Dave's Transformers Hot Wheels Collaborative Rant wave 2
Twin Mill (Target exclusive redeco)
El Segundo Coupe
GT-Scorcher
Permalink:
https://www.eyrie.org/~dvandom/BW/Collab/HotWheels2
The Target exclusive was briefly on sale for $24.49, so I picked it up.
https://www.eyrie.org/~dvandom/BW/Collab/HotWheels1 has the original version
of the mold.
I was spurred to move this review up in the queue when I saw El Segundo and GT-Scorcher on clearance already at Walmart for $15 (sigh), so figured I should see if I liked either of them enough to want to grab a spare for customizing. Turns out...not really. It doesn't help that both have
elements of transformation that would scrape the heck out of any paint I
might apply beyond minor detailing.
CAPSULES
$35 from Hasbro Pulse.
Twin Mill: Original mold was recommended, but I definitely don't
recommend paying full price for this. Heck, I probably overpaid at $24.
El Segundo Coupe: This could've been an okay toy, but it feels like they just sort of gave up without fixing some significant problems. It also
doesn't help that it has a stupid-looking gun and nowhere to store it in
robot mode. If you can find it on clearance, it's worth the $15, but definitely not worth full price.
GT-Scorcher: Another "worth $15, I guess" figure. In this case it's
more that the design itself is so-so, without the Coupe's "if you fixed these couple of things it'd be good" elements. Did they maybe just figure no one
was going to open these and they'd all end up on display in lucite slabs? That's not to say it doesn't have some elements that didn't work as planned, but they're less hasslesome than the Coupe's execution flaws.
In the wake of this wave, I'm not really keen on getting a wave three if one happens. Especially since the price is unlikely to come down to match other Deluxes. Clearance/Ross purchases only for any more of these, I
think.
RANTS
I did try to find an actual GT-Scorcher to compare, but I did find an El Segundo Coupe at least. (It's possible I own a GT-Scorcher, but my Hot
Wheels accumulation is not even remotely organized, and it's a bit on the Normal Racecar side for my usual buying habits anyway.)
All of the Hot Wheels Collaboratives are cars designed by Hot Wheels
(they have their origin listed as El Segundo CA on the cardbacks), so Mattel owns the IP for them rather than licensing it from a real car company. While wave 1 went with somewhat fanciful designs, the new molds for this wave are a bit more like real cars with the serial numbers filed off...so, rather appropriate for Transformers, when you think about it.
Packaging: Same blister packs as the first wave. The upper right corner of the cardback has the assortment number, which I forgot to include in the first wave reviews. Fortunately, I still have the cards, so I went back and added that info. Otherwise, same deal. The fronts have art of the car mode emerging from a portal on a track while the robot mode runs towards the
viewer next to the track. The back has renders of both modes, the Collaborative logo with the relevant car mode on the left to balance the Autobot symbol on the right. In one of the lower corners is a silhouette of robot mode with a height claim of "5 in. 12.7cm" which is a bit too
consistent to match reality. I mean, to one significant digit they're all
five inches tall, yeah, but for instance Bone Shaker was 12.8cm tall. All
are packaged in vehicle mode, to evoke the look of a giant regular Hot Wheels blister.
I am a little irritated that Hot Wheels regular releases have more "bio note" information than Transformers do these days. (Well, special set
redecos tend to just have the special set info and no individual car stuff.)
AUTOBOT: TWIN MILL
Crossover: Hot Wheels
Assortment Number: 03
Altmode: Twin Mill
Transformation Difficulty: 21 steps
Previous Name Use: Collab
Previous Mold Use: Collab
Weirdly, they didn't even give this a different name, I guess the conditions of the license required naming the toy after the car regardless of redecos. That follows how all Twin Mills are Twin Mill over the decades
(Super Twin Mill has a totally different shape) despite minor differences in design. Thus, to the extent any of these are characters, I suppose Twin Mill simply can change his coloration at will, for fashion reasons.
