• Dave's TFOne Rant: TakaraTomy Brave Leader Optimus Prime

    From Dave Van Domelen@3:633/10 to All on Thursday, November 05, 2026 22:21:37
    Dave's Transformers One Rant

    Brave Commander Optimus Prime (Cybertronian truck)

    Permalink: http://www.eyrie.org/~dvandom/BW/One/TTOptimus

    Okay, so this is another big Optimus movie toy from TakaraTomy that
    Hasbro sold online rather than trying to fit it into their assortments for regular TFOne or Studio Series releases. It comes in "authentic TakaraTomy" packaging which is then put into a black box with white lettering so they
    don't have to mess with stickers (and can sell it to box fiends). It was
    sold as Orion Pax on Pulse (where it sold out before I noticed it was up) and other sites (like Entertainment Earth, which is where I got it). It's somewhere between Leader and Commander in size, much like the RotB Optimus Primal I got a few years ago. I've been kinda sitting on this for a few months, but after reviewing a bunch of CyberWorld toys I decided I wanted to
    do something with elbows and this had been sitting long enough to risk going into the "never opened" pile with toys like Deathsaurus.


    CAPSULE

    Originally $80 at Hasbro Pulse or $87 at Entertainment Earth.

    Brave Leader Optimus Prime: Pretty good in both modes, although some elements of the transformation are annoying and you probably want a thin
    knife or prying tool around. Likely the best TFOne Optimus Prime, but if they'd only done some more testing to eliminate some of the problems it would've been definitely the best. It's bigger and has more going on than a modern Leader, almost justifying the price. Recommended.


    RANT

    Packaging: Okay, time to get out the translator app, although a lot of
    the text on the box has English translations underneath the Japanese text, so I'm just being completist about it. :)
    The outer box is fairly flimsy, really just meant to be a "meets minimum legal requirements" label sheath, very similar to the ones for Optimus Primal (RotB) and JAXA Optimus Prime. White text and logos on black, identifying
    this as Optimus Prime (no mention of Orion Pax) from Transformers One, and
    that it's an "Authentic TakaraTomy product as sold in Japan." It's 12" (30.5cm) tall, 10" (25.5cm) wide, and 4.75" (12cm) deep. The inner box is maybe a millimeter smaller in each direction.
    The inner box is a window box with maybe a third of the front covered in clear plastic, enough to show most of the robot mode and a couple of the accessories. In fact, even without opening the box, I can tell it's bigger than it needs to be, precisely so it looks more impressive on the shelf
    (which isn't really a concern here, as any shelves that have it won't remove
    it from the black sheath box). It has the TFOne trade dress, but as common with TakaraTomy releases the box is rather busier, with more insets and callouts and the like.
    On the front, the bottom half is dominated by renders (or maybe just photos, actually) of the toy in both modes (robot having mask-off face)
    against the blue cityscape background used on other TFOne toys, with the Japanese version of the logo (interestingly it keeps ONE in English, only translating Transformers) and a nameplate that calls the character Brave
    Leader Optimus Prime. My translation app caught text below that which does
    the usual disclaimers about the image maybe not matching the toy, plus trademark ownership. Along the left border are insets showing various features, such as face-changing (Mask On and Mask Off), the Matrix, flip-down Energy Cannons in vehicle mode, and the Energy Axe. On top is the robot with mask on and shoulder cannons flipped out. The right side has the various
    logos and art of Optimus Prime with mask up, while the left side uses the quartet (Orion Pax, D-17, B-127, and Elita-1) also seen on US release TFOne toys, but with the Japanese logo.
    The back repeats the insets from the front but bigger with some
    additional text, including showing the Energon Cannons deploying in both
    robot and vehicle modes.
    Face Change extra text: "You can choose between mask on and mask off!"
    Matrix extra text: "You will be able to have a Matrix!"
    In the lower right is an inset showing the contents, which is just the main figure, the axe, the Matrix, and the instructions. All but the instructions are visible in the closed package. The transformation steps are not listed on the box itself.
    The bottom of the box has the usual legalese, including a short bit in English saying that customer service is only available to Japanese customers buying the toy in Japan. I'm not even gonna try the QR code.
    The inner cardboard tray has random tech/energy details consistent with other TFOne products. The robot and accessories are held into a fairly
    sturdy plastic blister tray, with the instructions in a bag taped to the back of the blister. The instructions are on glossy paper with black linework and red accents, with a lot of text I will not be translating.
    The Matrix and Energy Axe are held into the blister at the top and upper right respectively by just the blister shape, while six double plastic ties
    and two single-ply ties hold the robot with mask on in the blister. As expected from looking at the outside, there is a lot of empty space on the right side. The depth of the blister means they didn't need to do anything
    to the feet to make things fit, so the toy is basically in Proper Robot Mode right out of the box.
    Now the moment of truth: can I remove it from the package without
    anything falling off? Yes, and it feels reasonably sturdy, although the backpack doesn't like to stay on and the energy cannon gimmick is a little
    too easy to trigger. I did pop one of the lower arms off entirely while
    trying to reset the energy cannon on the right shoulder, it's the type of swivel that snaps on (and off) fairly easily.


