Dave's Transformers Age of the Primes Rant
Sentinel Prime (Mobile Command Base)
Permalink:
http://www.eyrie.org/~dvandom/BW/AoP/Sentinel
Okay, this is technically a major retool of the Tarn/Bludgeon mold
family, but with very few reused parts. It comes with the Conduit, which is
a display disk for all thirteen Relics if you want to do that, and the
minimal storytelling around it is that Sentinel Prime used the Conduit to siphon power from the Relics after the Primes vanished (suggesting a more One-Like situation where all thirteen were dead, rather than the Aligned one where some were merely hiding). This isn't TFOne's Sentinel Prime, though, it's clearly based on the IDW orange tyrant, last seen as a Titans Return toy that retooled Astrotrain.
https://www.eyrie.org/~dvandom/BW/Legacy/VTarn first version of the
mold.
CAPSULE
$57.99 at Hasbro Pulse, which feels like a bit of a ripoff for a
retooled Voyager with a display piece accessory.
Sentinel Prime: Tarn was recommended, but this is very different and a
lot more expensive. If this was sold as a Voyager without the Conduit, I'd definitely recommend this too. As it stands...hard to ignore the price
bump.
RANT
Packaging: A windowless box slightly bigger than a Voyager box, with the Age of the Primes trade dress. In place of a window, there's a full front
art piece showing Sentinel Prime gesturing dramatically as the Relics of the Primes lower into the Conduit.
The box is 9" (23cm) wide, 8.75" (22cm) tall, and a little over 3" (8cm) deep. The top has the gallery of the Primes, the right and left sides both have comic-style art (likely a filter on the toy renders) of the upper half
of robot mode behind the front of vehicle mode. The back has renders of both modes, with the empty Conduit held as a shield by the robot mode. An inset shows the back side of the Conduit and how to attach Relics (blue-outline versions of Vector Prime's sword, Liege Maximo's gun, and the Enigma of Combination are shown attaching) as well as The Conduit in Cybertronian
script. There is no inset showing the Conduit attached in vehicle mode, although if you know where to look the edge of it is barely visible peeking
out from the back of the vehicle.
What the box does NOT make clear is that the shield part is just the center of the whole Conduit, and the inset doesn't show the back of the
shield, it shows the shield inserted into a much bigger ring. I was kind of hoping that the retooling would result in a significantly bigger robot to justify the almost-Leader price, but it looks like most of the money went
into the Conduit.
The robot is held on the left side of the inner corrugated cardboard
tray (no printing, since it's not visible until you open the box) by three double ties around the chest and legs and two single ties around the
forearms. A taped-in cardboard strip secures the outer ring of the Conduit
to the lower right, while a taped-down baggie in the upper right holds the shield hub and the guns.
The instructions show the robot mode holding the Conduit in its hands by the edges, but do not show that it can also just be attached to the backpack
by any of the 5mm sockets (with the shield it has the Relics facing backwards but all of them can be attached, if you remove the shield part you can still get a ring on the backpack but that requires using one of the Relic sockets). The instructions also don't show that the outer ring can split into halves.
Out of the box, the heel spurs need to be unfolded and the back cannons attached.
AUTOBOT: SENTINEL PRIME (I mean, the worst Autobot ever, but still an
Autobot)
Assortment: G2931
Altmode: Mobile Command Center (a guess on my part)
Transformation Difficulty: 26 steps (Tarn had 27)
Previous Name Use: Yes, although this version just in Titans Return
Previous Mold Use: Legacy
Origin Universe: IDW G1
This is sort of a successor to the Throne of the Primes set that let you put all the Prime Masters into a single display. That, of course, was mostly cardboard and a cheap plastic tray, but mine is still on display albeit gathering dust. This is a pale imitation of that set, which I suppose sums
up Sentinel Prime himself.
Oh, in case you're new to the fandom, here's a very short and incomplete background on this version of Sentinel Prime (unrelated to the "the Tick as a Transformer, but a jerk" version in Transformers Animated, or to the ones in the live action movies or Transformers One). Originally, in the older G1 stuff, he was just a name, one of Optimus Prime's predecessors. No real details, just that he used to bear the Matrix and hold the title of Prime. Later on, during the "neo G1" stories, Megatron acquired a more sympathetic background. Sure, he'd become a tyrant, but like many tyrants he'd started
as a rebel against a different tyranny. This required that some previous
ruler of Cybertron in the line of Primes be horrible enough that rebelling against him would justify the sorts of acts that led Megatron down the road
to becoming another tyrant. While the IDW continuity established a number of pretty bad Primes, Sentinel Prime ended up tapped as the absolute worst one.