Packaging: Same as the original Twin Mill. The cardback renders make it look like fists and engine bits are silver rather than light gray. In fact, the cardback renders are identical in pose to the original Twin Mill, suggesting they just loaded a different skin and sent it off. The card front art is also the same but re-skinned, and is more accurate than the original's (which showed silver on the shoulder fronts that the toy does not have).
Color Swaps: Blue becomes bright red, clear blue becomes smoky clear (or it's clear colorless with smoky clear paint). Clear colorless, black, and light gray paints stay the same. The exhaust fire blasts are a slightly more golden yellow, but that might be clear paint over colorless clear as well.
Paint Apps: In vehicle mode, there's two white stripes on the hood and roof. As with the original the space between the engines has no stripes, instead being painted the main color (red in this case), which is also used
on the front part of the roof. There's a full Hot Wheels logo in white on black across the nose. On either side just rear of the engines is a white Autobot symbol over a white Hot Wheels swoosh (without the name in it).
Amber turn signals, and the tail lights are painted red but it's not super obvious against the red plastic.
In robot mode, the face is silver, as are circles on the sides of the
head and the exhaust pipes sticking out the back of the helmet. In addition
to all the bits on Twin Mill Blue that are silver, plus more around the shin vents, the shoulder not-quite-vents, and the pelvis details. Golden yellow
on the rest of the kneecap paint that was blue on Twin Mill Blue, the
shoulder triangles, the visor, and the crest along the top of the helmet as well as the indents on the helmet wings. On the back, the bits that are
light blue on TMBlue are also golden yellow. The red paint on the engine weapons continues around the sides where the gray would be visible, just like the blue on TMBlue.
Mold Changes: None that I noticed.
Other Notes: Nothing to add here.
Overall: Other than being awfully expensive to get redecos, it's a
decent mold and a classic Hot Wheels car. I wouldn't say either one is superior to the other, it comes down to whether you prefer red or blue.
AUTOBOT: EL SEGUNDO COUPE
Crossover: Hot Wheels
Assortment Number: 04
Altmode: El Segundo Coupe (vague resemblance to a Dodge Viper)
Transformation Difficulty: 17 steps
Previous Name Use: None
Previous Mold Use: None
So, this has a weird history...back in 2022, Hot WHeels introduced the Coupe Clip, a wheel-less car slug meant to be placed on a keychain or
backpack zipper or whatnot. I actually have a few color runs of that one. I guess it was popular enough that they came out with a rolling version,
calling it the El Segundo Coupe, and according to the fan wiki there's been a bunch of decos of this one already, including two different color schemes
from the 2025 "Fan Driven" assortment (I got the white one). Oddly, I have
yet to see a single-packed Bone Shaker since starting to look, and it was
also in the Fan Driven set (I want to make one into Barbie's Dream Dragula). Basically, this is a new Signature Car they're trying to push, whereas Twin Mill was one of the original generation signature cars.
Packaging: Two ties hold the car in the blister, the Fire Blasts are
held in at the top of the inner tray by blister shape alone. The renders
have the white paint wrapping around to the bottom edge of the doors, but the toy does not.
Altmode: This is based on the 2024 HW Turbo assortment's blue color scheme, with some slight differences. The 2024 car has no stripes on the
roof, but the Transformer does. There's also a Hot Wheels logo on the front
of the hood of this toy, which the original lacks. The original decos were based on the Coupe Clip color schemes, so I guess they wanted to go with something more tied to this car (the other deco that year was more blue-
green, which would've avoided blending in with the original Twin Mill Transformer on the pegs, but I guess they wanted Hot Wheels Blue at least
once a wave?). And yes, it goes with all the details of the El Segundo Coupe version, not the Coupe Clip's smoother shape, down to the little bolts around the edge of the windshield (I guess this makes it easier to pop the
windshield to get the driver out in a wreck). The side windows don't have rivets, but they do have little sliding doors (not actually slide-able)
molded into the side windows so that stuff can be passed to the driver
without needing to remove the windows. This sort of car doesn't waste weight on the ability to roll down windows, I guess. The tires have "HOT WHEELS"
and the Hot Wheels swoosh molded around the edges.
