust.
Interesting? ROTFL!You reacted, you're interested. HTH.
Not only are you a smartarse, but a boring one at that.
You reacted, you found me interesting enough to respond. HTH.
Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been anywhere
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he >>>>>> has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) Who >>>>> can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
near that engine, he has no fucking idea on the subject but because of
his OCD he can't help himself from having a go at Noddy.
And your little mate, he of the variable height, *always* knowss what
he's talking about hey Deryl...
jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
so your opinion is worthless then
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and krypsis'
argument is dead in the water!!. (Was never otherwise) Who can prove
my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the
ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been for
a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
˙My first experience with the swash plate concept would have been inf
arm hydraulics in the late 60s. Then in AC compressors, later, in a
AC compressors are an example of hydraulics?
of the theme, adjustable vane pumps in auto trans.
Absolutely nothing like aircraft hydraulics.
The only true and correct fact, internal combustion engines never >>>>>> left the airline business.
Split hairs all you like, but the jet engine is nothing like the
piston engines that it has replaced.
No hair splitting needed or wanted. A jet engine *IS* classified as
an *INTERNAL COMBUSTION ENGINE* no matter what you would like it to
be. It has an internal combustion chamber where a working fluid/gas
is evaporated, compressed, ignited and burnt. The expansion of the
burning gases acts on a turbine to cause rotation. In this case the
rotation of the turbine is used to power the intake air compressor.
Hmmm, that's a bit like a turbocharger, isn't it? The exhaust thrust
is the mode of power transfer.
Not these days.
Odd, I was under the impression that a jet propels itself forward
through a *reaction* to the exhaust thrust.
Nope on modern large jets, the trust from the tailpipe is a minor part
of the total.
Interesting? ROTFL!You reacted, you're interested. HTH.
Not only are you a smartarse, but a boring one at that.
You reacted, you found me interesting enough to respond. HTH.
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been for
a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he >>>>>> has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) Who >>>>> can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the
ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he >>>>>> has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) Who >>>>> can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
True for most car mechanics unless we are talking about the most basic
like brake and clutch or auto transmissions.
For me servicing Perkins diesels and repairing industrial construction machinery hydraulics was what I did the most.
On 19/11/2026 9:44 pm, Keithr0 wrote:Where the valve broke is the only clue you need to get you started. The
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he >>>>>>> has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise)
Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
LOL, one of them must have broke into Les's garage, stolen the parts and taken them to a metallurgical laboratory and had them tested:-)
The only thing that anyone can conclude from those photos is that a
valve broke and damaged the head, no way do those photos give any indications as to why, plucking random statements out of his arse such
as "overheating of the valve stem causing it to break" is utter bullshit.
As the person who dismantled the engine after the failure I didn't find
any immediately obvious reasons for the failure and certainly no sign of overheated valve stems, fucked if I know how this cunt dreams up this
shit, its just pure fantasy.
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he >>>>>> has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise)
Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the
ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
On 18/11/2026 7:17 pm, alvey wrote:
Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been anywhere
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to,
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>> there, shit-fer-brains.
he has zero idea what he's talking about.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise)
Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
near that engine, he has no fucking idea on the subject but because
of his OCD he can't help himself from having a go at Noddy.
And your little mate, he of the variable height, *always* knowss what
he's talking about hey Deryl...
Little Mr Knownothing sticks his oar in.
On 18/11/2026 6:44 pm, Axel wrote:
jonz wrote:Probably worth more than yours.
On 18-Nov-26 12:08 PM, Axel wrote:
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he >>>>>> has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a
dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise)
Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
so your opinion is worthless then
On 19/11/2026 9:44 pm, Keithr0 wrote:
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
LOL, one of them must have broke into Les's garage, stolen the parts and taken them to a metallurgical laboratory and had them tested:-)
The only thing that anyone can conclude from those photos is that a
valve broke and damaged the head, no way do those photos give any indications as to why, plucking random statements out of his arse such
as "overheating of the valve stem causing it to break" is utter bullshit.
As the person who dismantled the engine after the failure I didn't find
any immediately obvious reasons for the failure and certainly no sign of overheated valve stems, fucked if I know how this cunt dreams up this
shit, its just pure fantasy.
Keithr0 wrote:
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
I'm just stating the reason Xeno gave, viz.
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been for
a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
˙My first experience with the swash plate concept would have been inf
arm hydraulics in the late 60s. Then in AC compressors, later, in a
AC compressors are an example of hydraulics?
of the theme, adjustable vane pumps in auto trans.
Absolutely nothing like aircraft hydraulics.
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
True for most car mechanics unless we are talking about the most basic
like brake and clutch or auto transmissions.
For me servicing Perkins diesels and repairing industrial construction machinery hydraulics was what I did the most.
Keithr0 wrote:
so your opinion is worthless thenProbably worth more than yours.
jonsey's opinion was unsupported. I commented on that. your remark is worthless.
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do not understand, and cannot tell if they're valid or not.
On 20/11/2026 12:13 am, Axel wrote:
Keithr0 wrote:
so your opinion is worthless thenProbably worth more than yours.
jonsey's opinion was unsupported. I commented on that. your remark is
worthless.
Not as much as yours, Felix. Keith has _some_ experience with
aircraft. You have none. Neither does your mental mate :)
Noddy wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
I'm just stating the reason Xeno gave, viz.overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so. >>>
<bullshit flushed>
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
Noddy wrote:
On 20/11/2026 12:13 am, Axel wrote:
Keithr0 wrote:
so your opinion is worthless thenProbably worth more than yours.
jonsey's opinion was unsupported. I commented on that. your remark is
worthless.
Not as much as yours, Felix. Keith has _some_ experience with
aircraft. You have none. Neither does your mental mate :)
jonesy's comment was about Les's engine, not aircraft, which would be obvious if you hadn't snipped the context
On 20/11/2026 8:19 am, Axel wrote:
Noddy wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't
do one, you're not qualified to comment on cars, your leader xeno
says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that you
look totally clueless by echoing something that you do not understand
as if it's factual when you have no idea as to it's veracity.
Noddy wrote:
On 20/11/2026 8:19 am, Axel wrote:
Noddy wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
overheating of the valve stem causing it to break is consistent >>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't >>>>>> do one, you're not qualified to comment on cars, your leader xeno >>>>>> says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that you
look totally clueless by echoing something that you do not understand
as if it's factual when you have no idea as to it's veracity.
thinking you can read minds, makes you the dickhead
On 20/11/2026 8:23 am, Axel wrote:
Noddy wrote:
On 20/11/2026 12:13 am, Axel wrote:
Keithr0 wrote:
so your opinion is worthless thenProbably worth more than yours.
jonsey's opinion was unsupported. I commented on that. your remark
is worthless.
Not as much as yours, Felix. Keith has _some_ experience with
aircraft. You have none. Neither does your mental mate :)
jonesy's comment was about Les's engine, not aircraft, which would be
obvious if you hadn't snipped the context
You were replying to Keith, who made no comment about Les's engine :)
On 18/11/2026 6:44 pm, Axel wrote:there, shit-fer-brains.
jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:
Remember Les' engine and the adage, a little knowledge is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right
he has zero idea what he's talking about.Especially when it comes to the engine he keeps going back to,
krypsis' argument is dead in the water!!. (Was never otherwise) Who can~~~~~~~~~~~~~~~~~~~~
Yes indeed, Ive followed this debacle˙ from the get-go, and
Probably worth more than yours.~~~~~~~~~~
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
so your opinion is worthless then
Axel wrote:
Noddy wrote:
On 20/11/2026 8:19 am, Axel wrote:
Noddy wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
overheating of the valve stem causing it to break is consistent >>>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't >>>>>>> do one, you're not qualified to comment on cars, your leader xeno >>>>>>> says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that you
look totally clueless by echoing something that you do not understand
as if it's factual when you have no idea as to it's veracity.
thinking you can read minds, makes you the dickhead
Noddy wrote:
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that you
look totally clueless by echoing something that you do not understand
as if it's factual when you have no idea as to it's veracity.
thinking you can read minds, makes you the dickhead
On 20-Nov-26 11:02 AM, Axel wrote:
thinking you can read minds, makes you the dickhead
~~~~~~~~~~~~~~~~~~
Sent *twice* two min. apart!. Is that *to be sure, to be sure*....OR is
that is the extent of yer memory span??. The latter for me!!.??????>>
On 20/11/2026 11:00 am, Axel wrote:
Noddy wrote:
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that you
look totally clueless by echoing something that you do not understand
as if it's factual when you have no idea as to it's veracity.
thinking you can read minds, makes you the dickhead
You're a fucking idiot Felix.
There is absolutely zero need for you to ever echo the comments of
anyone who has ever posted them here, and as much as you like to be your mental mate's squirming little cheerleader you have no fucking idea at
*all* if any comment he ever makes of a technical nature is accurate
which makes you reposting it as if it's some form of valid argument look extremely stupid.
Really, if you had a clue at all you would just be quiet.....
On 20/11/2026 8:51 am, Noddy wrote:
On 20/11/2026 11:00 am, Axel wrote:
Noddy wrote:
You have no business "stating reasons" that you personally do not >>>>>> understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that
you look totally clueless by echoing something that you do not
understand as if it's factual when you have no idea as to it's
veracity.
thinking you can read minds, makes you the dickhead
You're a fucking idiot Felix.
There is absolutely zero need for you to ever echo the comments of
anyone who has ever posted them here, and as much as you like to be
your mental mate's squirming little cheerleader you have no fucking
idea at *all* if any comment he ever makes of a technical nature is
accurate which makes you reposting it as if it's some form of valid
argument look extremely stupid.
Hate to be the one to break it to you Mr. "All Imperial" Jeep, but
*you* have no clue at all if any comments of a technical nature are
true either, you have proved that time and time you grossly
incompetent Dunning-Kruger poster child.
At least Felix doesn't falsely claim to be a qualified mechanic!
Really, if you had a clue at all you would just be quiet.....
Advice you should take yourself, dumbarse. If only you knew how stupid
you actually look to qualified and trade experienced mechanics.
On 20/11/2026 12:13 am, Axel wrote:Darren, *YOU* have no experience with aircraft engines. You didn't
Keithr0 wrote:
so your opinion is worthless thenProbably worth more than yours.
jonsey's opinion was unsupported. I commented on that. your remark is
worthless.
Not as much as yours, Felix. Keith has _some_ experience with aircraft.
You have none. Neither does your mental mate :)
On 20/11/2026 8:19 am, Axel wrote:
Noddy wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't
do one, you're not qualified to comment on cars, your leader xeno
says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that you
look totally clueless by echoing something that you do not understand as
if it's factual when you have no idea as to it's veracity.
Something you do with alarming regularity.
alvey wrote:
Keithr0 wrote:
On 13/11/2026 4:00 pm, Clocky wrote:
On 12/11/2026 1:03 pm, Keithr0 wrote:
On 12/11/2026 1:48 pm, Clocky wrote:
On 6/11/2026 1:56 pm, Noddy wrote:Not above telling lies yourself, then claiming it was a joke.
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculously >>>>>>>>>> stripped back that Sub to try and fit your argument, and still >>>>>>>>>> failed.
Feel free to cite the original comments so we can all look back >>>>>>>>> and laugh :)
Must be sad to be him when he has to drag up ancient arguments >>>>>>>> just to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what other >>>>>> people have said, hypocrite. Case in point your nonsense above.
You're not only above telling lies you make a habit of it, hypocrite.
In your own words, prove it.
Prove what?
That you're an "habitual" liar? Or just an occassional one?
What? Not even a worn cliche in response Retcho?
On 20/11/2026 11:00 am, Axel wrote:
Noddy wrote:
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that you
look totally clueless by echoing something that you do not understand
as if it's factual when you have no idea as to it's veracity.
thinking you can read minds, makes you the dickhead
You're a fucking idiot Felix.
There is absolutely zero need for you to ever echo the comments of
anyone who has ever posted them here, and as much as you like to be your mental mate's squirming little cheerleader you have no fucking idea at
*all* if any comment he ever makes of a technical nature is accurate
which makes you reposting it as if it's some form of valid argument look extremely stupid.
Really, if you had a clue at all you would just be quiet.....
Clocky wrote:
On 20/11/2026 8:51 am, Noddy wrote:
On 20/11/2026 11:00 am, Axel wrote:
Noddy wrote:
You have no business "stating reasons" that you personally do not >>>>>>> understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that
you look totally clueless by echoing something that you do not
understand as if it's factual when you have no idea as to it's
veracity.
thinking you can read minds, makes you the dickhead
You're a fucking idiot Felix.
There is absolutely zero need for you to ever echo the comments of
anyone who has ever posted them here, and as much as you like to be
your mental mate's squirming little cheerleader you have no fucking
idea at *all* if any comment he ever makes of a technical nature is
accurate which makes you reposting it as if it's some form of valid
argument look extremely stupid.
Hate to be the one to break it to you Mr. "All Imperial" Jeep, but
*you* have no clue at all if any comments of a technical nature are
true either, you have proved that time and time you grossly
incompetent Dunning-Kruger poster child.
At least Felix doesn't falsely claim to be a qualified mechanic!
but I understood everything Xeno wrote anyway. so noddy was wrong, again
Really, if you had a clue at all you would just be quiet.....
Advice you should take yourself, dumbarse. If only you knew how stupid
you actually look to qualified and trade experienced mechanics.
On 19/11/2026 10:24 pm, Daryl wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
True for most car mechanics unless we are talking about the most basic
like brake and clutch or auto transmissions.
There's not much in the way of hydraulics in automatic transmissions
that the average mechanic ever comes into contact with. Most workshops
are limited to fluid and filter changes, and the only people who would
ever see the inside of an auto trans would be a rebuilder.
For me servicing Perkins diesels and repairing industrial construction
machinery hydraulics was what I did the most.
A tractor or Forklift mechanic would see more hydraulic work in a month
than the average car mechanic would see in a lifetime :)
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
By his own admission, a generation :)
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
A very minor part.
˙˙My first experience with the swash plate concept would have been inf
arm hydraulics in the late 60s. Then in AC compressors, later, in a
AC compressors are an example of hydraulics?
Only in his deluded world :)
of the theme, adjustable vane pumps in auto trans.
Absolutely nothing like aircraft hydraulics.
Not even close, but then that's never been important to him. He just
waffles on incessantly knowing that Felix will lap it all up.
On 20/11/2026 12:03 am, Axel wrote:Just because *you* don't understand Darren, doesn't mean all others are
Keithr0 wrote:
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do not understand, and cannot tell if they're valid or not.
On 19/11/2026 10:37 pm, Daryl wrote:
On 19/11/2026 9:44 pm, Keithr0 wrote:
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
LOL, one of them must have broke into Les's garage, stolen the parts
and taken them to a metallurgical laboratory and had them tested:-)
Lol :)
The only thing that anyone can conclude from those photos is that a
valve broke and damaged the head, no way do those photos give any
indications as to why, plucking random statements out of his arse such
as "overheating of the valve stem causing it to break" is utter bullshit.
As is every "theory" he's come up with to date.
As the person who dismantled the engine after the failure I didn't
find any immediately obvious reasons for the failure and certainly no
sign of overheated valve stems, fucked if I know how this cunt dreams
up this shit, its just pure fantasy.
He has no fucking idea, that much is a given.
The only thing that is obvious from the pic is that the valve came into contact with the piston while the valve was sticking a *long* way out of it's guide, and there are a few possible explanations for that.
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
Any one of those are plausible explanations for such a failure. What are *not* plausible explanations are things like "valve loft" (whatever the
fuck that is :), Insufficient piston to valve clearance, incorrect valve timing, or any other nonsensical theory that would fail to explain a
random single valve failure on a 20 valve engine.
The fact of the matter here is that despite all the continual noise this mental cunt of a thing makes, the *only* thing he has ever managed to demonstrate is that when it comes to engines of this nature he has absolutely no idea what he's talking about.You have more than adequately demonstrated the you are out of your depth
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
Once a mechanic, always a mechanic.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
Depends on where you work and what you work on. If you do auto trans
work, lots of complex hydraulics. If you do power steering work, lots of hydraulics. If you work on brakes, hydraulics and, these days, rather complex hydraulics what with ABS and all. Most suspension dampers
utilise hydraulic principles. What about farm equipment, hydraulics.
Then you have earthmoving equipment, hydraulics again, and this was a
field I transitioned into after training on hydraulcs and diesel. Of
course, we then have fuel injection in all its forms, hydraulics again,
all the hydraulic principles in play.
˙˙My first experience with the swash plate concept would have been inf
arm hydraulics in the late 60s. Then in AC compressors, later, in a
AC compressors are an example of hydraulics?
Hydraulics and pneumatics plus thermodynamics - if you want to get technical.
of the theme, adjustable vane pumps in auto trans.
Absolutely nothing like aircraft hydraulics.
Principles are all the same. Know one, can transition to the other.
That's why the airlines upgraded motor mechanics to aircraft mechanics.
You have no point to argue since *history* negates your points.
The only true and correct fact, internal combustion engines never >>>>>>> left the airline business.
Split hairs all you like, but the jet engine is nothing like the
piston engines that it has replaced.
No hair splitting needed or wanted. A jet engine *IS* classified as >>>>> an *INTERNAL COMBUSTION ENGINE* no matter what you would like it to >>>>> be. It has an internal combustion chamber where a working fluid/gas >>>>> is evaporated, compressed, ignited and burnt. The expansion of the
burning gases acts on a turbine to cause rotation. In this case the >>>>> rotation of the turbine is used to power the intake air compressor. >>>>> Hmmm, that's a bit like a turbocharger, isn't it? The exhaust
thrust is the mode of power transfer.
Not these days.
Odd, I was under the impression that a jet propels itself forward
through a *reaction* to the exhaust thrust.
Nope on modern large jets, the trust from the tailpipe is a minor part
of the total.
Hate to tell you but, in a turbofan jet, that propulsion comes from the reaction of the turbine to said exhaust thrust which, in turn, applies torque to the turbofan.
Take away the exhaust thrust, you have *nothing*. The turbofan doesn't
rotate just because it feels like doing it.
Let me find a suitably *simple* animation for you. First one I see.
https://www.youtube.com/shorts/eMe55o3x-Is
Now, take out the turbine, will the *fan* turn and act a˙ bypass jet
stream at the rear? The exhaust thrust acts on the turbine! I think I
might have at one stage compared it to a turbocharger.
Let me put it plainly to you - if you don't have a reaction to the
exhaust thrust, you do not have a jet engine. The exhaust reaction on
the turbine turns the compressor which compresses the fuel air mix in
the combustion chamber - a continuous process. The turbofan is also
*driven on the same shaft as the compressor and the turbine.
FFS, I am
not a jet engine mechanic but I can see how a turbofan jet works. It
starts and ends with hot exhaust thrust, just depends on where it is applied.
Interesting? ROTFL!You reacted, you're interested. HTH.
Not only are you a smartarse, but a boring one at that.
You reacted, you found me interesting enough to respond. HTH.
On 19/11/2026 10:24 pm, Daryl wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
True for most car mechanics unless we are talking about the most basic
like brake and clutch or auto transmissions.
There's not much in the way of hydraulics in automatic transmissions
that the average mechanic ever comes into contact with. Most workshops
are limited to fluid and filter changes, and the only people who would
ever see the inside of an auto trans would be a rebuilder.
For me servicing Perkins diesels and repairing industrial construction
machinery hydraulics was what I did the most.
A tractor or Forklift mechanic would see more hydraulic work in a month
than the average car mechanic would see in a lifetime :)
Keithr0 wrote:
On 18/11/2026 7:17 pm, alvey wrote:
Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been anywhere
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, >>>>>>>> he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) >>>>>>> Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
near that engine, he has no fucking idea on the subject but because
of his OCD he can't help himself from having a go at Noddy.