    AUTOBOT: BRAVE LEADER OPTIMUS PRIME
    Assortment: G1849
    Altmode: Cybertronian Truck
    Transformation Difficulty: 34 steps
    Previous Name Use: Yes (Brave Leader is probably not meant to be part of
    the official name)
    Previous Mold Use: None

    Robot Mode: Okay, so this one goes for the simple light gray look rather than the pale gold that some TFOne Optimus Prime toys used. While a bit bulkier than most TFOne designs, it's still very leggy and if you ignore the backpack where the entire cab shell is folded up it's pretty on-model in general. Thanks to the face-switch gimmick, you can even have your
    preference of mask up or down, although a side effect of that is that the
    face is bit small inside the helmet. Well, the mask-on face is. The no-mask face is pretty well proportioned, suggesting it got priority when it came to making room for the rotation inside the helmet. Otherwise, it has all the bits, like the mailbox-shaped shoulders, the -_- window in the chest, the not-smokestacks, etc. Other than the backpack, once you make sure
    everything's properly seated it's fairly stable. I suspect the ease with
    which the right bicep swivel on mine falls apart is a QC issue rather than endemic to the run, but it might just be an iffy design.
    8" (20cm) tall and in the usual Optimus Prime colors, if a bit more
    light gray than the usual. Clear bright blue plastic is used for the chest windshield, the Matrix, and the energy axe. There's two shades of red
    plastic with very faint metallic flake bits, the brighter is used on the
    chest front parts that aren't the window, the outer shells of the upper arms, and most of the backpack shell. The darker plastic is used for the inner
    faces of the upper arms, the hinge roots at the shoulders, the tops of the right and left third of the torso, and panels on the backpack that are slid
    out a bit. Light gray plastic makes up the rotating face piece, the base of the neck, the not- smokestacks, elbows, forearms, pelvis, hips, thighs, inner knees, the flip out cannons, and some struts inside the backpack. A gunmetal plastic is used sparingly, on the top of the backpack, the shoulder lifting hinges, and the triggers for the flip-out cannons. The helmet, hands, and boots are medium blue plastic. The head and boot shells are a shinier
    version, while the rest (including the wheels on the backs of the boots) are
    a duller and probably more flexible plastic.
    Both sides of the face piece are painted over in silver with "AllSpark Blue" eyes, including the area around the masked face's eyes that is often
    the same blue as the helmet. The cheekguard fronts and helmet tablet are
    also silver. Additional silver is on a bit at the bottom of the chest, the things on the sides of the boots that aren't fuel tanks, and alternating with gunmetal for the shin vents. Gunmetal is also used on most of the abdomen front. There's a few little bits of yellow on the lower chest (inside that silver bit) and on the belt buckle area. The Matrix is painted gold except over the interior gem part. There's a little bit of red paint on the top of the clavicle area because part of the chest-opening hinge is clear blue plastic, but it blends in fairly well.
    The neck is a ball joint with the socket in the back of the helmet, but it's difficult to get the head to just tilt back without also opening up the hinge for face-swap or unsnap the collar piece from its position. Smooth swivel waist, not blocked by backpack kibble. The shoulders are a bit meh, connected only by simple hinges so that they kinda flap there...the needs of the energy cannon gimmick preclude a more solid-looking connection, I guess. But they have hinge and swivel for a full range of motion. There's swivels right above the hinge elbows, prone to popping out on mine. The wrists are swivels plus have swing-down transformation hinges, and the hands open up
    with mitten joints. Pinned hinge and swivel hips with the swivels ratcheting (four clicks for 90 degrees), but the hinges are kinda high up due to the shallow V shape of the pelvis, so lifting the legs outwards too much looks weird. Thigh swivels just below the hips. Smooth hinge knees, ankles can wiggle back and forth as well as front to back, but not a lot in any
    direction. The chest has hinges at top and bottom to open up and display the Matrix, but the not-smokestacks are fixed in place by large rivets.
    Those rivets are at the bottom of 5mm hexagonal sockets, at least, and there's also 5mm hex sockets on the outer faces of the forearms, the outer faces of the boots, and two on the back of the backpack near the upper edge. There is a 3mm socket in the back of the pelvis. The ends of the not- smokestacks are 3.5mm in diameter, so not useful for anything, but the shape makes me wonder if they were designed to be 3mm and then just got scaled up.