4.25" (11cm) long not counting the exhaust Fire Blasts, compared to the regular Hot Wheels version of the car which is 2.75" (7cm) long. So if the
Hot Wheels car is 1:72 scale, the Transformers version is around 1:46 scale.
I remember when Deluxe cars were more like 1:32 scale (and weren't thirty
five dollars). The body shell is mostly medium blue with white trim around
the bottom edges, gold and red stripes, and the racing number 68 in black on white ovals on the hood and sides. There isn't actually any white plastic,
all the white is gloss white paint over other plastics. The windshield/side windows chunk, and exhaust Fire Blasts are clear light blue plastic, the
wheels and exhaust pipes are black plastic, everything else is medium blue plastic (with MAYBE a faint metallic inclusion).
Lots of gloss white paint along the lower edges (and on the underside,
but that's for robot mode), and the ovals for the racing numbers. The
numbers themselves are printed in black, while the rear window louvres are painted gloss black. The support post parts of the windshield chunk (the A
and B posts and some trim) are painted a slightly metallic blue that's an
okay match for the blue plastic, if a little lighter. The stripes along the hood and roof (interrupted by various molded mesh/vent bits) and on the sides between the wheels are red flanked by gold, and the wheel hubs are also gold. The stripe is interrupted at the front of the hood by a golden Hot Wheels
logo. The headlights are painted dull silver. The "door" panels (removable, they have most of the door and the rear fender as part of them) have the
HWGRFX (Hot Wheels Grafix) logo in gold above the stripes, and at the front
end under the stripe a white Hot Wheels logo and a teeny white Autobot
symbol. The taillights are painted gloss red. There is not a molded space
for a license plate, but I'm pretty sure this car is not even remotely street-legal anyway. (The shape of the taillights is not the same as on the 1:72 car, but the transformation seams and hinges back there prevented a
fully accurate mold.)
The exhaust Fire Blasts are rigid plastic, and have raised tabs on the pegs so that they won't go into 5mm sockets to work as energy daggers...or so
I thought. Turns out they fit perfectly in slots under the thumbs, forcing them to be held as downward-stabbing energy daggers instead. They attach to 3mm studs at the ends of the exhaust pipes, which fork apart from a central core that is pegged onto the underside. The socket for that is the only 5mm socket on the car, none on the non-underside parts. Both exhaust pipes end
in 3mm studs. If you remove the door panels, 5mm sockets are revealed, so I guess you could make that a Dark of the Moon racecar attack mode by attaching some borrowed guns with long enough peg grips.
As one would expect, it rolls very well, if without much ground
clearance.
Transformation: The instructions don't show the doors coming off during transformation, but good luck not popping them off anyway. I get the feeling they were originally supposed to be pinned or riveted but kept breaking so
they just took the easy way out and made them removable. Like, seriously, if you try to follow Step 2 in the instructions, it doesn't pull the arms off,
it just removes the doors. The doors are supposed to be rotated, but in reality you just have them come off at the start and put them back on later. Leaving them on makes it harder to get the fists folded out, and one of the fists on mine was much harder to pull out regardless, and needed a knife or creative use of the door panel as a prying tool.
There's really no way to get the feet out of the boots without using a knife or other prying tool. I managed to get one out using the gun to pull
the foot out enough to hook behind it, but the other wasn't playing along.
If the Fire Blasts didn't have those tabs, you could insert them into the
soles as handles, which makes me wonder even more why they even PUT the tabs
on them...it's not like they need a specific alignment! The roof piece pulls out of the way (with some effort) to let the legs transform and the hips
turn, but it needs to be snapped back down. Surprisingly, this doesn't block the waist rotation.
Robot Mode: There's a somewhat flat feeling to this, with minimal chest and backpack compared to usual. The hood panel is the chest front, lying
quite flat, otherwise a pretty standard "front fenders as shoulders, rear
third as boots" car transformation. The head is reminiscent of Blaster, but with sunglasses. There's a bit of asymmetry in the legs because the 5mm
socket where the exhaust gun goes stays entirely with the left boot.
