• Olympus C-5060 with PS-BLM1 Li-ion battery.

    From peter@3:633/10 to All on Thursday, February 12, 2026 08:56:54
    Hi,

    I was given the camera with power adapter and one battery. No
    external battery charger. According to Wikipedia, would have been
    manufactured about ten years ago.

    Battery in the camera, external power connected. If the camera is
    switched off, no light or display indicates the battery may be
    acccepting power. If the camera is switched on, a green light is
    left of the viewfinder.

    If the battery is accepting charge, it's not enough to power the
    camera. With external power disconnected the camera has no sign of
    life except when switching off.

    Should the battery charge in the camera?
    The battery is too old to use?
    Find a new battery?
    Find an external charger?

    Thanks, ... P.



    --- PyGate Linux v1.5.11
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Jeff Liebermann@3:633/10 to All on Thursday, February 12, 2026 12:41:47
    On 12 Feb 2026 08:56:54 -0700, peter@easthope.ca wrote:

    Hi,

    I was given the camera with power adapter and one battery. No
    external battery charger. According to Wikipedia, would have been >manufactured about ten years ago.

    Battery in the camera, external power connected. If the camera is
    switched off, no light or display indicates the battery may be
    acccepting power. If the camera is switched on, a green light is
    left of the viewfinder.

    If the battery is accepting charge, it's not enough to power the
    camera. With external power disconnected the camera has no sign of
    life except when switching off.

    Should the battery charge in the camera?
    The battery is too old to use?
    Find a new battery?
    Find an external charger?

    Thanks, ... P.


    Charger:
    <https://www.ebay.com/sch/i.html?_nkw=Olympus+C-5060+battery+charger>

    Batteries:
    <https://www.ebay.com/sch/i.html?_nkw=Olympus+C-5060+battery>


    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558


    --- PyGate Linux v1.5.11
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Theo@3:633/10 to All on Friday, February 13, 2026 15:52:57
    Jeff Liebermann <jeffl@cruzio.com> wrote:
    On 12 Feb 2026 08:56:54 -0700, peter@easthope.ca wrote:

    Hi,

    I was given the camera with power adapter and one battery. No
    external battery charger. According to Wikipedia, would have been >manufactured about ten years ago.

    Battery in the camera, external power connected. If the camera is >switched off, no light or display indicates the battery may be
    acccepting power. If the camera is switched on, a green light is
    left of the viewfinder.

    If the battery is accepting charge, it's not enough to power the
    camera. With external power disconnected the camera has no sign of
    life except when switching off.

    Should the battery charge in the camera?
    The battery is too old to use?
    Find a new battery?
    Find an external charger?

    Thanks, ... P.


    Charger: <https://www.ebay.com/sch/i.html?_nkw=Olympus+C-5060+battery+charger>

    Batteries:
    <https://www.ebay.com/sch/i.html?_nkw=Olympus+C-5060+battery>

    If you have a variable current limit PSU I'd try to trickle charge the
    battery. Set the PSU to 7.6V (3.8v per cell) with the current limit at say 100mA. Apply to the + and - terminals of the battery. Watch the voltage across the battery rise. It should rise rapidly and then the rise should
    slow down around 7V and gradually rise from there. This means it's taking charge and is likely healthy.

    If it starts low but rises to 7.6V rapidly the battery has lost capacity; if
    it never rises then something has gone short circuit and it's scrap.

    Keep an eye on it and feel it regularly for anything overheating. As two
    cells in series it's riskier than a single cell because one going short
    could cause the other to become overcharged - I might be tempted to do this outside in case of fire.

    Theo

    --- PyGate Linux v1.5.11
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From peter@3:633/10 to All on Friday, February 13, 2026 11:54:40
    In article <klesok57fjbkqrjbkrin3kncervs2o8qv2@4ax.com>, Jeff Liebermann <jeffl@cruzio.com> wrote:
    Charger: <https://www.ebay.com/sch/i.html?_nkw=Olympus+C-5060+battery+charger>

    Batteries:
    <https://www.ebay.com/sch/i.html?_nkw=Olympus+C-5060+battery>

    Thanks Jeff.

    ... P.


    --- PyGate Linux v1.5.11
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From peter@3:633/10 to All on Friday, February 13, 2026 12:15:40
    In article <DKb*2i9yA@news.chiark.greenend.org.uk>, Theo <theom+news@chiark.greenend.org.uk> wrote:
    If you have a variable current limit PSU I'd try to trickle charge the battery. Set the PSU to 7.6V (3.8v per cell) with the current limit at say 100mA. Apply to the + and - terminals of the battery. Watch the voltage across the battery rise. It should rise rapidly and then the rise should slow down around 7V and gradually rise from there. This means it's taking charge and is likely healthy.

    Don't have a variable current limit PSU but have a varistat and wonder
    about getting the charger and trickle charging with the varistat.
    Connect through an ammeter and watch while increasing the AC slowly.
    May also be a way to connect a voltmeter across the charger output
    while the battery is in.

    If it starts low but rises to 7.6V rapidly the battery has lost capacity; if it never rises then something has gone short circuit and it's scrap.

    Keep an eye on it and feel it regularly for anything overheating. As two cells in series it's riskier than a single cell because one going short
    could cause the other to become overcharged - I might be tempted to do this outside in case of fire.

    Thanks for the explanation.

    Yes, will work outdoors and watch temperature.

    Thx, ... P.


    --- PyGate Linux v1.5.11
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Ed Vance@3:633/10 to All on Thursday, February 19, 2026 22:27:56

    In article <klesok57fjbkqrjbkrin3kncervs2o8qv2@4ax.com>, Jeff
    Liebermann
    <jeffl@cruzio.com> wrote:

    Thanks Jeff.

    ... P.

    --- SoupGate-Win32 v1.05
    * Origin: you cannot sedate... all the things you hate (1:229/2)


    Peter, I used a Olympus Stylus 7030 camera until it was dropped to ncw
    too many
    times.
    I looked at the links and saw your batteries are shaped differently
    from the
    one(s) I have.
    Olympus LI-42B came with the 7030.
    Also have a Kodak KLIC-7006 battery.

    To charge the batterys I bought DIGIPOWER Travel Charger model TC-500
    at Radio
    Shack years ago.

    It has A.C. plugs for USA and another attachment with round terminals
    that
    slips on the USA style terminals .

    With the TC-500 were 3 or 4 plastic adapters for different rechargeable batteries.

    I know your battery has different terminals than what i have, but maybe
    the
    TC-500 came with a battery adapter for your style battery.

    I would think possibly a local Camera store may have a product similar
    to what
    I bought for my system.
    HTH.
    Ed

    --- PyGate Linux v1.5.11
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From peter@3:633/10 to All on Wednesday, March 04, 2026 12:20:47
    In article <klesok57fjbkqrjbkrin3kncervs2o8qv2@4ax.com>, Jeff Liebermann <jeffl@cruzio.com> wrote:
    Charger: <https://www.ebay.com/sch/i.html?_nkw=Olympus+C-5060+battery+charger>

    Batteries:
    <https://www.ebay.com/sch/i.html?_nkw=Olympus+C-5060+battery>

    Jeff,

    I found the external battery charger. Now just need
    to buy a spare battery.

    Thanks for the link, ... P.



    --- PyGate Linux v1.5.12
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)