And your little mate, he of the variable height, *always* knowss what
he's talking about hey Deryl...
Little Mr Knownothing sticks his oar in.
brave sir Keefy dashes in on his mangy steed like the true DATE warrior
that he is..
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he >>>>>>> has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise)
Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what had
been done (and not done) to the engine, the location where it failed and what it was doing at the time, all as reported by Daryl and Darren. I
showed the hottest part of the valve (base of fillet) where I said it
would part company. Lo and behold, that's where the valve head parted company with the stem. I described, with links, valve operation -
including lofting, overshoot, bounce and the rest. I laid the blame at a couple of clowns who didn't compensate for a thinner head gasket. Such compensation could have included a different cam profile, lighter valves
or stronger valves springs. No counter measures were adopted and the
engine failed exactly as predicted. They have 0.100" clearance specs for
a very good reason. Reduce that clearance by any significant amount and
the engine will fail at extremes of operation - like on conrod straight
at Bathurst, a run well known for stretching con rods on the big V8s of
the heyday. FFS, the A-GE(20) was already a highly strung little
performance engine from the get go so you don't dick with it without
knowing what you're doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. That is
a textbook valve overheat separation. Backtrack from there to the circumstances where and when it failed and it become crystal clear. "
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the
ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
alvey wrote:~~~~~~~~~~~~~~~
alvey wrote:
Keithr0 wrote:
On 13/11/2026 4:00 pm, Clocky wrote:
On 12/11/2026 1:03 pm, Keithr0 wrote:In your own words, prove it.
On 12/11/2026 1:48 pm, Clocky wrote:
On 6/11/2026 1:56 pm, Noddy wrote:Not above telling lies yourself, then claiming it was a joke.
On 6/11/2026 9:15 am, Daryl wrote:
On 5/11/2026 8:37 pm, Noddy wrote:
Actually Paul, myself and others laughed how you ridiculously >>>>>>>>>>> stripped back that Sub to try and fit your argument, and >>>>>>>>>>> still failed.
Feel free to cite the original comments so we can all look >>>>>>>>>> back and laugh :)
Must be sad to be him when he has to drag up ancient arguments >>>>>>>>> just to have a go at you, desperate times.
He's been suffering from relevance deprivation for years.....
It's your standard MO to recite your ancient lies about what
other people have said, hypocrite. Case in point your nonsense
above.
You're not only above telling lies you make a habit of it, hypocrite. >>>>
Prove what?
That you're an "habitual" liar? Or just an occassional one?
What? Not even a worn cliche in response Retcho?
I'm still waiting Retcho... Are you an "habitual" liar or an occassional one?
On 19/11/2026 10:23 pm, Xeno wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
Once a mechanic, always a mechanic.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
Depends on where you work and what you work on. If you do auto trans
work, lots of complex hydraulics. If you do power steering work, lots
of hydraulics. If you work on brakes, hydraulics and, these days,
rather complex hydraulics what with ABS and all. Most suspension
dampers utilise hydraulic principles. What about farm equipment,
hydraulics. Then you have earthmoving equipment, hydraulics again, and
this was a field I transitioned into after training on hydraulcs and
diesel. Of course, we then have fuel injection in all its forms,
hydraulics again, all the hydraulic principles in play.
˙˙My first experience with the swash plate concept would have been inf
arm hydraulics in the late 60s. Then in AC compressors, later, in a
AC compressors are an example of hydraulics?
Hydraulics and pneumatics plus thermodynamics - if you want to get
technical.
of the theme, adjustable vane pumps in auto trans.
Absolutely nothing like aircraft hydraulics.
Principles are all the same. Know one, can transition to the other.
That's why the airlines upgraded motor mechanics to aircraft
mechanics. You have no point to argue since *history* negates your
points.
I know and have known a lot of LAMEs, and AMEs, none of which started
out as motor mechanics. Some were airline apprentices, some got in a the bottom and worked their way up by study an practice, and many were
trained by the military.
The only true and correct fact, internal combustion engines
never left the airline business.
Split hairs all you like, but the jet engine is nothing like the >>>>>>> piston engines that it has replaced.
No hair splitting needed or wanted. A jet engine *IS* classified
as an *INTERNAL COMBUSTION ENGINE* no matter what you would like
it to be. It has an internal combustion chamber where a working
fluid/gas is evaporated, compressed, ignited and burnt. The
expansion of the burning gases acts on a turbine to cause
rotation. In this case the rotation of the turbine is used to
power the intake air compressor. Hmmm, that's a bit like a
turbocharger, isn't it? The exhaust thrust is the mode of power
transfer.
Not these days.
Odd, I was under the impression that a jet propels itself forward
through a *reaction* to the exhaust thrust.
Nope on modern large jets, the trust from the tailpipe is a minor
part of the total.
Hate to tell you but, in a turbofan jet, that propulsion comes from
the reaction of the turbine to said exhaust thrust which, in turn,
applies torque to the turbofan.
What a load of crap, you obviously have zero understanding of the
principles involved. The turbine that drives the fan is not driven by
the "Exhaust thrust" any more than the crankshaft in a piston engine
being driven by the exhaust. The engine has, in order, the compressor,
the burner cans, the turbine that drives the compressor, the turbine
that drives the fan then the tail pipe. The exhaust is what comes out of
the tail pipe, and contributes˙ part of the thrust.
Take away the exhaust thrust, you have *nothing*. The turbofan doesn't
rotate just because it feels like doing it.
Don't be so bloody condescending. It is driven by the hot gasses passing through the engine, it is part of the engine, not part of the exhaust.
As with a piston engine, the exhaust is where the energy not put to use
in the engine goes. In a piston engine, in most cases, it largely goes
to waste, in a turbo jet, it provides the actual power output, in a fan
jet it provides part of the output. In an airliner it contributes
anything from 1/4 to 1/10th of the output, in a military jet maybe 1/2
of the output.
On 20/11/2026 12:08 am, Axel wrote:
Keithr0 wrote:Mr Knowevenless comes to the rescue
On 18/11/2026 7:17 pm, alvey wrote:
Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, >>>>>>>>> he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) >>>>>>>> Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
anywhere near that engine, he has no fucking idea on the subject
but because of his OCD he can't help himself from having a go at
Noddy.
And your little mate, he of the variable height, *always* knowss
what he's talking about hey Deryl...
Little Mr Knownothing sticks his oar in.
brave sir Keefy dashes in on his mangy steed like the true DATE
warrior that he is..
(well rather badly).
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, >>>>>>>> he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) >>>>>>> Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what had
been done (and not done) to the engine, the location where it failed
and what it was doing at the time, all as reported by Daryl and
Darren. I showed the hottest part of the valve (base of fillet) where
I said it would part company. Lo and behold, that's where the valve
head parted company with the stem. I described, with links, valve
operation - including lofting, overshoot, bounce and the rest. I laid
the blame at a couple of clowns who didn't compensate for a thinner
head gasket. Such compensation could have included a different cam
profile, lighter valves or stronger valves springs. No counter
measures were adopted and the engine failed exactly as predicted.
They have 0.100" clearance specs for a very good reason. Reduce that
clearance by any significant amount and the engine will fail at
extremes of operation - like on conrod straight at Bathurst, a run
well known for stretching con rods on the big V8s of the heyday. FFS,
the A-GE(20) was already a highly strung little performance engine
from the get go so you don't dick with it without knowing what you're
doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. That
is a textbook valve overheat separation. Backtrack from there to the
circumstances where and when it failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the
ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
On 18/11/2026 7:17 pm, alvey wrote:
Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been anywhere
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, he >>>>>>> has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise)
Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
near that engine, he has no fucking idea on the subject but because
of his OCD he can't help himself from having a go at Noddy.
And your little mate, he of the variable height, *always* knowss what
he's talking about hey Deryl...
Little Mr Knownothing sticks his oar in.
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:I'm just stating the reason Xeno gave, viz.
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, >>>>>>>>> he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) >>>>>>>> Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so. >>>
"I laid out a clear step by step failure mode incorporating what had
been done (and not done) to the engine, the location where it failed
and what it was doing at the time, all as reported by Daryl and
Darren. I showed the hottest part of the valve (base of fillet) where
I said it would part company. Lo and behold, that's where the valve
head parted company with the stem. I described, with links, valve
operation - including lofting, overshoot, bounce and the rest. I laid
the blame at a couple of clowns who didn't compensate for a thinner
head gasket. Such compensation could have included a different cam
profile, lighter valves or stronger valves springs. No counter
measures were adopted and the engine failed exactly as predicted.
They have 0.100" clearance specs for a very good reason. Reduce that
clearance by any significant amount and the engine will fail at
extremes of operation - like on conrod straight at Bathurst, a run
well known for stretching con rods on the big V8s of the heyday. FFS,
the A-GE(20) was already a highly strung little performance engine
from the get go so you don't dick with it without knowing what you're
doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. That
is a textbook valve overheat separation. Backtrack from there to the
circumstances where and when it failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the cause
is in doubt. Xeno seems sure what that cause is, but I don't need to
make any decision about it.
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the >>>>>> ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
Keithr0 wrote:
On 20/11/2026 12:08 am, Axel wrote:
Keithr0 wrote:Mr Knowevenless comes to the rescue
On 18/11/2026 7:17 pm, alvey wrote:
Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, >>>>>>>>>> he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>> krypsis' argument is dead in the water!!. (Was never otherwise) >>>>>>>>> Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
anywhere near that engine, he has no fucking idea on the subject
but because of his OCD he can't help himself from having a go at
Noddy.
And your little mate, he of the variable height, *always* knowss
what he's talking about hey Deryl...
Little Mr Knownothing sticks his oar in.
brave sir Keefy dashes in on his mangy steed like the true DATE
warrior that he is..
I don't need to rescue him. he's quite capable of holding his own.
I'm just poking you because you reply to everything alvey, clocky, or Xeno says, just to poke at them.
your fellow DATE members, jonz, noddy, and lindsay get free passes, of course.
(well rather badly).
I didn't think so. but then I don't have your level of competence in childish behaviour
On 20/11/2026 11:00 am, Axel wrote:
Noddy wrote:
You have no business "stating reasons" that you personally do not
understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that you
look totally clueless by echoing something that you do not understand
as if it's factual when you have no idea as to it's veracity.
thinking you can read minds, makes you the dickhead
You're a fucking idiot Felix
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't
do one, you're not qualified to comment on cars, your leader xeno
says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what
had been done (and not done) to the engine, the location where it
failed and what it was doing at the time, all as reported by Daryl
and Darren. I showed the hottest part of the valve (base of fillet)
where I said it would part company. Lo and behold, that's where the
valve head parted company with the stem. I described, with links,
valve operation - including lofting, overshoot, bounce and the
rest. I laid the blame at a couple of clowns who didn't compensate
for a thinner head gasket. Such compensation could have included a
different cam profile, lighter valves or stronger valves springs.
No counter measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good reason.
Reduce that clearance by any significant amount and the engine will
fail at extremes of operation - like on conrod straight at
Bathurst, a run well known for stretching con rods on the big V8s
of the heyday. FFS, the A-GE(20) was already a highly strung little
performance engine from the get go so you don't dick with it
without knowing what you're doing. And Darren and Daryl certainly
didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet.
That is a textbook valve overheat separation. Backtrack from there
to the circumstances where and when it failed and it become crystal
clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I don't
need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
˙ROTLF
On 20/11/2026 6:10 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:08 am, Axel wrote:
Keithr0 wrote:Mr Knowevenless comes to the rescue
On 18/11/2026 7:17 pm, alvey wrote:
Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is >>>>>>>>>>>>> a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
anywhere near that engine, he has no fucking idea on the subject >>>>>>> but because of his OCD he can't help himself from having a go at >>>>>>> Noddy.
And your little mate, he of the variable height, *always* knowss
what he's talking about hey Deryl...
Little Mr Knownothing sticks his oar in.
brave sir Keefy dashes in on his mangy steed like the true DATE
warrior that he is..
I don't need to rescue him. he's quite capable of holding his own.
He has never once posted anything useful, just bitchy little comments.
I'm just poking you because you reply to everything alvey, clocky, or
Xeno says, just to poke at them.
Reply to everything alvey, clocky, or Xeno say? ROTFL, I have neither
the time or inclination to do that.
your fellow DATE members, jonz, noddy, and lindsay get free passes,
of course.
Your little mates get nothing but adulation from you.
(well rather badly).
I didn't think so. but then I don't have your level of competence in
childish behaviour
Ooh bitchy! I am devastated.
On 20-Nov-26 11:02 AM, Axel wrote:
Axel wrote:
Noddy wrote:
On 20/11/2026 8:19 am, Axel wrote:
Noddy wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your
leader xeno says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do not >>>>>> understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that
you look totally clueless by echoing something that you do not
understand as if it's factual when you have no idea as to it's
veracity.
thinking you can read minds, makes you the dickhead
~~~~~~~~~~~~~~~~~~
Sent *twice* two min. apart!. Is that *to be sure, to be sure*....OR
is that is the extent of yer memory span??. The latter for
me!!.??????>>
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge?
it's been discussed at length in many posts.
there's no question the valve impacted the piston, only the cause
is in doubt. Xeno seems sure what that cause is, but I don't need to
make any decision about it.
Keithr0 wrote:
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
noddy suggested..
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
On 20/11/2026 12:57 am, Noddy wrote:
There's not much in the way of hydraulics in automatic transmissions
that the average mechanic ever comes into contact with. Most workshops
are limited to fluid and filter changes, and the only people who would
ever see the inside of an auto trans would be a rebuilder.
Interestingly, the unbreakable automatic gear box in my No.1 daughter's RAV4, broke, to the extent that, when the pan was removed, all sorts of interesting bits of metal fell out.
Keithr0 wrote:Just as well :)
Mr Knowevenless comes to the rescue
I don't need to rescue him.
On 20/11/2026 8:51 am, Noddy wrote:Shut up Junior. No one was asking you for anything. Go back to playing GTA 5
There is absolutely zero need for you to ever echo the comments of
anyone who has ever posted them here, and as much as you like to be
your mental mate's squirming little cheerleader you have no fucking
idea at *all* if any comment he ever makes of a technical nature is
accurate which makes you reposting it as if it's some form of valid
argument look extremely stupid.
Hate to be
but I understood everything Xeno wrote anyway. so noddy was wrong, again
jonz wrote:
On 20-Nov-26 11:02 AM, Axel wrote:
Axel wrote:
Noddy wrote:
On 20/11/2026 8:19 am, Axel wrote:
Noddy wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your >>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do not >>>>>>> understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that
you look totally clueless by echoing something that you do not
understand as if it's factual when you have no idea as to it's
veracity.
thinking you can read minds, makes you the dickhead
~~~~~~~~~~~~~~~~~~
Sent *twice* two min. apart!. Is that *to be sure, to be sure*....OR
is that is the extent of yer memory span??. The latter for me!!.???
if you were half as smart as you think you are you would have noticed
it's not the same post
look totally clueless by echoing something that you do not understand asyou have no business telling me what to donoddy
I wasn't telling you what to do, dickhead. I was telling you that you
I wasn't telling you what to do, dickhead. I was telling you that youlook totally clueless by echoing something that you do not understand as
On 19/11/2026 10:23 pm, Xeno wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
Once a mechanic, always a mechanic.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
Depends on where you work and what you work on. If you do auto trans
work, lots of complex hydraulics. If you do power steering work, lots
of hydraulics. If you work on brakes, hydraulics and, these days,
rather complex hydraulics what with ABS and all. Most suspension
dampers utilise hydraulic principles. What about farm equipment,
hydraulics. Then you have earthmoving equipment, hydraulics again, and
this was a field I transitioned into after training on hydraulcs and
diesel. Of course, we then have fuel injection in all its forms,
hydraulics again, all the hydraulic principles in play.
˙˙My first experience with the swash plate concept would have been inf
arm hydraulics in the late 60s. Then in AC compressors, later, in a
AC compressors are an example of hydraulics?
Hydraulics and pneumatics plus thermodynamics - if you want to get
technical.
of the theme, adjustable vane pumps in auto trans.
Absolutely nothing like aircraft hydraulics.
Principles are all the same. Know one, can transition to the other.
That's why the airlines upgraded motor mechanics to aircraft
mechanics. You have no point to argue since *history* negates your
points.
I know and have known a lot of LAMEs, and AMEs, none of which started
out as motor mechanics. Some were airline apprentices, some got in a the bottom and worked their way up by study an practice, and many were
trained by the military.
The only true and correct fact, internal combustion engines
never left the airline business.
Split hairs all you like, but the jet engine is nothing like the >>>>>>> piston engines that it has replaced.
No hair splitting needed or wanted. A jet engine *IS* classified
as an *INTERNAL COMBUSTION ENGINE* no matter what you would like
it to be. It has an internal combustion chamber where a working
fluid/gas is evaporated, compressed, ignited and burnt. The
expansion of the burning gases acts on a turbine to cause
rotation. In this case the rotation of the turbine is used to
power the intake air compressor. Hmmm, that's a bit like a
turbocharger, isn't it? The exhaust thrust is the mode of power
transfer.
Not these days.
Odd, I was under the impression that a jet propels itself forward
through a *reaction* to the exhaust thrust.
Nope on modern large jets, the trust from the tailpipe is a minor
part of the total.
Hate to tell you but, in a turbofan jet, that propulsion comes from
the reaction of the turbine to said exhaust thrust which, in turn,
applies torque to the turbofan.
What a load of crap, you obviously have zero understanding of the
principles involved. The turbine that drives the fan is not driven by
the "Exhaust thrust" any more than the crankshaft in a piston engine
being driven by the exhaust. The engine has, in order, the compressor,
the burner cans, the turbine that drives the compressor, the turbine
that drives the fan then the tail pipe. The exhaust is what comes out of
the tail pipe, and contributes˙ part of the thrust.
Take away the exhaust thrust, you have *nothing*. The turbofan doesn't
rotate just because it feels like doing it.
Don't be so bloody condescending. It is driven by the hot gasses passing through the engine, it is part of the engine, not part of the exhaust.
As with a piston engine, the exhaust is where the energy not put to use
in the engine goes. In a piston engine, in most cases, it largely goes
to waste, in a turbo jet, it provides the actual power output, in a fan
jet it provides part of the output. In an airliner it contributes
anything from 1/4 to 1/10th of the output, in a military jet maybe 1/2
of the output.
Let me find a suitably *simple* animation for you. First one I see.
https://www.youtube.com/shorts/eMe55o3x-Is
Now, take out the turbine, will the *fan* turn and act a˙ bypass jet
stream at the rear? The exhaust thrust acts on the turbine! I think I
might have at one stage compared it to a turbocharger.
Let me put it plainly to you - if you don't have a reaction to the
exhaust thrust, you do not have a jet engine. The exhaust reaction on
the turbine turns the compressor which compresses the fuel air mix in
Nope, the compressor only compresses the input air prior to the fuel
being added in the burner cans, you don't seem to have a grasp on the
basic principles involved
the combustion chamber - a continuous process. The turbofan is also
*driven on the same shaft as the compressor and the turbine.
Nope, the fan is on a separate shaft coaxial to that driving the
compressor, it has a separate turbine to drive it. The turbine that
drives the compressor is known as the high pressure turbine, the one
that drives the fan is the low pressure turbine
FFS, I am not a jet engine mechanic but I can see how a turbofan jet
works. It starts and ends with hot exhaust thrust, just depends on
where it is applied.
Just the usual condescending crap, you are obviously not a jet engine mechanic since you do not seem to have an idea of how a turbo fan engine works.