5" (12.7cm) tall in some blue but a lot more white, light gray, and
black than in vehicle mode. Light gray plastic makes up the torso core sandwiched between the hood front and windshield back, plus the shoulder joints, biceps, fists, hips, heels, and most of the pelvis. The front of the pelvis is black plastic, as are the forearms, thighs, and exhaust gun. Less obviously, the shins are black plastic painted over on the fronts, and I suspect the shoulder fronts are also black plastic but they're completely coated in white paint. In addition to all the vehicle shell bits, the front
of the head and the feet are made of blue plastic. The back of the head,
which includes the visor as lightpiping, is clear blue plastic mostly painted over.
The back of the head is painted that slightly metallic blue, the
shoulder and shin fronts are painted gloss white, the face and all but the inner (hollow) sides of the thighs are painted silver. Metallic-ish blue is also used for some details on the shins, and most of the pelvis center front.
I think some of that paint on the pelvis got onto the top side, since the
waist joint is really stiff in a way that feels like not-quite-paintlock. No robot-specific Autobot symbol, just the ones on the door panels that go on
the forearms and tend to fall off.
The neck is a restricted ball joint with the socket inside the head,
while the waist is a smooth (if sticky, with mine) swivel. The shoulders are hinge and swivel joints but can only lift up about 45 degrees from the
sides. Bicep swivels, hinge elbows, and the wrists bend inwards on transformation hinges. The hips are the sort where a third of the pelvis
moves with the joint, pinned hinge and swivel universal joints. Upper thigh swivels, hinge knees with a bit of car back end that folds inwards when
bending the knees so the car doesn't have cuts in back. The ankles have instep-tilt hinges in the heels, and while the entire foot can fold down on a transformation hinge in the heel it looks wrong when you do that.
The fists can hold 5mm pegs, and there's 5mm sockets on the forearms
that are dedicated to the door panels (the door panels have very short pegs
and won't really go anywhere else). There's a single 5mm socket sticking out from the inner edge of the left shin, to avoid having to split the gun
storage socket between two pieces. There's also 5mm sockets on the soles of the feet. No 3mm sockets, and no good place in robot mode to store the gun (putting it on the shin does not count as a good place).
The gun is really just disappointing and stupid-looking. If this was based on a real car with exhaust pipes that connected in the middle, or even
if the original toy was molded that way, I'd at least appreciate the need to follow the mold. But this design was made to be a Hot Wheels, and is part of the modern generation of minimal underbody detailing...the two exhaust pipes just sort of stop before they can join up. They should've just made two separate pistols with one Fire Blast each, instead of this weird tuning fork wannabe. That'd have also let them put a socket on each shin and avoid the
bit where one leg has a socket hanging off the inner face. Still as for what it IS instead of what it SHOULD HAVE BEEN, it's a single chunk of black
plastic in a sort of wide tuning fork shape, with a short 5mm peg grip at the back and some rectangular tabs that go into slots on the kneecaps to keep it from wiggling in vehicle mode. The two barrels end in 3mm studs. Total
length is 1.25" (32mm). I find the gun looks slightly less stupid if you remove a door panel and attach the gun to the underside of the forearm, but there's nowhere to store the door if you do that (even if there were other sockets, the pegs on the doors are too short to stay in them, because longer pegs would stick into the forearms and block the fist transformation).
The Fire Blasts are rigid clear plastic as most of the recent ones have been, and the molding makes them look like icicles or something along those lines. Each is 1.25" (3.0cm) long including the peg/socket at the back. The 5mm pegs have 3mm sockets in them like many Fire Blasts do, but for some ill-advised reason there's tabs on the sides of the pegs so that they can't actually go into most 5mm sockets. They do fit perfectly into the gap
between the fingers and the palm, though, as mentioned earlier. However, to uses them as down-stabbing daggers, the door panels need to be rotated back
to their vehicle mode positions. Not that they're any more stable in the "proper" robot mode positions, due to those short pegs.
