Arnie wrote:

Panasonic DMR-ES40V with an F60 code.

Perplexity AI will give you an answer.

--- PyGate Linux v1.5.12
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)

John Keiser wrote:

Arnie wrote:

Panasonic DMR-ES40V with an F60 code.

Perplexity AI will give you an answer.

On the DMR-ES40V, an F60 error almost always means a low-voltage fault
caused by failed electrolytic capacitors on the power/video processing
board, and the unit will usually not respond to front-panel buttons or
eject.
?

What F60 Specifically Means
F60 is a general video/signal-processing power error, typically ?low
voltage to the signal processing board.?
?
?

On the ES40V/ES45V/EZ37V family this has been repeatedly traced to bad electrolytic capacitors (often visibly bulged or leaking) on the power
supply / video board.
?

Typical DIY Fix (electronics skills required)
If you are comfortable opening and soldering:

Unplug the unit and remove the top metal cover (several screws on sides
and back).
?

Locate the small board associated with video/signal processing and
power (in some models the video board ?floats? above others in the
back).
?
?

Inspect electrolytic capacitors for bulging tops or leakage; on at
least one ES40V repair, replacing a 1000 ?F 6.3 V cap on that board
cleared F60, and the tech pre-emptively replaced a second identical cap.
?

Desolder and replace suspect caps with equal capacitance and voltage
(or higher voltage rating), using quality low-ESR parts.
?
?

Reassemble and power on; a normal boot to ?HELLO? and the flashing
clock indicates success.
?
?

If You Don?t Solder
Local electronics/TV repair shops or hobbyists can usually do this once
you tell them ?Panasonic DMR-ES40V with F60, likely bad electrolytic
caps on power/video board.?
?
?

Because many ES40V units with F60 are sold cheap and working ones bring
higher prices, some people buy a faulty one for parts or swap in a
known-good board, but that is more involved and not guaranteed.
?

Quick things you can still try
They rarely fix F60, but are harmless:

Unplug for several minutes, then plug back in and see if it cycles past
F60.
?

If a tape is partly lowered, sometimes ejecting before trying the reset
helps, but F60 usually persists until the capacitor issue is addressed.
?

If you tell me whether you?re willing to open it up and whether you
have soldering gear, I can outline board and capacitor locations
step-by-step in more detail.

--- PyGate Linux v1.5.12
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)

On 01/03/2026 20:49, John Keiser wrote:

John Keiser wrote:

If a tape is partly lowered, sometimes ejecting before trying the reset helps, but F60 usually persists until the capacitor issue is addressed.
?

If you tell me whether you?re willing to open it up and whether you
have soldering gear, I can outline board and capacitor locations
step-by-step in more detail.

Over time, the most basic "fix" to get an electrical item working again
has been to change the fuse, save first checking for the expiry of other
items that have a more definite lifetime like batteries and such.

However since the dawn of The Internet, this resource is awash with
human experience stories on how replacing capacitors is an amazing thing
in bringing some electronics back to life, but no one really details
anything else positive when that fix hasn't worked for them - mainly the
rest item is too complex to fix or not worth their time.

AI has read the capacitor story as well and is placing great weight and
belief in it, having read no other information. Add to it confirmation
bias, and also the "reward stick" used in programming large language
models, the AI will always try it impress you at all cost, because
ultimately it "thinks" with probabilities, not understanding.

(But it is still an amazing tool!)

If you want to get a better answer, include the following in your prompt.

"If you don't know the answer, please don't make it up. If you do find
the answer, please detail how you came about it."

--
Adrian C

--- PyGate Linux v1.5.12
* Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)