He had the Matrix, but wasn't really worthy. This basic idea got preserved
in the TF One version, but not any version of his original appearance.
Titans Return gave us the first toy of the orange tyrant and they even used that design in the comics for a while. This new toy, however, also matches (somewhat) a version seen in previous media, with the added new twist of explicitly stealing the powers of the Thirteen to bolster his rule.
Shared Parts: Compared to the original Tarn mold. Everything from the bicep swivel down is the same. The hips, thighs, knees, and upper shin core are also the same, as are the ankle joints. There might also be some
internal struts that are the same, but everything else is different. The
upper arms have the same rough shape and transformation, but are entirely new tooling. The treads on the torso sides are the same, but the way they
connect to other parts has changed. (They still have the slider nubs,
despite the toy's addition of small wheels.)
The extra height of this figure comes mostly from the boots, he's
wearing elevator shoes (made from actual elevators?) to look taller.
Robot Mode: As a predecessor of Optimus Prime, he has Optimus-like elements in his head, although with extra frills to make it distinct beyond just the color. And where Titans Return Sentinel Prime was straight up
orange (and had a more Optimus-like head because of the limitations of the Titan Master design), this is more of a golden yellow with some red and
orange. Still not a Good Guy color scheme, a lot closer to crazies like Sunstorm or Scoop. Or, you know, Unicron. Colors aside, he also has a fake vehicle cab molded onto the chest, which gives the toy more of a feeling of trying to approximate a pre-existing design, such as the one seen in
Spotlight: Optimus Prime back in 2007. The head design, if not the exact colors, came from Megatron Origin #1, as did the general shape of the vehicle mode. The fact they started with Tarn means they're not going to get too
close to any of the comics designs, but they did a pretty good job with what they had. Anyway, there's also little wheels on the tops of the shoulders
and on the butt, something Tarn and Bludgeon don't have, as their altmodes
just slid along on little nubs...so some of this overblown budget did go to a higher part count.
7" (18cm) tall at the top of the helmet crest, 7.75" (20cm) tall at the tops of the backpack cannons. Mostly golden yellow with some red, orange,
and gray. Medium gray plastic is used for the back of the torso and pelvis, the hip joints, the very short bicep bits, the collar area, the shoulder and butt wheels, the inner bits of the knee joints, parts of the boot interiors, the heel spurs, the guns, and the shield. There's actually two slightly different values of gray, but I'm not entirely sure that's intentional or if it's just a result of the more rigid plastic taking color differently than
the softer bits like the heel spurs. Red plastic is used for the armor
panels on the forearms, the armor panels on the fronts of the hips (he has
the same fake waist thing as Tarn), and blocks in the interior of the boots. Dark orange is used for the shoulder hinges, hinges between the shoulder pieces, elbow hinges, hands, and ankle hinges. The Tarn-style treads on the sides of the torso are black plastic, and everything else is golden yellow plastic.
Red paint that's noticeably darker than the red plastic is used for the faceplate, helmet crest, upper waist front, and pelvis centerline. There's canary yellow paint on the chest, bits on the shoulder fronts, the right and left thirds of the shins, and a U-shape on the kneecaps. The fake windows on the underside of the chest and the real ones on the toes are silver, as are some details on the lower shins and angled stripes on the shoulders. Matte black paint is used for the centerlines of the shins, the bars across the
real and fake windshield, the bumpers on the toes, vents under the pecs, and the backs of the shoulders. Some details on the top and bottom of the pelvis front are painted gunmetal, as is a sort of beltbuckle. The eyes are bright blue, and an Autobot symbol in red with white outline is printed above the
left pec vent. (Not all versions of Sentinel Prime have an Autobot symbol,
in some continuities he just rules all of Cybertron, with the Autobots being founded after the Decepticons as a sort of counter-revolution.)