Read and learn
https://en.wikipedia.org/wiki/Turbofan
Interesting? ROTFL!You reacted, you're interested. HTH.
Not only are you a smartarse, but a boring one at that.
You reacted, you found me interesting enough to respond. HTH.
On 20/11/2026 12:57 am, Noddy wrote:
On 19/11/2026 10:24 pm, Daryl wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been
for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
True for most car mechanics unless we are talking about the most
basic like brake and clutch or auto transmissions.
There's not much in the way of hydraulics in automatic transmissions
that the average mechanic ever comes into contact with. Most workshops
are limited to fluid and filter changes, and the only people who would
ever see the inside of an auto trans would be a rebuilder.
Interestingly, the unbreakable automatic gear box in my No.1 daughter's RAV4, broke, to the extent that, when the pan was removed, all sorts of interesting bits of metal fell out.
For me servicing Perkins diesels and repairing industrial
construction machinery hydraulics was what I did the most.
A tractor or Forklift mechanic would see more hydraulic work in a
month than the average car mechanic would see in a lifetime :)
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, >>>>>>>> he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) >>>>>>> Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent with
your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what had
been done (and not done) to the engine, the location where it failed
and what it was doing at the time, all as reported by Daryl and
Darren. I showed the hottest part of the valve (base of fillet) where
I said it would part company. Lo and behold, that's where the valve
head parted company with the stem. I described, with links, valve
operation - including lofting, overshoot, bounce and the rest. I laid
the blame at a couple of clowns who didn't compensate for a thinner
head gasket. Such compensation could have included a different cam
profile, lighter valves or stronger valves springs. No counter
measures were adopted and the engine failed exactly as predicted. They
have 0.100" clearance specs for a very good reason. Reduce that
clearance by any significant amount and the engine will fail at
extremes of operation - like on conrod straight at Bathurst, a run
well known for stretching con rods on the big V8s of the heyday. FFS,
the A-GE(20) was already a highly strung little performance engine
from the get go so you don't dick with it without knowing what you're
doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. That
is a textbook valve overheat separation. Backtrack from there to the
circumstances where and when it failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to accept xeno's explanation without question?
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the
ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:I'm just stating the reason Xeno gave, viz.
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, >>>>>>>>> he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and
krypsis' argument is dead in the water!!. (Was never otherwise) >>>>>>>> Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't do
one, you're not qualified to comment on cars, your leader xeno says so. >>>
"I laid out a clear step by step failure mode incorporating what had
been done (and not done) to the engine, the location where it failed
and what it was doing at the time, all as reported by Daryl and
Darren. I showed the hottest part of the valve (base of fillet) where
I said it would part company. Lo and behold, that's where the valve
head parted company with the stem. I described, with links, valve
operation - including lofting, overshoot, bounce and the rest. I laid
the blame at a couple of clowns who didn't compensate for a thinner
head gasket. Such compensation could have included a different cam
profile, lighter valves or stronger valves springs. No counter
measures were adopted and the engine failed exactly as predicted.
They have 0.100" clearance specs for a very good reason. Reduce that
clearance by any significant amount and the engine will fail at
extremes of operation - like on conrod straight at Bathurst, a run
well known for stretching con rods on the big V8s of the heyday. FFS,
the A-GE(20) was already a highly strung little performance engine
from the get go so you don't dick with it without knowing what you're
doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. That
is a textbook valve overheat separation. Backtrack from there to the
circumstances where and when it failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the cause
is in doubt. Xeno seems sure what that cause is, but I don't need to
make any decision about it.
So far there's been 8 explanations as to the cause of the failure,
have there?
and *none* of them have had anything to do with me despite all the >>>>>> ridiculous fucking noise he's made on the subject :)
unless you used a thinner head gasket as has been said
--
Linux Mint 22.3
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back to, >>>>>>>>>> he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked right >>>>>>>>>>> there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>> krypsis' argument is dead in the water!!. (Was never otherwise) >>>>>>>>> Who can prove my (and others) 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent
with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't
do one, you're not qualified to comment on cars, your leader xeno
says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what had
been done (and not done) to the engine, the location where it failed
and what it was doing at the time, all as reported by Daryl and
Darren. I showed the hottest part of the valve (base of fillet)
where I said it would part company. Lo and behold, that's where the
valve head parted company with the stem. I described, with links,
valve operation - including lofting, overshoot, bounce and the rest.
I laid the blame at a couple of clowns who didn't compensate for a
thinner head gasket. Such compensation could have included a
different cam profile, lighter valves or stronger valves springs. No
counter measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good reason.
Reduce that clearance by any significant amount and the engine will
fail at extremes of operation - like on conrod straight at Bathurst,
a run well known for stretching con rods on the big V8s of the
heyday. FFS, the A-GE(20) was already a highly strung little
performance engine from the get go so you don't dick with it without
knowing what you're doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. That
is a textbook valve overheat separation. Backtrack from there to the
circumstances where and when it failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I don't
need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he is correct. I have seen detailed descriptions of things that, despite the originator's conviction, proved to be completely wrong. The best that
you can say is that it is one possible explanation.
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't >>>>>> do one, you're not qualified to comment on cars, your leader xeno >>>>>> says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what
had been done (and not done) to the engine, the location where it
failed and what it was doing at the time, all as reported by Daryl
and Darren. I showed the hottest part of the valve (base of fillet) >>>>> where I said it would part company. Lo and behold, that's where the >>>>> valve head parted company with the stem. I described, with links,
valve operation - including lofting, overshoot, bounce and the
rest. I laid the blame at a couple of clowns who didn't compensate
for a thinner head gasket. Such compensation could have included a
different cam profile, lighter valves or stronger valves springs.
No counter measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good reason. >>>>> Reduce that clearance by any significant amount and the engine will >>>>> fail at extremes of operation - like on conrod straight at
Bathurst, a run well known for stretching con rods on the big V8s
of the heyday. FFS, the A-GE(20) was already a highly strung little >>>>> performance engine from the get go so you don't dick with it
without knowing what you're doing. And Darren and Daryl certainly
didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet.
That is a textbook valve overheat separation. Backtrack from there
to the circumstances where and when it failed and it become crystal >>>>> clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I don't
need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
noddy suggested..
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
On 20/11/2026 2:14 pm, Axel wrote:
but I understood everything Xeno wrote anyway. so noddy was wrong, again
Like fuck you did Felix. Half the shit he claimed he invented himself :)
On 20-Nov-26 8:38 PM, Axel wrote:
jonz wrote:
On 20-Nov-26 11:02 AM, Axel wrote:
Axel wrote:
Noddy wrote:
On 20/11/2026 8:19 am, Axel wrote:
Noddy wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
<bullshit flushed>
You have no business "stating reasons" that you personally do >>>>>>>> not understand, and cannot tell if they're valid or not.
you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you that >>>>>> you look totally clueless by echoing something that you do not
understand as if it's factual when you have no idea as to it's
veracity.
thinking you can read minds, makes you the dickhead
~~~~~~~~~~~~~~~~~~
Sent *twice* two min. apart!. Is that *to be sure, to be sure*....OR
is that is the extent of yer memory span??. The latter for
me!!.??? ???>>
if you were half as smart as you think you are you would have noticed
it's not the same post
~~~~~~~~~~~~~~~~~~~~~~~
OH, but it *IS* you clown!.??
11am.
felix
you look totally clueless by echoing something that you do notyou have no business telling me what to do˙ noddy
I wasn't telling you what to do, dickhead. I was telling you that
understand as if it's factual when you have no idea as to it's veracity. felix
thinking you can read minds, makes you the dickhead
11:02
˙And coz of memory loss:
˙˙ >> you have no business telling me what to do
I wasn't telling you what to do, dickhead. I was telling you thatyou look totally clueless by echoing something that you do not
understand as if it's factual when you have no idea as to it's veracity.
thinking you can read minds, makes you the dickhead
Same poast!. You still in denial??.
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
noddy suggested..
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
Just to clarify Felix, I said they are the three most probable causes of
a valve hitting a piston while the valve was fully extended from it's
guide which is what happened.
What *didn't* happen was any of the 7 or 8 nonsensical explanations your mental mate claimed, and that is obvious from the type of failure it was.I gave just one explanation composed of many parts. All parts were
On 20/11/2026 4:44 pm, Keithr0 wrote:It isn't as bad as you are making it out to be. The fixes are what I
On 20/11/2026 12:57 am, Noddy wrote:
There's not much in the way of hydraulics in automatic transmissions
that the average mechanic ever comes into contact with. Most
workshops are limited to fluid and filter changes, and the only
people who would ever see the inside of an auto trans would be a
rebuilder.
Interestingly, the unbreakable automatic gear box in my No.1
daughter's RAV4, broke, to the extent that, when the pan was removed,
all sorts of interesting bits of metal fell out.
Yeah, Toyota's having a bit of a reliability crisis at the moment. Ask anyone with a 300 series Land Cruiser about their engine failures :)
On 20/11/2026 2:14 pm, Axel wrote:
but I understood everything Xeno wrote anyway. so noddy was wrong, again
Like fuck you did Felix. Half the shit he claimed he invented himself :)
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is >>>>>>>>>>>>> a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't >>>>>> do one, you're not qualified to comment on cars, your leader xeno >>>>>> says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what
had been done (and not done) to the engine, the location where it
failed and what it was doing at the time, all as reported by Daryl
and Darren. I showed the hottest part of the valve (base of
fillet) where I said it would part company. Lo and behold, that's
where the valve head parted company with the stem. I described,
with links, valve operation - including lofting, overshoot, bounce
and the rest. I laid the blame at a couple of clowns who didn't
compensate for a thinner head gasket. Such compensation could have
included a different cam profile, lighter valves or stronger
valves springs. No counter measures were adopted and the engine
failed exactly as predicted. They have 0.100" clearance specs for
a very good reason. Reduce that clearance by any significant
amount and the engine will fail at extremes of operation - like on
conrod straight at Bathurst, a run well known for stretching con
rods on the big V8s of the heyday. FFS, the A-GE(20) was already a
highly strung little performance engine from the get go so you
don't dick with it without knowing what you're doing. And Darren
and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet.
That is a textbook valve overheat separation. Backtrack from there
to the circumstances where and when it failed and it become
crystal clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I don't
need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your understanding
of the subject matter is extremely limited, to the point where you have
no idea if the stuff your mental mate has regurgitated is accurate or
just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause is
in doubt. Xeno seems sure what that cause is, but I don't need to make
any decision about it.
Just as well, as your mental mate has no idea what he's talking about,
and you most definitely don't want to be seen not agreeing with him :)
On 20/11/2026 2:14 pm, Axel wrote:
but I understood everything Xeno wrote anyway. so noddy was wrong, again
Like fuck you did Felix. Half the shit he claimed he invented himself :)
Xeno wrote:
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I don't
need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
˙ROTLF
On 20/11/2026 6:10 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:08 am, Axel wrote:
Keithr0 wrote:Mr Knowevenless comes to the rescue
On 18/11/2026 7:17 pm, alvey wrote:
Daryl wrote:
On 18/11/2026 3:21 pm, jonz wrote:
On 18-Nov-26 12:08 PM, Axel wrote:No need to prove or disprove anything, Xeno has never been
jonz wrote:~~~~~~~~~~
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Ya think so? Sorry to disappoint you.
anywhere near that engine, he has no fucking idea on the subject >>>>>>> but because of his OCD he can't help himself from having a go at >>>>>>> Noddy.
And your little mate, he of the variable height, *always* knowss
what he's talking about hey Deryl...
Little Mr Knownothing sticks his oar in.
brave sir Keefy dashes in on his mangy steed like the true DATE
warrior that he is..
I don't need to rescue him. he's quite capable of holding his own.
He has never once posted anything useful... <snip>
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in his
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your understanding
of the subject matter is extremely limited, to the point where you
have no idea if the stuff your mental mate has regurgitated is
accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause is
in doubt. Xeno seems sure what that cause is, but I don't need to
make any decision about it.
Just as well, as your mental mate has no idea what he's talking about,
and you most definitely don't want to be seen not agreeing with him :)
time, he even stated "only the cause is in doubt" but then goes on to
endorse what Xeno says when its obvious he doesn't understand any of it himself so why bother to reply at all.
On 20/11/2026 9:09 pm, Noddy wrote:
On 20/11/2026 2:14 pm, Axel wrote:Maybe Felix is an expert in the gobbledygook language or was it Klingon, makes about the same amount of sense.
but I understood everything Xeno wrote anyway. so noddy was wrong, again
Like fuck you did Felix. Half the shit he claimed he invented himself :)
Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
On 20/11/2026 9:00 pm, Noddy wrote:
Just as well, as your mental mate has no idea what he's talking about,Felix replies simply because he has nothing else to do to fill in his
and you most definitely don't want to be seen not agreeing with him :)
time, he even stated "only the cause is in doubt" but then goes on to endorse what Xeno says when its obvious he doesn't understand any of it himself so why bother to reply at all.
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is >>>>>>>>>>>>>>> a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your
leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what >>>>>>> had been done (and not done) to the engine, the location where it >>>>>>> failed and what it was doing at the time, all as reported by
Daryl and Darren. I showed the hottest part of the valve (base of >>>>>>> fillet) where I said it would part company. Lo and behold, that's >>>>>>> where the valve head parted company with the stem. I described, >>>>>>> with links, valve operation - including lofting, overshoot,
bounce and the rest. I laid the blame at a couple of clowns who >>>>>>> didn't compensate for a thinner head gasket. Such compensation
could have included a different cam profile, lighter valves or
stronger valves springs. No counter measures were adopted and the >>>>>>> engine failed exactly as predicted. They have 0.100" clearance
specs for a very good reason. Reduce that clearance by any
significant amount and the engine will fail at extremes of
operation - like on conrod straight at Bathurst, a run well known >>>>>>> for stretching con rods on the big V8s of the heyday. FFS, the A- >>>>>>> GE(20) was already a highly strung little performance engine from >>>>>>> the get go so you don't dick with it without knowing what you're >>>>>>> doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>> That is a textbook valve overheat separation. Backtrack from
there to the circumstances where and when it failed and it become >>>>>>> crystal clear. "
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in
many posts. there's no question the valve impacted the piston, only >>>>> the cause is in doubt. Xeno seems sure what that cause is, but I
don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely wrong.
The best that you can say is that it is one possible explanation.
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
The broken valve spring would have been visible and wasn't
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
On 20/11/2026 10:17 pm, Axel wrote:
Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
It could have been any one of those things Felix, and not having
dismantled the engine to check I couldn't tell you. Neither could your
mental mate, but unlike him I'm certainly not going to guess and make up
a load of waffling shit to try to pretend I know :)
On 20/11/2026 9:09 pm, Noddy wrote:
On 20/11/2026 2:14 pm, Axel wrote:
but I understood everything Xeno wrote anyway. so noddy was wrong, again
Like fuck you did Felix. Half the shit he claimed he invented himself :)
All I wrote was from what I saw and what you two clowns wrote. It wasn't rocket science, I just put two and two together and the word *idiots* flashed up.
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is >>>>>>>>>>>>>> a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't >>>>>>> do one, you're not qualified to comment on cars, your leader xeno >>>>>>> says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what
had been done (and not done) to the engine, the location where it >>>>>> failed and what it was doing at the time, all as reported by Daryl >>>>>> and Darren. I showed the hottest part of the valve (base of
fillet) where I said it would part company. Lo and behold, that's >>>>>> where the valve head parted company with the stem. I described,
with links, valve operation - including lofting, overshoot, bounce >>>>>> and the rest. I laid the blame at a couple of clowns who didn't
compensate for a thinner head gasket. Such compensation could have >>>>>> included a different cam profile, lighter valves or stronger
valves springs. No counter measures were adopted and the engine
failed exactly as predicted. They have 0.100" clearance specs for >>>>>> a very good reason. Reduce that clearance by any significant
amount and the engine will fail at extremes of operation - like on >>>>>> conrod straight at Bathurst, a run well known for stretching con
rods on the big V8s of the heyday. FFS, the A-GE(20) was already a >>>>>> highly strung little performance engine from the get go so you
don't dick with it without knowing what you're doing. And Darren
and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet.
That is a textbook valve overheat separation. Backtrack from there >>>>>> to the circumstances where and when it failed and it become
crystal clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I don't
need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
noddy suggested..
(A) It broke a valve spring.
That would have been still in the engine.
(B) it suffered a collet failure that caused the valve to drop.
That would have still been in the engine.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
Unlikely, the engine wasn't new. If it had the valve would have been
popped fully open, then stuck. That would have left a different trail of destruction and, likely, the valve head would not have parted company
with the stem - just bent the stem. When they part at the fillet like
that one did, you're looking at heat related events.
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in his
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause is
in doubt. Xeno seems sure what that cause is, but I don't need to
make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
time, he even stated "only the cause is in doubt" but then goes on to endorse what Xeno says when its obvious he doesn't understand any of
it himself so why bother to reply at all.
On 20/11/2026 10:25 pm, Daryl wrote:
On 20/11/2026 9:09 pm, Noddy wrote:
On 20/11/2026 2:14 pm, Axel wrote:Maybe Felix is an expert in the gobbledygook language or was it
but I understood everything Xeno wrote anyway. so noddy was wrong,
again
Like fuck you did Felix. Half the shit he claimed he invented
himself :)
Klingon, makes about the same amount of sense.
Felix is the perfect sock puppet for the mental case. He's dumber than dogshit,
and swallows every bit of waffling crap
that the mental maggot throws at him because it sounds impressive.
He has no fucking idea.
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is a >>>>>>>>>>>>> dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't >>>>>> do one, you're not qualified to comment on cars, your leader xeno >>>>>> says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what
had been done (and not done) to the engine, the location where it
failed and what it was doing at the time, all as reported by Daryl
and Darren. I showed the hottest part of the valve (base of fillet) >>>>> where I said it would part company. Lo and behold, that's where the >>>>> valve head parted company with the stem. I described, with links,
valve operation - including lofting, overshoot, bounce and the
rest. I laid the blame at a couple of clowns who didn't compensate
for a thinner head gasket. Such compensation could have included a
different cam profile, lighter valves or stronger valves springs.
No counter measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good reason. >>>>> Reduce that clearance by any significant amount and the engine will >>>>> fail at extremes of operation - like on conrod straight at
Bathurst, a run well known for stretching con rods on the big V8s
of the heyday. FFS, the A-GE(20) was already a highly strung little >>>>> performance engine from the get go so you don't dick with it
without knowing what you're doing. And Darren and Daryl certainly
didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet.
That is a textbook valve overheat separation. Backtrack from there
to the circumstances where and when it failed and it become crystal >>>>> clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I don't
need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is >>>>>>>>>>>>>>> a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your
leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what >>>>>>> had been done (and not done) to the engine, the location where it >>>>>>> failed and what it was doing at the time, all as reported by
Daryl and Darren. I showed the hottest part of the valve (base of >>>>>>> fillet) where I said it would part company. Lo and behold, that's >>>>>>> where the valve head parted company with the stem. I described, >>>>>>> with links, valve operation - including lofting, overshoot,
bounce and the rest. I laid the blame at a couple of clowns who >>>>>>> didn't compensate for a thinner head gasket. Such compensation
could have included a different cam profile, lighter valves or
stronger valves springs. No counter measures were adopted and the >>>>>>> engine failed exactly as predicted. They have 0.100" clearance
specs for a very good reason. Reduce that clearance by any
significant amount and the engine will fail at extremes of
operation - like on conrod straight at Bathurst, a run well known >>>>>>> for stretching con rods on the big V8s of the heyday. FFS, the A- >>>>>>> GE(20) was already a highly strung little performance engine from >>>>>>> the get go so you don't dick with it without knowing what you're >>>>>>> doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>> That is a textbook valve overheat separation. Backtrack from
there to the circumstances where and when it failed and it become >>>>>>> crystal clear. "
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in
many posts. there's no question the valve impacted the piston, only >>>>> the cause is in doubt. Xeno seems sure what that cause is, but I
don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely wrong.