Overall: Licensed toys often have the robot modes suffer due to the
needs of satisfying the licensor of the altmode, but this toy didn't have to
be quite so hobbled. It really feels like they had a slightly better design, but by the time all the required license and safety changes were made it just wasn't very good...but they decided to give up and approve the result
anyway. Unless you've somehow managed to build up a lot of affection for the El Segundo Coupe itself in its few years of existence, this is a very
skippable and overpriced toy.
AUTOBOT: GT-SCORCHER
Crossover: Hot Wheels
Assortment Number: 05
Altmode: GT-Scorcher (Group 5 race car)
Transformation Difficulty: 23 steps
Previous Name Use: None
Previous Mold Use: None
This is another fairly recent design, coming from 2021. It's mostly
been in multipacks or track sets since 2024, explaining why I haven't been
able to find a solo-pack of it. (I have confined myself to single MSRP price when trying to find the original versions of these vehicles, not gonna drop
the money on a color-changer, a 5-pack, or scalper prices for this.)
Packaging: Three ties hold the car into the blister, but you only have
to cut the one across the hood. There's no accessories or Fire Blasts, everything's part of the car. The renders show smoky windows and engine- covering plastic, but on the toy they're dark amber.
Altmode: This is based on the 2022 "Retro Racer" redeco, although some
of the details are moved around and the sponsor decals are absent. They seem to be fake sponsors like on the El Segundo, so why not include them too? Strange decision. This is also not the toy's original deco, but it was introduced as part of a unified HW Racing scheme, so perhaps this was its
true "original" deco. First one it had on its own, anyway, shared with a
green and yellow deco. Unlike the regular Hot Wheels version, this doesn't have an articulated front air dam. I mean, it moves for transformation, but
it doesn't have the Special Feature articulation that the 1:72 scale version boasts. It also has a tallish spoiler in back, and exhaust pipes nearly
flush with the bottom edges of the doors. Like the Coupe, it has molded
rivets around the edges of the windshield, as well as on the side and rear windows. The headlights even have rivet bumps, I guess to make replacing
them quicker too? The front wheels are slightly smaller than the rear
wheels, and have different hubs...the rear wheels have the same fivefold
spoke pattern as the Coupe's, but the front hubs are more solid, with 18
small spokes. All the tires have the same HOT WHEELS and swoosh molding. On the off chance this is a street-legal car, there is room on the rear bumper
to put a license plate, although it'd have to be split in two. The
centerline of the hood is clear to show the engine inside (well, engine-like details molded into the backside of the clear plastic), making the opaque
part of the hood a big U shape.
4.25" (11cm) long, I don't have a 1:72 scale GT-Scorcher to compare this against. Mostly red with black and white accents and amber clear plastic.
All four windows and the middle of the hood are clear amber plastic, as are
the headlights. The wheels and air dam are black plastic, as are the outer corners of the rear bumper. The rest of the rear bumper and the visible peg under the spoiler are light gray plastic, which is otherwuse more of a robot mode plastic. The rest of the body shell is bright red plastic.
The roof is white with thin white stripes flanking the main band, and a combination of thin and thick stripes outline the edges of the hood U. A
small white Autobot symbol above a white Hot Wheels logo are on the front of the hood just ahead of the clear part. A larger white Hot Wheels logo is printed on top of the spoiler, with white hazard stripe marks on either side
of the spoiler. All the wheel hubs are painted silver. The sides are
painted black, mostly, with a white pin stripe along the top border and a big white Hot Wheels swoosh that gets cut off a bit on the top (there's two versions of the logo so it can be put on both sides without either looking weird, but the singleton style is the one on the right side). A small black
HW is printed on the front fender ahead of the wheel, while behind the rear wheels are white rectangles with black 8's in them on either side. The top
of the right rear fender has another black 8 on white rectangle. The tail lights are not painted, although painting them red on red plastic would be a bit of a waste of a paint app. The molded reinforcing bars on the windshield and rear window are not painted either.
There are no connectors available in this mode, although from behind you can see the spoiler sword's peg folded up and inaccessible. It rolls well
but with intentionally negligible ground clearance, what with the big flat
air dam jutting out in front.