The neck is a restricted ball joint that can turn or tip back, but has
no side to side wiggle. The waist is a smooth swivel. The shoulders lift up at hinges connected to the torso and rotate on swivels at the other ends of
the struts, there's hinges between the upper arm chunks and the tiny bit of bicep above the elbow, mostly for transformation but they also let the arms pose more naturally. Swivels just above the hinge elbows, the wrists swivel, and the fingers move on a mitten hinge. The forearm panel is on a legacy
hinge that is no lonter actually used for transformation. Pinned hinge and swivel universal joint hips, upper thigh swivels, double hinged knees with hinges on the kneecaps that let them bend in a bit to follow the thigh. The ankles have inset hinges at the top and front-back hinges at the bottom. The heel spurs are hinged for transformation, but the hinges are too loose to meaningful contribute to articulation.
The hands have 3/4 circle 5mm sockets, there's two 5mm sockets on the right forearm and one on the left. Both shoulders have outward-facing 5mm sockets. There's a 5mm socket on either side of the top of the backpack dedicated to the cannons there, and another on top of the backpack that's mainly used in vehicle mode to hold the rifle. The lower part of the back of the backpack has a hinged piece that has both a 5mm socket and a 5mm peg,
which can be used to store the shield. The outer face of each boot has a 5mm socket, and the underside of each heel spur has one. You can probably just cover him in Relics without needing the Conduit. There is a 3mm socket on
the back of the pelvis. There's a few more sockets on the sides of the backpack, but they're either screw holes or mirroring the screw holes and they're narrower than 5mm.
The rifle has a vague resemblance to Optimus Prime's, but with extra greebles that give a sort of tryhard AR-15-fan look to it. There's
underslung and overslung barrels, rockets strapped to the sides, it's busy
like the badguy's stupid gun in Fifth Element. It even has a big vent on the front of one of the big aesthetic chonks, which could stand some black paint
to match the other vents on the figure. On the downside, the grip peg is
kinda short due to how it has to seat all the way into a socket for vehicle mode, which means the figure's grip on it is not great. There's a tab on the left side of the stock end that goes into one of the slots on the side of th ebackpack for storage, either pointed down on the left side (looks a bit awkward) or pointed up on the right side (requires removing the shoulder
cannon on that side, but that can go in any number of other 5mm sockets).
The muzzle is a 3mm socket, in case you have any Fire Blasts that work with those. The whole thing is 3" (7.5cm) long and just unpainted medium gray plastic.
The backpack cannons are identical and I guess meant to evoke the smokestacks of his successor, they can even be moved to the shoulders if you want to play that up even more. They're identical pieces of medium gray plastic (the softer type), 1.75" (4.5cm) long with some hollows on each side, kind of alternating to avoid needing to make it from two pieces glued
together. The 5mm pegs at the bottoms have holes through them like "dead" Mini-Con hardpoints, and the barrel ends are every so slightly thicker than
5mm in diameter, you can cram one into a socket and it'll stay sort of. The intentional pegs are also a little thicker than the rifle's, as they stay pretty firmly in the hands as pistols.
Finally, separate from its role as the core of The Conduit (below), he
has a shield. It's a 2.25" (5.5cm) diameter disk with a vaguely Matrix-like boss in the center that is then sunken inward to a 5mm hole through the
middle that has a six-pointed star around it (Star Optimus Prime's sigil).
The front side is painted in dark gold with gunmetal showing through the thin spots like edges, a nice aged metal sort of effect. The back side has a 5mm peg near one edge, and attaching that to the 5mm socket on the left forearm puts the center over the back of the hand to make it look like he's holding
the shield by a magnetic clamp on the hand. The central hole can also go
onto the peg on the backpack for storage. If you don't want to put Star Optimus Prime's Zodiac orb on the shield, there's a few "squib" style Fire Blasts that fit nicely if you have them left over from a few years back.
The Conduit: This is a dark gold disk formed from the shield plugged
into a ring that splits into two pieces (not that you can do anything with those pieces separately, although I guess this would let you put them into an Optimus Prime trailer). The shield part has the Star Optimus Prime symbol at its center and a socket for his Zodiac Orb, but no name. The ring is split into twelve segments with the sigils and inscribed names (in regular English, not Cybertronian) as well as ways to attach their Relics. Starting with
Prima Prime, going clockwise they're Alchemist Prime, Quintus Prime,
Amalgamous Prime, Nexus Prime, Solus Prime, Onyx Prime, Liege Maximo,
Micronus, Alpha Trion, Megatronus, and Vector Prime. The connection points sometimes cut out part of the name, while other connectors cover part of the sigils.