The best that you can say is that it is one possible explanation.
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
The broken valve spring would have been visible and wasn't
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it grabbed.
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in his
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause is
in doubt. Xeno seems sure what that cause is, but I don't need to
make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
time, he even stated "only the cause is in doubt" but then goes on to
I have absolutely no doubt as to the cause. You and Darren have no clue!
endorse what Xeno says when its obvious he doesn't understand any of
it himself so why bother to reply at all.
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your
leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what >>>>>>> had been done (and not done) to the engine, the location where
it failed and what it was doing at the time, all as reported by >>>>>>> Daryl and Darren. I showed the hottest part of the valve (base
of fillet) where I said it would part company. Lo and behold,
that's where the valve head parted company with the stem. I
described, with links, valve operation - including lofting,
overshoot, bounce and the rest. I laid the blame at a couple of >>>>>>> clowns who didn't compensate for a thinner head gasket. Such
compensation could have included a different cam profile,
lighter valves or stronger valves springs. No counter measures
were adopted and the engine failed exactly as predicted. They
have 0.100" clearance specs for a very good reason. Reduce that >>>>>>> clearance by any significant amount and the engine will fail at >>>>>>> extremes of operation - like on conrod straight at Bathurst, a
run well known for stretching con rods on the big V8s of the
heyday. FFS, the A-GE(20) was already a highly strung little
performance engine from the get go so you don't dick with it
without knowing what you're doing. And Darren and Daryl
certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>> That is a textbook valve overheat separation. Backtrack from
there to the circumstances where and when it failed and it
become crystal clear. "
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in
many posts. there's no question the valve impacted the piston,
only the cause is in doubt. Xeno seems sure what that cause is,
but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that
he is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely wrong.
The best that you can say is that it is one possible explanation.
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
The broken valve spring would have been visible and wasn't
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
On 20/11/2026 4:44 pm, Keithr0 wrote:
On 20/11/2026 12:57 am, Noddy wrote:
On 19/11/2026 10:24 pm, Daryl wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't been >>>>> for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job.
True for most car mechanics unless we are talking about the most
basic like brake and clutch or auto transmissions.
There's not much in the way of hydraulics in automatic transmissions
that the average mechanic ever comes into contact with. Most
workshops are limited to fluid and filter changes, and the only
people who would ever see the inside of an auto trans would be a
rebuilder.
Interestingly, the unbreakable automatic gear box in my No.1
daughter's RAV4, broke, to the extent that, when the pan was removed,
all sorts of interesting bits of metal fell out.
No such a thing as unbreakable. You can make something foolproof but
fools are damnably ingenious.
For me servicing Perkins diesels and repairing industrial
construction machinery hydraulics was what I did the most.
A tractor or Forklift mechanic would see more hydraulic work in a
month than the average car mechanic would see in a lifetime :)
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause
is in doubt. Xeno seems sure what that cause is, but I don't need
to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
his time, he even stated "only the cause is in doubt" but then goes
on to
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
On 20/11/2026 10:16 pm, Xeno wrote:
On 20/11/2026 9:09 pm, Noddy wrote:
On 20/11/2026 2:14 pm, Axel wrote:
but I understood everything Xeno wrote anyway. so noddy was wrong,
again
Like fuck you did Felix. Half the shit he claimed he invented himself :)
All I wrote was from what I saw and what you two clowns wrote. It
wasn't rocket science, I just put two and two together and the word
*idiots* flashed up.
Anybody who has actually been involved in analysing situations like this would know that it is virtually impossible to assign a single cause.
What you propose is one possibility, but of course, given your
superiority complex, you are unable to accept that it isn't the only possibility - the clown is you.
On 20/11/2026 10:05 pm, Xeno wrote:
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is >>>>>>>>>>>>>>> a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your
leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what >>>>>>> had been done (and not done) to the engine, the location where it >>>>>>> failed and what it was doing at the time, all as reported by
Daryl and Darren. I showed the hottest part of the valve (base of >>>>>>> fillet) where I said it would part company. Lo and behold, that's >>>>>>> where the valve head parted company with the stem. I described, >>>>>>> with links, valve operation - including lofting, overshoot,
bounce and the rest. I laid the blame at a couple of clowns who >>>>>>> didn't compensate for a thinner head gasket. Such compensation
could have included a different cam profile, lighter valves or
stronger valves springs. No counter measures were adopted and the >>>>>>> engine failed exactly as predicted. They have 0.100" clearance
specs for a very good reason. Reduce that clearance by any
significant amount and the engine will fail at extremes of
operation - like on conrod straight at Bathurst, a run well known >>>>>>> for stretching con rods on the big V8s of the heyday. FFS, the A- >>>>>>> GE(20) was already a highly strung little performance engine from >>>>>>> the get go so you don't dick with it without knowing what you're >>>>>>> doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>> That is a textbook valve overheat separation. Backtrack from
there to the circumstances where and when it failed and it become >>>>>>> crystal clear. "
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in
many posts. there's no question the valve impacted the piston, only >>>>> the cause is in doubt. Xeno seems sure what that cause is, but I
don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely wrong.
The best that you can say is that it is one possible explanation.
noddy suggested..
(A) It broke a valve spring.
That would have been still in the engine.
(B) it suffered a collet failure that caused the valve to drop.
That would have still been in the engine.
your point is?
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
Unlikely, the engine wasn't new. If it had the valve would have been
popped fully open, then stuck. That would have left a different trail
of destruction and, likely, the valve head would not have parted
company with the stem - just bent the stem. When they part at the
fillet like that one did, you're looking at heat related events.
On 20/11/2026 10:00 pm, Xeno wrote:
And you're not willing to consider any other cause.
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is >>>>>>>>>>>>>> a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you didn't >>>>>>> do one, you're not qualified to comment on cars, your leader xeno >>>>>>> says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what
had been done (and not done) to the engine, the location where it >>>>>> failed and what it was doing at the time, all as reported by Daryl >>>>>> and Darren. I showed the hottest part of the valve (base of
fillet) where I said it would part company. Lo and behold, that's >>>>>> where the valve head parted company with the stem. I described,
with links, valve operation - including lofting, overshoot, bounce >>>>>> and the rest. I laid the blame at a couple of clowns who didn't
compensate for a thinner head gasket. Such compensation could have >>>>>> included a different cam profile, lighter valves or stronger
valves springs. No counter measures were adopted and the engine
failed exactly as predicted. They have 0.100" clearance specs for >>>>>> a very good reason. Reduce that clearance by any significant
amount and the engine will fail at extremes of operation - like on >>>>>> conrod straight at Bathurst, a run well known for stretching con
rods on the big V8s of the heyday. FFS, the A-GE(20) was already a >>>>>> highly strung little performance engine from the get go so you
don't dick with it without knowing what you're doing. And Darren
and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet.
That is a textbook valve overheat separation. Backtrack from there >>>>>> to the circumstances where and when it failed and it become
crystal clear. "
So, having no knowledge of the subject, you are willing to accept
xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in many
posts. there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I don't
need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that, despite
the originator's conviction, proved to be completely wrong. The best
that you can say is that it is one possible explanation.
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
On 21/11/2026 6:09 am, Rod Speed wrote:
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your >>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what >>>>>>>> had been done (and not done) to the engine, the location where >>>>>>>> it failed and what it was doing at the time, all as reported by >>>>>>>> Daryl and Darren. I showed the hottest part of the valve (base >>>>>>>> of fillet) where I said it would part company. Lo and behold, >>>>>>>> that's where the valve head parted company with the stem. I
described, with links, valve operation - including lofting,
overshoot, bounce and the rest. I laid the blame at a couple of >>>>>>>> clowns who didn't compensate for a thinner head gasket. Such
compensation could have included a different cam profile,
lighter valves or stronger valves springs. No counter measures >>>>>>>> were adopted and the engine failed exactly as predicted. They >>>>>>>> have 0.100" clearance specs for a very good reason. Reduce that >>>>>>>> clearance by any significant amount and the engine will fail at >>>>>>>> extremes of operation - like on conrod straight at Bathurst, a >>>>>>>> run well known for stretching con rods on the big V8s of the
heyday. FFS, the A- GE(20) was already a highly strung little >>>>>>>> performance engine from the get go so you don't dick with it
without knowing what you're doing. And Darren and Daryl
certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>>> That is a textbook valve overheat separation. Backtrack from
there to the circumstances where and when it failed and it
become crystal clear. "
So, having no knowledge of the subject, you are willing to accept >>>>>>> xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in
many posts. there's no question the valve impacted the piston,
only the cause is in doubt. Xeno seems sure what that cause is,
but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that
he is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely wrong. >>>>> The best that you can say is that it is one possible explanation.
There is no other explanation coming from the dumb and dumber crew.
Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
The broken valve spring would have been visible and wasn't
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in his
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause
is in doubt. Xeno seems sure what that cause is, but I don't need
to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
time, he even stated "only the cause is in doubt" but then goes on to
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
endorse what Xeno says when its obvious he doesn't understand any of
it himself so why bother to reply at all.
On 20/11/2026 9:52 pm, Xeno wrote:
On 20/11/2026 4:44 pm, Keithr0 wrote:
On 20/11/2026 12:57 am, Noddy wrote:
On 19/11/2026 10:24 pm, Daryl wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't
been for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job. >>>>>
True for most car mechanics unless we are talking about the most
basic like brake and clutch or auto transmissions.
There's not much in the way of hydraulics in automatic transmissions
that the average mechanic ever comes into contact with. Most
workshops are limited to fluid and filter changes, and the only
people who would ever see the inside of an auto trans would be a
rebuilder.
Interestingly, the unbreakable automatic gear box in my No.1
daughter's RAV4, broke, to the extent that, when the pan was removed,
all sorts of interesting bits of metal fell out.
No such a thing as unbreakable. You can make something foolproof but
fools are damnably ingenious.
It just let go in normal operation, suddenly no drive.
For me servicing Perkins diesels and repairing industrial
construction machinery hydraulics was what I did the most.
A tractor or Forklift mechanic would see more hydraulic work in a
month than the average car mechanic would see in a lifetime :)
On 21/11/2026 1:09 pm, Keithr0 wrote:
On 21/11/2026 6:09 am, Rod Speed wrote:
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle from the get-go, >>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>> what had been done (and not done) to the engine, the location >>>>>>>>> where it failed and what it was doing at the time, all as
reported by Daryl and Darren. I showed the hottest part of the >>>>>>>>> valve (base of fillet) where I said it would part company. Lo >>>>>>>>> and behold, that's where the valve head parted company with >>>>>>>>> the stem. I described, with links, valve operation - including >>>>>>>>> lofting, overshoot, bounce and the rest. I laid the blame at a >>>>>>>>> couple of clowns who didn't compensate for a thinner head
gasket. Such compensation could have included a different cam >>>>>>>>> profile, lighter valves or stronger valves springs. No counter >>>>>>>>> measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good >>>>>>>>> reason. Reduce that clearance by any significant amount and >>>>>>>>> the engine will fail at extremes of operation - like on conrod >>>>>>>>> straight at Bathurst, a run well known for stretching con rods >>>>>>>>> on the big V8s of the heyday. FFS, the A- GE(20) was already a >>>>>>>>> highly strung little performance engine from the get go so you >>>>>>>>> don't dick with it without knowing what you're doing. And
Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the
fillet. That is a textbook valve overheat separation.
Backtrack from there to the circumstances where and when it >>>>>>>>> failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in >>>>>>> many posts. there's no question the valve impacted the piston,
only the cause is in doubt. Xeno seems sure what that cause is, >>>>>>> but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that >>>>>> he is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely
wrong. The best that you can say is that it is one possible
explanation.
There is no other explanation coming from the dumb and dumber
crew. Well, they did try to blame it all on a faulty valve - a
copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
The broken valve spring would have been visible and wasn't
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed. The
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
Xeno wrote:
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed. The
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the fillet?
On 20/11/2026 10:05 pm, Xeno wrote:
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge is >>>>>>>>>>>>>>> a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never
otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is consistent >>>>>>>>> with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your
leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what >>>>>>> had been done (and not done) to the engine, the location where it >>>>>>> failed and what it was doing at the time, all as reported by
Daryl and Darren. I showed the hottest part of the valve (base of >>>>>>> fillet) where I said it would part company. Lo and behold, that's >>>>>>> where the valve head parted company with the stem. I described, >>>>>>> with links, valve operation - including lofting, overshoot,
bounce and the rest. I laid the blame at a couple of clowns who >>>>>>> didn't compensate for a thinner head gasket. Such compensation
could have included a different cam profile, lighter valves or
stronger valves springs. No counter measures were adopted and the >>>>>>> engine failed exactly as predicted. They have 0.100" clearance
specs for a very good reason. Reduce that clearance by any
significant amount and the engine will fail at extremes of
operation - like on conrod straight at Bathurst, a run well known >>>>>>> for stretching con rods on the big V8s of the heyday. FFS, the A- >>>>>>> GE(20) was already a highly strung little performance engine from >>>>>>> the get go so you don't dick with it without knowing what you're >>>>>>> doing. And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>> That is a textbook valve overheat separation. Backtrack from
there to the circumstances where and when it failed and it become >>>>>>> crystal clear. "
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in
many posts. there's no question the valve impacted the piston, only >>>>> the cause is in doubt. Xeno seems sure what that cause is, but I
don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that he
is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely wrong.
The best that you can say is that it is one possible explanation.
noddy suggested..
(A) It broke a valve spring.
That would have been still in the engine.
(B) it suffered a collet failure that caused the valve to drop.
That would have still been in the engine.
your point is?
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
Unlikely, the engine wasn't new. If it had the valve would have been
popped fully open, then stuck. That would have left a different trail
of destruction and, likely, the valve head would not have parted
company with the stem - just bent the stem. When they part at the
fillet like that one did, you're looking at heat related events.
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber. It's
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed.
The fact that the valve separated at the hot point tends to negate
collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the
fillet?
one Darren posted early on. And reposted it too.
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in his
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause
is in doubt. Xeno seems sure what that cause is, but I don't need
to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
time, he even stated "only the cause is in doubt" but then goes on to
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
On 20/11/2026 9:52 pm, Xeno wrote:
On 20/11/2026 4:44 pm, Keithr0 wrote:
On 20/11/2026 12:57 am, Noddy wrote:
On 19/11/2026 10:24 pm, Daryl wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't
been for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job. >>>>>
True for most car mechanics unless we are talking about the most
basic like brake and clutch or auto transmissions.
There's not much in the way of hydraulics in automatic transmissions
that the average mechanic ever comes into contact with. Most
workshops are limited to fluid and filter changes, and the only
people who would ever see the inside of an auto trans would be a
rebuilder.
Interestingly, the unbreakable automatic gear box in my No.1
daughter's RAV4, broke, to the extent that, when the pan was removed,
all sorts of interesting bits of metal fell out.
No such a thing as unbreakable. You can make something foolproof but
fools are damnably ingenious.
It just let go in normal operation, suddenly no drive.
On 21/11/2026 10:43 am, Keithr0 wrote:
On 20/11/2026 10:05 pm, Xeno wrote:
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:~~~~~~~~~~~~~~~~~~~~
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going back >>>>>>>>>>>>>> to, he has zero idea what he's talking about.
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, and >>>>>>>>>>>>> krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you
didn't do one, you're not qualified to comment on cars, your >>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating what >>>>>>>> had been done (and not done) to the engine, the location where >>>>>>>> it failed and what it was doing at the time, all as reported by >>>>>>>> Daryl and Darren. I showed the hottest part of the valve (base >>>>>>>> of fillet) where I said it would part company. Lo and behold, >>>>>>>> that's where the valve head parted company with the stem. I
described, with links, valve operation - including lofting,
overshoot, bounce and the rest. I laid the blame at a couple of >>>>>>>> clowns who didn't compensate for a thinner head gasket. Such
compensation could have included a different cam profile,
lighter valves or stronger valves springs. No counter measures >>>>>>>> were adopted and the engine failed exactly as predicted. They >>>>>>>> have 0.100" clearance specs for a very good reason. Reduce that >>>>>>>> clearance by any significant amount and the engine will fail at >>>>>>>> extremes of operation - like on conrod straight at Bathurst, a >>>>>>>> run well known for stretching con rods on the big V8s of the
heyday. FFS, the A- GE(20) was already a highly strung little >>>>>>>> performance engine from the get go so you don't dick with it
without knowing what you're doing. And Darren and Daryl
certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>>> That is a textbook valve overheat separation. Backtrack from
there to the circumstances where and when it failed and it
become crystal clear. "
So, having no knowledge of the subject, you are willing to accept >>>>>>> xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in
many posts. there's no question the valve impacted the piston,
only the cause is in doubt. Xeno seems sure what that cause is,
but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that
he is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely wrong. >>>>> The best that you can say is that it is one possible explanation.
noddy suggested..
(A) It broke a valve spring.
That would have been still in the engine.
(B) it suffered a collet failure that caused the valve to drop.
That would have still been in the engine.
your point is?
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
Unlikely, the engine wasn't new. If it had the valve would have been
popped fully open, then stuck. That would have left a different trail
of destruction and, likely, the valve head would not have parted
company with the stem - just bent the stem. When they part at the
fillet like that one did, you're looking at heat related events.
More speculation from someone who has never been within 100's of km of
that engine.
On 21/11/2026 1:09 pm, Keithr0 wrote:
On 21/11/2026 6:09 am, Rod Speed wrote:
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, >>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>> what had been done (and not done) to the engine, the location >>>>>>>>> where it failed and what it was doing at the time, all as
reported by Daryl and Darren. I showed the hottest part of the >>>>>>>>> valve (base of fillet) where I said it would part company. Lo >>>>>>>>> and behold, that's where the valve head parted company with the >>>>>>>>> stem. I described, with links, valve operation - including
lofting, overshoot, bounce and the rest. I laid the blame at a >>>>>>>>> couple of clowns who didn't compensate for a thinner head
gasket. Such compensation could have included a different cam >>>>>>>>> profile, lighter valves or stronger valves springs. No counter >>>>>>>>> measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good >>>>>>>>> reason. Reduce that clearance by any significant amount and the >>>>>>>>> engine will fail at extremes of operation - like on conrod
straight at Bathurst, a run well known for stretching con rods >>>>>>>>> on the big V8s of the heyday. FFS, the A- GE(20) was already a >>>>>>>>> highly strung little performance engine from the get go so you >>>>>>>>> don't dick with it without knowing what you're doing. And
Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>>>> That is a textbook valve overheat separation. Backtrack from >>>>>>>>> there to the circumstances where and when it failed and it
become crystal clear. "
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in >>>>>>> many posts. there's no question the valve impacted the piston,
only the cause is in doubt. Xeno seems sure what that cause is, >>>>>>> but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that >>>>>> he is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely
wrong. The best that you can say is that it is one possible
explanation.