    The face swap gimmick involves tilting the top of the helmet back, exposing the face chunk which can be rotated if you have small fingers or a
    lot of patience. It's a stiff enough swivel that a bunch of stuff is likely
    to come apart nearby in the process and need to be realigned when you're
    done. As noted above, the no-mask face is better proportioned, the masked
    one seems shrunken and pinched.
    While I've already complained a bit about the sacrifices made for the energy cannon gimmick, it could've been a LOT worse if they'd tried to make
    the two spring out simultaneously. As it is, each has its own trigger at the back of the upper arm. Pushing them up (or forwards in vehicle mode) makes
    the outer shells of the upper arms pop outwards, releasing the cannons to spring out and point forwards. The barrel tips are truncated cones, no
    attempt to put 3mm or 5mm studs/pegs on the ends. Well, there's a super shallow (less than a millimeter) stud at each barrel's end, but it's a little less than 3mm wide and way too short to hold anything. The barrels are about 2cm (under an inch) long. It's a bit tricky getting them reloaded so the shoulders can close.
    Pushing up on the collarbone area opens up the top two thirds of the chest, and it's easy to open the bottom third once that's out of the way, revealing a spot for the Matrix. When installed, the Matrix is visible
    through the chest window, which is nice. What's less nice is how difficult
    it is to get the Matrix back out of the chest, even though the socket on the back of the Matrix is slightly larger than 5mm. There just isn't room around it to get any leverage with human-sized fingers. And considering tiny
    fingers, Optimus's are too big to fit into the handles on either side, he has to hold it with his thumbs. Well, one thumb and the other hand just sort of resting around it, there's not enough range of motion to get both thumbs in. It's a single piece of clear blue plastic hollow in back, with most of it painted gold except the randomly-faceted "actual Matrix" part. The whole
    thing is 18mm tall and 34mm wide.
    The energon axe is two pieces of clear blue plastic fused together, so
    the hollowness is all inside. It uses the "ball with a 5mm peg inside it
    wraps around the fist to look like the axe replaced the hand" method that's more common, although several TFOne toys tried the "molded fingers around the energy ball" thing with limited success IMO. Additionally, a 5mm peg sticks out from either side at the base of the main blade, and in theory you could stick the Matrix on there for a "well, Prima's sword does it" thing, but it's really loose and sort of spins around on the peg. The whole thing is 3.5" (9cm) long, and is meant to store in robot mode using one of the side pegs
    and either of the backpack sockets.

    Transformation: Okay, I barely managed to get this done without looking
    at the instructions, there's some unintuitive panel folds. Also, getting all the tabs into place was an exercise in moderate frustration, as this is one
    of those designs where none of the intermediate steps is stable, securing one tab is likely to pop two others out. Once completed it's stable, but even
    once I figured out where everything was supposed to go, getting it to stay there was tricky.
    Pretty much the entire cab is folded up in the robot's backpack, the
    robot torso hides inside the unfolded shell. The shoulders are on struts
    that rotate, but they should only go down 90 degrees rather than the more common 180 degrees, which is one of the bits that stumped me for a few
    minutes. I guess I'm used to TFOne OP cabs being on the short side
    vertically speaking, so the fact that this extra step exists to make the cab taller evaded me initially.
    Another potential difficulty is in getting the panels on the inner
    faces of the boots open so that the shins can collapse into the boots. One
    of them has a little tab that's used in helping secure the vehicle mode underside, but the other does not and I had trouble getting it popped open without using a knife. The joints for getting the thigh to collapse partly into the boot are also quite stiff at first.
    Going back to robot mode is mostly a lot simpler, I only really found
    two problem points. One is that the heel spur joints are fairly stiff, and I just couldn't get enough purchase on them with my fingernails to even try to get them out, I had to use a knife. The other is more of a learning curve thing, the wrong-red panels on the sides of the cab (see below) need to be pulled straight out and the folded bits folded in the right way to get the windshield chunk into the backpack interior. (As noted in the unboxing bit, the backpack doesn't really peg together that firmly, and it's intrinsic in
    the design rather than just something that might've been shaken up in shipping.)