About 5" (13cm) in diameter, all made from medium gray plastic and
mostly covered in dark gold paint. The sigils are gunmetal, and it looks
like the disk might've been covered in that paint first before the gold was added, since the panel lines and edges are also more gunmetal than just
gray.
Most of the connectors are 5mm sockets, with Solus Prime's being raised
on a collar. Onyx Prime's is just a tab, while Vector Prime's is a clip for holding the hilt of the sword (as a Legacy toy, it wasn't designed to be attached to this). The rim around the edge in back means that shorter pegs can't attach to the backside. There's also a couple of odd 6mm sockets on
the back which don't seem to be used for anything. There's other details on the reverse side that also suggest undocumented features.
On its own without the shield, the ring can act as a display base for vehicle mode, which can rest stably with the front cannons flanking Solus Prime's clip. I suppose the robot can stand on it too, there just isn't anything to lock it in place...wait, I'm wrong there. The tab for Onyx
Prime's Relic fits perfectly into a slot in either heel spur. The ring can also attach to the robot's back as a big fancy armor element in case Sentinel Prime wants to hang out in the Age of Samurai.
http://www.dvandom.com/images/SamuraiSentinel.JPG
Transformation: Okay, this is almost entirely unlike Tarn's, and the forearm panels don't need to move at all. It wasn't too hard to figure out
the basics from just looking at the picture on the box back, but I got hung
up trying to get the shoulderpad tabs to stay in place...it turned out that there are also tabs on the top of the torso that need to go into slots on the backpack panels ALL the way, or the shoulderpad pieces will pop out of
place.
The overall effect is of Sentinel curling up into a fetal position and gripping his gun between his knees, and the fact that the robot hands are
just sort of loosely gripping the kneecaps doesn't do anything to dispel that impression.
Vehicle Mode: So, I call it a mobile command center because it reminds
me of the carrier vehicle from Zoids, if less snail-shaped. The feet become the cab, with all the rest of the robot just forming a bulky chunk on
treads. While it can't open up to reveal smaller bots, it feels like the
sort of vehicle that would. It's sort of a halftrack, as it retains small
bits of tank tread from Tarn, but the front end rests on a single small
wheel. The small wheels on the tops of the shoulders form the remaining supports, so the treads don't even touch down, but they're definitely
supposed to support the vehicle in-story. The backpack guns have moved to under the feet as front end weapons, and the rifle is firmly attached on top behind held not just by its 5mm peg grip but also tabs from the kneecaps that go into either side. Thus, three fixed-forwards guns and nothing in any
other direction. The shield can store on back using the peg from the robot back, but the ring part of the Conduit cannot attach anywhere.
5.5" (14cm) long counting the cannons and shield, 3.5" (9cm) tall, and
the yellows are more dominant in this mode with most of the gray on the
inside or underside. The details on the feet line up now to become a cab, which I guess is supposed to be what the fake cab on the chest is meant to represent. No new plastics or paints are visible in this mode, but a lot of bits are hidden. Well, the orange hinges inside the upper arms are more visible now, I guess. Unless you cover them with the shield.
It rolls poorly on the three little wheels (two spin well, one doesn't,
I think its pin was driven in a little too hard so the wheel is pinched). There's two 5mm sockets on either side (outer face of boot, forearm armor)
and on the back there's that bit that combines a 5mm peg and a 5mm socket
plus can be folded down. The shoulder cannon tips are technically 5mm pegs
but they aren't in a useful position here.
The fold-down bit in back is, in fact, the right height and length to
let an Earthrise-style Optimus Prime trailer attach to the back, as seen
here:
http://www.dvandom.com/images/SentinelTrailer.JPG The instructions
don't even show that the piece folds down, so this is a very undocumented feature. I was asked to check the Laser Optimus Prime trailer as well, but
it doesn't work here as its peg is too far back.
Overall: Does making it slightly taller and adding the Conduit make this Voyager worth almost Leader price? Not even close. I mean, if they included "dummy" versions of all the Relics (perhaps all made of unpainted clear blue plastic) that'd come close, but this was overpriced by at least ten bucks.
Dave Van Domelen, now to get to the second wave of Hot Wheels Collaborative before a local store runs out of $15 clearanced toys from that way, in case I like either of them enough to want spares.
--- PyGate Linux v1.5.19
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)