There is no other explanation coming from the dumb and dumber crew. >>>>> Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
The broken valve spring would have been visible and wasn't
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed. The
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:˙The broken valve spring would have been visible and wasn't
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, >>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>> what had been done (and not done) to the engine, the location >>>>>>>>> where it failed and what it was doing at the time, all as
reported by Daryl and Darren. I showed the hottest part of the >>>>>>>>> valve (base of fillet) where I said it would part company. Lo >>>>>>>>> and behold, that's where the valve head parted company with the >>>>>>>>> stem. I described, with links, valve operation - including
lofting, overshoot, bounce and the rest. I laid the blame at a >>>>>>>>> couple of clowns who didn't compensate for a thinner head
gasket. Such compensation could have included a different cam >>>>>>>>> profile, lighter valves or stronger valves springs. No counter >>>>>>>>> measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good >>>>>>>>> reason. Reduce that clearance by any significant amount and the >>>>>>>>> engine will fail at extremes of operation - like on conrod
straight at Bathurst, a run well known for stretching con rods >>>>>>>>> on the big V8s of the heyday. FFS, the A- GE(20) was already a >>>>>>>>> highly strung little performance engine from the get go so you >>>>>>>>> don't dick with it without knowing what you're doing. And
Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>>>> That is a textbook valve overheat separation. Backtrack from >>>>>>>>> there to the circumstances where and when it failed and it
become crystal clear. "
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in >>>>>>> many posts. there's no question the valve impacted the piston,
only the cause is in doubt. Xeno seems sure what that cause is, >>>>>>> but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that >>>>>> he is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely
wrong. The best that you can say is that it is one possible
explanation.
There is no other explanation coming from the dumb and dumber crew. >>>>> Well, they did try to blame it all on a faulty valve - a copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
Complete ignorant bullshit with the collet itself
and the it is easy to determine why the head
separated from the valve stem by metalurgy
Keithr0 wrote:
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept >>>>>>> xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause >>>>>> is in doubt. Xeno seems sure what that cause is, but I don't need >>>>>> to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
his time, he even stated "only the cause is in doubt" but then goes
on to
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
yes. and there's one here, and his moniker is noddy!
On 21/11/2026 1:13 pm, Keithr0 wrote:
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept >>>>>>> xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause >>>>>> is in doubt. Xeno seems sure what that cause is, but I don't need >>>>>> to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
his time, he even stated "only the cause is in doubt" but then goes
on to
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
My interpretation comes from *experience* in the trade.
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
endorse what Xeno says when its obvious he doesn't understand any of
it himself so why bother to reply at all.
On 21/11/2026 3:08 pm, Daryl wrote:
On 21/11/2026 10:43 am, Keithr0 wrote:
On 20/11/2026 10:05 pm, Xeno wrote:
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, >>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>> what had been done (and not done) to the engine, the location >>>>>>>>> where it failed and what it was doing at the time, all as
reported by Daryl and Darren. I showed the hottest part of the >>>>>>>>> valve (base of fillet) where I said it would part company. Lo >>>>>>>>> and behold, that's where the valve head parted company with the >>>>>>>>> stem. I described, with links, valve operation - including
lofting, overshoot, bounce and the rest. I laid the blame at a >>>>>>>>> couple of clowns who didn't compensate for a thinner head
gasket. Such compensation could have included a different cam >>>>>>>>> profile, lighter valves or stronger valves springs. No counter >>>>>>>>> measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good >>>>>>>>> reason. Reduce that clearance by any significant amount and the >>>>>>>>> engine will fail at extremes of operation - like on conrod
straight at Bathurst, a run well known for stretching con rods >>>>>>>>> on the big V8s of the heyday. FFS, the A- GE(20) was already a >>>>>>>>> highly strung little performance engine from the get go so you >>>>>>>>> don't dick with it without knowing what you're doing. And
Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the fillet. >>>>>>>>> That is a textbook valve overheat separation. Backtrack from >>>>>>>>> there to the circumstances where and when it failed and it
become crystal clear. "
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in >>>>>>> many posts. there's no question the valve impacted the piston,
only the cause is in doubt. Xeno seems sure what that cause is, >>>>>>> but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that >>>>>> he is correct. I have seen detailed descriptions of things that,
despite the originator's conviction, proved to be completely
wrong. The best that you can say is that it is one possible
explanation.
noddy suggested..
(A) It broke a valve spring.
That would have been still in the engine.
(B) it suffered a collet failure that caused the valve to drop.
That would have still been in the engine.
your point is?
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
Unlikely, the engine wasn't new. If it had the valve would have been
popped fully open, then stuck. That would have left a different
trail of destruction and, likely, the valve head would not have
parted company with the stem - just bent the stem. When they part at
the fillet like that one did, you're looking at heat related events.
More speculation from someone who has never been within 100's of km of
that engine.
On 21/11/2026 2:03 pm, Xeno wrote:
Totally misread. In any case the collets would be somewhere in the
On 21/11/2026 1:09 pm, Keithr0 wrote:
On 21/11/2026 6:09 am, Rod Speed wrote:
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, >>>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>>> what had been done (and not done) to the engine, the location >>>>>>>>>> where it failed and what it was doing at the time, all as >>>>>>>>>> reported by Daryl and Darren. I showed the hottest part of the >>>>>>>>>> valve (base of fillet) where I said it would part company. Lo >>>>>>>>>> and behold, that's where the valve head parted company with >>>>>>>>>> the stem. I described, with links, valve operation - including >>>>>>>>>> lofting, overshoot, bounce and the rest. I laid the blame at a >>>>>>>>>> couple of clowns who didn't compensate for a thinner head >>>>>>>>>> gasket. Such compensation could have included a different cam >>>>>>>>>> profile, lighter valves or stronger valves springs. No counter >>>>>>>>>> measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good >>>>>>>>>> reason. Reduce that clearance by any significant amount and >>>>>>>>>> the engine will fail at extremes of operation - like on conrod >>>>>>>>>> straight at Bathurst, a run well known for stretching con rods >>>>>>>>>> on the big V8s of the heyday. FFS, the A- GE(20) was already a >>>>>>>>>> highly strung little performance engine from the get go so you >>>>>>>>>> don't dick with it without knowing what you're doing. And >>>>>>>>>> Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the
fillet. That is a textbook valve overheat separation.
Backtrack from there to the circumstances where and when it >>>>>>>>>> failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in >>>>>>>> many posts. there's no question the valve impacted the piston, >>>>>>>> only the cause is in doubt. Xeno seems sure what that cause is, >>>>>>>> but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that >>>>>>> he is correct. I have seen detailed descriptions of things that, >>>>>>> despite the originator's conviction, proved to be completely
wrong. The best that you can say is that it is one possible
explanation.
There is no other explanation coming from the dumb and dumber
crew. Well, they did try to blame it all on a faulty valve - a
copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
The broken valve spring would have been visible and wasn't
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed. The
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
rocker box, there would be no evidence as to whether they were the cause
of the problem or not.
On 21/11/2026 2:31 pm, Rod Speed wrote:
Keithr0 <nothing.to.see@here.com.au> wrote
Rod Speed wrote
On Fri, 20 Nov 2026 22:17:18 +1100, Axel <none@not.here> wrote:
Xeno wrote:˙The broken valve spring would have been visible and wasn't
On 20/11/2026 6:43 pm, Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, >>>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>>> what had been done (and not done) to the engine, the location >>>>>>>>>> where it failed and what it was doing at the time, all as >>>>>>>>>> reported by Daryl and Darren. I showed the hottest part of the >>>>>>>>>> valve (base of fillet) where I said it would part company. Lo >>>>>>>>>> and behold, that's where the valve head parted company with >>>>>>>>>> the stem. I described, with links, valve operation - including >>>>>>>>>> lofting, overshoot, bounce and the rest. I laid the blame at a >>>>>>>>>> couple of clowns who didn't compensate for a thinner head >>>>>>>>>> gasket. Such compensation could have included a different cam >>>>>>>>>> profile, lighter valves or stronger valves springs. No counter >>>>>>>>>> measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good >>>>>>>>>> reason. Reduce that clearance by any significant amount and >>>>>>>>>> the engine will fail at extremes of operation - like on conrod >>>>>>>>>> straight at Bathurst, a run well known for stretching con rods >>>>>>>>>> on the big V8s of the heyday. FFS, the A- GE(20) was already a >>>>>>>>>> highly strung little performance engine from the get go so you >>>>>>>>>> don't dick with it without knowing what you're doing. And >>>>>>>>>> Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the
fillet. That is a textbook valve overheat separation.
Backtrack from there to the circumstances where and when it >>>>>>>>>> failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in >>>>>>>> many posts. there's no question the valve impacted the piston, >>>>>>>> only the cause is in doubt. Xeno seems sure what that cause is, >>>>>>>> but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that >>>>>>> he is correct. I have seen detailed descriptions of things that, >>>>>>> despite the originator's conviction, proved to be completely
wrong. The best that you can say is that it is one possible
explanation.
There is no other explanation coming from the dumb and dumber
crew. Well, they did try to blame it all on a faulty valve - a
copout!
why couldn't it have been any of the reasons noddy suggested..
(A) It broke a valve spring.
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
Complete ignorant bullshit with the collet itself
and the it is easy to determine why the head
separated from the valve stem by metalurgy
There has been no metalurgy, only assumptions as to the cause.
On 21/11/2026 1:24 pm, Axel wrote:
Keithr0 wrote:Your blind faith in your mentor is noted.
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I
don't need to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing >>>>>> with him :)
his time, he even stated "only the cause is in doubt" but then
goes on to
I have absolutely no doubt as to the cause. You and Darren have no
clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
yes. and there's one here, and his moniker is noddy!
On 21/11/2026 2:04 pm, Xeno wrote:
On 21/11/2026 1:13 pm, Keithr0 wrote:
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause >>>>>>> is in doubt. Xeno seems sure what that cause is, but I don't need >>>>>>> to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing >>>>>> with him :)
his time, he even stated "only the cause is in doubt" but then goes >>>>> on to
I have absolutely no doubt as to the cause. You and Darren have no
clue!
blind faith in your own interpretation is a sign of a closed mind. I
My interpretation comes from *experience* in the trade.
So you have significant experience of diagnosing valve failures in
racing engines that occurred while being driven to the limit?
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
endorse what Xeno says when its obvious he doesn't understand any
of it himself so why bother to reply at all.
On 20/11/2026 10:53 pm, Xeno wrote:~~~~~~~~~~~~~~~~~~~~~
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in his
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept >>>>>> xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause
is in doubt. Xeno seems sure what that cause is, but I don't need
to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
time, he even stated "only the cause is in doubt" but then goes on to
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
endorse what Xeno says when its obvious he doesn't understand any of
it himself so why bother to reply at all.
On 21/11/2026 1:13 pm, Keithr0 wrote:~~~~~~~~~~~~~~~~~~~~~~~~~
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to accept >>>>>>> xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause >>>>>> is in doubt. Xeno seems sure what that cause is, but I don't need >>>>>> to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing
with him :)
his time, he even stated "only the cause is in doubt" but then goes
on to
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
My interpretation comes from *experience* in the trade.
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
endorse what Xeno says when its obvious he doesn't understand any of
it himself so why bother to reply at all.
On 21/11/2026 1:23 pm, Keithr0 wrote:
On 20/11/2026 9:52 pm, Xeno wrote:
On 20/11/2026 4:44 pm, Keithr0 wrote:
On 20/11/2026 12:57 am, Noddy wrote:
On 19/11/2026 10:24 pm, Daryl wrote:
On 19/11/2026 9:30 pm, Keithr0 wrote:
On 16/11/2026 5:39 pm, Xeno wrote:
Sorry to disappoint you Keith, I'm a mechanic,
Nope, you were once maybe, but, in your own words, you haven't
been for a very long time.
hydraulics and internal combustion engines, it's what we do.
Hydraulics would be a very minor part of an average mechanic's job. >>>>>>
True for most car mechanics unless we are talking about the most
basic like brake and clutch or auto transmissions.
There's not much in the way of hydraulics in automatic
transmissions that the average mechanic ever comes into contact
with. Most workshops are limited to fluid and filter changes, and
the only people who would ever see the inside of an auto trans
would be a rebuilder.
Interestingly, the unbreakable automatic gear box in my No.1
daughter's RAV4, broke, to the extent that, when the pan was
removed, all sorts of interesting bits of metal fell out.
No such a thing as unbreakable. You can make something foolproof but
fools are damnably ingenious.
It just let go in normal operation, suddenly no drive.
How old is it and how many kms?
On 21/11/2026 3:17 pm, Keithr0 wrote:
On 21/11/2026 3:08 pm, Daryl wrote:
On 21/11/2026 10:43 am, Keithr0 wrote:
On 20/11/2026 10:05 pm, Xeno wrote:
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little knowledge >>>>>>>>>>>>>>>>>> is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally fucked >>>>>>>>>>>>>>>>> right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, >>>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is
consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>>> what had been done (and not done) to the engine, the location >>>>>>>>>> where it failed and what it was doing at the time, all as >>>>>>>>>> reported by Daryl and Darren. I showed the hottest part of the >>>>>>>>>> valve (base of fillet) where I said it would part company. Lo >>>>>>>>>> and behold, that's where the valve head parted company with >>>>>>>>>> the stem. I described, with links, valve operation - including >>>>>>>>>> lofting, overshoot, bounce and the rest. I laid the blame at a >>>>>>>>>> couple of clowns who didn't compensate for a thinner head >>>>>>>>>> gasket. Such compensation could have included a different cam >>>>>>>>>> profile, lighter valves or stronger valves springs. No counter >>>>>>>>>> measures were adopted and the engine failed exactly as
predicted. They have 0.100" clearance specs for a very good >>>>>>>>>> reason. Reduce that clearance by any significant amount and >>>>>>>>>> the engine will fail at extremes of operation - like on conrod >>>>>>>>>> straight at Bathurst, a run well known for stretching con rods >>>>>>>>>> on the big V8s of the heyday. FFS, the A- GE(20) was already a >>>>>>>>>> highly strung little performance engine from the get go so you >>>>>>>>>> don't dick with it without knowing what you're doing. And >>>>>>>>>> Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the
fillet. That is a textbook valve overheat separation.
Backtrack from there to the circumstances where and when it >>>>>>>>>> failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in >>>>>>>> many posts. there's no question the valve impacted the piston, >>>>>>>> only the cause is in doubt. Xeno seems sure what that cause is, >>>>>>>> but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee that >>>>>>> he is correct. I have seen detailed descriptions of things that, >>>>>>> despite the originator's conviction, proved to be completely
wrong. The best that you can say is that it is one possible
explanation.
noddy suggested..
(A) It broke a valve spring.
That would have been still in the engine.
(B) it suffered a collet failure that caused the valve to drop.
That would have still been in the engine.
your point is?
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
When the head drops off the valve, the tension drops off the spring, it
ends up inside the engine cam cover but the collets not necessarily on
the valve. Regardless, they can be inspected and, thus far, no mention
of them being a cause of failure, just a trite comment from Darren
claiming a faulty valve. So, dismiss collett, dismiss broken spring,
dismiss stuck valve stem. Also, dismiss any future pics since they will likely be *staged* therefore fake.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
Unlikely, the engine wasn't new. If it had the valve would have
been popped fully open, then stuck. That would have left a
different trail of destruction and, likely, the valve head would
not have parted company with the stem - just bent the stem. When
they part at the fillet like that one did, you're looking at heat
related events.
More speculation from someone who has never been within 100's of km
of that engine.
Daryl wrote:
Felix replies simply because he has nothing else to do to fill in his
time, he even stated "only the cause is in doubt" but then goes on to
endorse what Xeno says when its obvious he doesn't understand any of
it himself so why bother to reply at all.
been taking mind reading lessons from your bogan mate, I see
Noddy wrote:
On 20/11/2026 10:25 pm, Daryl wrote:
On 20/11/2026 9:09 pm, Noddy wrote:
On 20/11/2026 2:14 pm, Axel wrote:Maybe Felix is an expert in the gobbledygook language or was it
but I understood everything Xeno wrote anyway. so noddy was wrong,
again
Like fuck you did Felix. Half the shit he claimed he invented
himself :)
Klingon, makes about the same amount of sense.
Felix is the perfect sock puppet for the mental case. He's dumber than
dogshit,
you lie
and swallows every bit of waffling crap
you lie again
that the mental maggot throws at him because it sounds impressive.
He has no fucking idea.
three strikes, yer out!
On 21/11/2026 2:04 pm, Xeno wrote:
On 21/11/2026 1:13 pm, Keithr0 wrote:
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the
point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns
technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the cause >>>>>>> is in doubt. Xeno seems sure what that cause is, but I don't need >>>>>>> to make any decision about it.
Just as well, as your mental mate has no idea what he's talking
about, and you most definitely don't want to be seen not agreeing >>>>>> with him :)
his time, he even stated "only the cause is in doubt" but then goes >>>>> on to
I have absolutely no doubt as to the cause. You and Darren have no
clue!
blind faith in your own interpretation is a sign of a closed mind. I
My interpretation comes from *experience* in the trade.
So you have significant experience of diagnosing valve failures in
racing engines that occurred while being driven to the limit?
On 21/11/2026 10:43 am, Keithr0 wrote:
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
Unlikely, the engine wasn't new. If it had the valve would have been
popped fully open, then stuck. That would have left a different trail
of destruction and, likely, the valve head would not have parted
company with the stem - just bent the stem. When they part at the
fillet like that one did, you're looking at heat related events.
More speculation from someone who has never been within 100's of km of
that engine.
On 21/11/2026 3:08 pm, Daryl wrote:
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
On 21/11/2026 3:29 pm, Xeno wrote:
Xeno's root cause analysis:-
Q:˙˙˙˙˙˙˙ Did noddy touch it?
analysis: Therefor it's his fault.
On 21/11/2026 3:29 pm, Xeno wrote:
On 21/11/2026 3:17 pm, Keithr0 wrote:
On 21/11/2026 3:08 pm, Daryl wrote:
On 21/11/2026 10:43 am, Keithr0 wrote:
On 20/11/2026 10:05 pm, Xeno wrote:
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little >>>>>>>>>>>>>>>>>>> knowledge is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally >>>>>>>>>>>>>>>>>> fucked right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, >>>>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was never >>>>>>>>>>>>>>>> otherwise) Who can prove my (and others) 'opinion' wrong?. >>>>>>>>>>>>>>>> ˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is >>>>>>>>>>>>> consistent with your claimed explanation and photo
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL>
So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>>>> didn't do one, you're not qualified to comment on cars, your >>>>>>>>>>>> leader xeno says so.
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>>>> what had been done (and not done) to the engine, the location >>>>>>>>>>> where it failed and what it was doing at the time, all as >>>>>>>>>>> reported by Daryl and Darren. I showed the hottest part of >>>>>>>>>>> the valve (base of fillet) where I said it would part
company. Lo and behold, that's where the valve head parted >>>>>>>>>>> company with the stem. I described, with links, valve
operation - including lofting, overshoot, bounce and the >>>>>>>>>>> rest. I laid the blame at a couple of clowns who didn't >>>>>>>>>>> compensate for a thinner head gasket. Such compensation could >>>>>>>>>>> have included a different cam profile, lighter valves or >>>>>>>>>>> stronger valves springs. No counter measures were adopted and >>>>>>>>>>> the engine failed exactly as predicted. They have 0.100" >>>>>>>>>>> clearance specs for a very good reason. Reduce that clearance >>>>>>>>>>> by any significant amount and the engine will fail at
extremes of operation - like on conrod straight at Bathurst, >>>>>>>>>>> a run well known for stretching con rods on the big V8s of >>>>>>>>>>> the heyday. FFS, the A- GE(20) was already a highly strung >>>>>>>>>>> little performance engine from the get go so you don't dick >>>>>>>>>>> with it without knowing what you're doing. And Darren and >>>>>>>>>>> Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the >>>>>>>>>>> fillet. That is a textbook valve overheat separation.