    Altmode: Well, it's basically Orion Pax/Optimus Prime's late-movie truck mode, with the not-smokestacks on the shoulders making for side-mounted cannons. The pop-out cannon gimmick still works in this mode, so there's no need for a removable piece to show the middle cannon barrels. While some
    robot bits are visible, they did a pretty good job of using the plethora of panels to cover up most of the gaps, with the only bad angle being "from underneath," and even that's sealed up better in the back half than usual. There is a bit of a dropped ball, though, as panels on the upper parts of the cab sides are a noticeably darker red plastic than the rest of the cab. It doesn't seem like they need to be more flexible or something to require a different kind of plastic, and they're both equally dark on the two sides so
    it seems unlikely to be a one-off bad batch variation. Checking with UV
    shows that there are two other red plastics that look the same under normal light but different under UV, which makes me wonder why they didn't color- match as well on these?
    6.75" (17cm) long in the usual red, light gray, and blue of an Optimus Prime. The windshield, through which the Matrix is visible inside the robot chest (nice alignment job, designers!) is clear blue plastic, the bumper and lower grille piece on the cab front is light gray, and dark gunmetal plastic
    is used for most of the rear wall and some greebles visible inside the cab.
    The rest of the cab shell is various red plastics. Gunmetal plastic is also used for the bridging pieces in back that include the trailer hitch socket. Some of the light gray pelvis and forearm bits are visible behind the cab,
    the rest of the back half is just the boots with the toes pointed and panels closing the gaps. The shoulders are now the side fenders, with the addition
    of little red coaster wheels that folded out. The blue cylinder coasters on the backs of the boots finish off the rolling ability.
    The only new paint in this mode is on the cab shell. There's some
    silver bits on the roof, plus the upper grill and some stripes on the front. The stripes are molded to continue onto the sides, but not painted there. Gunmetal paint is used for the rooftop lights, as well as on some of the back wall that's red plastic, and it blends in with the gunmetal plastic
    reasonably well. All of the boot paints are visible. No Autobot symbol,
    which is as it should be, the faction didn't really exist yet by the end of TFOne.
    The shoulder and boot-side sockets remain available, and there's one in each rear corner of the roof. The trailer hitch provides another socket in
    the back, and the 3mm socket from the back of the pelvis is now on the underside a few centimeters behind the center of mass.
    While there is a trailer hitch socket, it's a little too high up for the Earthrise-style Optimus Prime trailer. It seems to have been included mainly because one is expected, and it's a little bigger than 5mm so that any
    trailer peg you might find that works will be loose enough to articulate properly. This also means it's a bad place to store the axe, despite being visually better than the recommended side fender placement.
    The toy rolls okay on its six wheels/casters. There's no articulation beyond the energy cannon gimmick and the fact the wheels turn. In this mode, the cannons only flip 180 degrees, so they point vehicle-forwards rather than robot-forwards (which would be down).

    Overall: Well, it's bigger and has more going on than a modern Leader class, and even with the import tax it's cheaper than a Commander, so I'd say the price is reasonable for what you get. I'm not thrilled by how often I
    had to get out a knife to pry things open or apart, nor by how easily the backpack falls open in robot mode, but it's a pretty good toy overall. Definitely the best TFOne Optimus Prime toy, but the competition wasn't all that stiff.


    Dave Van Domelen, thinks a little more actual meatspace testing and adjusting of connections and tolerances could've boosted this to a strongly recommended toy, but it just has too many little problems and annoyances.


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)