Transformation: While they didn't quite have to go to part removal, this is a significant hassle to transform as well, especially trying to get back into car mode. There's these mid-forearm hinges that have to be bent to let the arms kinda snake into position, and several steps that all seem to want
to happen at the same time or something unfeasible. Everything is so tightly connected in vehicle mode that even starting the transformation might require
a knife depending on your fingernail strength or patience with slowly flexing everything until seams open up. I had a little more luck kinda flexing the sides down to free stuff up, but it was awkward, and not really something I could do in reverse order to go back to vehicle mode.
The roof panel is an even bigger aesthetic problem here than on the
Coupe, it doesn't even lock down onto the back, it sticks out slightly and leaves a hollow torso in back. More functionally a problem is the fact that the shoulders are clearly meant to lock into place on the sides of the torso, but they don't really stay in place.
Robot Mode: Another flat bot, now with a big hood chunk panel (the clear part) sticking up behind the head. The whole roof and "would be a trunk if race cars had those" section are a sort of raised cape, but it only gets in
the way of waist rotation a little. Still kinda weird that it doesn't have a hinge to collapse down, though. The sternum section of the torso is part of the clear plastic engine cover. Since this one has tailpipes molded in place rather than part of the weapon, the toy makes use of them to plug into
sockets in the tops of the feet to lock them in place if you want. The shape of the helmet makes me think he should be pelting me with Timbits, which is a joke maybe three people will get.
5" (12.6cm) tall at the head, 5.25" (13.5cm) tall at the back of the
roof cape. The main change to the colors is the addition of more light gray, which is used for the struts holding the front wheels onto the shoulders, the biceps, the torso core, the back of the pelvis, the hips, the knee joints,
the heel spurs, the interior of the car roof (including a hinge bit so that clear plastic doesn't have to do that job) and the peg of the spoiler blade.
In addition to the vehicle shell parts, bright red plastic is used for the
bulk of the head and the hidden blade. The shoulders, forearms, torso shell and boot outer and rear sides are vehicle shell bits. The shins, toes,
thighs, pelvis front, and fists join the black plastic. The head has pretty effective amber plastic lightpiping, and they didn't try painting over the
eyes like sometimes happens.
Not a lot of paint that isn't from vehicle mode. Silver on the face,
some vent details on the helmet, and the front of the pelvis. They actually painted black over silver for parts of the pelvis rather than leaving those bits unpainted. Significant use of red paint on the shins, the tall kneepads and vents lower down.
The neck and waist are both smooth swivels. The shoulders SHOULD be swivels at the root with the upper arms hinged to lift up to the sides, but
the transformation hinge doesn't stay locked down so attempts to lift the
arms to the sides tend to lift the whole shoulder. Bicep swivels, hinge elbows, and the wrists have transformation hinges to bend inwards. Pinned hinge and swivel hips, upper thigh swivels, and technically single hinge
knees but the transformation hinges lower down tend to bend too since the
tabs that lock into the knee sections come undone easily. When not locked down, the ankles wiggle to the sides and maybe a little front and back.
The fists can hold 5mm pegs, there's 5mm sockets on the soles of the
feet, and nonstandard storage on the spoiler section for the weapon pieces.
The back of the pelvis has a rectangular socket, but it's too narrow to fit
3mm pegs and serves no purpose in this mode.
The weapons are a pair of short spatula-like blades that can either be held separately or put in one hand for a longer weapon. Think Cloud's giant sword from Final Fantasy, but shrunken down to dagger size. The main blade
is unfolded from the spoiler, so it has a hinge near the tip. Other than the hinged light gray peg on the spoiler part, they're made of bright red
plastic, and the smaller blade has no paint. When both are plugged into the same fist, the combined weapon is a little over 2.5" (6.5cm) long. The main blade is 1.5" (3.5cm) long including the peg, while the shorter blade is a little over an inch (3cm) long including the peg.
Overall: While it has a few little bits that set it apart from other car Transformers, it's still just sort of okay. Even if you fixed the problems with stuff holding in place in robot mode, it wouldn't be anywhere near worth the MSRP.
Dave Van Domelen, still pondering what to review next.
--- PyGate Linux v1.5.19
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)