Backtrack from there to the circumstances where and when it >>>>>>>>>>> failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to >>>>>>>>>> accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length in >>>>>>>>> many posts. there's no question the valve impacted the piston, >>>>>>>>> only the cause is in doubt. Xeno seems sure what that cause is, >>>>>>>>> but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee
that he is correct. I have seen detailed descriptions of things >>>>>>>> that, despite the originator's conviction, proved to be
completely wrong. The best that you can say is that it is one >>>>>>>> possible explanation.
noddy suggested..
(A) It broke a valve spring.
That would have been still in the engine.
(B) it suffered a collet failure that caused the valve to drop.
That would have still been in the engine.
your point is?
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
When the head drops off the valve, the tension drops off the spring,
it ends up inside the engine cam cover but the collets not necessarily
on the valve. Regardless, they can be inspected and, thus far, no
mention of them being a cause of failure, just a trite comment from
Darren claiming a faulty valve. So, dismiss collett, dismiss broken
spring, dismiss stuck valve stem. Also, dismiss any future pics since
they will likely be *staged* therefore fake.
(C) The valve guide clearance was a tad on the tight side and it >>>>>>> grabbed.
Unlikely, the engine wasn't new. If it had the valve would have
been popped fully open, then stuck. That would have left a
different trail of destruction and, likely, the valve head would
not have parted company with the stem - just bent the stem. When
they part at the fillet like that one did, you're looking at heat >>>>>> related events.
More speculation from someone who has never been within 100's of km
of that engine.
Xeno's root cause analysis:-
Q:˙˙˙˙˙˙˙ Did noddy touch it?
analysis: Therefor it's his fault.
On 21/11/2026 3:17 pm, Keithr0 wrote:
On 21/11/2026 3:08 pm, Daryl wrote:
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
I didn't dismantle the engine so never got to see what the rest of it
was like. Had I done so I could have made a more accurate diagnosis of
what went wrong. I don't know if Daryl can remember, but I think he
pulled the engine down and could tell you if it had a broken valve spring.
More speculation from someone who has never been within 100's of km
of that engine.
Xeno's root cause analysis:-
Q:˙˙˙˙˙˙˙ Did noddy touch it?
analysis: Therefor it's his fault.
On 21/11/2026 3:25 pm, Keithr0 wrote:
On 21/11/2026 2:04 pm, Xeno wrote:
On 21/11/2026 1:13 pm, Keithr0 wrote:
On 20/11/2026 10:53 pm, Xeno wrote:
On 20/11/2026 10:21 pm, Daryl wrote:
On 20/11/2026 9:00 pm, Noddy wrote:
On 20/11/2026 6:14 pm, Axel wrote:Felix replies simply because he has nothing else to do to fill in >>>>>> his time, he even stated "only the cause is in doubt" but then
Keithr0 wrote:
So, having no knowledge of the subject, you are willing to
accept xeno's explanation without question?
what do you mean no knowledge?
He means you have no knowledge of cause and effect. Your
understanding of the subject matter is extremely limited, to the >>>>>>> point where you have no idea if the stuff your mental mate has
regurgitated is accurate or just his usual waffling bullshit.
it's been discussed at length in many posts.
And as you like to remind everyone, when the conversation turns >>>>>>> technical you tune out.
Or have you forgotten all about that?
there's no question the valve impacted the piston, only the
cause is in doubt. Xeno seems sure what that cause is, but I
don't need to make any decision about it.
Just as well, as your mental mate has no idea what he's talking >>>>>>> about, and you most definitely don't want to be seen not agreeing >>>>>>> with him :)
goes on to
I have absolutely no doubt as to the cause. You and Darren have no
clue!
blind faith in your own interpretation is a sign of a closed mind. I
My interpretation comes from *experience* in the trade.
So you have significant experience of diagnosing valve failures in
racing engines that occurred while being driven to the limit?
LOL, his last "experience in the trade" was no where near a race car
fitted with a 4AGE.
On 21/11/2026 3:08 pm, Daryl wrote:I made the point, in the case of a tight guide, the valve will stick
On 21/11/2026 10:43 am, Keithr0 wrote:
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
Unlikely, the engine wasn't new. If it had the valve would have been
popped fully open, then stuck. That would have left a different
trail of destruction and, likely, the valve head would not have
parted company with the stem - just bent the stem. When they part at
the fillet like that one did, you're looking at heat related events.
More speculation from someone who has never been within 100's of km of
that engine.
He has no fucking idea. The cylinder head had just been reconditioned :)
On 21/11/2026 3:17 pm, Keithr0 wrote:
On 21/11/2026 3:08 pm, Daryl wrote:
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
I didn't dismantle the engine so never got to see what the rest of it
was like. Had I done so I could have made a more accurate diagnosis of
what went wrong. I don't know if Daryl can remember, but I think he
pulled the engine down and could tell you if it had a broken valve spring.
On 21/11/2026 4:33 pm, Keithr0 wrote:
On 21/11/2026 3:29 pm, Xeno wrote:
Xeno's root cause analysis:-
Q:˙˙˙˙˙˙˙ Did noddy touch it?
analysis: Therefor it's his fault.
Lol :)
The engine is/was a bucket and shim design, with the valve spring, cap
and collets all located and retained under their respective bucket. As I said in another post I didn't get to pull the engine down after the
event so I have no idea how badly damaged everything was "up top".
However I do remain in awe of the ability of someone who hasn't even
*seen* one of these engines in the flesh to accurately diagnose a catastrophic failure without knowing anything about it other than what
he saw in a couple of pictures.
I mean, the man has a special skill. He should be earning millions
working for NASA as the world's pre eminent failure analysis specialist :)
On 21/11/2026 4:33 pm, Keithr0 wrote:
On 21/11/2026 3:29 pm, Xeno wrote:
On 21/11/2026 3:17 pm, Keithr0 wrote:
On 21/11/2026 3:08 pm, Daryl wrote:
On 21/11/2026 10:43 am, Keithr0 wrote:
On 20/11/2026 10:05 pm, Xeno wrote:
On 20/11/2026 8:08 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 6:14 pm, Axel wrote:
Keithr0 wrote:
On 20/11/2026 12:03 am, Axel wrote:
Keithr0 wrote:
On 18/11/2026 6:51 pm, Axel wrote:
Noddy wrote:So, when did you do your mechanic's apprenticeship? If you >>>>>>>>>>>>> didn't do one, you're not qualified to comment on cars, >>>>>>>>>>>>> your leader xeno says so.
On 18/11/2026 12:08 pm, Axel wrote:
jonz wrote:
On 17-Nov-26 8:05 PM, Daryl wrote:
On 17/11/2026 5:19 pm, lindsay wrote:
On 17/11/2026 3:07 pm, Xeno wrote:Especially when it comes to the engine he keeps going >>>>>>>>>>>>>>>>>> back to, he has zero idea what he's talking about. >>>>>>>>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~
Remember Les' engine and the adage, a little >>>>>>>>>>>>>>>>>>>> knowledge is a dangerous thing.
Hmmm, "a little knowledge..."˙ thats you royally >>>>>>>>>>>>>>>>>>> fucked right there, shit-fer-brains.
Yes indeed, Ive followed this debacle˙ from the get-go, >>>>>>>>>>>>>>>>> and krypsis' argument is dead in the water!!. (Was >>>>>>>>>>>>>>>>> never otherwise) Who can prove my (and others) >>>>>>>>>>>>>>>>> 'opinion' wrong?.
˙ *Go for it*. ???
you need to prove that what Xeno said is wrong
Which version Felix?
overheating of the valve stem causing it to break is >>>>>>>>>>>>>> consistent with your claimed explanation and photo >>>>>>>>>>>>>>
˙˙˙ https://ibb.co/cwxR1yL <https://ibb.co/cwxR1yL> >>>>>>>>>>>>>
I'm just stating the reason Xeno gave, viz.
"I laid out a clear step by step failure mode incorporating >>>>>>>>>>>> what had been done (and not done) to the engine, the
location where it failed and what it was doing at the time, >>>>>>>>>>>> all as reported by Daryl and Darren. I showed the hottest >>>>>>>>>>>> part of the valve (base of fillet) where I said it would >>>>>>>>>>>> part company. Lo and behold, that's where the valve head >>>>>>>>>>>> parted company with the stem. I described, with links, valve >>>>>>>>>>>> operation - including lofting, overshoot, bounce and the >>>>>>>>>>>> rest. I laid the blame at a couple of clowns who didn't >>>>>>>>>>>> compensate for a thinner head gasket. Such compensation >>>>>>>>>>>> could have included a different cam profile, lighter valves >>>>>>>>>>>> or stronger valves springs. No counter measures were adopted >>>>>>>>>>>> and the engine failed exactly as predicted. They have 0.100" >>>>>>>>>>>> clearance specs for a very good reason. Reduce that
clearance by any significant amount and the engine will fail >>>>>>>>>>>> at extremes of operation - like on conrod straight at >>>>>>>>>>>> Bathurst, a run well known for stretching con rods on the >>>>>>>>>>>> big V8s of the heyday. FFS, the A- GE(20) was already a >>>>>>>>>>>> highly strung little performance engine from the get go so >>>>>>>>>>>> you don't dick with it without knowing what you're doing. >>>>>>>>>>>> And Darren and Daryl certainly didn't. "
and..
"Yup, there it is, gone - right at the lower end of the >>>>>>>>>>>> fillet. That is a textbook valve overheat separation. >>>>>>>>>>>> Backtrack from there to the circumstances where and when it >>>>>>>>>>>> failed and it become crystal clear. "
So, having no knowledge of the subject, you are willing to >>>>>>>>>>> accept xeno's explanation without question?
what do you mean no knowledge? it's been discussed at length >>>>>>>>>> in many posts. there's no question the valve impacted the >>>>>>>>>> piston, only the cause is in doubt. Xeno seems sure what that >>>>>>>>>> cause is, but I don't need to make any decision about it.
The fact that xeno has made an explanation doesn't guarantee >>>>>>>>> that he is correct. I have seen detailed descriptions of things >>>>>>>>> that, despite the originator's conviction, proved to be
completely wrong. The best that you can say is that it is one >>>>>>>>> possible explanation.
noddy suggested..
(A) It broke a valve spring.
That would have been still in the engine.
(B) it suffered a collet failure that caused the valve to drop. >>>>>>>That would have still been in the engine.
your point is?
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
When the head drops off the valve, the tension drops off the spring,
it ends up inside the engine cam cover but the collets not
necessarily on the valve. Regardless, they can be inspected and, thus
far, no mention of them being a cause of failure, just a trite
comment from Darren claiming a faulty valve. So, dismiss collett,
dismiss broken spring, dismiss stuck valve stem. Also, dismiss any
future pics since they will likely be *staged* therefore fake.
(C) The valve guide clearance was a tad on the tight side and it >>>>>>>> grabbed.
Unlikely, the engine wasn't new. If it had the valve would have >>>>>>> been popped fully open, then stuck. That would have left a
different trail of destruction and, likely, the valve head would >>>>>>> not have parted company with the stem - just bent the stem. When >>>>>>> they part at the fillet like that one did, you're looking at heat >>>>>>> related events.
More speculation from someone who has never been within 100's of km >>>>> of that engine.
Xeno's root cause analysis:-
Q:˙˙˙˙˙˙˙ Did noddy touch it?
analysis: Therefor it's his fault.
Yes, how childish and a demonstration of his severe OCD.
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.And you're not willing to consider any other cause.
Well, they did try to blame it all on a faulty valve - a copout!
On 21/11/2026 6:09 am, Rod Speed wrote:
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.And you're not willing to consider any other cause.
Well, they did try to blame it all on a faulty valve - a copout!
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself in
the process, he has yet to manage that.
But he *still* keeps bringing it up as if it's been some kind of victory
for him. Such is the state of his mind.....
Xeno wrote:
A collet failure would leave no evidence.
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed. The
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the fillet?
https://www.researchgate.net/figure/Nomenclature-of-Poppet-valve_fig1_336196843
https://ibb.co/cwxR1yL
https://ibb.co/cKf11FhF
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber. It's
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed.
The fact that the valve separated at the hot point tends to negate
collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the
fillet?
one Darren posted early on. And reposted it too.
Oh yes it does show that
On 21/11/2026 2:03 pm, Xeno wrote:
Rubbish! The collets would remain in or near the valve keeper. TheirTotally misread. In any case the collets would be somewhere in the
absence could be observed easily with the cam and bucket removed. The
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
rocker box, there would be no evidence as to whether they were the cause
of the problem or not.
On 21/11/2026 2:31 pm, Rod Speed wrote:
Complete ignorant bullshit with the collet itself
and the it is easy to determine why the head
separated from the valve stem by metalurgy
There has been no metalurgy, only assumptions as to the cause.
On 20/11/2026 10:53 pm, Xeno wrote:
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
Keithr0 wrote:
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
yes. and there's one here, and his moniker is noddy!
On 21/11/2026 1:09 pm, Keithr0 wrote:
On 21/11/2026 6:09 am, Rod Speed wrote:
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
Most likely.
The head had been reconditioned by Les's cylinder head people and was delivered to me fully assembled with all new guides and new exhaust
valves. My job was to assemble the short motor, do some minor work such
as modify the oil pickup to suit a low profile sump and modify a windage tray to suit the pickup, and install the head, time the cams and set the valve clearances. Basically put it all together, put it in the car and
get it running which I did. Testing and tuning was handled by Les and
Daryl in the subsequent weeks.
My understanding is that the exhaust valves were custom made from semi finished blanks which usually involves cutting the stem to the correct length and machining new collet grooves to suit, and it was one of those valves that failed.
As to exactly why it failed I cannot tell you as I didn't dismantle the
engine. Les called me on his way home from Bathurst after the meetingOf course not! The valve wasn't faulty, it had insufficient clearance
and described what happened and asked if I could take a look, and I told
him to swing past and we could have a look. When he arrived I stuck a borescope down the plughole and gave him the bad news that there had
been a catastrophic failure and that the engine was fucked.
With that he took the car home and played around with it himself, and
took the pieces back to his head people to show them. I don't expect
they ever did much.
Keithr0 wrote:
Your blind faith in your mentor is noted.
your stupidity has been noted many times. my observation about noddy, nothing to do with anyone else.
On 21/11/2026 12:57 pm, Axel wrote:
Daryl wrote:
Felix replies simply because he has nothing else to do to fill in his
time, he even stated "only the cause is in doubt" but then goes on to
endorse what Xeno says when its obvious he doesn't understand any of
it himself so why bother to reply at all.
been taking mind reading lessons from your bogan mate, I see
No one needs to do anything other than observe your actions, Felix. They
are obvious, and predictable.
On 21/11/2026 2:04 pm, Xeno wrote:
My interpretation comes from *experience* in the trade.
So you have significant experience of diagnosing valve failures in
racing engines that occurred while being driven to the limit?
On 21/11/2026 3:25 pm, Keithr0 wrote:
My interpretation comes from *experience* in the trade.
So you have significant experience of diagnosing valve failures in
racing engines that occurred while being driven to the limit?
LOL, his last "experience in the trade" was no where near a race car
fitted with a 4AGE.
On 21-Nov-26 2:04 PM, Xeno wrote:Must have been all that "experience" he gained working on dump trucks.
~~~~~~~~~~~~~~~~~~~~~~~~~
My interpretation comes from *experience* in the trade.
˙Virtually, a *Couple of years*...
On 21/11/2026 1:13 pm, Keithr0 wrote:
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
Funny how I didn't notice Felix in the workshop or the hidden camera
looking over my shoulder when I was dismantling the engine, he should
change his name from Felix to Casper since he is as invisible as a ghost.
On 21-Nov-26 1:13 PM, Keithr0 wrote:
~~~~~~~~~~~~~~~~~~~~~I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
Personly, I can`t imagine this silly old coat-tailer being a productive member of *ANY* team....
On 21/11/2026 3:20 pm, Keithr0 wrote:
On 21/11/2026 2:03 pm, Xeno wrote:
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed. TheTotally misread. In any case the collets would be somewhere in the
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
rocker box, there would be no evidence as to whether they were the
cause of the problem or not.
No there would not, and this mental moron displays a lack of any kind of experience every time he posts. "Collets" and "keepers" are the same
thing, and claiming that the "collets would remain in or near the valve keeper" makes zero sense.
On 21/11/2026 1:13 pm, Keithr0 wrote:The engine was your handiwork Darren, the egg's on your face!
On 20/11/2026 10:53 pm, Xeno wrote:
I have absolutely no doubt as to the cause. You and Darren have no clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
In his defence it's not his fault. He's so hell bent on blaming me for
it that he has no idea what he's saying and is prepared to make himself
look insanely clueless if he thinks it will work.
It's just a shame for him that the only person who has come away from
this bullshit with egg on their face is him :)
On 21/11/2026 5:58 pm, Daryl wrote:TAFE classes a mixed theory and prac Darren. Just keep on proving you've
On 21/11/2026 3:25 pm, Keithr0 wrote:
My interpretation comes from *experience* in the trade.
So you have significant experience of diagnosing valve failures in
racing engines that occurred while being driven to the limit?
LOL, his last "experience in the trade" was no where near a race car
fitted with a 4AGE.
His last "experience in the trade" was 30 years ago, and that involved teaching out of date theory to a bunch of uninterested kids :)
On 21/11/2026 3:25 pm, Keithr0 wrote:
On 21/11/2026 2:04 pm, Xeno wrote:
My interpretation comes from *experience* in the trade.
So you have significant experience of diagnosing valve failures in
racing engines that occurred while being driven to the limit?
You already know the answer to that question, but I shouldn't worry.
He'll be inventing some as we speak, and if this conversation goes on
for a few more days by the time it reaches the end he'll have talked his
way into being chief engine builder for the Holden Dealer Team :)
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.And you're not willing to consider any other cause.
Well, they did try to blame it all on a faulty valve - a copout!
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
But he *still* keeps bringing it up as if it's been some kind of
victory for him. Such is the state of his mind.....
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber. It's
Rubbish! The collets would remain in or near the valve keeper.
Their absence could be observed easily with the cam and bucket
removed. The fact that the valve separated at the hot point tends
to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the
fillet?
one Darren posted early on. And reposted it too.
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber.
Rubbish! The collets would remain in or near the valve keeper.
Their absence could be observed easily with the cam and bucket
removed. The fact that the valve separated at the hot point tends
to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the
fillet?
It's one Darren posted early on. And reposted it too.
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
Noddy wrote:
On 21/11/2026 12:57 pm, Axel wrote:
Daryl wrote:
Felix replies simply because he has nothing else to do to fill in
his time, he even stated "only the cause is in doubt" but then goes
on to endorse what Xeno says when its obvious he doesn't understand
any of it himself so why bother to reply at all.
been taking mind reading lessons from your bogan mate, I see
No one needs to do anything other than observe your actions, Felix.
They are obvious, and predictable.
Sooo Fraudster, you keep abusing and denigrating felix because...
well, afaics, he doesn't always agree with you. You, otoh, are
attacked with the facts that you faked being a profitable business
owner, lied about a shedload of things, are a truly massive hypocrite
and you are the most spineless coward I've ever seen on usenet. If you
two had a race you'd be the one stiffening in a Sydney dumpster
Fraudster.
hth
On 21/11/2026 3:20 pm, Keithr0 wrote:
On 21/11/2026 2:03 pm, Xeno wrote:
Rubbish! The collets would remain in or near the valve keeper. TheirTotally misread. In any case the collets would be somewhere in the
absence could be observed easily with the cam and bucket removed. The
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
rocker box, there would be no evidence as to whether they were the
cause of the problem or not.
No there would not, and this mental moron displays a lack of any kind of experience every time he posts.
On 21/11/2026 10:16 pm, Noddy wrote:
On 21/11/2026 1:13 pm, Keithr0 wrote:The engine was your handiwork Darren, the egg's on your face!
On 20/11/2026 10:53 pm, Xeno wrote:
I have absolutely no doubt as to the cause. You and Darren have no
clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
In his defence it's not his fault. He's so hell bent on blaming me
for it that he has no idea what he's saying and is prepared to make
himself look insanely clueless if he thinks it will work.
It's just a shame for him that the only person who has come away from
this bullshit with egg on their face is him :)
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.And you're not willing to consider any other cause.
Well, they did try to blame it all on a faulty valve - a copout!
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself in
the process, he has yet to manage that.
But he *still* keeps bringing it up as if it's been some kind of victory
for him. Such is the state of his mind.....
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:
A collet failure would leave no evidence.
Rubbish! The collets would remain in or near the valve keeper. Their
absence could be observed easily with the cam and bucket removed. The
fact that the valve separated at the hot point tends to negate collet
issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the
fillet?
There *isn't* any evidence of the valve separated at the fillet Felix,
and in fact the photos show that as *not* having been the case.
Take a look at this diagram here. It shows the basic anatomy of an
engine "poppet" valve:
https://www.researchgate.net/figure/Nomenclature-of-Poppet-
valve_fig1_336196843
If you look at the diagram, you'll see that the "fillet" is the area
between the valve face and the base of the valve stem. What you can see
in the photo:
https://ibb.co/cwxR1yL
... is the fillet area intact. What you *can't* see in the photo is the additional half inch or so of valve stem that was still attached and
punched up into the port pocket.
An important point to bear in mind here Felix is that this engine had a history of valve issues, and this was the sight I was presented with
when the engine came to me to begin with:
https://ibb.co/cKf11FhF
This happened long before I ever had anything to do with it :)
On 21/11/2026 3:53 pm, jonz wrote:
On 21-Nov-26 2:04 PM, Xeno wrote:
Must have been all that "experience" he gained working on dump trucks.~~~~~~~~~~~~~~~~~~~~~~~~~
My interpretation comes from *experience* in the trade.
˙˙Virtually, a *Couple of years*...
What was it? 8 jobs in 6 years?
He would have been lucky to have stayed at any one place long enough to
get to know the names of the people he worked with :)
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.And you're not willing to consider any other cause.
Well, they did try to blame it all on a faulty valve - a copout!
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
But he *still* keeps bringing it up as if it's been some kind of
victory for him. Such is the state of his mind.....
Xeno wrote:
On 21/11/2026 10:16 pm, Noddy wrote:
On 21/11/2026 1:13 pm, Keithr0 wrote:The engine was your handiwork Darren, the egg's on your face!
On 20/11/2026 10:53 pm, Xeno wrote:
I have absolutely no doubt as to the cause. You and Darren have no
clue!
blind faith in your own interpretation is a sign of a closed mind. I
have come across people like you who's minds were closed to anything
other than their own ideas, they were a liability to the team.
In his defence it's not his fault. He's so hell bent on blaming me
for it that he has no idea what he's saying and is prepared to make
himself look insanely clueless if he thinks it will work.
It's just a shame for him that the only person who has come away from
this bullshit with egg on their face is him :)
he built the engine, but the head was supplied fully assembled. maybe he should have asked questions about it's suitability for purpose?
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.And you're not willing to consider any other cause.
Well, they did try to blame it all on a faulty valve - a copout!
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
But he *still* keeps bringing it up as if it's been some kind of
victory for him. Such is the state of his mind.....
Said the hypocritical buffoon who routinely resurrects historical trivia
in doomed attempts to avoid another pummelling. eg. Laminated glass, incorrect purchase of engine oil...
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.And you're not willing to consider any other cause.
Well, they did try to blame it all on a faulty valve - a copout!
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
Noddy wrote:
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
stop talking to me. fuck off and myob
Xeno wrote:
he built the engine, but the head was supplied fully assembled. maybe he should have asked questions about it's suitability for purpose?
alvey wrote:
Sooo Fraudster, you keep abusing and denigrating felix because...
he's just an arsehole
On 21/11/2026 10:57 pm, Axel wrote:
alvey wrote:
Sooo Fraudster, you keep abusing and denigrating felix because...
he's just an arsehole
Whatsa matta, Felix? You like dishing it out when it suits you, but
turn into a whinging little squib when you get it back.
How sad :)
On 21/11/2026 10:57 pm, Axel wrote:
alvey wrote:
Sooo Fraudster, you keep abusing and denigrating felix because...
he's just an arsehole
Whatsa matta, Felix? You like dishing it out when it suits you, but turn into a whinging little squib when you get it back.
You like dishing it out when it suits you, but turn
into a whinging little squib when you get it back.
How sad :)It is truly sad how I occupy your thoughts into the wee small hours!
On 21/11/2026 10:54 pm, Axel wrote:
Noddy wrote:
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
stop talking to me. fuck off and myob
Just to throw your own shit back at you, this is a free and open public forum where I can talk to whoever I like.
So go fuck yourself :)You did that to yourself when you came in here spouting all the bullshit
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew. >>>>> Well, they did try to blame it all on a faulty valve - a copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
ROTFL :)
Felix, if you didn't have your head so far up his arse you'd see that
over the course of fuck only knows how long he's been going on with this utter nonsense he's come up with 7 or 8 totally ridiculous explanations
that he's tried his level best to blame me for, and if you weren't such
a clueless moron you'd realise that every single one of them without exception has been completely ridiculous.
What's more, there isn't an engine guy worth his salt on this earth that
could look at the pics presented here and do anything more than come upProjection Darren, it's not working.
with 3 or 4 *possible* explanations as to the cause of the failure. Certainly there is *no one* who could pinpoint the issue down to a fine point without having seen the engine first hand or be aware of the particulars at the time of the failure.
Only someone suffering from an *extreme* case of relevance deprivation
could ever do that :)
Noddy wrote:
On 21/11/2026 10:57 pm, Axel wrote:
alvey wrote:
Sooo Fraudster, you keep abusing and denigrating felix because...
he's just an arsehole
Whatsa matta, Felix? You like dishing it out when it suits you, but
turn into a whinging little squib when you get it back.
How sad :)
nope. just stating fact
Noddy wrote:
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber.
Rubbish! The collets would remain in or near the valve keeper.
Their absence could be observed easily with the cam and bucket
removed. The fact that the valve separated at the hot point tends >>>>>> to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the
fillet?
It's one Darren posted early on. And reposted it too.
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
I'm pretty sure that he knows what he's looking at..
On 21/11/2026 3:17 pm, Keithr0 wrote:
On 21/11/2026 3:08 pm, Daryl wrote:
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
I didn't dismantle the engine so never got to see what the rest of it
was like. Had I done so I could have made a more accurate diagnosis of
what went wrong. I don't know if Daryl can remember, but I think he
pulled the engine down and could tell you if it had a broken valve spring.
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew.And you're not willing to consider any other cause.
Well, they did try to blame it all on a faulty valve - a copout!
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
But he *still* keeps bringing it up as if it's been some kind of
victory for him. Such is the state of his mind.....
On 21/11/2026 4:33 pm, Keithr0 wrote:
On 21/11/2026 3:29 pm, Xeno wrote:
Xeno's root cause analysis:-
Q:˙˙˙˙˙˙˙ Did noddy touch it?
analysis: Therefor it's his fault.
Lol :)
The engine is/was a bucket and shim design, with the valve spring, cap
and collets all located and retained under their respective bucket. As I said in another post I didn't get to pull the engine down after the
event so I have no idea how badly damaged everything was "up top".
However I do remain in awe of the ability of someone who hasn't even
*seen* one of these engines in the flesh to accurately diagnose a catastrophic failure without knowing anything about it other than what
he saw in a couple of pictures.
I mean, the man has a special skill. He should be earning millions
working for NASA as the world's pre eminent failure analysis specialist :)
On 21/11/2026 1:09 pm, Keithr0 wrote:
On 21/11/2026 6:09 am, Rod Speed wrote:
(B) it suffered a collet failure that caused the valve to drop.
(C) The valve guide clearance was a tad on the tight side and it
grabbed.
A collet failure would leave no evidence.
Most likely.
The head had been reconditioned by Les's cylinder head people and was delivered to me fully assembled with all new guides and new exhaust
valves. My job was to assemble the short motor, do some minor work such
as modify the oil pickup to suit a low profile sump and modify a windage tray to suit the pickup, and install the head, time the cams and set the valve clearances. Basically put it all together, put it in the car and
get it running which I did. Testing and tuning was handled by Les and
Daryl in the subsequent weeks.
My understanding is that the exhaust valves were custom made from semi finished blanks which usually involves cutting the stem to the correct length and machining new collet grooves to suit, and it was one of those valves that failed.
As to exactly why it failed I cannot tell you as I didn't dismantle the engine. Les called me on his way home from Bathurst after the meeting
and described what happened and asked if I could take a look, and I told
him to swing past and we could have a look. When he arrived I stuck a borescope down the plughole and gave him the bad news that there had
been a catastrophic failure and that the engine was fucked.
With that he took the car home and played around with it himself, and
took the pieces back to his head people to show them. I don't expect
they ever did much.
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he actually done a motor mechanic or auto machining apprenticeship, he might well
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew. >>>>> Well, they did try to blame it all on a faulty valve - a copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
have a better understanding. But then, he was too stupid to even get
signed onto any apprenticeship - and definitely not an AME
apprenticeship. That was way way outta his league!
But he *still* keeps bringing it up as if it's been some kind of
victory for him. Such is the state of his mind.....
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew. >>>>> Well, they did try to blame it all on a faulty valve - a copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just conjecture.
On 21/11/2026 6:01 pm, Noddy wrote:
On 21/11/2026 3:17 pm, Keithr0 wrote:I did dismantle it but it was so long ago and so many other jobs done
On 21/11/2026 3:08 pm, Daryl wrote:
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
I didn't dismantle the engine so never got to see what the rest of it
was like. Had I done so I could have made a more accurate diagnosis of
what went wrong. I don't know if Daryl can remember, but I think he
pulled the engine down and could tell you if it had a broken valve
spring.
since that I can't remember simply because it doesn't matter enough to remember.
On 21/11/2026 9:50 pm, Noddy wrote:
As to exactly why it failed I cannot tell you as I didn't dismantleYour recollection of events is much better than mine:-)
the engine. Les called me on his way home from Bathurst after the
meeting and described what happened and asked if I could take a look,
and I told him to swing past and we could have a look. When he arrived
I stuck a borescope down the plughole and gave him the bad news that
there had been a catastrophic failure and that the engine was fucked.
With that he took the car home and played around with it himself, and
took the pieces back to his head people to show them. I don't expect
they ever did much.
What I do remember is after that failure he bought a stock SH engine
which we fitted to the car which he then sold and bought 2 other
Clubman's which he still has, both track only cars.
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he
might well have a better understanding. But then, he was too stupid to
even get signed onto any apprenticeship - and definitely not an AME
apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's engine
is pure conjecture, no matter how many words are written, or how much
shit is thrown (mainly by you), nobody here will ever know exactly what caused the problem. Anybody with sense would move on, but we all know
that you can't (or won't).
On 21/11/2026 10:50 pm, alvey wrote:
Noddy wrote:
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber.
Rubbish! The collets would remain in or near the valve keeper.
Their absence could be observed easily with the cam and bucket
removed. The fact that the valve separated at the hot point
tends to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near)
the fillet?
It's one Darren posted early on. And reposted it too.
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
I'm pretty sure that he knows what he's looking at..
I'm pretty sure that you have no idea whether or not he knows what
he's looking at..
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just conjecture.
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he
might well have a better understanding. But then, he was too stupid
to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on, but
we all know that you can't (or won't).
On 22/11/2026 2:21 am, Axel wrote:This is something you demonstrate amply every time you post. For
Noddy wrote:
On 21/11/2026 10:57 pm, Axel wrote:
alvey wrote:
Sooo Fraudster, you keep abusing and denigrating felix because...
he's just an arsehole
Whatsa matta, Felix? You like dishing it out when it suits you, but
turn into a whinging little squib when you get it back.
How sad :)
nope. just stating fact
Yet again you demonstrate a clear lack of understanding of what a "fact" actually is....
On 21/11/2026 6:01 pm, Noddy wrote:You don't remember purely because it has become *convenient* not to
On 21/11/2026 3:17 pm, Keithr0 wrote:I did dismantle it but it was so long ago and so many other jobs done
On 21/11/2026 3:08 pm, Daryl wrote:
Only he knows, both the spring and the collets were "still in the
engine" just not where they were supposed to be.
No matter what the cause, that would be the case.
I didn't dismantle the engine so never got to see what the rest of it
was like. Had I done so I could have made a more accurate diagnosis of
what went wrong. I don't know if Daryl can remember, but I think he
pulled the engine down and could tell you if it had a broken valve
spring.
since that I can't remember simply because it doesn't matter enough to remember.
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew. >>>>> Well, they did try to blame it all on a faulty valve - a copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just conjecture.
On 21/11/2026 6:06 pm, Noddy wrote:
On 21/11/2026 4:33 pm, Keithr0 wrote:LOL, summed up perfectly.
On 21/11/2026 3:29 pm, Xeno wrote:
Xeno's root cause analysis:-
Q:˙˙˙˙˙˙˙ Did noddy touch it?
analysis: Therefor it's his fault.
Lol :)
The engine is/was a bucket and shim design, with the valve spring, cap
and collets all located and retained under their respective bucket. As
I said in another post I didn't get to pull the engine down after the
event so I have no idea how badly damaged everything was "up top".
However I do remain in awe of the ability of someone who hasn't even
*seen* one of these engines in the flesh to accurately diagnose a
catastrophic failure without knowing anything about it other than what
he saw in a couple of pictures.
I mean, the man has a special skill. He should be earning millions
working for NASA as the world's pre eminent failure analysis
specialist :)
On 22/11/2026 11:10 am, Keithr0 wrote:Why am I not surprised that you, of all people, have no clue!
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just
conjecture.
"Conjecture"? Is that a new word for nonsensical bullshit?
Keithr0 wrote:
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
On 22/11/2026 11:16 am, Daryl wrote:
On 21/11/2026 9:50 pm, Noddy wrote:
As to exactly why it failed I cannot tell you as I didn't dismantleYour recollection of events is much better than mine:-)
the engine. Les called me on his way home from Bathurst after the
meeting and described what happened and asked if I could take a look,
and I told him to swing past and we could have a look. When he
arrived I stuck a borescope down the plughole and gave him the bad
news that there had been a catastrophic failure and that the engine
was fucked.
With that he took the car home and played around with it himself, and
took the pieces back to his head people to show them. I don't expect
they ever did much.
I can remember Les calling me a week or so later to say that it was a
valve that had failed, and he was the one who sent me the pics I posted
here. I can vaguely remember him saying that he followed up with his cylinder head people, but I can't remember if there was any resolution
there and I don't expect there would have been either. It was a
competition engine, and given that competition engines tend to be pushed very hard and have significant failure rates as a result, it's highly unlikely that the head people would have been willing to accept any responsibility.
What I do remember is after that failure he bought a stock SH engine
which we fitted to the car which he then sold and bought 2 other
Clubman's which he still has, both track only cars.
Keithr0 wrote:
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just
conjecture.
wrong.
Xeno has provided a detailed and reasoned explanation of what the
cause was and why. your bias is showing (again).
On 22/11/2026 11:16 am, Keithr0 wrote:The interesting point of note here is that no one has provided a viable alternative.
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he
might well have a better understanding. But then, he was too stupid
to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on, but
we all know that you can't (or won't).
The interesting thing to observe here is that the only people who seem
to buy his bullshit are Felix and Jerky :)
Keithr0 wrote:
On 21/11/2026 10:50 pm, alvey wrote:
Noddy wrote:
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber.
Rubbish! The collets would remain in or near the valve keeper. >>>>>>>> Their absence could be observed easily with the cam and bucket >>>>>>>> removed. The fact that the valve separated at the hot point
tends to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near)
the fillet?
It's one Darren posted early on. And reposted it too.
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
I'm pretty sure that he knows what he's looking at..
I'm pretty sure that you have no idea whether or not he knows what
he's looking at..
I'm pretty sure you're as sure as I am that he has no idea whether I
know what it is I'm looking at or not
Keithr0 wrote:
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he
might well have a better understanding. But then, he was too stupid
to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on, but
we all know that you can't (or won't).
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
Keithr0 wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just
conjecture.
wrong. Xeno has provided a detailed and reasoned explanation of what the cause was and why. your bias is showing (again).
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:It has been discussed to exhaustion. Nothing new has been said for
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber >>>>>>>> crew. Well, they did try to blame it all on a faulty valve - a >>>>>>>> copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter >>>>>> has been to try to lay blame for this at my feet, and despite all >>>>>> the nonsense he's been through and the total *idiot* he's made of >>>>>> himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he
might well have a better understanding. But then, he was too stupid
to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on,
but we all know that you can't (or won't).
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
years. Nobody really knows what happened, even though xeno's ego
insists that his theory is the absolute truth. He has no more idea
than anybody else,
his explanation is simply based on noddy having been involved.
On 21/11/2026 10:50 pm, alvey wrote:
Noddy wrote:
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber.
Rubbish! The collets would remain in or near the valve keeper.
Their absence could be observed easily with the cam and bucket
removed. The fact that the valve separated at the hot point tends >>>>>>> to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the >>>>>> fillet?
It's one Darren posted early on. And reposted it too.
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
I'm pretty sure that he knows what he's looking at..
I'm pretty sure that you have no idea whether or not he knows what he's looking at..
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
Are you some special kind of stupid or something?
This topic has been reheated *many* times, and the only "discussion"
going on here is the amount of bullshit your mental mate can try to
invent to blame me for something I had nothing whatsoever to do with. In
the process all he's managed to achieve is to make himself lookDarren, you have treated everyone in aus.cars as *gullible* for the past
completely clueless, and make people like you look remarkably gullible.
On 22/11/2026 12:46 pm, Axel wrote:All you have shown is that you do not understand thermodynamics.
Keithr0 wrote:
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just
conjecture.
wrong.
ROTFL :)
Xeno has provided a detailed and reasoned explanation of what the
cause was and why. your bias is showing (again).
Despite your ridiculous claims to the contrary, his fantasy stories are *not* "evidence". He has presented a bunch of theories, and done
absolutely jack to show how they are relevant in any way.
On 22/11/2026 12:39 pm, Axel wrote:
Keithr0 wrote:I'm pretty sure you're as sure as I am that you don't even know which
On 21/11/2026 10:50 pm, alvey wrote:
Noddy wrote:
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber. >>>>>>> It's one Darren posted early on. And reposted it too.
Rubbish! The collets would remain in or near the valve keeper. >>>>>>>>> Their absence could be observed easily with the cam and bucket >>>>>>>>> removed. The fact that the valve separated at the hot point >>>>>>>>> tends to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) >>>>>>>> the fillet?
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what you're >>>>> looking at :)
I'm pretty sure that he knows what he's looking at..
I'm pretty sure that you have no idea whether or not he knows what
he's looking at..
I'm pretty sure you're as sure as I am that he has no idea whether I
know what it is I'm looking at or not
way is up.
The interesting thing to observe here is that the only people who seem
to buy his bullshit are Felix and Jerky :)
On 22/11/2026 12:46 pm, Axel wrote:
Keithr0 wrote:Still conjecture, he has never been anywhere near the engine in
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just
conjecture.
wrong. Xeno has provided a detailed and reasoned explanation of what
the cause was and why. your bias is showing (again).
question, the only thing that he has seen is one rather crappy picture.
On 21/11/2026 10:57 pm, Axel wrote:
alvey wrote:
Sooo Fraudster, you keep abusing and denigrating felix because...
he's just an arsehole
Whatsa matta, Felix? You like dishing it out when it suits you, but turn into a whinging little squib when you get it back.
How sad :)
On 22/11/2026 2:21 am, Axel wrote:
Noddy wrote:
On 21/11/2026 10:57 pm, Axel wrote:
alvey wrote:
Sooo Fraudster, you keep abusing and denigrating felix because...
he's just an arsehole
Whatsa matta, Felix? You like dishing it out when it suits you, but
turn into a whinging little squib when you get it back.
How sad :)
nope. just stating fact
Yet again you demonstrate a clear lack of understanding of what a "fact" actually is....
On 21/11/2026 3:25 pm, Keithr0 wrote:~~~~~~~~~~~~
On 21/11/2026 2:04 pm, Xeno wrote:
My interpretation comes from *experience* in the trade.
~~~~~~~~~~~~~
So you have significant experience of diagnosing valve failures in
racing engines that occurred while being driven to the limit?
You already know the answer to that question, but I shouldn't worry.
He'll be inventing some as we speak, and if this conversation goes on
for a few more days by the time it reaches the end he'll have talked his
way into being chief engine builder for the Holden Dealer Team :)
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:It has been discussed to exhaustion. Nothing new has been said for
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber >>>>>>>> crew. Well, they did try to blame it all on a faulty valve - a >>>>>>>> copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter >>>>>> has been to try to lay blame for this at my feet, and despite all >>>>>> the nonsense he's been through and the total *idiot* he's made of >>>>>> himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he
might well have a better understanding. But then, he was too stupid
to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on,
but we all know that you can't (or won't).
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
years. Nobody really knows what happened, even though xeno's ego insists that his theory is the absolute truth. He has no more idea than anybody else, his explanation is simply based on noddy having been involved.
On 22/11/2026 5:44 pm, Keithr0 wrote:~~~~~~~~~~~~~~
On 22/11/2026 12:39 pm, Axel wrote:
Keithr0 wrote:I'm pretty sure you're as sure as I am that you don't even know which
On 21/11/2026 10:50 pm, alvey wrote:
Noddy wrote:
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber. >>>>>>>> It's one Darren posted early on. And reposted it too.
Rubbish! The collets would remain in or near the valve keeper. >>>>>>>>>> Their absence could be observed easily with the cam and bucket >>>>>>>>>> removed. The fact that the valve separated at the hot point >>>>>>>>>> tends to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) >>>>>>>>> the fillet?
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what
you're looking at :)
I'm pretty sure that he knows what he's looking at..
I'm pretty sure that you have no idea whether or not he knows what
he's looking at..
I'm pretty sure you're as sure as I am that he has no idea whether I
know what it is I'm looking at or not
way is up.
When you have no point, attack the man!
Keithr0 wrote:
It has been discussed to exhaustion. Nothing new has been said for
years. Nobody really knows what happened, even though xeno's ego
insists that his theory is the absolute truth. He has no more idea
than anybody else,
he has provided a detailed explanation that no one has disputed
his explanation is simply based on noddy having been involved.
it's based on fact.
and noddy never assembled the head (according to him).
the only criticism of the assembly by noddy is that he used a
thinner than normal head gasket that reduced piston at tdc to valve open clearance.
https://ibb.co/ksCfyjFL
https://ibb.co/8gFfrgwj
Noddy wrote:
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber.
Rubbish! The collets would remain in or near the valve keeper.
Their absence could be observed easily with the cam and bucket
removed. The fact that the valve separated at the hot point tends >>>>>> to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) the
fillet?
It's one Darren posted early on. And reposted it too.
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what you're
looking at :)
stop talking to me. fuck off and myob
On 22/11/2026 6:12 pm, Axel wrote:
Keithr0 wrote:
It has been discussed to exhaustion. Nothing new has been said for
years. Nobody really knows what happened, even though xeno's ego
insists that his theory is the absolute truth. He has no more idea
than anybody else,
he has provided a detailed explanation that no one has disputed
On the contrary Felix. His nonsensical "diagnosis" has been disputed
*many* times. The problem for you is that you refuse to accept anything other than what *he* says, and are *far* too ignorant of the specifics
to have any idea yourself.
his explanation is simply based on noddy having been involved.
it's based on fact.
There is nothing "factual" about anything he has said. At best he is
simply guessing, and wildly at that, and there is nothing he could have extrapolated from either the photo or anything I or anyone else ever
said that could allow him to form the precise conclusion he claims to have.
He has *no* idea of the engine's specs. He has no idea of it's state of tune. He has not explained how a piston to valve clearance issue could affect only 1 of 8 exhaust valves in the same engine given that all the
exhaust valves were new and set to the same installed height on their
seats. He has no idea what the valve temperatures were. There is nothing
in the photo to indicate any kind of heat related failure. He has no
idea where the cam timing was set. He has no idea what the valve spring pressures were. He has no idea what the valve stem clearances were. He
has no idea what rpm the engine was operating at when the failure
occurred. He has no idea where the fuel mixtures where set. He has no
idea if the engine displayed any kind of miss or other abnormal event
prior to the failure occurring, and probably most critically he has no
idea of the condition of the remaining valve train components were after
the failure occurred.
In short, He has no idea about *anything* other than a failure having occurred which resulted in a valve being smashed to pieces by a piston
and splitting the bore. Outside of that he doesn't know *anything*, and
it is a practical impossibility for him to have reached *any* precise conclusion based on what little he knows of the event.
It's that simple.
and noddy never assembled the head (according to him).
That's right. The head was prepared by someone else and was delivered to
me in an assembled "ready to install" state.
the only criticism of the assembly by noddy is that he used a thinner
than normal head gasket that reduced piston at tdc to valve open
clearance.
The head gasket used wasn't a "shim head gasket" as your mental mate continues to incorrectly refer to it. It was a Toyota competition head gasket made specifically for the 20 valve 4AGE engine, and my "concerns" about using that gasket in particular were not about clearance issues as
I always routinely check clearances without any kind of head gasket in
place and they were found to be within spec.
My concern was that the gasket was designed specifically to block off a considerable amount of water passages and change the flow of coolant
through the engine.
You can see what I'm talking about here:
https://ibb.co/ksCfyjFL
The bare deck surface showing the coolant openings,
and:
https://ibb.co/8gFfrgwj
The gasket fitted which blocks most of them off.
According to the gasket manufacturer this was deliberate as these
particular engines suffer from a degree of cavitation at higher rpm's,
and blocking these passages apparently helped with the problem. Les had
never used one before as I recall, and at this point I stopped the
assembly and drew his attention to this. But he reckoned that they were
a popular gasket with 4AGE engine users and wanted to go ahead with it,
so that's what got fitted.
Personally I wouldn't have, but it wasn't my engine and I don't get to
call the shots. I only get to do what the customer is paying for, and
that's what he wanted. As for the compression thickness of the gasket
itself there was a difference of about 15 thousandths between this and
the standard factory head gasket, and if you were running one of these things for a compression boost as the mental maggot incorrectly claimed you'd be bitterly disappointed with the outcome given that the gasket
itself was quite expensive :)
In this photo you can also see the remnants of the red plasticine in one
of the valve notches of No: 1 cylinder where the piston to valve
clearances were checked before the head was finally assembled. Something your mental made *also* incorrectly claimed was never done :)
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
Are you some special kind of stupid or something?
This topic has been reheated *many* times, and the only "discussion"
going on here is the amount of bullshit your mental mate can try to
invent to blame me for something I had nothing whatsoever to do with. In
the process all he's managed to achieve is to make himself look
completely clueless, and make people like you look remarkably gullible.
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber crew. >>>>> Well, they did try to blame it all on a faulty valve - a copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter has
been to try to lay blame for this at my feet, and despite all the
nonsense he's been through and the total *idiot* he's made of himself
in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just conjecture.
On 22/11/2026 11:10 am, Keithr0 wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just
conjecture.
Ahem, it was Darren who provided *speculation* as to the cause - his conclusion was a faulty valve. That conclusion was based on the fact
that the valve head had parted company with the stem. Such speculation
does not guarantee prevention of a recurrence.
What I provided was neither speculation nor conjecture. What I provided
was a logical sequence of events from cause to effect, a failure mode, a failure theory, all of which was based upon the evidence given in both pictoral and verbal form plus my training and experience in the motor
trade. I was able to look at the evidence and construct a logical chain
of events leading to the destruction of the engine.
I provided examples along the way such as the one linked below.<AI slop snipped>
https://hips.hearstapps.com/mtg-prod/65cd764c483a56000876b893/0311phr- compress-13-z.jpg?w=768&width=768&q=75&format=webp
The link shows the typical heat gradient in the exhaust valve. Valves
lose heat through the valve seat and the guides. The linked diagram
clearly shows the highest temperatures at the upper mid section of the
valve stem. Well, look at where the valve failed;
https://ibb.co/cwxR1yL
I gave, more than once, a similar example on a VW where valve seating,
hence cooling, was compromised leading to the same scenario as occurred
with Les' engine.
On 22/11/2026 5:44 pm, Keithr0 wrote:I leave that to you since you have vast experience.
On 22/11/2026 12:39 pm, Axel wrote:
Keithr0 wrote:I'm pretty sure you're as sure as I am that you don't even know which
On 21/11/2026 10:50 pm, alvey wrote:
Noddy wrote:
On 21/11/2026 3:10 pm, Axel wrote:
Xeno wrote:
On 21/11/2026 2:56 pm, Axel wrote:
Xeno wrote:The pic where the valve is embedded into the combustion chamber. >>>>>>>> It's one Darren posted early on. And reposted it too.
Rubbish! The collets would remain in or near the valve keeper. >>>>>>>>>> Their absence could be observed easily with the cam and bucket >>>>>>>>>> removed. The fact that the valve separated at the hot point >>>>>>>>>> tends to negate collet issues and tight guide clearances.
where's the visual evidence that the valve separated at (near) >>>>>>>>> the fillet?
Oh yes it does show that
No, it doesn't show that at all Felix. You have no idea what
you're looking at :)
I'm pretty sure that he knows what he's looking at..
I'm pretty sure that you have no idea whether or not he knows what
he's looking at..
I'm pretty sure you're as sure as I am that he has no idea whether I
know what it is I'm looking at or not
way is up.
When you have no point, attack the man!
Keithr0 wrote:
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:It has been discussed to exhaustion. Nothing new has been said for
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber >>>>>>>>> crew. Well, they did try to blame it all on a faulty valve - a >>>>>>>>> copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter >>>>>>> has been to try to lay blame for this at my feet, and despite all >>>>>>> the nonsense he's been through and the total *idiot* he's made of >>>>>>> himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he >>>>> might well have a better understanding. But then, he was too stupid >>>>> to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on,
but we all know that you can't (or won't).
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
years. Nobody really knows what happened, even though xeno's ego
insists that his theory is the absolute truth. He has no more idea
than anybody else,
he has provided a detailed explanation that no one has disputed
his explanation is simply based on noddy having been involved.
it's based on fact. and noddy never assembled the head (according to
him). the only criticism of the assembly by noddy is that he used a
thinner than normal head gasket that reduced piston at tdc to valve open clearance.
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:It has been discussed to exhaustion. Nothing new has been said for
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber >>>>>>>> crew. Well, they did try to blame it all on a faulty valve - a >>>>>>>> copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter >>>>>> has been to try to lay blame for this at my feet, and despite all >>>>>> the nonsense he's been through and the total *idiot* he's made of >>>>>> himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he
might well have a better understanding. But then, he was too stupid
to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on,
but we all know that you can't (or won't).
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
years. Nobody really knows what happened, even though xeno's ego insists that his theory is the absolute truth. He has no more idea than anybody else, his explanation is simply based on noddy having been involved.
On 22/11/2026 11:10 am, Keithr0 wrote:If you can afford race cars you can afford to hire a properly trained
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just
conjecture.
Precisely and there is no evidence either way so none can be provided,
if he is right its just a guess, no parts were tested by a metallurgist
and there was no immediately obvious reason why the valve failed.
It was a race car, race cars break shit that don't normally break on standard road cars, the owner knows this, if you can't afford to fix
broken race cars don't race.
It's easy to explains. On VWs only the EV on Cyl 3 was affected forSo we're talking about VW engines now not Toyotas?
reasons I explained. On any other engine it will be in the cylinder that runs hottest, or runs with least clearance, or runs with the weakest
valve spring. Not all cylinders are equal, there is always variation,
even in blueprinted motors.
On 22/11/2026 5:54 pm, Keithr0 wrote:xeno, if stupidity were an Olympic event, you'd get gold for not even
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:It has been discussed to exhaustion. Nothing new has been said for
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber >>>>>>>>> crew. Well, they did try to blame it all on a faulty valve - a >>>>>>>>> copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter >>>>>>> has been to try to lay blame for this at my feet, and despite all >>>>>>> the nonsense he's been through and the total *idiot* he's made of >>>>>>> himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he >>>>> might well have a better understanding. But then, he was too stupid >>>>> to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on,
but we all know that you can't (or won't).
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
years. Nobody really knows what happened, even though xeno's ego
insists that his theory is the absolute truth. He has no more idea
than anybody else, his explanation is simply based on noddy having
been involved.
Darren, if stupidity were an Olympic event, you'd stand accused of using performance enhancing drugs
On 22/11/2026 3:25 pm, Xeno wrote:
On 22/11/2026 11:10 am, Keithr0 wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumberAnd you're not willing to consider any other cause.
crew. Well, they did try to blame it all on a faulty valve - a
copout!
Of course not. His sole objective in this whole ridiculous matter
has been to try to lay blame for this at my feet, and despite all
the nonsense he's been through and the total *idiot* he's made of
himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
And xeno has provided NO evidence whatsoever that he's right, just
conjecture.
Ahem, it was Darren who provided *speculation* as to the cause - his
conclusion was a faulty valve. That conclusion was based on the fact
that the valve head had parted company with the stem. Such speculation
does not guarantee prevention of a recurrence.
What I provided was neither speculation nor conjecture. What I
provided was a logical sequence of events from cause to effect, a
failure mode, a failure theory, all of which was based upon the
evidence given in both pictoral and verbal form plus my training and
experience in the motor trade. I was able to look at the evidence and
construct a logical chain of events leading to the destruction of the
engine.
ONE POSSIBLE cause only, other possibilities exist and are just as
possible.
I provided examples along the way such as the one linked below.<AI slop snipped>
https://hips.hearstapps.com/mtg-prod/65cd764c483a56000876b893/0311phr-
compress-13-z.jpg?w=768&width=768&q=75&format=webp
The link shows the typical heat gradient in the exhaust valve. Valves
lose heat through the valve seat and the guides. The linked diagram
clearly shows the highest temperatures at the upper mid section of the
valve stem. Well, look at where the valve failed;
https://ibb.co/cwxR1yL
I gave, more than once, a similar example on a VW where valve seating,
hence cooling, was compromised leading to the same scenario as
occurred with Les' engine.
Since nobody examined the actual valve, nobody can give a definitive
cause. What you are pushing is ONE possible cause, not THE definite
cause, largely because of your obsession with noddy, if clocky had
worked on the engine, your attitude would be completely different.
On 22/11/2026 6:12 pm, Axel wrote:
Keithr0 wrote:So where is the proof that that was the ACTUAL cause of the problem?
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:It has been discussed to exhaustion. Nothing new has been said for
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:you've provided NO evidence whatsoever that he's wrong, dickhead >>>>>>>
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber >>>>>>>>>> crew. Well, they did try to blame it all on a faulty valve - a >>>>>>>>>> copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous
matter has been to try to lay blame for this at my feet, and
despite all the nonsense he's been through and the total *idiot* >>>>>>>> he's made of himself in the process, he has yet to manage that. >>>>>>>
actually done a motor mechanic or auto machining apprenticeship,
he might well have a better understanding. But then, he was too
stupid to even get signed onto any apprenticeship - and definitely >>>>>> not an AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or >>>>> how much shit is thrown (mainly by you), nobody here will ever know >>>>> exactly what caused the problem. Anybody with sense would move on,
but we all know that you can't (or won't).
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
years. Nobody really knows what happened, even though xeno's ego
insists that his theory is the absolute truth. He has no more idea
than anybody else,
he has provided a detailed explanation that no one has disputed
his explanation is simply based on noddy having been involved.
it's based on fact. and noddy never assembled the head (according to
him). the only criticism of the assembly by noddy is that he used a
thinner than normal head gasket that reduced piston at tdc to valve
open clearance.
On 22/11/2026 5:54 pm, Keithr0 wrote:
On 22/11/2026 12:52 pm, Axel wrote:
Keithr0 wrote:It has been discussed to exhaustion. Nothing new has been said for
On 21/11/2026 11:32 pm, Xeno wrote:
On 21/11/2026 10:50 pm, Axel wrote:
Noddy wrote:Darren's problem is - he doesn't understand the problem. Had he
On 21/11/2026 1:07 pm, Keithr0 wrote:
On 20/11/2026 10:00 pm, Xeno wrote:
There is no other explanation coming from the dumb and dumber >>>>>>>>> crew. Well, they did try to blame it all on a faulty valve - a >>>>>>>>> copout!And you're not willing to consider any other cause.
Of course not. His sole objective in this whole ridiculous matter >>>>>>> has been to try to lay blame for this at my feet, and despite all >>>>>>> the nonsense he's been through and the total *idiot* he's made of >>>>>>> himself in the process, he has yet to manage that.
you've provided NO evidence whatsoever that he's wrong, dickhead
actually done a motor mechanic or auto machining apprenticeship, he >>>>> might well have a better understanding. But then, he was too stupid >>>>> to even get signed onto any apprenticeship - and definitely not an
AME apprenticeship. That was way way outta his league!
Same shit different day, it's the same old stuff that you've been
falling back on for years. Your diagnosis of the failure in Les's
engine is pure conjecture, no matter how many words are written, or
how much shit is thrown (mainly by you), nobody here will ever know
exactly what caused the problem. Anybody with sense would move on,
but we all know that you can't (or won't).
move on to what? this is an automotive discussion forum, and the
probable cause of an engine failure is being discussed, which is
entirely on topic
years. Nobody really knows what happened, even though xeno's ego
insists that his theory is the absolute truth. He has no more idea
than anybody else, his explanation is simply based on noddy having
been involved.
Exactly, it was so long ago that it beggars belief that these clownsValve failures happen to all makes and types of engines. The failure
drag up the same old shit for no other reason than their OCD with Noddy.
I'd be surprised that any of them could identify a Toyota 4AGE engine without Googling it first yet they seem to be able to diagnose a valve failure that happened many years ago from a couple of photos.
On 22/11/2026 9:24 pm, Xeno wrote:
It's easy to explains. On VWs only the EV on Cyl 3 was affected forSo we're talking about VW engines now not Toyotas?
reasons I explained. On any other engine it will be in the cylinder
that runs hottest, or runs with least clearance, or runs with the
weakest valve spring. Not all cylinders are equal, there is always
variation, even in blueprinted motors.
| Sysop: | Jacob Catayoc |
|---|---|
| Location: | Pasay City, Metro Manila, Philippines |
| Users: | 5 |
| Nodes: | 4 (0 / 4) |
| Uptime: | 498678:52:54 |
| Calls: | 212 |
| Calls today: | 3 |
| Files: | 912 |
| D/L today: |
33 files (22,594K bytes) |
| Messages: | 69,885 |